cregit-Linux how code gets into the kernel

Release 4.11 drivers/mtd/nand/fsmc_nand.c

Directory: drivers/mtd/nand
/*
 * drivers/mtd/nand/fsmc_nand.c
 *
 * ST Microelectronics
 * Flexible Static Memory Controller (FSMC)
 * Driver for NAND portions
 *
 * Copyright © 2010 ST Microelectronics
 * Vipin Kumar <vipin.kumar@st.com>
 * Ashish Priyadarshi
 *
 * Based on drivers/mtd/nand/nomadik_nand.c
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2. This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/dmaengine.h>
#include <linux/dma-direction.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/resource.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/amba/bus.h>
#include <mtd/mtd-abi.h>


#define FSMC_NAND_BW8		1

#define FSMC_NAND_BW16		2


#define FSMC_MAX_NOR_BANKS	4

#define FSMC_MAX_NAND_BANKS	4


#define FSMC_FLASH_WIDTH8	1

#define FSMC_FLASH_WIDTH16	2

/* fsmc controller registers for NOR flash */

#define CTRL			0x0
	/* ctrl register definitions */
	
#define BANK_ENABLE		(1 << 0)
	
#define MUXED			(1 << 1)
	
#define NOR_DEV			(2 << 2)
	
#define WIDTH_8			(0 << 4)
	
#define WIDTH_16		(1 << 4)
	
#define RSTPWRDWN		(1 << 6)
	
#define WPROT			(1 << 7)
	
#define WRT_ENABLE		(1 << 12)
	
#define WAIT_ENB		(1 << 13)


#define CTRL_TIM		0x4
	/* ctrl_tim register definitions */


#define FSMC_NOR_BANK_SZ	0x8

#define FSMC_NOR_REG_SIZE	0x40


#define FSMC_NOR_REG(base, bank, reg)		(base + \
                                                FSMC_NOR_BANK_SZ * (bank) + \
                                                reg)

/* fsmc controller registers for NAND flash */

#define PC			0x00
	/* pc register definitions */
	
#define FSMC_RESET		(1 << 0)
	
#define FSMC_WAITON		(1 << 1)
	
#define FSMC_ENABLE		(1 << 2)
	
#define FSMC_DEVTYPE_NAND	(1 << 3)
	
#define FSMC_DEVWID_8		(0 << 4)
	
#define FSMC_DEVWID_16		(1 << 4)
	
#define FSMC_ECCEN		(1 << 6)
	
#define FSMC_ECCPLEN_512	(0 << 7)
	
#define FSMC_ECCPLEN_256	(1 << 7)
	
#define FSMC_TCLR_1		(1)
	
#define FSMC_TCLR_SHIFT		(9)
	
#define FSMC_TCLR_MASK		(0xF)
	
#define FSMC_TAR_1		(1)
	
#define FSMC_TAR_SHIFT		(13)
	
#define FSMC_TAR_MASK		(0xF)

#define STS			0x04
	/* sts register definitions */
	
#define FSMC_CODE_RDY		(1 << 15)

#define COMM			0x08
	/* comm register definitions */
	
#define FSMC_TSET_0		0
	
#define FSMC_TSET_SHIFT		0
	
#define FSMC_TSET_MASK		0xFF
	
#define FSMC_TWAIT_6		6
	
#define FSMC_TWAIT_SHIFT	8
	
#define FSMC_TWAIT_MASK		0xFF
	
#define FSMC_THOLD_4		4
	
#define FSMC_THOLD_SHIFT	16
	
#define FSMC_THOLD_MASK		0xFF
	
#define FSMC_THIZ_1		1
	
#define FSMC_THIZ_SHIFT		24
	
#define FSMC_THIZ_MASK		0xFF

#define ATTRIB			0x0C

#define IOATA			0x10

#define ECC1			0x14

#define ECC2			0x18

#define ECC3			0x1C

#define FSMC_NAND_BANK_SZ	0x20


#define FSMC_NAND_REG(base, bank, reg)		(base + FSMC_NOR_REG_SIZE + \
                                                (FSMC_NAND_BANK_SZ * (bank)) + \
                                                reg)


#define FSMC_BUSY_WAIT_TIMEOUT	(1 * HZ)


struct fsmc_nand_timings {
	
uint8_t tclr;
	
uint8_t tar;
	
uint8_t thiz;
	
uint8_t thold;
	
uint8_t twait;
	
uint8_t tset;
};


enum access_mode {
	
USE_DMA_ACCESS = 1,
	
USE_WORD_ACCESS,
};

