cregit-Linux how code gets into the kernel

Release 4.11 drivers/net/ethernet/brocade/bna/bfi_reg.h

Directory: drivers/net/ethernet/brocade/bna
/*
 * Linux network driver for QLogic BR-series Converged Network Adapter.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License (GPL) Version 2 as
 * published by the Free Software Foundation
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 */
/*
 * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
 * Copyright (c) 2014-2015 QLogic Corporation
 * All rights reserved
 * www.qlogic.com
 */

/*
 * bfi_reg.h ASIC register defines for all QLogic BR-series adapter ASICs
 */

#ifndef __BFI_REG_H__

#define __BFI_REG_H__


#define HOSTFN0_INT_STATUS		0x00014000	
/* cb/ct        */

#define HOSTFN1_INT_STATUS		0x00014100	
/* cb/ct        */

#define HOSTFN2_INT_STATUS		0x00014300	
/* ct           */

#define HOSTFN3_INT_STATUS		0x00014400	
/* ct           */

#define HOSTFN0_INT_MSK			0x00014004	
/* cb/ct        */

#define HOSTFN1_INT_MSK			0x00014104	
/* cb/ct        */

#define HOSTFN2_INT_MSK			0x00014304	
/* ct           */

#define HOSTFN3_INT_MSK			0x00014404	
/* ct           */


#define HOST_PAGE_NUM_FN0		0x00014008	
/* cb/ct        */

#define HOST_PAGE_NUM_FN1		0x00014108	
/* cb/ct        */

#define HOST_PAGE_NUM_FN2		0x00014308	
/* ct           */

#define HOST_PAGE_NUM_FN3		0x00014408	
/* ct           */


#define APP_PLL_LCLK_CTL_REG		0x00014204	
/* cb/ct        */

#define __P_LCLK_PLL_LOCK		0x80000000

#define __APP_PLL_LCLK_SRAM_USE_100MHZ	0x00100000

#define __APP_PLL_LCLK_RESET_TIMER_MK	0x000e0000

#define __APP_PLL_LCLK_RESET_TIMER_SH	17

#define __APP_PLL_LCLK_RESET_TIMER(_v)	((_v) << __APP_PLL_LCLK_RESET_TIMER_SH)

#define __APP_PLL_LCLK_LOGIC_SOFT_RESET	0x00010000

#define __APP_PLL_LCLK_CNTLMT0_1_MK	0x0000c000

#define __APP_PLL_LCLK_CNTLMT0_1_SH	14

#define __APP_PLL_LCLK_CNTLMT0_1(_v)	((_v) << __APP_PLL_LCLK_CNTLMT0_1_SH)

#define __APP_PLL_LCLK_JITLMT0_1_MK	0x00003000

#define __APP_PLL_LCLK_JITLMT0_1_SH	12

#define __APP_PLL_LCLK_JITLMT0_1(_v)	((_v) << __APP_PLL_LCLK_JITLMT0_1_SH)

#define __APP_PLL_LCLK_HREF		0x00000800

#define __APP_PLL_LCLK_HDIV		0x00000400

#define __APP_PLL_LCLK_P0_1_MK		0x00000300

#define __APP_PLL_LCLK_P0_1_SH		8

#define __APP_PLL_LCLK_P0_1(_v)		((_v) << __APP_PLL_LCLK_P0_1_SH)

#define __APP_PLL_LCLK_Z0_2_MK		0x000000e0

#define __APP_PLL_LCLK_Z0_2_SH		5

#define __APP_PLL_LCLK_Z0_2(_v)		((_v) << __APP_PLL_LCLK_Z0_2_SH)

#define __APP_PLL_LCLK_RSEL200500	0x00000010

#define __APP_PLL_LCLK_ENARST		0x00000008

#define __APP_PLL_LCLK_BYPASS		0x00000004

#define __APP_PLL_LCLK_LRESETN		0x00000002

#define __APP_PLL_LCLK_ENABLE		0x00000001

#define APP_PLL_SCLK_CTL_REG		0x00014208	
/* cb/ct        */

#define __P_SCLK_PLL_LOCK		0x80000000

#define __APP_PLL_SCLK_RESET_TIMER_MK	0x000e0000

#define __APP_PLL_SCLK_RESET_TIMER_SH	17

#define __APP_PLL_SCLK_RESET_TIMER(_v)	((_v) << __APP_PLL_SCLK_RESET_TIMER_SH)

