Release 4.11 drivers/net/ethernet/chelsio/cxgb3/firmware_exports.h
/*
* Copyright (c) 2004-2008 Chelsio, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef _FIRMWARE_EXPORTS_H_
#define _FIRMWARE_EXPORTS_H_
/* WR OPCODES supported by the firmware.
*/
#define FW_WROPCODE_FORWARD 0x01
#define FW_WROPCODE_BYPASS 0x05
#define FW_WROPCODE_TUNNEL_TX_PKT 0x03
#define FW_WROPOCDE_ULPTX_DATA_SGL 0x00
#define FW_WROPCODE_ULPTX_MEM_READ 0x02
#define FW_WROPCODE_ULPTX_PKT 0x04
#define FW_WROPCODE_ULPTX_INVALIDATE 0x06
#define FW_WROPCODE_TUNNEL_RX_PKT 0x07
#define FW_WROPCODE_OFLD_GETTCB_RPL 0x08
#define FW_WROPCODE_OFLD_CLOSE_CON 0x09
#define FW_WROPCODE_OFLD_TP_ABORT_CON_REQ 0x0A
#define FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL 0x0F
#define FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ 0x0B
#define FW_WROPCODE_OFLD_TP_ABORT_CON_RPL 0x0C
#define FW_WROPCODE_OFLD_TX_DATA 0x0D
#define FW_WROPCODE_OFLD_TX_DATA_ACK 0x0E
#define FW_WROPCODE_RI_RDMA_INIT 0x10
#define FW_WROPCODE_RI_RDMA_WRITE 0x11
#define FW_WROPCODE_RI_RDMA_READ_REQ 0x12
#define FW_WROPCODE_RI_RDMA_READ_RESP 0x13
#define FW_WROPCODE_RI_SEND 0x14
#define FW_WROPCODE_RI_TERMINATE 0x15
#define FW_WROPCODE_RI_RDMA_READ 0x16
#define FW_WROPCODE_RI_RECEIVE 0x17
#define FW_WROPCODE_RI_BIND_MW 0x18
#define FW_WROPCODE_RI_FASTREGISTER_MR 0x19
#define FW_WROPCODE_RI_LOCAL_INV 0x1A
#define FW_WROPCODE_RI_MODIFY_QP 0x1B
#define FW_WROPCODE_RI_BYPASS 0x1C
#define FW_WROPOCDE_RSVD 0x1E
#define FW_WROPCODE_SGE_EGRESSCONTEXT_RR 0x1F
#define FW_WROPCODE_MNGT 0x1D
#define FW_MNGTOPCODE_PKTSCHED_SET 0x00
/* Maximum size of a WR sent from the host, limited by the SGE.
*
* Note: WR coming from ULP or TP are only limited by CIM.
*/
#define FW_WR_SIZE 128
/* Maximum number of outstanding WRs sent from the host. Value must be
* programmed in the CTRL/TUNNEL/QP SGE Egress Context and used by
* offload modules to limit the number of WRs per connection.
*/
#define FW_T3_WR_NUM 16
#define FW_N3_WR_NUM 7
#ifndef N3
# define FW_WR_NUM FW_T3_WR_NUM
#else
# define FW_WR_NUM FW_N3_WR_NUM
#endif
/* FW_TUNNEL_NUM corresponds to the number of supported TUNNEL Queues. These
* queues must start at SGE Egress Context FW_TUNNEL_SGEEC_START and must
* start at 'TID' (or 'uP Token') FW_TUNNEL_TID_START.
*
* Ingress Traffic (e.g. DMA completion credit) for TUNNEL Queue[i] is sent
* to RESP Queue[i].
*/
#define FW_TUNNEL_NUM 8
#define FW_TUNNEL_SGEEC_START 8
#define FW_TUNNEL_TID_START 65544
/* FW_CTRL_NUM corresponds to the number of supported CTRL Queues. These queues
* must start at SGE Egress Context FW_CTRL_SGEEC_START and must start at 'TID'
* (or 'uP Token') FW_CTRL_TID_START.
*
* Ingress Traffic for CTRL Queue[i] is sent to RESP Queue[i].
*/
#define FW_CTRL_NUM 8
#define FW_CTRL_SGEEC_START 65528
#define FW_CTRL_TID_START 65536
/* FW_OFLD_NUM corresponds to the number of supported OFFLOAD Queues. These
* queues must start at SGE Egress Context FW_OFLD_SGEEC_START.
*
* Note: the 'uP Token' in the SGE Egress Context fields is irrelevant for
* OFFLOAD Queues, as the host is responsible for providing the correct TID in
* every WR.
*
* Ingress Trafffic for OFFLOAD Queue[i] is sent to RESP Queue[i].
*/
#define FW_OFLD_NUM 8
#define FW_OFLD_SGEEC_START 0
/*
*
*/
#define FW_RI_NUM 1
#define FW_RI_SGEEC_START 65527
#define FW_RI_TID_START 65552
/*
* The RX_PKT_TID
*/
#define FW_RX_PKT_NUM 1
#define FW_RX_PKT_TID_START 65553
/* FW_WRC_NUM corresponds to the number of Work Request Context that supported
* by the firmware.
*/
#define FW_WRC_NUM \
(65536 + FW_TUNNEL_NUM + FW_CTRL_NUM + FW_RI_NUM + FW_RX_PKT_NUM)
/*
* FW type and version.
*/
#define S_FW_VERSION_TYPE 28
#define M_FW_VERSION_TYPE 0xF
#define V_FW_VERSION_TYPE(x) ((x) << S_FW_VERSION_TYPE)
#define G_FW_VERSION_TYPE(x) \
(((x) >> S_FW_VERSION_TYPE) & M_FW_VERSION_TYPE)
#define S_FW_VERSION_MAJOR 16
#define M_FW_VERSION_MAJOR 0xFFF
#define V_FW_VERSION_MAJOR(x) ((x) << S_FW_VERSION_MAJOR)
#define G_FW_VERSION_MAJOR(x) \
(((x) >> S_FW_VERSION_MAJOR) & M_FW_VERSION_MAJOR)
#define S_FW_VERSION_MINOR 8
#define M_FW_VERSION_MINOR 0xFF
#define V_FW_VERSION_MINOR(x) ((x) << S_FW_VERSION_MINOR)
#define G_FW_VERSION_MINOR(x) \
(((x) >> S_FW_VERSION_MINOR) & M_FW_VERSION_MINOR)
#define S_FW_VERSION_MICRO 0
#define M_FW_VERSION_MICRO 0xFF
#define V_FW_VERSION_MICRO(x) ((x) << S_FW_VERSION_MICRO)
#define G_FW_VERSION_MICRO(x) \
(((x) >> S_FW_VERSION_MICRO) & M_FW_VERSION_MICRO)
#endif /* _FIRMWARE_EXPORTS_H_ */
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Divy Le Ray | 322 | 98.17% | 3 | 75.00% |
| Jeff Garzik | 6 | 1.83% | 1 | 25.00% |
| Total | 328 | 100.00% | 4 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.