/**
 * fsmc_nand_platform_data - platform specific NAND controller config
 * @nand_timings: timing setup for the physical NAND interface
 * @partitions: partition table for the platform, use a default fallback
 * if this is NULL
 * @nr_partitions: the number of partitions in the previous entry
 * @options: different options for the driver
 * @width: bus width
 * @bank: default bank
 * @select_bank: callback to select a certain bank, this is
 * platform-specific. If the controller only supports one bank
 * this may be set to NULL
 */

struct fsmc_nand_platform_data {
	
struct fsmc_nand_timings *nand_timings;
	
struct mtd_partition	*partitions;
	
unsigned int		nr_partitions;
	
unsigned int		options;
	
unsigned int		width;
	
unsigned int		bank;

	
enum access_mode	mode;

	
void			(*select_bank)(uint32_t bank, uint32_t busw);

	/* priv structures for dma accesses */
	
void			*read_dma_priv;
	
void			*write_dma_priv;
};


static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) { struct nand_chip *chip = mtd_to_nand(mtd); if (section >= chip->ecc.steps) return -ERANGE; oobregion->offset = (section * 16) + 2; oobregion->length = 3; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Boris Brezillon5789.06%150.00%
Bhavna Yadav710.94%150.00%
Total64100.00%2100.00%


static int fsmc_ecc1_ooblayout_free(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) { struct nand_chip *chip = mtd_to_nand(mtd); if (section >= chip->ecc.steps) return -ERANGE; oobregion->offset = (section * 16) + 8; if (section < chip->ecc.steps - 1) oobregion->length = 8; else oobregion->length = mtd->oobsize - oobregion->offset; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Boris Brezillon8089.89%150.00%
Bhavna Yadav910.11%150.00%
Total89100.00%2100.00%

static const struct mtd_ooblayout_ops fsmc_ecc1_ooblayout_ops = { .ecc = fsmc_ecc1_ooblayout_ecc, .free = fsmc_ecc1_ooblayout_free, }; /* * ECC placement definitions in oobfree type format. * There are 13 bytes of ecc for every 512 byte block and it has to be read * consecutively and immediately after the 512 byte data block for hardware to * generate the error bit offsets in 512 byte data. */
static int fsmc_ecc4_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) { struct nand_chip *chip = mtd_to_nand(mtd); if (section >= chip->ecc.steps) return -ERANGE; oobregion->length = chip->ecc.bytes; if (!section && mtd->writesize <= 512) oobregion->offset = 0; else oobregion->offset = (section * 16) + 2; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Boris Brezillon7789.53%150.00%
Linus Walleij910.47%150.00%
Total86100.00%2100.00%


static int fsmc_ecc4_ooblayout_free(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) { struct nand_chip *chip = mtd_to_nand(mtd); if (section >= chip->ecc.steps) return -ERANGE; oobregion->offset = (section * 16) + 15; if (section < chip->ecc.steps - 1) oobregion->length = 3; else oobregion->length = mtd->oobsize - oobregion->offset; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Boris Brezillon7988.76%150.00%
Linus Walleij1011.24%150.00%
Total89100.00%2100.00%

static const struct mtd_ooblayout_ops fsmc_ecc4_ooblayout_ops = { .ecc = fsmc_ecc4_ooblayout_ecc, .free = fsmc_ecc4_ooblayout_free, }; /** * struct fsmc_nand_data - structure for FSMC NAND device state * * @pid: Part ID on the AMBA PrimeCell format * @mtd: MTD info for a NAND flash. * @nand: Chip related info for a NAND flash. * @partitions: Partition info for a NAND Flash. * @nr_partitions: Total number of partition of a NAND flash. * * @bank: Bank number for probed device. * @clk: Clock structure for FSMC. * * @read_dma_chan: DMA channel for read access * @write_dma_chan: DMA channel for write access to NAND * @dma_access_complete: Completion structure * * @data_pa: NAND Physical port for Data. * @data_va: NAND port for Data. * @cmd_va: NAND port for Command. * @addr_va: NAND port for Address. * @regs_va: FSMC regs base address. */ struct fsmc_nand_data { u32 pid; struct nand_chip nand; struct mtd_partition *partitions; unsigned int nr_partitions; unsigned int bank; struct device *dev; enum access_mode mode; struct clk *clk; /* DMA related objects */ struct dma_chan *read_dma_chan; struct dma_chan *write_dma_chan; struct completion dma_access_complete; struct fsmc_nand_timings *dev_timings; dma_addr_t data_pa; void __iomem *data_va; void __iomem *cmd_va; void __iomem *addr_va; void __iomem *regs_va; void (*select_chip)(uint32_t bank, uint32_t busw); };
static inline struct fsmc_nand_data *mtd_to_fsmc(struct mtd_info *mtd) { return container_of(mtd_to_nand(mtd), struct fsmc_nand_data, nand); }

Contributors

PersonTokensPropCommitsCommitProp
Boris Brezillon28100.00%2100.00%
Total28100.00%2100.00%

