cregit-Linux how code gets into the kernel

Release 4.11 drivers/mtd/maps/sa1100-flash.c

Directory: drivers/mtd/maps
/*
 * Flash memory access on SA11x0 based devices
 *
 * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
 */
#include <linux/module.h>
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/io.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/concat.h>

#include <mach/hardware.h>
#include <asm/sizes.h>
#include <asm/mach/flash.h>


struct sa_subdev_info {
	
char name[16];
	
struct map_info map;
	
struct mtd_info *mtd;
	
struct flash_platform_data *plat;
};


struct sa_info {
	
struct mtd_info		*mtd;
	
int			num_subdev;
	
struct sa_subdev_info	subdev[0];
};

static DEFINE_SPINLOCK(sa1100_vpp_lock);

static int sa1100_vpp_refcnt;

static void sa1100_set_vpp(struct map_info *map, int on) { struct sa_subdev_info *subdev = container_of(map, struct sa_subdev_info, map); unsigned long flags; spin_lock_irqsave(&sa1100_vpp_lock, flags); if (on) { if (++sa1100_vpp_refcnt == 1) /* first nested 'on' */ subdev->plat->set_vpp(1); } else { if (--sa1100_vpp_refcnt == 0) /* last nested 'off' */ subdev->plat->set_vpp(0); } spin_unlock_irqrestore(&sa1100_vpp_lock, flags); }

Contributors

PersonTokensPropCommitsCommitProp
Paul Parsons5559.78%133.33%
Russell King3740.22%266.67%
Total92100.00%3100.00%


static void sa1100_destroy_subdev(struct sa_subdev_info *subdev) { if (subdev->mtd) map_destroy(subdev->mtd); if (subdev->map.virt) iounmap(subdev->map.virt); release_mem_region(subdev->map.phys, subdev->map.size); }

Contributors

PersonTokensPropCommitsCommitProp
Russell King5089.29%266.67%
David Woodhouse610.71%133.33%
Total56100.00%3100.00%


static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *res) { unsigned long phys; unsigned int size; int ret; phys = res->start; size = res->end - phys + 1; /* * Retrieve the bankwidth from the MSC registers. * We currently only implement CS0 and CS1 here. */ switch (phys) { default: printk(KERN_WARNING "SA1100 flash: unknown base address " "0x%08lx, assuming CS0\n", phys); case SA1100_CS0_PHYS: subdev->map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4; break; case SA1100_CS1_PHYS: subdev->map.bankwidth = ((MSC0 >> 16) & MSC_RBW) ? 2 : 4; break; } if (!request_mem_region(phys, size, subdev->name)) { ret = -EBUSY; goto out; } if (subdev->plat->set_vpp) subdev->map.set_vpp = sa1100_set_vpp; subdev->map.phys = phys; subdev->map.size = size; subdev->map.virt = ioremap(phys, size); if (!subdev->map.virt) { ret = -ENOMEM; goto err; } simple_map_init(&subdev->map); /* * Now let's probe for the actual flash. Do it here since * specific machine settings might have been set above. */ subdev->mtd = do_map_probe(subdev->plat->map_name, &subdev->map); if (subdev->mtd == NULL) { ret = -ENXIO; goto err; } printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %uMiB, %d-bit\n", phys, (unsigned)(subdev->mtd->size >> 20), subdev->map.bankwidth * 8); return 0; err: sa1100_destroy_subdev(subdev); out: return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Russell King22379.36%770.00%
David Woodhouse5720.28%220.00%
Linus Torvalds10.36%110.00%
Total281100.00%10100.00%


static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *plat) { int i; if (info->mtd) { mtd_device_unregister(info->mtd); if (info->mtd != info->subdev[0].mtd) mtd_concat_destroy(info->mtd); } for (i = info->num_subdev - 1; i >= 0; i--) sa1100_destroy_subdev(&info->subdev[i]); kfree(info); if (plat->exit) plat->exit(); }

