Release 4.11 drivers/mtd/devices/docg3.h
/*
* Handles the M-Systems DiskOnChip G3 chip
*
* Copyright (C) 2011 Robert Jarzmik
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef _MTD_DOCG3_H
#define _MTD_DOCG3_H
#include <linux/mtd/mtd.h>
/*
* Flash memory areas :
* - 0x0000 .. 0x07ff : IPL
* - 0x0800 .. 0x0fff : Data area
* - 0x1000 .. 0x17ff : Registers
* - 0x1800 .. 0x1fff : Unknown
*/
#define DOC_IOSPACE_IPL 0x0000
#define DOC_IOSPACE_DATA 0x0800
#define DOC_IOSPACE_SIZE 0x2000
/*
* DOC G3 layout and adressing scheme
* A page address for the block "b", plane "P" and page "p":
* address = [bbbb bPpp pppp]
*/
#define DOC_ADDR_PAGE_MASK 0x3f
#define DOC_ADDR_BLOCK_SHIFT 6
#define DOC_LAYOUT_NBPLANES 2
#define DOC_LAYOUT_PAGES_PER_BLOCK 64
#define DOC_LAYOUT_PAGE_SIZE 512
#define DOC_LAYOUT_OOB_SIZE 16
#define DOC_LAYOUT_WEAR_SIZE 8
#define DOC_LAYOUT_PAGE_OOB_SIZE \
(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)
#define DOC_LAYOUT_WEAR_OFFSET (DOC_LAYOUT_PAGE_OOB_SIZE * 2)
#define DOC_LAYOUT_BLOCK_SIZE \
(DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
/*
* ECC related constants
*/
#define DOC_ECC_BCH_M 14
#define DOC_ECC_BCH_T 4
#define DOC_ECC_BCH_PRIMPOLY 0x4443
#define DOC_ECC_BCH_SIZE 7
#define DOC_ECC_BCH_COVERED_BYTES \
(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ + \
DOC_LAYOUT_OOB_HAMMING_SZ)
#define DOC_ECC_BCH_TOTAL_BYTES \
(DOC_ECC_BCH_COVERED_BYTES + DOC_LAYOUT_OOB_BCH_SZ)
/*
* Blocks distribution
*/
#define DOC_LAYOUT_BLOCK_BBT 0
#define DOC_LAYOUT_BLOCK_OTP 0
#define DOC_LAYOUT_BLOCK_FIRST_DATA 6
#define DOC_LAYOUT_PAGE_BBT 4
/*
* Extra page OOB (16 bytes wide) layout
*/
#define DOC_LAYOUT_OOB_PAGEINFO_OFS 0
#define DOC_LAYOUT_OOB_HAMMING_OFS 7
#define DOC_LAYOUT_OOB_BCH_OFS 8
#define DOC_LAYOUT_OOB_UNUSED_OFS 15
#define DOC_LAYOUT_OOB_PAGEINFO_SZ 7
#define DOC_LAYOUT_OOB_HAMMING_SZ 1
#define DOC_LAYOUT_OOB_BCH_SZ 7
#define DOC_LAYOUT_OOB_UNUSED_SZ 1
#define DOC_CHIPID_G3 0x200
#define DOC_ERASE_MARK 0xaa
#define DOC_MAX_NBFLOORS 4
/*
* Flash registers
*/
#define DOC_CHIPID 0x1000
#define DOC_TEST 0x1004
#define DOC_BUSLOCK 0x1006
#define DOC_ENDIANCONTROL 0x1008
#define DOC_DEVICESELECT 0x100a
#define DOC_ASICMODE 0x100c
#define DOC_CONFIGURATION 0x100e
#define DOC_INTERRUPTCONTROL 0x1010
#define DOC_READADDRESS 0x101a
#define DOC_DATAEND 0x101e
#define DOC_INTERRUPTSTATUS 0x1020
#define DOC_FLASHSEQUENCE 0x1032
#define DOC_FLASHCOMMAND 0x1034
#define DOC_FLASHADDRESS 0x1036
#define DOC_FLASHCONTROL 0x1038
#define DOC_NOP 0x103e
#define DOC_ECCCONF0 0x1040
#define DOC_ECCCONF1 0x1042
#define DOC_ECCPRESET 0x1044
#define DOC_HAMMINGPARITY 0x1046
#define DOC_BCH_HW_ECC(idx) (0x1048 + idx)
#define DOC_PROTECTION 0x1056
#define DOC_DPS0_KEY 0x105c
#define DOC_DPS1_KEY 0x105e
#define DOC_DPS0_ADDRLOW 0x1060
#define DOC_DPS0_ADDRHIGH 0x1062
#define DOC_DPS1_ADDRLOW 0x1064
#define DOC_DPS1_ADDRHIGH 0x1066
#define DOC_DPS0_STATUS 0x106c
#define DOC_DPS1_STATUS 0x106e
#define DOC_ASICMODECONFIRM 0x1072
#define DOC_CHIPID_INV 0x1074
#define DOC_POWERMODE 0x107c
/*
* Flash sequences
* A sequence is preset before one or more commands are input to the chip.
