Release 4.11 drivers/media/usb/dvb-usb-v2/rtl28xxu.h
/*
* Realtek RTL28xxU DVB USB driver
*
* Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
* Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef RTL28XXU_H
#define RTL28XXU_H
#include <linux/platform_device.h>
#include "dvb_usb.h"
#include "rtl2830.h"
#include "rtl2832.h"
#include "rtl2832_sdr.h"
#include "mn88472.h"
#include "mn88473.h"
#include "qt1010.h"
#include "mt2060.h"
#include "mxl5005s.h"
#include "fc0012.h"
#include "fc0013.h"
#include "e4000.h"
#include "fc2580.h"
#include "tua9001.h"
#include "r820t.h"
#include "si2168.h"
#include "si2157.h"
/*
* USB commands
* (usb_control_msg() index parameter)
*/
#define DEMOD 0x0000
#define USB 0x0100
#define SYS 0x0200
#define I2C 0x0300
#define I2C_DA 0x0600
#define CMD_WR_FLAG 0x0010
#define CMD_DEMOD_RD 0x0000
#define CMD_DEMOD_WR 0x0010
#define CMD_USB_RD 0x0100
#define CMD_USB_WR 0x0110
#define CMD_SYS_RD 0x0200
#define CMD_IR_RD 0x0201
#define CMD_IR_WR 0x0211
#define CMD_SYS_WR 0x0210
#define CMD_I2C_RD 0x0300
#define CMD_I2C_WR 0x0310
#define CMD_I2C_DA_RD 0x0600
#define CMD_I2C_DA_WR 0x0610
struct rtl28xxu_dev {
u8 buf[128];
u8 chip_id;
u8 tuner;
char *tuner_name;
u8 page; /* integrated demod active register page */
struct i2c_adapter *demod_i2c_adapter;
bool rc_active;
bool new_i2c_write;
struct i2c_client *i2c_client_demod;
struct i2c_client *i2c_client_tuner;
struct i2c_client *i2c_client_slave_demod;
struct platform_device *platform_device_sdr;
#define SLAVE_DEMOD_NONE 0
#define SLAVE_DEMOD_MN88472 1
#define SLAVE_DEMOD_MN88473 2
#define SLAVE_DEMOD_SI2168 3
unsigned int slave_demod:2;
union {
struct rtl2830_platform_data rtl2830_platform_data;
struct rtl2832_platform_data rtl2832_platform_data;
};
};
enum rtl28xxu_chip_id {
CHIP_ID_NONE,
CHIP_ID_RTL2831U,
CHIP_ID_RTL2832U,
};
/* XXX: Hack. This must be keep sync with rtl2832 demod driver. */
enum rtl28xxu_tuner {
TUNER_NONE,
TUNER_RTL2830_QT1010 = 0x10,
TUNER_RTL2830_MT2060,
TUNER_RTL2830_MXL5005S,
TUNER_RTL2832_MT2266 = 0x20,
TUNER_RTL2832_FC2580,
TUNER_RTL2832_MT2063,
TUNER_RTL2832_MAX3543,
TUNER_RTL2832_TUA9001,
TUNER_RTL2832_MXL5007T,
TUNER_RTL2832_FC0012,
TUNER_RTL2832_E4000,
TUNER_RTL2832_TDA18272,
TUNER_RTL2832_FC0013,
TUNER_RTL2832_R820T,
TUNER_RTL2832_R828D,
TUNER_RTL2832_SI2157,
};
struct rtl28xxu_req {
u16 value;
u16 index;
u16 size;
u8 *data;
};
struct rtl28xxu_reg_val {
u16 reg;
u8 val;
};
struct rtl28xxu_reg_val_mask {
u16 reg;
u8 val;
u8 mask;
};
/*
* memory map
*
* 0x0000 DEMOD : demodulator
* 0x2000 USB : SIE, USB endpoint, debug, DMA
* 0x3000 SYS : system
* 0xfc00 RC : remote controller (not RTL2831U)
*/
/*
* USB registers
*/
/* SIE Control Registers */
#define USB_SYSCTL 0x2000
/* USB system control */
#define USB_SYSCTL_0 0x2000
/* USB system control */
#define USB_SYSCTL_1 0x2001
/* USB system control */
#define USB_SYSCTL_2 0x2002
/* USB system control */
#define USB_SYSCTL_3 0x2003
/* USB system control */