Contributors

PersonTokensPropCommitsCommitProp
Russell King9999.00%480.00%
Jamie Iles11.00%120.00%
Total100100.00%5100.00%


static struct sa_info *sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) { struct sa_info *info; int nr, size, i, ret = 0; /* * Count number of devices. */ for (nr = 0; ; nr++) if (!platform_get_resource(pdev, IORESOURCE_MEM, nr)) break; if (nr == 0) { ret = -ENODEV; goto out; } size = sizeof(struct sa_info) + sizeof(struct sa_subdev_info) * nr; /* * Allocate the map_info structs in one go. */ info = kzalloc(size, GFP_KERNEL); if (!info) { ret = -ENOMEM; goto out; } if (plat->init) { ret = plat->init(); if (ret) goto err; } /* * Claim and then map the memory regions. */ for (i = 0; i < nr; i++) { struct sa_subdev_info *subdev = &info->subdev[i]; struct resource *res; res = platform_get_resource(pdev, IORESOURCE_MEM, i); if (!res) break; subdev->map.name = subdev->name; sprintf(subdev->name, "%s-%d", plat->name, i); subdev->plat = plat; ret = sa1100_probe_subdev(subdev, res); if (ret) break; } info->num_subdev = i; /* * ENXIO is special. It means we didn't find a chip when we probed. */ if (ret != 0 && !(ret == -ENXIO && info->num_subdev > 0)) goto err; /* * If we found one device, don't bother with concat support. If * we found multiple devices, use concat if we have it available, * otherwise fail. Either way, it'll be called "sa1100". */ if (info->num_subdev == 1) { strcpy(info->subdev[0].name, plat->name); info->mtd = info->subdev[0].mtd; ret = 0; } else if (info->num_subdev > 1) { struct mtd_info *cdev[nr]; /* * We detected multiple devices. Concatenate them together. */ for (i = 0; i < info->num_subdev; i++) cdev[i] = info->subdev[i].mtd; info->mtd = mtd_concat_create(cdev, info->num_subdev, plat->name); if (info->mtd == NULL) { ret = -ENXIO; goto err; } } info->mtd->dev.parent = &pdev->dev; if (ret == 0) return info; err: sa1100_destroy(info, plat); out: return ERR_PTR(ret); }

Contributors

PersonTokensPropCommitsCommitProp
Russell King32976.51%964.29%
David Woodhouse8219.07%214.29%
Frans Klaver133.02%17.14%
Dan Carpenter51.16%17.14%
Burman Yan10.23%17.14%
Total430100.00%14100.00%

static const char * const part_probes[] = { "cmdlinepart", "RedBoot", NULL };
static int sa1100_mtd_probe(struct platform_device *pdev) { struct flash_platform_data *plat = dev_get_platdata(&pdev->dev); struct sa_info *info; int err; if (!plat) return -ENODEV; info = sa1100_setup_mtd(pdev, plat); if (IS_ERR(info)) { err = PTR_ERR(info); goto out; } /* * Partition selection stuff. */ mtd_device_parse_register(info->mtd, part_probes, NULL, plat->parts, plat->nr_parts); platform_set_drvdata(pdev, info); err = 0; out: return err; }

Contributors

PersonTokensPropCommitsCommitProp
Russell King7470.48%753.85%
David Woodhouse1413.33%215.38%
Linus Torvalds98.57%17.69%
Jingoo Han43.81%17.69%
Dmitry Baryshkov32.86%17.69%
Artem B. Bityutskiy10.95%17.69%
Total105100.00%13100.00%


static int sa1100_mtd_remove(struct platform_device *pdev) { struct sa_info *info = platform_get_drvdata(pdev); struct flash_platform_data *plat = dev_get_platdata(&pdev->dev); sa1100_destroy(info, plat); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Russell King3681.82%675.00%
David Woodhouse49.09%112.50%
Jingoo Han49.09%112.50%
Total44100.00%8100.00%

static struct platform_driver sa1100_mtd_driver = { .probe = sa1100_mtd_probe, .remove = sa1100_mtd_remove, .driver = { .name = "sa1100-mtd", }, }; module_platform_driver(sa1100_mtd_driver); MODULE_AUTHOR("Nicolas Pitre"); MODULE_DESCRIPTION("SA1100 CFI map driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:sa1100-mtd");

Overall Contributors

PersonTokensPropCommitsCommitProp
Russell King93773.03%1952.78%
David Woodhouse19214.96%25.56%
Paul Parsons655.07%12.78%
Linus Torvalds473.66%25.56%
Frans Klaver131.01%12.78%
Jingoo Han80.62%12.78%
Dan Carpenter50.39%12.78%
Kay Sievers40.31%12.78%
Dmitry Baryshkov30.23%12.78%
Artem B. Bityutskiy20.16%25.56%
Uwe Kleine-König20.16%12.78%
Axel Lin20.16%12.78%
Nico Pitre10.08%12.78%
Burman Yan10.08%12.78%
Jamie Iles10.08%12.78%
Bill Pemberton0.00%00.00%
Total1283100.00%36100.00%
Directory: drivers/mtd/maps
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.