*/
#define DOC_SEQ_RESET 0x00
#define DOC_SEQ_PAGE_SIZE_532 0x03
#define DOC_SEQ_SET_FASTMODE 0x05
#define DOC_SEQ_SET_RELIABLEMODE 0x09
#define DOC_SEQ_READ 0x12
#define DOC_SEQ_SET_PLANE1 0x0e
#define DOC_SEQ_SET_PLANE2 0x10
#define DOC_SEQ_PAGE_SETUP 0x1d
#define DOC_SEQ_ERASE 0x27
#define DOC_SEQ_PLANES_STATUS 0x31
/*
* Flash commands
*/
#define DOC_CMD_READ_PLANE1 0x00
#define DOC_CMD_SET_ADDR_READ 0x05
#define DOC_CMD_READ_ALL_PLANES 0x30
#define DOC_CMD_READ_PLANE2 0x50
#define DOC_CMD_READ_FLASH 0xe0
#define DOC_CMD_PAGE_SIZE_532 0x3c
#define DOC_CMD_PROG_BLOCK_ADDR 0x60
#define DOC_CMD_PROG_CYCLE1 0x80
#define DOC_CMD_PROG_CYCLE2 0x10
#define DOC_CMD_PROG_CYCLE3 0x11
#define DOC_CMD_ERASECYCLE2 0xd0
#define DOC_CMD_READ_STATUS 0x70
#define DOC_CMD_PLANES_STATUS 0x71
#define DOC_CMD_RELIABLE_MODE 0x22
#define DOC_CMD_FAST_MODE 0xa2
#define DOC_CMD_RESET 0xff
/*
* Flash register : DOC_FLASHCONTROL
*/
#define DOC_CTRL_VIOLATION 0x20
#define DOC_CTRL_CE 0x10
#define DOC_CTRL_UNKNOWN_BITS 0x08
#define DOC_CTRL_PROTECTION_ERROR 0x04
#define DOC_CTRL_SEQUENCE_ERROR 0x02
#define DOC_CTRL_FLASHREADY 0x01
/*
* Flash register : DOC_ASICMODE
*/
#define DOC_ASICMODE_RESET 0x00
#define DOC_ASICMODE_NORMAL 0x01
#define DOC_ASICMODE_POWERDOWN 0x02
#define DOC_ASICMODE_MDWREN 0x04
#define DOC_ASICMODE_BDETCT_RESET 0x08
#define DOC_ASICMODE_RSTIN_RESET 0x10
#define DOC_ASICMODE_RAM_WE 0x20
/*
* Flash register : DOC_ECCCONF0
*/
#define DOC_ECCCONF0_WRITE_MODE 0x0000
#define DOC_ECCCONF0_READ_MODE 0x8000
#define DOC_ECCCONF0_AUTO_ECC_ENABLE 0x4000
#define DOC_ECCCONF0_HAMMING_ENABLE 0x1000
#define DOC_ECCCONF0_BCH_ENABLE 0x0800
#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff
/*
* Flash register : DOC_ECCCONF1
*/
#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
#define DOC_ECCCONF1_UNKOWN1 0x40
#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20
#define DOC_ECCCONF1_UNKOWN3 0x10
#define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f
/*
* Flash register : DOC_PROTECTION
*/
#define DOC_PROTECT_FOUNDRY_OTP_LOCK 0x01
#define DOC_PROTECT_CUSTOMER_OTP_LOCK 0x02
#define DOC_PROTECT_LOCK_INPUT 0x04
#define DOC_PROTECT_STICKY_LOCK 0x08
#define DOC_PROTECT_PROTECTION_ENABLED 0x10
#define DOC_PROTECT_IPL_DOWNLOAD_LOCK 0x20
#define DOC_PROTECT_PROTECTION_ERROR 0x80
/*
* Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS
*/
#define DOC_DPS_OTP_PROTECTED 0x01
#define DOC_DPS_READ_PROTECTED 0x02
#define DOC_DPS_WRITE_PROTECTED 0x04
#define DOC_DPS_HW_LOCK_ENABLED 0x08
#define DOC_DPS_KEY_OK 0x80
/*
* Flash register : DOC_CONFIGURATION
*/
#define DOC_CONF_IF_CFG 0x80
#define DOC_CONF_MAX_ID_MASK 0x30
#define DOC_CONF_VCCQ_3V 0x01
/*
* Flash register : DOC_READADDRESS
*/
#define DOC_READADDR_INC 0x8000
#define DOC_READADDR_ONE_BYTE 0x4000
#define DOC_READADDR_ADDR_MASK 0x1fff
/*
* Flash register : DOC_POWERMODE
*/
#define DOC_POWERDOWN_READY 0x80
/*
* Status of erase and write operation
*/
#define DOC_PLANES_STATUS_FAIL 0x01
#define DOC_PLANES_STATUS_PLANE0_KO 0x02
#define DOC_PLANES_STATUS_PLANE1_KO 0x04
/*
* DPS key management
*
* Each floor of docg3 has 2 protection areas: DPS0 and DPS1. These areas span
* across block boundaries, and define whether these blocks can be read or
* written.
