cregit-Linux how code gets into the kernel

Release 4.11 drivers/net/ethernet/amazon/ena/ena_eth_io_defs.h

Directory: drivers/net/ethernet/amazon/ena
/*
 * Copyright 2015 - 2016 Amazon.com, Inc. or its affiliates.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
#ifndef _ENA_ETH_IO_H_

#define _ENA_ETH_IO_H_


enum ena_eth_io_l3_proto_index {
	
ENA_ETH_IO_L3_PROTO_UNKNOWN	= 0,

	
ENA_ETH_IO_L3_PROTO_IPV4	= 8,

	
ENA_ETH_IO_L3_PROTO_IPV6	= 11,

	
ENA_ETH_IO_L3_PROTO_FCOE	= 21,

	
ENA_ETH_IO_L3_PROTO_ROCE	= 22,
};


enum ena_eth_io_l4_proto_index {
	
ENA_ETH_IO_L4_PROTO_UNKNOWN		= 0,

	
ENA_ETH_IO_L4_PROTO_TCP			= 12,

	
ENA_ETH_IO_L4_PROTO_UDP			= 13,

	
ENA_ETH_IO_L4_PROTO_ROUTEABLE_ROCE	= 23,
};


struct ena_eth_io_tx_desc {
	/* 15:0 : length - Buffer length in bytes, must
         *    include any packet trailers that the ENA supposed
         *    to update like End-to-End CRC, Authentication GMAC
         *    etc. This length must not include the
         *    'Push_Buffer' length. This length must not include
         *    the 4-byte added in the end for 802.3 Ethernet FCS
         * 21:16 : req_id_hi - Request ID[15:10]
         * 22 : reserved22 - MBZ
         * 23 : meta_desc - MBZ
         * 24 : phase
         * 25 : reserved1 - MBZ
         * 26 : first - Indicates first descriptor in
         *    transaction
         * 27 : last - Indicates last descriptor in
         *    transaction
         * 28 : comp_req - Indicates whether completion
         *    should be posted, after packet is transmitted.
         *    Valid only for first descriptor
         * 30:29 : reserved29 - MBZ
         * 31 : reserved31 - MBZ
         */
	
u32 len_ctrl;

	/* 3:0 : l3_proto_idx - L3 protocol. This field
         *    required when l3_csum_en,l3_csum or tso_en are set.
         * 4 : DF - IPv4 DF, must be 0 if packet is IPv4 and
         *    DF flags of the IPv4 header is 0. Otherwise must
         *    be set to 1
         * 6:5 : reserved5
         * 7 : tso_en - Enable TSO, For TCP only.
         * 12:8 : l4_proto_idx - L4 protocol. This field need
         *    to be set when l4_csum_en or tso_en are set.
         * 13 : l3_csum_en - enable IPv4 header checksum.
         * 14 : l4_csum_en - enable TCP/UDP checksum.
         * 15 : ethernet_fcs_dis - when set, the controller
         *    will not append the 802.3 Ethernet Frame Check
         *    Sequence to the packet
         * 16 : reserved16
         * 17 : l4_csum_partial - L4 partial checksum. when
         *    set to 0, the ENA calculates the L4 checksum,
         *    where the Destination Address required for the
         *    TCP/UDP pseudo-header is taken from the actual
         *    packet L3 header. when set to 1, the ENA doesn't
         *    calculate the sum of the pseudo-header, instead,
         *    the checksum field of the L4 is used instead. When
         *    TSO enabled, the checksum of the pseudo-header
         *    must not include the tcp length field. L4 partial
         *    checksum should be used for IPv6 packet that
         *    contains Routing Headers.
         * 20:18 : reserved18 - MBZ
         * 21 : reserved21 - MBZ
         * 31:22 : req_id_lo - Request ID[9:0]
         */
	
u32 meta_ctrl;

	
u32 buff_addr_lo;