/* Assert CS signal based on chipnr */
static void fsmc_select_chip(struct mtd_info *mtd, int chipnr) { struct nand_chip *chip = mtd_to_nand(mtd); struct fsmc_nand_data *host; host = mtd_to_fsmc(mtd); switch (chipnr) { case -1: chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE); break; case 0: case 1: case 2: case 3: if (host->select_chip) host->select_chip(chipnr, chip->options & NAND_BUSWIDTH_16); break; default: dev_err(host->dev, "unsupported chip-select %d\n", chipnr); } }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij9086.54%125.00%
Stefan Roese109.62%125.00%
Boris Brezillon43.85%250.00%
Total104100.00%4100.00%

/* * fsmc_cmd_ctrl - For facilitaing Hardware access * This routine allows hardware specific access to control-lines(ALE,CLE) */
static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { struct nand_chip *this = mtd_to_nand(mtd); struct fsmc_nand_data *host = mtd_to_fsmc(mtd); void __iomem *regs = host->regs_va; unsigned int bank = host->bank; if (ctrl & NAND_CTRL_CHANGE) { u32 pc; if (ctrl & NAND_CLE) { this->IO_ADDR_R = host->cmd_va; this->IO_ADDR_W = host->cmd_va; } else if (ctrl & NAND_ALE) { this->IO_ADDR_R = host->addr_va; this->IO_ADDR_W = host->addr_va; } else { this->IO_ADDR_R = host->data_va; this->IO_ADDR_W = host->data_va; } pc = readl(FSMC_NAND_REG(regs, bank, PC)); if (ctrl & NAND_NCE) pc |= FSMC_ENABLE; else pc &= ~FSMC_ENABLE; writel_relaxed(pc, FSMC_NAND_REG(regs, bank, PC)); } mb(); if (cmd != NAND_CMD_NONE) writeb_relaxed(cmd, this->IO_ADDR_W); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij16081.63%120.00%
Vipin Kumar3216.33%240.00%
Boris Brezillon42.04%240.00%
Total196100.00%5100.00%

/* * fsmc_nand_setup - FSMC (Flexible Static Memory Controller) init routine * * This routine initializes timing parameters related to NAND memory access in * FSMC registers */
static void fsmc_nand_setup(void __iomem *regs, uint32_t bank, uint32_t busw, struct fsmc_nand_timings *timings) { uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON; uint32_t tclr, tar, thiz, thold, twait, tset; struct fsmc_nand_timings *tims; struct fsmc_nand_timings default_timings = { .tclr = FSMC_TCLR_1, .tar = FSMC_TAR_1, .thiz = FSMC_THIZ_1, .thold = FSMC_THOLD_4, .twait = FSMC_TWAIT_6, .tset = FSMC_TSET_0, }; if (timings) tims = timings; else tims = &default_timings; tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT; tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT; thiz = (tims->thiz & FSMC_THIZ_MASK) << FSMC_THIZ_SHIFT; thold = (tims->thold & FSMC_THOLD_MASK) << FSMC_THOLD_SHIFT; twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT; tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT; if (busw) writel_relaxed(value | FSMC_DEVWID_16, FSMC_NAND_REG(regs, bank, PC)); else writel_relaxed(value | FSMC_DEVWID_8, FSMC_NAND_REG(regs, bank, PC)); writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | tclr | tar, FSMC_NAND_REG(regs, bank, PC)); writel_relaxed(thiz | thold | twait | tset, FSMC_NAND_REG(regs, bank, COMM)); writel_relaxed(thiz | thold | twait | tset, FSMC_NAND_REG(regs, bank, ATTRIB)); }

Contributors

PersonTokensPropCommitsCommitProp
Vipin Kumar19871.74%375.00%
Linus Walleij7828.26%125.00%
Total276100.00%4100.00%

/* * fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers */
static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode) { struct fsmc_nand_data *host = mtd_to_fsmc(mtd); void __iomem *regs = host->regs_va; uint32_t bank = host->bank; writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCPLEN_256, FSMC_NAND_REG(regs, bank, PC)); writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCEN, FSMC_NAND_REG(regs, bank, PC)); writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | FSMC_ECCEN, FSMC_NAND_REG(regs, bank, PC)); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij7865.00%125.00%
Vipin Kumar4134.17%250.00%
Boris Brezillon10.83%125.00%
Total120100.00%4100.00%

/* * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to * max of 8-bits) */
static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data, uint8_t *ecc) { struct fsmc_nand_data *host = mtd_to_fsmc(mtd); void __iomem *regs = host->regs_va; uint32_t bank = host->bank; uint32_t ecc_tmp; unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT; do { if (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) & FSMC_CODE_RDY) break; else cond_resched(); } while (!time_after_eq(jiffies, deadline)); if (time_after_eq(jiffies, deadline)) { dev_err(host->dev, "calculate ecc timed out\n"); return -ETIMEDOUT; } ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1)); ecc[0] = (uint8_t) (ecc_tmp >> 0); ecc[1] = (uint8_t) (ecc_tmp >> 8); ecc[2] = (uint8_t) (ecc_tmp >> 16); ecc[3] = (uint8_t) (ecc_tmp >> 24); ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2)); ecc[4] = (uint8_t) (ecc_tmp >> 0); ecc[5] = (uint8_t) (ecc_tmp >> 8); ecc[6] = (uint8_t) (ecc_tmp >> 16); ecc[7] = (uint8_t) (ecc_tmp >> 24); ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3)); ecc[8] = (uint8_t) (ecc_tmp >> 0); ecc[9] = (uint8_t) (ecc_tmp >> 8); ecc[10] = (uint8_t) (ecc_tmp >> 16); ecc[11] = (uint8_t) (ecc_tmp >> 24); ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, STS)); ecc[12] = (uint8_t) (ecc_tmp >> 16); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij29582.63%120.00%
Vipin Kumar6117.09%360.00%
Boris Brezillon10.28%120.00%
Total357100.00%5100.00%

/* * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to * max of 1-bit) */
static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, uint8_t *ecc) { struct fsmc_nand_data *host = mtd_to_fsmc(mtd); void __iomem *regs = host->regs_va; uint32_t bank = host->bank; uint32_t ecc_tmp; ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1)); ecc[0] = (uint8_t) (ecc_tmp >> 0); ecc[1] = (uint8_t) (ecc_tmp >> 8); ecc[2] = (uint8_t) (ecc_tmp >> 16); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij9890.74%125.00%
Vipin Kumar98.33%250.00%
Boris Brezillon10.93%125.00%
Total108100.00%4100.00%

/* Count the number of 0's in buff upto a max of max_bits */
static int count_written_bits(uint8_t *buff, int size, int max_bits) { int k, written_bits = 0; for (k = 0; k < size; k++) { written_bits += hweight8(~buff[k]); if (written_bits > max_bits) break; } return written_bits; }

Contributors

PersonTokensPropCommitsCommitProp
Vipin Kumar59100.00%1100.00%
Total59100.00%1100.00%


static void dma_complete(void *param) { struct fsmc_nand_data *host = param; complete(&host->dma_access_complete); }

Contributors

PersonTokensPropCommitsCommitProp
Vipin Kumar25100.00%2100.00%
Total25100.00%2100.00%


static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len, enum dma_data_direction direction) { struct dma_chan *chan; struct dma_device *dma_dev; struct dma_async_tx_descriptor *tx; dma_addr_t dma_dst, dma_src, dma_addr; dma_cookie_t cookie; unsigned long flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; int ret; unsigned long time_left; if (direction == DMA_TO_DEVICE) chan = host->write_dma_chan; else if (direction == DMA_FROM_DEVICE) chan = host->read_dma_chan; else return -EINVAL; dma_dev = chan->device; dma_addr = dma_map_single(dma_dev->dev, buffer, len, direction); if (direction == DMA_TO_DEVICE) { dma_src = dma_addr; dma_dst = host->data_pa; } else { dma_src = host->data_pa; dma_dst = dma_addr; } tx = dma_dev->device_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags); if (!tx) { dev_err(host->dev, "device_prep_dma_memcpy error\n"); ret = -EIO; goto unmap_dma; } tx->callback = dma_complete; tx->callback_param = host; cookie = tx->tx_submit(tx); ret = dma_submit_error(cookie); if (ret) { dev_err(host->dev, "dma_submit_error %d\n", cookie); goto unmap_dma; } dma_async_issue_pending(chan); time_left = wait_for_completion_timeout(&host->dma_access_complete, msecs_to_jiffies(3000)); if (time_left == 0) { dmaengine_terminate_all(chan); dev_err(host->dev, "wait_for_completion_timeout\n"); ret = -ETIMEDOUT; goto unmap_dma; } ret = 0; unmap_dma: dma_unmap_single(dma_dev->dev, dma_addr, len, direction); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Vipin Kumar26386.23%342.86%
Bartlomiej Zolnierkiewicz3411.15%114.29%
Nicholas Mc Guire72.30%228.57%
Vinod Koul10.33%114.29%
Total305100.00%7100.00%

/* * fsmc_write_buf - write buffer to chip * @mtd: MTD device structure * @buf: data buffer * @len: number of bytes to write */
static void fsmc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { int i; struct nand_chip *chip = mtd_to_nand(mtd); if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) && IS_ALIGNED(len, sizeof(uint32_t))) { uint32_t *p = (uint32_t *)buf; len = len >> 2; for (i = 0; i < len; i++) writel_relaxed(p[i], chip->IO_ADDR_W); } else { for (i = 0; i < len; i++) writeb_relaxed(buf[i], chip->IO_ADDR_W); } }

Contributors

PersonTokensPropCommitsCommitProp
Vipin Kumar12597.66%375.00%
Boris Brezillon32.34%125.00%
Total128100.00%4100.00%