#define __APP_PLL_SCLK_LOGIC_SOFT_RESET	0x00010000

#define __APP_PLL_SCLK_CNTLMT0_1_MK	0x0000c000

#define __APP_PLL_SCLK_CNTLMT0_1_SH	14

#define __APP_PLL_SCLK_CNTLMT0_1(_v)	((_v) << __APP_PLL_SCLK_CNTLMT0_1_SH)

#define __APP_PLL_SCLK_JITLMT0_1_MK	0x00003000

#define __APP_PLL_SCLK_JITLMT0_1_SH	12

#define __APP_PLL_SCLK_JITLMT0_1(_v)	((_v) << __APP_PLL_SCLK_JITLMT0_1_SH)

#define __APP_PLL_SCLK_HREF		0x00000800

#define __APP_PLL_SCLK_HDIV		0x00000400

#define __APP_PLL_SCLK_P0_1_MK		0x00000300

#define __APP_PLL_SCLK_P0_1_SH		8

#define __APP_PLL_SCLK_P0_1(_v)		((_v) << __APP_PLL_SCLK_P0_1_SH)

#define __APP_PLL_SCLK_Z0_2_MK		0x000000e0

#define __APP_PLL_SCLK_Z0_2_SH		5

#define __APP_PLL_SCLK_Z0_2(_v)		((_v) << __APP_PLL_SCLK_Z0_2_SH)