#define USB_IRQSTAT 0x2008
/* SIE interrupt status */
#define USB_IRQEN 0x200C
/* SIE interrupt enable */
#define USB_CTRL 0x2010
/* USB control */
#define USB_STAT 0x2014
/* USB status */
#define USB_DEVADDR 0x2018
/* USB device address */
#define USB_TEST 0x201C
/* USB test mode */
#define USB_FRAME_NUMBER 0x2020
/* frame number */
#define USB_FIFO_ADDR 0x2028
/* address of SIE FIFO RAM */
#define USB_FIFO_CMD 0x202A
/* SIE FIFO RAM access command */
#define USB_FIFO_DATA 0x2030
/* SIE FIFO RAM data */
/* Endpoint Registers */
#define EP0_SETUPA 0x20F8
/* EP 0 setup packet lower byte */
#define EP0_SETUPB 0x20FC
/* EP 0 setup packet higher byte */
#define USB_EP0_CFG 0x2104
/* EP 0 configure */
#define USB_EP0_CTL 0x2108
/* EP 0 control */
#define USB_EP0_STAT 0x210C
/* EP 0 status */
#define USB_EP0_IRQSTAT 0x2110
/* EP 0 interrupt status */
#define USB_EP0_IRQEN 0x2114
/* EP 0 interrupt enable */
#define USB_EP0_MAXPKT 0x2118
/* EP 0 max packet size */
#define USB_EP0_BC 0x2120
/* EP 0 FIFO byte counter */
#define USB_EPA_CFG 0x2144
/* EP A configure */
#define USB_EPA_CFG_0 0x2144
/* EP A configure */
#define USB_EPA_CFG_1 0x2145
/* EP A configure */
#define USB_EPA_CFG_2 0x2146
/* EP A configure */
#define USB_EPA_CFG_3 0x2147
/* EP A configure */
#define USB_EPA_CTL 0x2148
/* EP A control */
#define USB_EPA_CTL_0 0x2148
/* EP A control */
#define USB_EPA_CTL_1 0x2149
/* EP A control */
#define USB_EPA_CTL_2 0x214A
/* EP A control */
#define USB_EPA_CTL_3 0x214B
/* EP A control */
#define USB_EPA_STAT 0x214C
/* EP A status */
#define USB_EPA_IRQSTAT 0x2150
/* EP A interrupt status */
#define USB_EPA_IRQEN 0x2154
/* EP A interrupt enable */
#define USB_EPA_MAXPKT 0x2158
/* EP A max packet size */
#define USB_EPA_MAXPKT_0 0x2158
/* EP A max packet size */
#define USB_EPA_MAXPKT_1 0x2159
/* EP A max packet size */
#define USB_EPA_MAXPKT_2 0x215A
/* EP A max packet size */
#define USB_EPA_MAXPKT_3 0x215B
/* EP A max packet size */
#define USB_EPA_FIFO_CFG 0x2160
/* EP A FIFO configure */
#define USB_EPA_FIFO_CFG_0 0x2160
/* EP A FIFO configure */
#define USB_EPA_FIFO_CFG_1 0x2161
/* EP A FIFO configure */
#define USB_EPA_FIFO_CFG_2 0x2162
/* EP A FIFO configure */
#define USB_EPA_FIFO_CFG_3 0x2163
/* EP A FIFO configure */
/* Debug Registers */
#define USB_PHYTSTDIS 0x2F04
/* PHY test disable */
#define USB_TOUT_VAL 0x2F08
/* USB time-out time */
#define USB_VDRCTRL 0x2F10
/* UTMI vendor signal control */
#define USB_VSTAIN 0x2F14
/* UTMI vendor signal status in */
#define USB_VLOADM 0x2F18
/* UTMI load vendor signal status in */
#define USB_VSTAOUT 0x2F1C
/* UTMI vendor signal status out */
#define USB_UTMI_TST 0x2F80
/* UTMI test */
#define USB_UTMI_STATUS 0x2F84
/* UTMI status */
#define USB_TSTCTL 0x2F88
/* test control */
#define USB_TSTCTL2 0x2F8C
/* test control 2 */
#define USB_PID_FORCE 0x2F90
/* force PID */
#define USB_PKTERR_CNT 0x2F94
/* packet error counter */
#define USB_RXERR_CNT 0x2F98