/* * fsmc_read_buf - read chip data into buffer * @mtd: MTD device structure * @buf: buffer to store date * @len: number of bytes to read */
static void fsmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { int i; struct nand_chip *chip = mtd_to_nand(mtd); if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) && IS_ALIGNED(len, sizeof(uint32_t))) { uint32_t *p = (uint32_t *)buf; len = len >> 2; for (i = 0; i < len; i++) p[i] = readl_relaxed(chip->IO_ADDR_R); } else { for (i = 0; i < len; i++) buf[i] = readb_relaxed(chip->IO_ADDR_R); } }

Contributors

PersonTokensPropCommitsCommitProp
Vipin Kumar12497.64%375.00%
Boris Brezillon32.36%125.00%
Total127100.00%4100.00%

/* * fsmc_read_buf_dma - read chip data into buffer * @mtd: MTD device structure * @buf: buffer to store date * @len: number of bytes to read */
static void fsmc_read_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len) { struct fsmc_nand_data *host = mtd_to_fsmc(mtd); dma_xfer(host, buf, len, DMA_FROM_DEVICE); }

Contributors

PersonTokensPropCommitsCommitProp
Vipin Kumar3692.31%150.00%
Boris Brezillon37.69%150.00%
Total39100.00%2100.00%

/* * fsmc_write_buf_dma - write buffer to chip * @mtd: MTD device structure * @buf: data buffer * @len: number of bytes to write */
static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf, int len) { struct fsmc_nand_data *host = mtd_to_fsmc(mtd); dma_xfer(host, (void *)buf, len, DMA_TO_DEVICE); }

Contributors

PersonTokensPropCommitsCommitProp
Vipin Kumar4193.18%266.67%
Boris Brezillon36.82%133.33%
Total44100.00%3100.00%

/* * fsmc_read_page_hwecc * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data * @oob_required: caller expects OOB data read to chip->oob_poi * @page: page number to read * * This routine is needed for fsmc version 8 as reading from NAND chip has to be * performed in a strict sequence as follows: * data(512 byte) -> ecc(13 byte) * After this read, fsmc hardware generates and reports error data bits(up to a * max of 8 bits) */
static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { int i, j, s, stat, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; uint8_t *p = buf; uint8_t *ecc_calc = chip->buffers->ecccalc; uint8_t *ecc_code = chip->buffers->ecccode; int off, len, group = 0; /* * ecc_oob is intentionally taken as uint16_t. In 16bit devices, we * end up reading 14 bytes (7 words) from oob. The local array is * to maintain word alignment */ uint16_t ecc_oob[7]; uint8_t *oob = (uint8_t *)&ecc_oob[0]; unsigned int max_bitflips = 0; for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) { chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page); chip->ecc.hwctl(mtd, NAND_ECC_READ); chip->read_buf(mtd, p, eccsize); for (j = 0; j < eccbytes;) { struct mtd_oob_region oobregion; int ret; ret = mtd_ooblayout_ecc(mtd, group++, &oobregion); if (ret) return ret; off = oobregion.offset; len = oobregion.length; /* * length is intentionally kept a higher multiple of 2 * to read at least 13 bytes even in case of 16 bit NAND * devices */ if (chip->options & NAND_BUSWIDTH_16) len = roundup(len, 2); chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page); chip->read_buf(mtd, oob + j, len); j += len; } memcpy(&ecc_code[i], oob, chip->ecc.bytes); chip->ecc.calculate(mtd, p, &ecc_calc[i]); stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); if (stat < 0) { mtd->ecc_stats.failed++; } else { mtd->ecc_stats.corrected += stat; max_bitflips = max_t(unsigned int, max_bitflips, stat); } } return max_bitflips; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij31882.38%114.29%
Boris Brezillon297.51%114.29%
Mike Dunn225.70%114.29%
Vipin Kumar143.63%342.86%
Brian Norris30.78%114.29%
Total386100.00%7100.00%