#define __APP_PLL_SCLK_RSEL200500	0x00000010

#define __APP_PLL_SCLK_ENARST		0x00000008

#define __APP_PLL_SCLK_BYPASS		0x00000004

#define __APP_PLL_SCLK_LRESETN		0x00000002

#define __APP_PLL_SCLK_ENABLE		0x00000001

#define __ENABLE_MAC_AHB_1		0x00800000	
/* ct           */

#define __ENABLE_MAC_AHB_0		0x00400000	
/* ct           */

#define __ENABLE_MAC_1			0x00200000	
/* ct           */

#define __ENABLE_MAC_0			0x00100000	
/* ct           */


#define HOST_SEM0_REG			0x00014230	
/* cb/ct        */

#define HOST_SEM1_REG			0x00014234	
/* cb/ct        */

#define HOST_SEM2_REG			0x00014238	
/* cb/ct        */

#define HOST_SEM3_REG			0x0001423c	
/* cb/ct        */

#define HOST_SEM4_REG			0x00014610	
/* cb/ct        */

#define HOST_SEM5_REG			0x00014614	
/* cb/ct        */

#define HOST_SEM6_REG			0x00014618	
/* cb/ct        */

#define HOST_SEM7_REG			0x0001461c	
/* cb/ct        */

#define HOST_SEM0_INFO_REG		0x00014240	
/* cb/ct        */

#define HOST_SEM1_INFO_REG		0x00014244	
/* cb/ct        */

#define HOST_SEM2_INFO_REG		0x00014248	
/* cb/ct        */

#define HOST_SEM3_INFO_REG		0x0001424c	
/* cb/ct        */

#define HOST_SEM4_INFO_REG		0x00014620	
/* cb/ct        */

#define HOST_SEM5_INFO_REG		0x00014624	
/* cb/ct        */

#define HOST_SEM6_INFO_REG		0x00014628	
/* cb/ct        */

#define HOST_SEM7_INFO_REG		0x0001462c	
/* cb/ct        */


#define HOSTFN0_LPU0_CMD_STAT		0x00019000	
/* cb/ct        */

#define HOSTFN0_LPU1_CMD_STAT		0x00019004	
/* cb/ct        */

#define HOSTFN1_LPU0_CMD_STAT		0x00019010	
/* cb/ct        */

#define HOSTFN1_LPU1_CMD_STAT		0x00019014	
/* cb/ct        */

#define HOSTFN2_LPU0_CMD_STAT		0x00019150	
/* ct           */

#define HOSTFN2_LPU1_CMD_STAT		0x00019154	
/* ct           */

#define HOSTFN3_LPU0_CMD_STAT		0x00019160	
/* ct           */

#define HOSTFN3_LPU1_CMD_STAT		0x00019164	
/* ct           */

#define LPU0_HOSTFN0_CMD_STAT		0x00019008	
/* cb/ct        */

#define LPU1_HOSTFN0_CMD_STAT		0x0001900c	
/* cb/ct        */

#define LPU0_HOSTFN1_CMD_STAT		0x00019018	
/* cb/ct        */

#define LPU1_HOSTFN1_CMD_STAT		0x0001901c	
/* cb/ct        */

#define LPU0_HOSTFN2_CMD_STAT		0x00019158	
/* ct           */

#define LPU1_HOSTFN2_CMD_STAT		0x0001915c	
/* ct           */

#define LPU0_HOSTFN3_CMD_STAT		0x00019168	
/* ct           */

#define LPU1_HOSTFN3_CMD_STAT		0x0001916c	
/* ct           */


#define PSS_CTL_REG			0x00018800	
/* cb/ct        */

#define __PSS_I2C_CLK_DIV_MK		0x007f0000

#define __PSS_I2C_CLK_DIV_SH		16

#define __PSS_I2C_CLK_DIV(_v)		((_v) << __PSS_I2C_CLK_DIV_SH)

#define __PSS_LMEM_INIT_DONE		0x00001000

#define __PSS_LMEM_RESET		0x00000200

#define __PSS_LMEM_INIT_EN		0x00000100

#define __PSS_LPU1_RESET		0x00000002

#define __PSS_LPU0_RESET		0x00000001

#define PSS_ERR_STATUS_REG		0x00018810	
/* cb/ct        */

#define ERR_SET_REG			0x00018818	
/* cb/ct        */

#define PSS_GPIO_OUT_REG		0x000188c0	
/* cb/ct        */

#define __PSS_GPIO_OUT_REG		0x00000fff

#define PSS_GPIO_OE_REG			0x000188c8	
/* cb/ct        */

#define __PSS_GPIO_OE_REG		0x000000ff


#define HOSTFN0_LPU_MBOX0_0		0x00019200	
/* cb/ct        */

#define HOSTFN1_LPU_MBOX0_8		0x00019260	
/* cb/ct        */

#define LPU_HOSTFN0_MBOX0_0		0x00019280	
/* cb/ct        */

#define LPU_HOSTFN1_MBOX0_8		0x000192e0	
/* cb/ct        */

#define HOSTFN2_LPU_MBOX0_0		0x00019400	
/* ct           */

#define HOSTFN3_LPU_MBOX0_8		0x00019460	
/* ct           */

#define LPU_HOSTFN2_MBOX0_0		0x00019480	
/* ct           */

#define LPU_HOSTFN3_MBOX0_8		0x000194e0	
/* ct           */


#define HOST_MSIX_ERR_INDEX_FN0		0x0001400c	
/* ct           */

#define HOST_MSIX_ERR_INDEX_FN1		0x0001410c	
/* ct           */

#define HOST_MSIX_ERR_INDEX_FN2		0x0001430c	
/* ct           */

#define HOST_MSIX_ERR_INDEX_FN3		0x0001440c	
/* ct           */


#define MBIST_CTL_REG			0x00014220	
/* ct           */

#define __EDRAM_BISTR_START		0x00000004

#define MBIST_STAT_REG			0x00014224	
/* ct           */

#define ETH_MAC_SER_REG			0x00014288	
/* ct           */

#define __APP_EMS_CKBUFAMPIN		0x00000020

#define __APP_EMS_REFCLKSEL		0x00000010

#define __APP_EMS_CMLCKSEL		0x00000008

#define __APP_EMS_REFCKBUFEN2		0x00000004

#define __APP_EMS_REFCKBUFEN1		0x00000002

#define __APP_EMS_CHANNEL_SEL		0x00000001

#define FNC_PERS_REG			0x00014604	
/* ct           */

#define __F3_FUNCTION_ACTIVE		0x80000000

#define __F3_FUNCTION_MODE		0x40000000

#define __F3_PORT_MAP_MK		0x30000000

#define __F3_PORT_MAP_SH		28

#define __F3_PORT_MAP(_v)		((_v) << __F3_PORT_MAP_SH)

#define __F3_VM_MODE			0x08000000

#define __F3_INTX_STATUS_MK		0x07000000

#define __F3_INTX_STATUS_SH		24

#define __F3_INTX_STATUS(_v)		((_v) << __F3_INTX_STATUS_SH)