/* RX error counter */
#define USB_MEM_BIST 0x2F9C
/* MEM BIST test */
#define USB_SLBBIST 0x2FA0
/* self-loop-back BIST */
#define USB_CNTTEST 0x2FA4
/* counter test */
#define USB_PHYTST 0x2FC0
/* USB PHY test */
#define USB_DBGIDX 0x2FF0
/* select individual block debug signal */
#define USB_DBGMUX 0x2FF4
/* debug signal module mux */
/*
* SYS registers
*/
/* demod control registers */
#define SYS_SYS0 0x3000
/* include DEMOD_CTL, GPO, GPI, GPOE */
#define SYS_DEMOD_CTL 0x3000
/* control register for DVB-T demodulator */
/* GPIO registers */
#define SYS_GPIO_OUT_VAL 0x3001
/* output value of GPIO */
#define SYS_GPIO_IN_VAL 0x3002
/* input value of GPIO */
#define SYS_GPIO_OUT_EN 0x3003
/* output enable of GPIO */
#define SYS_SYS1 0x3004
/* include GPD, SYSINTE, SYSINTS, GP_CFG0 */
#define SYS_GPIO_DIR 0x3004
/* direction control for GPIO */
#define SYS_SYSINTE 0x3005
/* system interrupt enable */
#define SYS_SYSINTS 0x3006
/* system interrupt status */
#define SYS_GPIO_CFG0 0x3007
/* PAD configuration for GPIO0-GPIO3 */
#define SYS_SYS2 0x3008
/* include GP_CFG1 and 3 reserved bytes */
#define SYS_GPIO_CFG1 0x3008
/* PAD configuration for GPIO4 */
#define SYS_DEMOD_CTL1 0x300B
/* IrDA registers */
#define SYS_IRRC_PSR 0x3020
/* IR protocol selection */
#define SYS_IRRC_PER 0x3024
/* IR protocol extension */
#define SYS_IRRC_SF 0x3028
/* IR sampling frequency */
#define SYS_IRRC_DPIR 0x302C
/* IR data package interval */
#define SYS_IRRC_CR 0x3030
/* IR control */
#define SYS_IRRC_RP 0x3034
/* IR read port */
#define SYS_IRRC_SR 0x3038
/* IR status */
/* I2C master registers */
#define SYS_I2CCR 0x3040
/* I2C clock */
#define SYS_I2CMCR 0x3044
/* I2C master control */
#define SYS_I2CMSTR 0x3048
/* I2C master SCL timing */
#define SYS_I2CMSR 0x304C
/* I2C master status */
#define SYS_I2CMFR 0x3050
/* I2C master FIFO */
/*
* IR registers
*/
#define IR_RX_BUF 0xFC00
#define IR_RX_IE 0xFD00
#define IR_RX_IF 0xFD01
#define IR_RX_CTRL 0xFD02
#define IR_RX_CFG 0xFD03
#define IR_MAX_DURATION0 0xFD04
#define IR_MAX_DURATION1 0xFD05
#define IR_IDLE_LEN0 0xFD06
#define IR_IDLE_LEN1 0xFD07
#define IR_GLITCH_LEN 0xFD08
#define IR_RX_BUF_CTRL 0xFD09
#define IR_RX_BUF_DATA 0xFD0A
#define IR_RX_BC 0xFD0B
#define IR_RX_CLK 0xFD0C
#define IR_RX_C_COUNT_L 0xFD0D
#define IR_RX_C_COUNT_H 0xFD0E
#define IR_SUSPEND_CTRL 0xFD10
#define IR_ERR_TOL_CTRL 0xFD11
#define IR_UNIT_LEN 0xFD12
#define IR_ERR_TOL_LEN 0xFD13
#define IR_MAX_H_TOL_LEN 0xFD14
#define IR_MAX_L_TOL_LEN 0xFD15
#define IR_MASK_CTRL 0xFD16
#define IR_MASK_DATA 0xFD17
#define IR_RES_MASK_ADDR 0xFD18
#define IR_RES_MASK_T_LEN 0xFD19
#endif
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Antti Palosaari | 862 | 96.75% | 21 | 87.50% |
| Olli Salonen | 15 | 1.68% | 1 | 4.17% |
| Rodrigo Tartajo | 12 | 1.35% | 1 | 4.17% |
| Mauro Carvalho Chehab | 2 | 0.22% | 1 | 4.17% |
| Total | 891 | 100.00% | 24 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.