* The definition is dynamically stored in page 0 of blocks (2,3) for DPS0, and
* page 0 of blocks (4,5) for DPS1.
*/
#define DOC_LAYOUT_DPS_KEY_LENGTH 8
/**
* struct docg3_cascade - Cascade of 1 to 4 docg3 chips
* @floors: floors (ie. one physical docg3 chip is one floor)
* @base: IO space to access all chips in the cascade
* @bch: the BCH correcting control structure
* @lock: lock to protect docg3 IO space from concurrent accesses
*/
struct docg3_cascade {
struct mtd_info *floors[DOC_MAX_NBFLOORS];
void __iomem *base;
struct bch_control *bch;
struct mutex lock;
};
/**
* struct docg3 - DiskOnChip driver private data
* @dev: the device currently under control
* @cascade: the cascade this device belongs to
* @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
* @if_cfg: if true, reads are on 16bits, else reads are on 8bits
* @reliable: if 0, docg3 in normal mode, if 1 docg3 in fast mode, if 2 in
* reliable mode
* Fast mode implies more errors than normal mode.
* Reliable mode implies that page 2*n and 2*n+1 are clones.
* @bbt: bad block table cache
* @oob_write_ofs: offset of the MTD where this OOB should belong (ie. in next
* page_write)
* @oob_autoecc: if 1, use only bytes 0-7, 15, and fill the others with HW ECC
* if 0, use all the 16 bytes.
* @oob_write_buf: prepared OOB for next page_write
* @debugfs_root: debugfs root node
*/
struct docg3 {
struct device *dev;
struct docg3_cascade *cascade;
unsigned int device_id:4;
unsigned int if_cfg:1;
unsigned int reliable:2;
int max_block;
u8 *bbt;
loff_t oob_write_ofs;
int oob_autoecc;
u8 oob_write_buf[DOC_LAYOUT_OOB_SIZE];
struct dentry *debugfs_root;
};
#define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg)
#define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg)
#define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg)
#define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg)
#define DEBUGFS_RO_ATTR(name, show_fct) \
static int name##_open(struct inode *inode, struct file *file) \
{ return single_open(file, show_fct, inode->i_private); } \
static const struct file_operations name##_fops = { \
.owner = THIS_MODULE, \
.open = name##_open, \
.llseek = seq_lseek, \
.read = seq_read, \
.release = single_release \
};
#endif
/*
* Trace events part
*/
#undef TRACE_SYSTEM
#define TRACE_SYSTEM docg3
#if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
#define _MTD_DOCG3_TRACE
#include <linux/tracepoint.h>
TRACE_EVENT(docg3_io,
TP_PROTO(int op, int width, u16 reg, int val),
TP_ARGS(op, width, reg, val),
TP_STRUCT__entry(
__field(int, op)
__field(unsigned char, width)
__field(u16, reg)
__field(int, val)),
TP_fast_assign(
__entry->op = op;
__entry->width = width;
__entry->reg = reg;
__entry->val = val;),
TP_printk("docg3: %s%02d reg=%04x, val=%04x",
__entry->op ? "write" : "read", __entry->width,
__entry->reg, __entry->val)
);
#endif
/* This part must be outside protection */
#undef TRACE_INCLUDE_PATH
#undef TRACE_INCLUDE_FILE
#define TRACE_INCLUDE_PATH .
#define TRACE_INCLUDE_FILE docg3
#include <trace/define_trace.h>
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Robert Jarzmik | 801 | 100.00% | 11 | 100.00% |
| Total | 801 | 100.00% | 11 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.