#define __F2_FUNCTION_ACTIVE		0x00800000

#define __F2_FUNCTION_MODE		0x00400000

#define __F2_PORT_MAP_MK		0x00300000

#define __F2_PORT_MAP_SH		20

#define __F2_PORT_MAP(_v)		((_v) << __F2_PORT_MAP_SH)

#define __F2_VM_MODE			0x00080000

#define __F2_INTX_STATUS_MK		0x00070000

#define __F2_INTX_STATUS_SH		16

#define __F2_INTX_STATUS(_v)		((_v) << __F2_INTX_STATUS_SH)

#define __F1_FUNCTION_ACTIVE		0x00008000

#define __F1_FUNCTION_MODE		0x00004000

#define __F1_PORT_MAP_MK		0x00003000

#define __F1_PORT_MAP_SH		12

#define __F1_PORT_MAP(_v)		((_v) << __F1_PORT_MAP_SH)

#define __F1_VM_MODE			0x00000800

#define __F1_INTX_STATUS_MK		0x00000700

#define __F1_INTX_STATUS_SH		8

#define __F1_INTX_STATUS(_v)		((_v) << __F1_INTX_STATUS_SH)

#define __F0_FUNCTION_ACTIVE		0x00000080

#define __F0_FUNCTION_MODE		0x00000040

#define __F0_PORT_MAP_MK		0x00000030

#define __F0_PORT_MAP_SH		4

#define __F0_PORT_MAP(_v)		((_v) << __F0_PORT_MAP_SH)

#define __F0_VM_MODE			0x00000008

#define __F0_INTX_STATUS		0x00000007
enum {
	
__F0_INTX_STATUS_MSIX = 0x0,
	
__F0_INTX_STATUS_INTA = 0x1,
	
__F0_INTX_STATUS_INTB = 0x2,
	
__F0_INTX_STATUS_INTC = 0x3,
	
__F0_INTX_STATUS_INTD = 0x4,
};


#define OP_MODE				0x0001460c

#define __APP_ETH_CLK_LOWSPEED		0x00000004

#define __GLOBAL_CORECLK_HALFSPEED	0x00000002

#define __GLOBAL_FCOE_MODE		0x00000001

#define FW_INIT_HALT_P0			0x000191ac

#define __FW_INIT_HALT_P		0x00000001

#define FW_INIT_HALT_P1			0x000191bc

#define PMM_1T_RESET_REG_P0		0x0002381c

#define __PMM_1T_RESET_P		0x00000001

#define PMM_1T_RESET_REG_P1		0x00023c1c

/* QLogic BR-series 1860 Adapter specific defines */

#define CT2_PCI_CPQ_BASE		0x00030000

#define CT2_PCI_APP_BASE		0x00030100

#define CT2_PCI_ETH_BASE		0x00030400

/*
 * APP block registers
 */

#define CT2_HOSTFN_INT_STATUS		(CT2_PCI_APP_BASE + 0x00)

#define CT2_HOSTFN_INTR_MASK		(CT2_PCI_APP_BASE + 0x04)

#define CT2_HOSTFN_PERSONALITY0		(CT2_PCI_APP_BASE + 0x08)

#define __PME_STATUS_			0x00200000

#define __PF_VF_BAR_SIZE_MODE__MK	0x00180000

#define __PF_VF_BAR_SIZE_MODE__SH	19

#define __PF_VF_BAR_SIZE_MODE_(_v)	((_v) << __PF_VF_BAR_SIZE_MODE__SH)

#define __FC_LL_PORT_MAP__MK		0x00060000

#define __FC_LL_PORT_MAP__SH		17

#define __FC_LL_PORT_MAP_(_v)		((_v) << __FC_LL_PORT_MAP__SH)

#define __PF_VF_ACTIVE_			0x00010000

#define __PF_VF_CFG_RDY_		0x00008000

#define __PF_VF_ENABLE_			0x00004000

#define __PF_DRIVER_ACTIVE_		0x00002000

#define __PF_PME_SEND_ENABLE_		0x00001000

#define __PF_EXROM_OFFSET__MK		0x00000ff0

#define __PF_EXROM_OFFSET__SH		4

#define __PF_EXROM_OFFSET_(_v)		((_v) << __PF_EXROM_OFFSET__SH)

#define __FC_LL_MODE_			0x00000008

#define __PF_INTX_PIN_			0x00000007

#define CT2_HOSTFN_PERSONALITY1		(CT2_PCI_APP_BASE + 0x0C)