	/* address high and header size
         * 15:0 : addr_hi - Buffer Pointer[47:32]
         * 23:16 : reserved16_w2
         * 31:24 : header_length - Header length. For Low
         *    Latency Queues, this fields indicates the number
         *    of bytes written to the headers' memory. For
         *    normal queues, if packet is TCP or UDP, and longer
         *    than max_header_size, then this field should be
         *    set to the sum of L4 header offset and L4 header
         *    size(without options), otherwise, this field
         *    should be set to 0. For both modes, this field
         *    must not exceed the max_header_size.
         *    max_header_size value is reported by the Max
         *    Queues Feature descriptor
         */
	
u32 buff_addr_hi_hdr_sz;
};


struct ena_eth_io_tx_meta_desc {
	/* 9:0 : req_id_lo - Request ID[9:0]
         * 11:10 : reserved10 - MBZ
         * 12 : reserved12 - MBZ
         * 13 : reserved13 - MBZ
         * 14 : ext_valid - if set, offset fields in Word2
         *    are valid Also MSS High in Word 0 and bits [31:24]
         *    in Word 3
         * 15 : reserved15
         * 19:16 : mss_hi
         * 20 : eth_meta_type - 0: Tx Metadata Descriptor, 1:
         *    Extended Metadata Descriptor
         * 21 : meta_store - Store extended metadata in queue
         *    cache
         * 22 : reserved22 - MBZ
         * 23 : meta_desc - MBO
         * 24 : phase
         * 25 : reserved25 - MBZ
         * 26 : first - Indicates first descriptor in
         *    transaction
         * 27 : last - Indicates last descriptor in
         *    transaction
         * 28 : comp_req - Indicates whether completion
         *    should be posted, after packet is transmitted.
         *    Valid only for first descriptor
         * 30:29 : reserved29 - MBZ
         * 31 : reserved31 - MBZ
         */
	
u32 len_ctrl;

	/* 5:0 : req_id_hi
         * 31:6 : reserved6 - MBZ
         */
	
u32 word1;

	/* 7:0 : l3_hdr_len
         * 15:8 : l3_hdr_off
         * 21:16 : l4_hdr_len_in_words - counts the L4 header
         *    length in words. there is an explicit assumption
         *    that L4 header appears right after L3 header and
         *    L4 offset is based on l3_hdr_off+l3_hdr_len
         * 31:22 : mss_lo
         */
	
u32 word2;

	
u32 reserved;
};


struct ena_eth_io_tx_cdesc {
	/* Request ID[15:0] */
	
u16 req_id;

	
u8 status;

	/* flags
         * 0 : phase
         * 7:1 : reserved1
         */
	
u8 flags;

	
u16 sub_qid;

	
u16 sq_head_idx;
};


struct ena_eth_io_rx_desc {
	/* In bytes. 0 means 64KB */
	
u16 length;

	/* MBZ */
	
u8 reserved2;

	/* 0 : phase
         * 1 : reserved1 - MBZ
         * 2 : first - Indicates first descriptor in
         *    transaction
         * 3 : last - Indicates last descriptor in transaction
         * 4 : comp_req
         * 5 : reserved5 - MBO
         * 7:6 : reserved6 - MBZ
         */
	
u8 ctrl;

	
u16 req_id;

	/* MBZ */
	
u16 reserved6;

	
u32 buff_addr_lo;

	
u16 buff_addr_hi;

	/* MBZ */
	
u16 reserved16_w3;
};

/* 4-word format Note: all ethernet parsing information are valid only when
 * last=1
 */