/* * fsmc_bch8_correct_data * @mtd: mtd info structure * @dat: buffer of read data * @read_ecc: ecc read from device spare area * @calc_ecc: ecc calculated from read data * * calc_ecc is a 104 bit information containing maximum of 8 error * offset informations of 13 bits each in 512 bytes of read data. */
static int fsmc_bch8_correct_data(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc) { struct nand_chip *chip = mtd_to_nand(mtd); struct fsmc_nand_data *host = mtd_to_fsmc(mtd); void __iomem *regs = host->regs_va; unsigned int bank = host->bank; uint32_t err_idx[8]; uint32_t num_err, i; uint32_t ecc1, ecc2, ecc3, ecc4; num_err = (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) >> 10) & 0xF; /* no bit flipping */ if (likely(num_err == 0)) return 0; /* too many errors */ if (unlikely(num_err > 8)) { /* * This is a temporary erase check. A newly erased page read * would result in an ecc error because the oob data is also * erased to FF and the calculated ecc for an FF data is not * FF..FF. * This is a workaround to skip performing correction in case * data is FF..FF * * Logic: * For every page, each bit written as 0 is counted until these * number of bits are greater than 8 (the maximum correction * capability of FSMC for each 512 + 13 bytes) */ int bits_ecc = count_written_bits(read_ecc, chip->ecc.bytes, 8); int bits_data = count_written_bits(dat, chip->ecc.size, 8); if ((bits_ecc + bits_data) <= 8) { if (bits_data) memset(dat, 0xff, chip->ecc.size); return bits_data; } return -EBADMSG; } /* * ------------------- calc_ecc[] bit wise -----------|--13 bits--| * |---idx[7]--|--.....-----|---idx[2]--||---idx[1]--||---idx[0]--| * * calc_ecc is a 104 bit information containing maximum of 8 error * offset informations of 13 bits each. calc_ecc is copied into a * uint64_t array and error offset indexes are populated in err_idx * array */ ecc1 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1)); ecc2 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2)); ecc3 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3)); ecc4 = readl_relaxed(FSMC_NAND_REG(regs, bank, STS)); err_idx[0] = (ecc1 >> 0) & 0x1FFF; err_idx[1] = (ecc1 >> 13) & 0x1FFF; err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F); err_idx[3] = (ecc2 >> 7) & 0x1FFF; err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF); err_idx[5] = (ecc3 >> 1) & 0x1FFF; err_idx[6] = (ecc3 >> 14) & 0x1FFF; err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F); i = 0; while (num_err--) { change_bit(0, (unsigned long *)&err_idx[i]); change_bit(1, (unsigned long *)&err_idx[i]); if (err_idx[i] < chip->ecc.size * 8) { change_bit(err_idx[i], (unsigned long *)dat); i++; } } return i; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij17235.54%111.11%
Vipin Kumar15431.82%444.44%
Armando Visconti15030.99%222.22%
Boris Brezillon81.65%222.22%
Total484100.00%9100.00%


static bool filter(struct dma_chan *chan, void *slave) { chan->private = slave; return true; }

Contributors

PersonTokensPropCommitsCommitProp
Vipin Kumar24100.00%1100.00%
Total24100.00%1100.00%


static int fsmc_nand_probe_config_dt(struct platform_device *pdev, struct device_node *np) { struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); u32 val; int ret; /* Set default NAND width to 8 bits */ pdata->width = 8; if (!of_property_read_u32(np, "bank-width", &val)) { if (val == 2) { pdata->width = 16; } else if (val != 1) { dev_err(&pdev->dev, "invalid bank-width %u\n", val); return -EINVAL; } } if (of_get_property(np, "nand-skip-bbtscan", NULL)) pdata->options = NAND_SKIP_BBTSCAN; pdata->nand_timings = devm_kzalloc(&pdev->dev, sizeof(*pdata->nand_timings), GFP_KERNEL); if (!pdata->nand_timings) return -ENOMEM; ret = of_property_read_u8_array(np, "timings", (u8 *)pdata->nand_timings, sizeof(*pdata->nand_timings)); if (ret) { dev_info(&pdev->dev, "No timings in dts specified, using default timings!\n"); pdata->nand_timings = NULL; } /* Set default NAND bank to 0 */ pdata->bank = 0; if (!of_property_read_u32(np, "bank", &val)) { if (val > 3) { dev_err(&pdev->dev, "invalid bank %u\n", val); return -EINVAL; } pdata->bank = val; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Stefan Roese14056.45%266.67%
Mian Yousaf Kaukab10843.55%133.33%
Total248100.00%3100.00%