#define __PF_NUM_QUEUES1__MK		0xff000000

#define __PF_NUM_QUEUES1__SH		24

#define __PF_NUM_QUEUES1_(_v)		((_v) << __PF_NUM_QUEUES1__SH)

#define __PF_VF_QUE_OFFSET1__MK		0x00ff0000

#define __PF_VF_QUE_OFFSET1__SH		16

#define __PF_VF_QUE_OFFSET1_(_v)	((_v) << __PF_VF_QUE_OFFSET1__SH)

#define __PF_VF_NUM_QUEUES__MK		0x0000ff00

#define __PF_VF_NUM_QUEUES__SH		8

#define __PF_VF_NUM_QUEUES_(_v)		((_v) << __PF_VF_NUM_QUEUES__SH)

#define __PF_VF_QUE_OFFSET_		0x000000ff

#define CT2_HOSTFN_PAGE_NUM		(CT2_PCI_APP_BASE + 0x18)

#define CT2_HOSTFN_MSIX_VT_INDEX_MBOX_ERR	(CT2_PCI_APP_BASE + 0x38)

/*
 * QLogic BR-series 1860 adapter CPQ block registers
 */

#define CT2_HOSTFN_LPU0_MBOX0		(CT2_PCI_CPQ_BASE + 0x00)

#define CT2_HOSTFN_LPU1_MBOX0		(CT2_PCI_CPQ_BASE + 0x20)

#define CT2_LPU0_HOSTFN_MBOX0		(CT2_PCI_CPQ_BASE + 0x40)

#define CT2_LPU1_HOSTFN_MBOX0		(CT2_PCI_CPQ_BASE + 0x60)

#define CT2_HOSTFN_LPU0_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x80)

#define CT2_HOSTFN_LPU1_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x84)

#define CT2_LPU0_HOSTFN_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x88)

#define CT2_LPU1_HOSTFN_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x8c)

#define CT2_HOSTFN_LPU0_READ_STAT	(CT2_PCI_CPQ_BASE + 0x90)

#define CT2_HOSTFN_LPU1_READ_STAT	(CT2_PCI_CPQ_BASE + 0x94)

#define CT2_LPU0_HOSTFN_MBOX0_MSK	(CT2_PCI_CPQ_BASE + 0x98)

#define CT2_LPU1_HOSTFN_MBOX0_MSK	(CT2_PCI_CPQ_BASE + 0x9C)