struct ena_eth_io_rx_cdesc_base {
	/* 4:0 : l3_proto_idx
         * 6:5 : src_vlan_cnt
         * 7 : reserved7 - MBZ
         * 12:8 : l4_proto_idx
         * 13 : l3_csum_err - when set, either the L3
         *    checksum error detected, or, the controller didn't
         *    validate the checksum. This bit is valid only when
         *    l3_proto_idx indicates IPv4 packet
         * 14 : l4_csum_err - when set, either the L4
         *    checksum error detected, or, the controller didn't
         *    validate the checksum. This bit is valid only when
         *    l4_proto_idx indicates TCP/UDP packet, and,
         *    ipv4_frag is not set
         * 15 : ipv4_frag - Indicates IPv4 fragmented packet
         * 23:16 : reserved16
         * 24 : phase
         * 25 : l3_csum2 - second checksum engine result
         * 26 : first - Indicates first descriptor in
         *    transaction
         * 27 : last - Indicates last descriptor in
         *    transaction
         * 29:28 : reserved28
         * 30 : buffer - 0: Metadata descriptor. 1: Buffer
         *    Descriptor was used
         * 31 : reserved31
         */
	
u32 status;

	
u16 length;

	
u16 req_id;

	/* 32-bit hash result */
	
u32 hash;

	
u16 sub_qid;

	
u16 reserved;
};

/* 8-word format */

struct ena_eth_io_rx_cdesc_ext {
	
struct ena_eth_io_rx_cdesc_base base;

	
u32 buff_addr_lo;

	
u16 buff_addr_hi;

	
u16 reserved16;

	
u32 reserved_w6;

	
u32 reserved_w7;
};


struct ena_eth_io_intr_reg {
	/* 14:0 : rx_intr_delay
         * 29:15 : tx_intr_delay
         * 30 : intr_unmask
         * 31 : reserved
         */
	
u32 intr_control;
};


struct ena_eth_io_numa_node_cfg_reg {
	/* 7:0 : numa
         * 30:8 : reserved
         * 31 : enabled
         */
	
u32 numa_cfg;
};

/* tx_desc */

#define ENA_ETH_IO_TX_DESC_LENGTH_MASK GENMASK(15, 0)

#define ENA_ETH_IO_TX_DESC_REQ_ID_HI_SHIFT 16

#define ENA_ETH_IO_TX_DESC_REQ_ID_HI_MASK GENMASK(21, 16)

#define ENA_ETH_IO_TX_DESC_META_DESC_SHIFT 23

#define ENA_ETH_IO_TX_DESC_META_DESC_MASK BIT(23)

#define ENA_ETH_IO_TX_DESC_PHASE_SHIFT 24

#define ENA_ETH_IO_TX_DESC_PHASE_MASK BIT(24)

#define ENA_ETH_IO_TX_DESC_FIRST_SHIFT 26

#define ENA_ETH_IO_TX_DESC_FIRST_MASK BIT(26)

#define ENA_ETH_IO_TX_DESC_LAST_SHIFT 27

#define ENA_ETH_IO_TX_DESC_LAST_MASK BIT(27)

#define ENA_ETH_IO_TX_DESC_COMP_REQ_SHIFT 28

#define ENA_ETH_IO_TX_DESC_COMP_REQ_MASK BIT(28)

#define ENA_ETH_IO_TX_DESC_L3_PROTO_IDX_MASK GENMASK(3, 0)

#define ENA_ETH_IO_TX_DESC_DF_SHIFT 4

#define ENA_ETH_IO_TX_DESC_DF_MASK BIT(4)

#define ENA_ETH_IO_TX_DESC_TSO_EN_SHIFT 7

#define ENA_ETH_IO_TX_DESC_TSO_EN_MASK BIT(7)

#define ENA_ETH_IO_TX_DESC_L4_PROTO_IDX_SHIFT 8

#define ENA_ETH_IO_TX_DESC_L4_PROTO_IDX_MASK GENMASK(12, 8)

#define ENA_ETH_IO_TX_DESC_L3_CSUM_EN_SHIFT 13

#define ENA_ETH_IO_TX_DESC_L3_CSUM_EN_MASK BIT(13)

#define ENA_ETH_IO_TX_DESC_L4_CSUM_EN_SHIFT 14

#define ENA_ETH_IO_TX_DESC_L4_CSUM_EN_MASK BIT(14)

#define ENA_ETH_IO_TX_DESC_ETHERNET_FCS_DIS_SHIFT 15

#define ENA_ETH_IO_TX_DESC_ETHERNET_FCS_DIS_MASK BIT(15)

