cregit-Linux how code gets into the kernel

Release 4.11 drivers/mtd/maps/scx200_docflash.c

Directory: drivers/mtd/maps
/* linux/drivers/mtd/maps/scx200_docflash.c

   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>

   National Semiconductor SCx200 flash mapped with DOCCS
*/

#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>

#include <linux/pci.h>
#include <linux/scx200.h>


#define NAME "scx200_docflash"

MODULE_AUTHOR("Christer Weinigel <wingel@hack.org>");
MODULE_DESCRIPTION("NatSemi SCx200 DOCCS Flash Driver");
MODULE_LICENSE("GPL");


static int probe = 0;		
/* Don't autoprobe */

static unsigned size = 0x1000000; 
/* 16 MiB the whole ISA address space */

static unsigned width = 8;	
/* Default to 8 bits wide */

static char *flashtype = "cfi_probe";

module_param(probe, int, 0);
MODULE_PARM_DESC(probe, "Probe for a BIOS mapping");
module_param(size, int, 0);
MODULE_PARM_DESC(size, "Size of the flash mapping");
module_param(width, int, 0);
MODULE_PARM_DESC(width, "Data width of the flash mapping (8/16)");
module_param(flashtype, charp, 0);
MODULE_PARM_DESC(flashtype, "Type of MTD probe to do");


static struct resource docmem = {
	.flags = IORESOURCE_MEM,
	.name  = "NatSemi SCx200 DOCCS Flash",
};


static struct mtd_info *mymtd;


static struct mtd_partition partition_info[] = {
	{
		.name   = "DOCCS Boot kernel",
		.offset = 0,
		.size   = 0xc0000
	},
	{
		.name   = "DOCCS Low BIOS",
		.offset = 0xc0000,
		.size   = 0x40000
	},
	{
		.name   = "DOCCS File system",
		.offset = 0x100000,
		.size   = ~0	/* calculate from flash size */
	},
	{
		.name   = "DOCCS High BIOS",
		.offset = ~0, 	/* calculate from flash size */
		.size   = 0x80000
	},
};

#define NUM_PARTITIONS ARRAY_SIZE(partition_info)


static struct map_info scx200_docflash_map = {
	.name      = "NatSemi SCx200 DOCCS Flash",
};


static int __init init_scx200_docflash(void) { unsigned u; unsigned base; unsigned ctrl; unsigned pmr; struct pci_dev *bridge; printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n"); if ((bridge = pci_get_device(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE, NULL)) == NULL) return -ENODEV; /* check that we have found the configuration block */ if (!scx200_cb_present()) { pci_dev_put(bridge); return -ENODEV; } if (probe) { /* Try to use the present flash mapping if any */ pci_read_config_dword(bridge, SCx200_DOCCS_BASE, &base); pci_read_config_dword(bridge, SCx200_DOCCS_CTRL, &ctrl); pci_dev_put(bridge); pmr = inl(scx200_cb_base + SCx200_PMR); if (base == 0 || (ctrl & 0x07000000) != 0x07000000 || (ctrl & 0x0007ffff) == 0) return -ENODEV; size = ((ctrl&0x1fff)<<13) + (1<<13); for (u = size; u > 1; u >>= 1) ; if (u != 1) return -ENODEV; if (pmr & (1<<6)) width = 16; else width = 8; docmem.start = base; docmem.end = base + size; if (request_resource(&iomem_resource, &docmem)) { printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n"); return -ENOMEM; } } else { pci_dev_put(bridge); for (u = size; u > 1; u >>= 1) ; if (u != 1) { printk(KERN_ERR NAME ": invalid size for flash mapping\n"); return -EINVAL; } if (width != 8 && width != 16) { printk(KERN_ERR NAME ": invalid bus width for flash mapping\n"); return -EINVAL; } if (allocate_resource(&iomem_resource, &docmem, size, 0xc0000000, 0xffffffff, size, NULL, NULL)) { printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n"); return -ENOMEM; } ctrl = 0x07000000 | ((size-1) >> 13); printk(KERN_INFO "DOCCS BASE=0x%08lx, CTRL=0x%08lx\n", (long)docmem.start, (long)ctrl); pci_write_config_dword(bridge, SCx200_DOCCS_BASE, docmem.start); pci_write_config_dword(bridge, SCx200_DOCCS_CTRL, ctrl); pmr = inl(scx200_cb_base + SCx200_PMR); if (width == 8) { pmr &= ~(1<<6); } else { pmr |= (1<<6); } outl(pmr, scx200_cb_base + SCx200_PMR); } printk(KERN_INFO NAME ": DOCCS mapped at %pR, width %d\n", &docmem, width); scx200_docflash_map.size = size; if (width == 8) scx200_docflash_map.bankwidth = 1; else scx200_docflash_map.bankwidth = 2; simple_map_init(&scx200_docflash_map); scx200_docflash_map.phys = docmem.start; scx200_docflash_map.virt = ioremap(docmem.start, scx200_docflash_map.size); if (!scx200_docflash_map.virt) { printk(KERN_ERR NAME ": failed to ioremap the flash\n"); release_resource(&docmem); return -EIO; } mymtd = do_map_probe(flashtype, &scx200_docflash_map); if (!mymtd) { printk(KERN_ERR NAME ": unable to detect flash\n"); iounmap(scx200_docflash_map.virt); release_resource(&docmem); return -ENXIO; } if (size < mymtd->size) printk(KERN_WARNING NAME ": warning, flash mapping is smaller than flash size\n"); mymtd->owner = THIS_MODULE; partition_info[3].offset = mymtd->size-partition_info[3].size; partition_info[2].size = partition_info[3].offset-partition_info[2].offset; mtd_device_register(mymtd, partition_info, NUM_PARTITIONS); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Christer Weinigel58592.42%112.50%
David Woodhouse213.32%337.50%
Alan Cox182.84%112.50%
Henrik Brix Andersen60.95%112.50%
Joe Perches20.32%112.50%
Jamie Iles10.16%112.50%
Total633100.00%8100.00%


static void __exit cleanup_scx200_docflash(void) { if (mymtd) { mtd_device_unregister(mymtd); map_destroy(mymtd); } if (scx200_docflash_map.virt) { iounmap(scx200_docflash_map.virt); release_resource(&docmem); } }

Contributors

PersonTokensPropCommitsCommitProp
Christer Weinigel4393.48%133.33%
David Woodhouse24.35%133.33%
Jamie Iles12.17%133.33%
Total46100.00%3100.00%

module_init(init_scx200_docflash); module_exit(cleanup_scx200_docflash); /* Local variables: compile-command: "make -k -C ../../.. SUBDIRS=drivers/mtd/maps modules" c-basic-offset: 8 End: */

Overall Contributors

PersonTokensPropCommitsCommitProp
Christer Weinigel85089.38%19.09%
Andrew Morton444.63%19.09%
David Woodhouse272.84%327.27%
Alan Cox181.89%19.09%
Henrik Brix Andersen60.63%19.09%
Jamie Iles20.21%19.09%
Joe Perches20.21%19.09%
Adrian Bunk10.11%19.09%
Tobias Klauser10.11%19.09%
Total951100.00%11100.00%
Directory: drivers/mtd/maps
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.