#define CT2_HOST_SEM0_REG		0x000148f0

#define CT2_HOST_SEM1_REG		0x000148f4

#define CT2_HOST_SEM2_REG		0x000148f8

#define CT2_HOST_SEM3_REG		0x000148fc

#define CT2_HOST_SEM4_REG		0x00014900

#define CT2_HOST_SEM5_REG		0x00014904

#define CT2_HOST_SEM6_REG		0x00014908

#define CT2_HOST_SEM7_REG		0x0001490c

#define CT2_HOST_SEM0_INFO_REG		0x000148b0

#define CT2_HOST_SEM1_INFO_REG		0x000148b4

#define CT2_HOST_SEM2_INFO_REG		0x000148b8

#define CT2_HOST_SEM3_INFO_REG		0x000148bc

#define CT2_HOST_SEM4_INFO_REG		0x000148c0

#define CT2_HOST_SEM5_INFO_REG		0x000148c4

#define CT2_HOST_SEM6_INFO_REG		0x000148c8

#define CT2_HOST_SEM7_INFO_REG		0x000148cc


#define CT2_APP_PLL_LCLK_CTL_REG	0x00014808

#define __APP_LPUCLK_HALFSPEED		0x40000000

#define __APP_PLL_LCLK_LOAD		0x20000000

#define __APP_PLL_LCLK_FBCNT_MK		0x1fe00000

#define __APP_PLL_LCLK_FBCNT_SH		21

#define __APP_PLL_LCLK_FBCNT(_v)	((_v) << __APP_PLL_SCLK_FBCNT_SH)
enum {
	
__APP_PLL_LCLK_FBCNT_425_MHZ = 6,
	
__APP_PLL_LCLK_FBCNT_468_MHZ = 4,
};

#define __APP_PLL_LCLK_EXTFB		0x00000800

#define __APP_PLL_LCLK_ENOUTS		0x00000400

#define __APP_PLL_LCLK_RATE		0x00000010

#define CT2_APP_PLL_SCLK_CTL_REG	0x0001480c

#define __P_SCLK_PLL_LOCK		0x80000000

#define __APP_PLL_SCLK_REFCLK_SEL	0x40000000

#define __APP_PLL_SCLK_CLK_DIV2		0x20000000

#define __APP_PLL_SCLK_LOAD		0x10000000

#define __APP_PLL_SCLK_FBCNT_MK		0x0ff00000

#define __APP_PLL_SCLK_FBCNT_SH		20

#define __APP_PLL_SCLK_FBCNT(_v)	((_v) << __APP_PLL_SCLK_FBCNT_SH)
enum {
	
__APP_PLL_SCLK_FBCNT_NORM = 6,
	
__APP_PLL_SCLK_FBCNT_10G_FC = 10,
};

#define __APP_PLL_SCLK_EXTFB		0x00000800

#define __APP_PLL_SCLK_ENOUTS		0x00000400

#define __APP_PLL_SCLK_RATE		0x00000010

#define CT2_PCIE_MISC_REG		0x00014804

#define __ETH_CLK_ENABLE_PORT1		0x00000010

#define CT2_CHIP_MISC_PRG		0x000148a4

#define __ETH_CLK_ENABLE_PORT0		0x00004000

#define __APP_LPU_SPEED			0x00000002

#define CT2_MBIST_STAT_REG		0x00014818

#define CT2_MBIST_CTL_REG		0x0001481c

#define CT2_PMM_1T_CONTROL_REG_P0	0x0002381c

#define __PMM_1T_PNDB_P			0x00000002

#define CT2_PMM_1T_CONTROL_REG_P1	0x00023c1c

#define CT2_WGN_STATUS			0x00014990

#define __A2T_AHB_LOAD			0x00000800

#define __WGN_READY			0x00000400

#define __GLBL_PF_VF_CFG_RDY		0x00000200

#define CT2_NFC_CSR_CLR_REG             0x00027420

#define CT2_NFC_CSR_SET_REG		0x00027424

#define __HALT_NFC_CONTROLLER		0x00000002

#define __NFC_CONTROLLER_HALTED		0x00001000


#define CT2_RSC_GPR15_REG		0x0002765c

#define CT2_CSI_FW_CTL_REG              0x00027080

#define __RESET_AND_START_SCLK_LCLK_PLLS 0x00010000

#define CT2_CSI_FW_CTL_SET_REG          0x00027088


#define CT2_CSI_MAC0_CONTROL_REG	0x000270d0

#define __CSI_MAC_RESET			0x00000010

#define __CSI_MAC_AHB_RESET		0x00000008

#define CT2_CSI_MAC1_CONTROL_REG	0x000270d4

#define CT2_CSI_MAC_CONTROL_REG(__n) \
	(CT2_CSI_MAC0_CONTROL_REG + \
        (__n) * (CT2_CSI_MAC1_CONTROL_REG - CT2_CSI_MAC0_CONTROL_REG))

/*
 * Name semaphore registers based on usage
 */

#define BFA_IOC0_HBEAT_REG		HOST_SEM0_INFO_REG

#define BFA_IOC0_STATE_REG		HOST_SEM1_INFO_REG

#define BFA_IOC1_HBEAT_REG		HOST_SEM2_INFO_REG

#define BFA_IOC1_STATE_REG		HOST_SEM3_INFO_REG

#define BFA_FW_USE_COUNT		HOST_SEM4_INFO_REG

#define BFA_IOC_FAIL_SYNC		HOST_SEM5_INFO_REG

/*
 * CT2 semaphore register locations changed
 */

#define CT2_BFA_IOC0_HBEAT_REG		CT2_HOST_SEM0_INFO_REG

#define CT2_BFA_IOC0_STATE_REG		CT2_HOST_SEM1_INFO_REG

#define CT2_BFA_IOC1_HBEAT_REG		CT2_HOST_SEM2_INFO_REG

#define CT2_BFA_IOC1_STATE_REG		CT2_HOST_SEM3_INFO_REG

#define CT2_BFA_FW_USE_COUNT		CT2_HOST_SEM4_INFO_REG

#define CT2_BFA_IOC_FAIL_SYNC		CT2_HOST_SEM5_INFO_REG


#define CPE_Q_NUM(__fn, __q)	(((__fn) << 2) + (__q))