#define ENA_ETH_IO_TX_DESC_L4_CSUM_PARTIAL_SHIFT 17

#define ENA_ETH_IO_TX_DESC_L4_CSUM_PARTIAL_MASK BIT(17)

#define ENA_ETH_IO_TX_DESC_REQ_ID_LO_SHIFT 22

#define ENA_ETH_IO_TX_DESC_REQ_ID_LO_MASK GENMASK(31, 22)

#define ENA_ETH_IO_TX_DESC_ADDR_HI_MASK GENMASK(15, 0)

#define ENA_ETH_IO_TX_DESC_HEADER_LENGTH_SHIFT 24

#define ENA_ETH_IO_TX_DESC_HEADER_LENGTH_MASK GENMASK(31, 24)

/* tx_meta_desc */

#define ENA_ETH_IO_TX_META_DESC_REQ_ID_LO_MASK GENMASK(9, 0)

#define ENA_ETH_IO_TX_META_DESC_EXT_VALID_SHIFT 14

#define ENA_ETH_IO_TX_META_DESC_EXT_VALID_MASK BIT(14)

#define ENA_ETH_IO_TX_META_DESC_MSS_HI_SHIFT 16

#define ENA_ETH_IO_TX_META_DESC_MSS_HI_MASK GENMASK(19, 16)

#define ENA_ETH_IO_TX_META_DESC_ETH_META_TYPE_SHIFT 20

#define ENA_ETH_IO_TX_META_DESC_ETH_META_TYPE_MASK BIT(20)

#define ENA_ETH_IO_TX_META_DESC_META_STORE_SHIFT 21

#define ENA_ETH_IO_TX_META_DESC_META_STORE_MASK BIT(21)

#define ENA_ETH_IO_TX_META_DESC_META_DESC_SHIFT 23

#define ENA_ETH_IO_TX_META_DESC_META_DESC_MASK BIT(23)

#define ENA_ETH_IO_TX_META_DESC_PHASE_SHIFT 24

#define ENA_ETH_IO_TX_META_DESC_PHASE_MASK BIT(24)

#define ENA_ETH_IO_TX_META_DESC_FIRST_SHIFT 26

#define ENA_ETH_IO_TX_META_DESC_FIRST_MASK BIT(26)

#define ENA_ETH_IO_TX_META_DESC_LAST_SHIFT 27

#define ENA_ETH_IO_TX_META_DESC_LAST_MASK BIT(27)

#define ENA_ETH_IO_TX_META_DESC_COMP_REQ_SHIFT 28

#define ENA_ETH_IO_TX_META_DESC_COMP_REQ_MASK BIT(28)

#define ENA_ETH_IO_TX_META_DESC_REQ_ID_HI_MASK GENMASK(5, 0)

#define ENA_ETH_IO_TX_META_DESC_L3_HDR_LEN_MASK GENMASK(7, 0)

#define ENA_ETH_IO_TX_META_DESC_L3_HDR_OFF_SHIFT 8

#define ENA_ETH_IO_TX_META_DESC_L3_HDR_OFF_MASK GENMASK(15, 8)

#define ENA_ETH_IO_TX_META_DESC_L4_HDR_LEN_IN_WORDS_SHIFT 16

#define ENA_ETH_IO_TX_META_DESC_L4_HDR_LEN_IN_WORDS_MASK GENMASK(21, 16)

#define ENA_ETH_IO_TX_META_DESC_MSS_LO_SHIFT 22

#define ENA_ETH_IO_TX_META_DESC_MSS_LO_MASK GENMASK(31, 22)

/* tx_cdesc */

#define ENA_ETH_IO_TX_CDESC_PHASE_MASK BIT(0)

/* rx_desc */

#define ENA_ETH_IO_RX_DESC_PHASE_MASK BIT(0)

#define ENA_ETH_IO_RX_DESC_FIRST_SHIFT 2

#define ENA_ETH_IO_RX_DESC_FIRST_MASK BIT(2)