/* * fsmc_nand_probe - Probe function * @pdev: platform device structure */
static int __init fsmc_nand_probe(struct platform_device *pdev) { struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); struct device_node __maybe_unused *np = pdev->dev.of_node; struct fsmc_nand_data *host; struct mtd_info *mtd; struct nand_chip *nand; struct resource *res; dma_cap_mask_t mask; int ret = 0; u32 pid; int i; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return -ENOMEM; pdev->dev.platform_data = pdata; ret = fsmc_nand_probe_config_dt(pdev, np); if (ret) { dev_err(&pdev->dev, "no platform data\n"); return -ENODEV; } /* Allocate memory for the device structure (and zero it) */ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); if (!host) return -ENOMEM; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data"); host->data_va = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(host->data_va)) return PTR_ERR(host->data_va); host->data_pa = (dma_addr_t)res->start; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr"); host->addr_va = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(host->addr_va)) return PTR_ERR(host->addr_va); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd"); host->cmd_va = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(host->cmd_va)) return PTR_ERR(host->cmd_va); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs"); host->regs_va = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(host->regs_va)) return PTR_ERR(host->regs_va); host->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(host->clk)) { dev_err(&pdev->dev, "failed to fetch block clock\n"); return PTR_ERR(host->clk); } ret = clk_prepare_enable(host->clk); if (ret) goto err_clk_prepare_enable; /* * This device ID is actually a common AMBA ID as used on the * AMBA PrimeCell bus. However it is not a PrimeCell. */ for (pid = 0, i = 0; i < 4; i++) pid |= (readl(host->regs_va + resource_size(res) - 0x20 + 4 * i) & 255) << (i * 8); host->pid = pid; dev_info(&pdev->dev, "FSMC device partno %03x, manufacturer %02x, " "revision %02x, config %02x\n", AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid), AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid)); host->bank = pdata->bank; host->select_chip = pdata->select_bank; host->partitions = pdata->partitions; host->nr_partitions = pdata->nr_partitions; host->dev = &pdev->dev; host->dev_timings = pdata->nand_timings; host->mode = pdata->mode; if (host->mode == USE_DMA_ACCESS) init_completion(&host->dma_access_complete); /* Link all private pointers */ mtd = nand_to_mtd(&host->nand); nand = &host->nand; nand_set_controller_data(nand, host); nand_set_flash_node(nand, np); mtd->dev.parent = &pdev->dev; nand->IO_ADDR_R = host->data_va; nand->IO_ADDR_W = host->data_va; nand->cmd_ctrl = fsmc_cmd_ctrl; nand->chip_delay = 30; /* * Setup default ECC mode. nand_dt_init() called from nand_scan_ident() * can overwrite this value if the DT provides a different value. */ nand->ecc.mode = NAND_ECC_HW; nand->ecc.hwctl = fsmc_enable_hwecc; nand->ecc.size = 512; nand->options = pdata->options; nand->select_chip = fsmc_select_chip; nand->badblockbits = 7; nand_set_flash_node(nand, np); if (pdata->width == FSMC_NAND_BW16) nand->options |= NAND_BUSWIDTH_16; switch (host->mode) { case USE_DMA_ACCESS: dma_cap_zero(mask); dma_cap_set(DMA_MEMCPY, mask); host->read_dma_chan = dma_request_channel(mask, filter, pdata->read_dma_priv); if (!host->read_dma_chan) { dev_err(&pdev->dev, "Unable to get read dma channel\n"); goto err_req_read_chnl; } host->write_dma_chan = dma_request_channel(mask, filter, pdata->write_dma_priv); if (!host->write_dma_chan) { dev_err(&pdev->dev, "Unable to get write dma channel\n"); goto err_req_write_chnl; } nand->read_buf = fsmc_read_buf_dma; nand->write_buf = fsmc_write_buf_dma; break; default: case USE_WORD_ACCESS: nand->read_buf = fsmc_read_buf; nand->write_buf = fsmc_write_buf; break; } fsmc_nand_setup(host->regs_va, host->bank, nand->options & NAND_BUSWIDTH_16, host->dev_timings); if (AMBA_REV_BITS(host->pid) >= 8) { nand->ecc.read_page = fsmc_read_page_hwecc; nand->ecc.calculate = fsmc_read_hwecc_ecc4; nand->ecc.correct = fsmc_bch8_correct_data; nand->ecc.bytes = 13; nand->ecc.strength = 8; } /* * Scan to find existence of the device */ ret = nand_scan_ident(mtd, 1, NULL); if (ret) { dev_err(&pdev->dev, "No NAND Device found!\n"); goto err_scan_ident; } if (AMBA_REV_BITS(host->pid) >= 8) { switch (mtd->oobsize) { case 16: case 64: case 128: case 224: case 256: break; default: dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n", mtd->oobsize); ret = -EINVAL; goto err_probe; } mtd_set_ooblayout(mtd, &fsmc_ecc4_ooblayout_ops); } else { switch (nand->ecc.mode) { case NAND_ECC_HW: dev_info(&pdev->dev, "Using 1-bit HW ECC scheme\n"); nand->ecc.calculate = fsmc_read_hwecc_ecc1; nand->ecc.correct = nand_correct_data; nand->ecc.bytes = 3; nand->ecc.strength = 1; break; case NAND_ECC_SOFT: if (nand->ecc.algo == NAND_ECC_BCH) { dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n"); break; } default: dev_err(&pdev->dev, "Unsupported ECC mode!\n"); goto err_probe; } /* * Don't set layout for BCH4 SW ECC. This will be * generated later in nand_bch_init() later. */ if (nand->ecc.mode == NAND_ECC_HW) { switch (mtd->oobsize) { case 16: case 64: case 128: mtd_set_ooblayout(mtd, &fsmc_ecc1_ooblayout_ops); break; default: dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n", mtd->oobsize); ret = -EINVAL; goto err_probe; } } } /* Second stage of scan to fill MTD data-structures */ ret = nand_scan_tail(mtd); if (ret) goto err_probe; /* * The partition information can is accessed by (in the same precedence) * * command line through Bootloader, * platform data, * default partition information present in driver. */ /* * Check for partition info passed */ mtd->name = "nand"; ret = mtd_device_register(mtd, host->partitions, host->nr_partitions); if (ret) goto err_probe; platform_set_drvdata(pdev, host); dev_info(&pdev->dev, "FSMC NAND driver registration successful\n"); return 0; err_probe: err_scan_ident: if (host->mode == USE_DMA_ACCESS) dma_release_channel(host->write_dma_chan); err_req_write_chnl: if (host->mode == USE_DMA_ACCESS) dma_release_channel(host->read_dma_chan); err_req_read_chnl: clk_disable_unprepare(host->clk); err_clk_prepare_enable: clk_put(host->clk); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij59446.44%38.82%
Vipin Kumar30023.46%823.53%
Stefan Roese17813.92%38.82%
Bhavna Yadav503.91%12.94%
Thierry Reding322.50%12.94%
Boris Brezillon262.03%38.82%
Jean-Christophe Plagniol-Villard181.41%12.94%
Rafał Miłecki161.25%25.88%
Jingoo Han141.09%12.94%
Brian Norris120.94%25.88%
Masahiro Yamada120.94%12.94%
Mike Dunn80.63%12.94%
Frans Klaver70.55%12.94%
Viresh Kumar40.31%12.94%
Armando Visconti40.31%25.88%
Dmitry Baryshkov30.23%25.88%
Lucas De Marchi10.08%12.94%
Total1279100.00%34100.00%