#define RME_Q_NUM(__fn, __q)	(((__fn) << 2) + (__q))

/*
 * And corresponding host interrupt status bit field defines
 */

#define __HFN_INT_CPE_Q0	0x00000001U

#define __HFN_INT_CPE_Q1	0x00000002U

#define __HFN_INT_CPE_Q2	0x00000004U

#define __HFN_INT_CPE_Q3	0x00000008U

#define __HFN_INT_CPE_Q4	0x00000010U

#define __HFN_INT_CPE_Q5	0x00000020U

#define __HFN_INT_CPE_Q6	0x00000040U

#define __HFN_INT_CPE_Q7	0x00000080U

#define __HFN_INT_RME_Q0	0x00000100U

#define __HFN_INT_RME_Q1	0x00000200U

#define __HFN_INT_RME_Q2	0x00000400U

#define __HFN_INT_RME_Q3	0x00000800U

#define __HFN_INT_RME_Q4	0x00001000U

#define __HFN_INT_RME_Q5	0x00002000U

#define __HFN_INT_RME_Q6	0x00004000U

#define __HFN_INT_RME_Q7	0x00008000U

#define __HFN_INT_ERR_EMC	0x00010000U

#define __HFN_INT_ERR_LPU0	0x00020000U

#define __HFN_INT_ERR_LPU1	0x00040000U

#define __HFN_INT_ERR_PSS	0x00080000U

#define __HFN_INT_MBOX_LPU0	0x00100000U

#define __HFN_INT_MBOX_LPU1	0x00200000U

#define __HFN_INT_MBOX1_LPU0	0x00400000U

#define __HFN_INT_MBOX1_LPU1	0x00800000U

#define __HFN_INT_LL_HALT	0x01000000U

#define __HFN_INT_CPE_MASK	0x000000ffU

#define __HFN_INT_RME_MASK	0x0000ff00U

#define __HFN_INT_ERR_MASK	\
	(__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 | \
         __HFN_INT_ERR_PSS | __HFN_INT_LL_HALT)

#define __HFN_INT_FN0_MASK	\
	(__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
         __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
         __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0)

#define __HFN_INT_FN1_MASK	\
	(__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
         __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
         __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1)

/*
 * Host interrupt status defines for 1860
 */

#define __HFN_INT_MBOX_LPU0_CT2	0x00010000U

#define __HFN_INT_MBOX_LPU1_CT2	0x00020000U

#define __HFN_INT_ERR_PSS_CT2	0x00040000U

#define __HFN_INT_ERR_LPU0_CT2	0x00080000U

#define __HFN_INT_ERR_LPU1_CT2	0x00100000U

#define __HFN_INT_CPQ_HALT_CT2	0x00200000U

#define __HFN_INT_ERR_WGN_CT2	0x00400000U

#define __HFN_INT_ERR_LEHRX_CT2	0x00800000U

#define __HFN_INT_ERR_LEHTX_CT2	0x01000000U

#define __HFN_INT_ERR_MASK_CT2	\
	(__HFN_INT_ERR_PSS_CT2 | __HFN_INT_ERR_LPU0_CT2 | \
         __HFN_INT_ERR_LPU1_CT2 | __HFN_INT_CPQ_HALT_CT2 | \
         __HFN_INT_ERR_WGN_CT2 | __HFN_INT_ERR_LEHRX_CT2 | \
         __HFN_INT_ERR_LEHTX_CT2)

#define __HFN_INT_FN0_MASK_CT2	\
	(__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
         __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
         __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0_CT2)

#define __HFN_INT_FN1_MASK_CT2	\
	(__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
         __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
         __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1_CT2)

/*
 * asic memory map.
 */

#define PSS_SMEM_PAGE_START		0x8000

#define PSS_SMEM_PGNUM(_pg0, _ma)	((_pg0) + ((_ma) >> 15))

#define PSS_SMEM_PGOFF(_ma)		((_ma) & 0x7fff)

#endif /* __BFI_REG_H__ */

Overall Contributors
PersonTokensPropCommitsCommitProp
Rasesh Mody162698.78%266.67%


Jing Huang201.22%133.33%


Total1646100.00%3100.00%


Directory: drivers/net/ethernet/brocade/bna



Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.