#define ENA_ETH_IO_RX_DESC_LAST_SHIFT 3

#define ENA_ETH_IO_RX_DESC_LAST_MASK BIT(3)

#define ENA_ETH_IO_RX_DESC_COMP_REQ_SHIFT 4

#define ENA_ETH_IO_RX_DESC_COMP_REQ_MASK BIT(4)

/* rx_cdesc_base */

#define ENA_ETH_IO_RX_CDESC_BASE_L3_PROTO_IDX_MASK GENMASK(4, 0)

#define ENA_ETH_IO_RX_CDESC_BASE_SRC_VLAN_CNT_SHIFT 5

#define ENA_ETH_IO_RX_CDESC_BASE_SRC_VLAN_CNT_MASK GENMASK(6, 5)

#define ENA_ETH_IO_RX_CDESC_BASE_L4_PROTO_IDX_SHIFT 8

#define ENA_ETH_IO_RX_CDESC_BASE_L4_PROTO_IDX_MASK GENMASK(12, 8)

#define ENA_ETH_IO_RX_CDESC_BASE_L3_CSUM_ERR_SHIFT 13

#define ENA_ETH_IO_RX_CDESC_BASE_L3_CSUM_ERR_MASK BIT(13)

#define ENA_ETH_IO_RX_CDESC_BASE_L4_CSUM_ERR_SHIFT 14

#define ENA_ETH_IO_RX_CDESC_BASE_L4_CSUM_ERR_MASK BIT(14)

#define ENA_ETH_IO_RX_CDESC_BASE_IPV4_FRAG_SHIFT 15

#define ENA_ETH_IO_RX_CDESC_BASE_IPV4_FRAG_MASK BIT(15)

#define ENA_ETH_IO_RX_CDESC_BASE_PHASE_SHIFT 24

#define ENA_ETH_IO_RX_CDESC_BASE_PHASE_MASK BIT(24)

#define ENA_ETH_IO_RX_CDESC_BASE_L3_CSUM2_SHIFT 25

#define ENA_ETH_IO_RX_CDESC_BASE_L3_CSUM2_MASK BIT(25)

#define ENA_ETH_IO_RX_CDESC_BASE_FIRST_SHIFT 26

#define ENA_ETH_IO_RX_CDESC_BASE_FIRST_MASK BIT(26)

#define ENA_ETH_IO_RX_CDESC_BASE_LAST_SHIFT 27

#define ENA_ETH_IO_RX_CDESC_BASE_LAST_MASK BIT(27)

#define ENA_ETH_IO_RX_CDESC_BASE_BUFFER_SHIFT 30

#define ENA_ETH_IO_RX_CDESC_BASE_BUFFER_MASK BIT(30)

/* intr_reg */

#define ENA_ETH_IO_INTR_REG_RX_INTR_DELAY_MASK GENMASK(14, 0)

#define ENA_ETH_IO_INTR_REG_TX_INTR_DELAY_SHIFT 15

#define ENA_ETH_IO_INTR_REG_TX_INTR_DELAY_MASK GENMASK(29, 15)

#define ENA_ETH_IO_INTR_REG_INTR_UNMASK_SHIFT 30

#define ENA_ETH_IO_INTR_REG_INTR_UNMASK_MASK BIT(30)

/* numa_node_cfg_reg */

#define ENA_ETH_IO_NUMA_NODE_CFG_REG_NUMA_MASK GENMASK(7, 0)

#define ENA_ETH_IO_NUMA_NODE_CFG_REG_ENABLED_SHIFT 31

#define ENA_ETH_IO_NUMA_NODE_CFG_REG_ENABLED_MASK BIT(31)

#endif /*_ENA_ETH_IO_H_ */

Overall Contributors
PersonTokensPropCommitsCommitProp
Netanel Belgazal614100.00%1100.00%


Total614100.00%1100.00%


Directory: drivers/net/ethernet/amazon/ena



Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.