/* * Clean up routine */
static int fsmc_nand_remove(struct platform_device *pdev) { struct fsmc_nand_data *host = platform_get_drvdata(pdev); if (host) { nand_release(nand_to_mtd(&host->nand)); if (host->mode == USE_DMA_ACCESS) { dma_release_channel(host->write_dma_chan); dma_release_channel(host->read_dma_chan); } clk_disable_unprepare(host->clk); clk_put(host->clk); } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij4962.03%120.00%
Vipin Kumar2430.38%120.00%
Boris Brezillon45.06%120.00%
Axel Lin11.27%120.00%
Viresh Kumar11.27%120.00%
Total79100.00%5100.00%

#ifdef CONFIG_PM_SLEEP
static int fsmc_nand_suspend(struct device *dev) { struct fsmc_nand_data *host = dev_get_drvdata(dev); if (host) clk_disable_unprepare(host->clk); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij3497.14%150.00%
Viresh Kumar12.86%150.00%
Total35100.00%2100.00%


static int fsmc_nand_resume(struct device *dev) { struct fsmc_nand_data *host = dev_get_drvdata(dev); if (host) { clk_prepare_enable(host->clk); fsmc_nand_setup(host->regs_va, host->bank, host->nand.options & NAND_BUSWIDTH_16, host->dev_timings); } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij3456.67%125.00%
Shiraz Hashim2135.00%125.00%
Vipin Kumar46.67%125.00%
Viresh Kumar11.67%125.00%
Total60100.00%4100.00%

#endif static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume); #ifdef CONFIG_OF static const struct of_device_id fsmc_nand_id_table[] = { { .compatible = "st,spear600-fsmc-nand" }, { .compatible = "stericsson,fsmc-nand" }, {} }; MODULE_DEVICE_TABLE(of, fsmc_nand_id_table); #endif static struct platform_driver fsmc_nand_driver = { .remove = fsmc_nand_remove, .driver = { .name = "fsmc-nand", .of_match_table = of_match_ptr(fsmc_nand_id_table), .pm = &fsmc_nand_pm_ops, }, }; module_platform_driver_probe(fsmc_nand_driver, fsmc_nand_probe); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Vipin Kumar <vipin.kumar@st.com>, Ashish Priyadarshi"); MODULE_DESCRIPTION("NAND driver for SPEAr Platforms");

Overall Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij254846.25%47.02%
Vipin Kumar159228.90%1424.56%
Boris Brezillon4337.86%610.53%
Stefan Roese3696.70%47.02%
Armando Visconti1552.81%35.26%
Mian Yousaf Kaukab1081.96%11.75%
Bhavna Yadav711.29%11.75%
Bartlomiej Zolnierkiewicz340.62%11.75%
Thierry Reding320.58%11.75%
Mike Dunn300.54%23.51%
Shiraz Hashim270.49%11.75%
Jingoo Han190.34%35.26%
Jean-Christophe Plagniol-Villard180.33%11.75%
Brian Norris160.29%35.26%
Rafał Miłecki160.29%23.51%
Masahiro Yamada120.22%11.75%
Viresh Kumar70.13%11.75%
Nicholas Mc Guire70.13%23.51%
Frans Klaver70.13%11.75%
Dmitry Baryshkov30.05%23.51%
Lucas De Marchi30.05%11.75%
Axel Lin10.02%11.75%
Vinod Koul10.02%11.75%
Total5509100.00%57100.00%
Directory: drivers/mtd/nand
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.