cregit-Linux how code gets into the kernel

Release 4.11 drivers/net/ethernet/altera/altera_sgdmahw.h

/* Altera TSE SGDMA and MSGDMA Linux driver
 * Copyright (C) 2014 Altera Corporation. All rights reserved
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#ifndef __ALTERA_SGDMAHW_H__

#define __ALTERA_SGDMAHW_H__

/* SGDMA descriptor structure */

struct sgdma_descrip {
	
u32	raddr; /* address of data to be read */
	
u32	pad1;
	
u32	waddr;
	
u32	pad2;
	
u32	next;
	
u32	pad3;
	
u16	bytes;
	
u8	rburst;
	
u8	wburst;
	
u16	bytes_xferred;	/* 16 bits, bytes xferred */

	/* bit 0: error
         * bit 1: length error
         * bit 2: crc error
         * bit 3: truncated error
         * bit 4: phy error
         * bit 5: collision error
         * bit 6: reserved
         * bit 7: status eop for recv case
         */
	
u8	status;

	/* bit 0: eop
         * bit 1: read_fixed
         * bit 2: write fixed
         * bits 3,4,5,6: Channel (always 0)
         * bit 7: hardware owned
         */
	
u8	control;
} 
__packed;


#define SGDMA_DESC_LEN	sizeof(struct sgdma_descrip)


#define SGDMA_STATUS_ERR		BIT(0)

#define SGDMA_STATUS_LENGTH_ERR		BIT(1)

#define SGDMA_STATUS_CRC_ERR		BIT(2)

#define SGDMA_STATUS_TRUNC_ERR		BIT(3)

#define SGDMA_STATUS_PHY_ERR		BIT(4)

#define SGDMA_STATUS_COLL_ERR		BIT(5)

#define SGDMA_STATUS_EOP		BIT(7)


#define SGDMA_CONTROL_EOP		BIT(0)

#define SGDMA_CONTROL_RD_FIXED		BIT(1)

#define SGDMA_CONTROL_WR_FIXED		BIT(2)

/* Channel is always 0, so just zero initialize it */


#define SGDMA_CONTROL_HW_OWNED		BIT(7)

/* SGDMA register space */

struct sgdma_csr {
	/* bit 0: error
         * bit 1: eop
         * bit 2: descriptor completed
         * bit 3: chain completed
         * bit 4: busy
         * remainder reserved
         */
	
u32	status;
	
u32	pad1[3];

	/* bit 0: interrupt on error
         * bit 1: interrupt on eop
         * bit 2: interrupt after every descriptor
         * bit 3: interrupt after last descrip in a chain
         * bit 4: global interrupt enable
         * bit 5: starts descriptor processing
         * bit 6: stop core on dma error
         * bit 7: interrupt on max descriptors
         * bits 8-15: max descriptors to generate interrupt
         * bit 16: Software reset
         * bit 17: clears owned by hardware if 0, does not clear otherwise
         * bit 18: enables descriptor polling mode
         * bit 19-26: clocks before polling again
         * bit 27-30: reserved
         * bit 31: clear interrupt
         */
	
u32	control;
	
u32	pad2[3];
	
u32	next_descrip;
	
u32	pad3[3];
};


#define sgdma_csroffs(a) (offsetof(struct sgdma_csr, a))

#define sgdma_descroffs(a) (offsetof(struct sgdma_descrip, a))


#define SGDMA_STSREG_ERR	BIT(0) 
/* Error */

#define SGDMA_STSREG_EOP	BIT(1) 
/* EOP */

#define SGDMA_STSREG_DESCRIP	BIT(2) 
/* Descriptor completed */

#define SGDMA_STSREG_CHAIN	BIT(3) 
/* Chain completed */

#define SGDMA_STSREG_BUSY	BIT(4) 
/* Controller busy */


#define SGDMA_CTRLREG_IOE	BIT(0) 
/* Interrupt on error */

#define SGDMA_CTRLREG_IOEOP	BIT(1) 
/* Interrupt on EOP */

#define SGDMA_CTRLREG_IDESCRIP	BIT(2) 
/* Interrupt after every descriptor */

#define SGDMA_CTRLREG_ILASTD	BIT(3) 
/* Interrupt after last descriptor */

#define SGDMA_CTRLREG_INTEN	BIT(4) 
/* Global Interrupt enable */

#define SGDMA_CTRLREG_START	BIT(5) 
/* starts descriptor processing */

#define SGDMA_CTRLREG_STOPERR	BIT(6) 
/* stop on dma error */

#define SGDMA_CTRLREG_INTMAX	BIT(7) 
/* Interrupt on max descriptors */

#define SGDMA_CTRLREG_RESET	BIT(16)
/* Software reset */

#define SGDMA_CTRLREG_COBHW	BIT(17)
/* Clears owned by hardware */

#define SGDMA_CTRLREG_POLL	BIT(18)
/* enables descriptor polling mode */

#define SGDMA_CTRLREG_CLRINT	BIT(31)
/* Clears interrupt */

#endif /* __ALTERA_SGDMAHW_H__ */

Overall Contributors

PersonTokensPropCommitsCommitProp
Vince Bridgers23698.33%266.67%
Tobias Klauser41.67%133.33%
Total240100.00%3100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.