Release 4.11 drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
/*
* drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
* Copyright (c) 2015-2016 Mellanox Technologies. All rights reserved.
* Copyright (c) 2015-2016 Jiri Pirko <jiri@mellanox.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _MLXSW_PCI_HW_H
#define _MLXSW_PCI_HW_H
#include <linux/bitops.h>
#include "item.h"
#define MLXSW_PCI_BAR0_SIZE (1024 * 1024)
/* 1MB */
#define MLXSW_PCI_PAGE_SIZE 4096
#define MLXSW_PCI_CIR_BASE 0x71000
#define MLXSW_PCI_CIR_IN_PARAM_HI MLXSW_PCI_CIR_BASE
#define MLXSW_PCI_CIR_IN_PARAM_LO (MLXSW_PCI_CIR_BASE + 0x04)
#define MLXSW_PCI_CIR_IN_MODIFIER (MLXSW_PCI_CIR_BASE + 0x08)
#define MLXSW_PCI_CIR_OUT_PARAM_HI (MLXSW_PCI_CIR_BASE + 0x0C)
#define MLXSW_PCI_CIR_OUT_PARAM_LO (MLXSW_PCI_CIR_BASE + 0x10)
#define MLXSW_PCI_CIR_TOKEN (MLXSW_PCI_CIR_BASE + 0x14)
#define MLXSW_PCI_CIR_CTRL (MLXSW_PCI_CIR_BASE + 0x18)
#define MLXSW_PCI_CIR_CTRL_GO_BIT BIT(23)
#define MLXSW_PCI_CIR_CTRL_EVREQ_BIT BIT(22)
#define MLXSW_PCI_CIR_CTRL_OPCODE_MOD_SHIFT 12
#define MLXSW_PCI_CIR_CTRL_STATUS_SHIFT 24
#define MLXSW_PCI_CIR_TIMEOUT_MSECS 1000
#define MLXSW_PCI_SW_RESET 0xF0010
#define MLXSW_PCI_SW_RESET_RST_BIT BIT(0)
#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 5000
#define MLXSW_PCI_FW_READY 0xA1844
#define MLXSW_PCI_FW_READY_MASK 0xFFFF
#define MLXSW_PCI_FW_READY_MAGIC 0x5E
#define MLXSW_PCI_DOORBELL_SDQ_OFFSET 0x000
#define MLXSW_PCI_DOORBELL_RDQ_OFFSET 0x200
#define MLXSW_PCI_DOORBELL_CQ_OFFSET 0x400
#define MLXSW_PCI_DOORBELL_EQ_OFFSET 0x600
#define MLXSW_PCI_DOORBELL_ARM_CQ_OFFSET 0x800
#define MLXSW_PCI_DOORBELL_ARM_EQ_OFFSET 0xA00
#define MLXSW_PCI_DOORBELL(offset, type_offset, num) \
((offset) + (type_offset) + (num) * 4)
#define MLXSW_PCI_CQS_MAX 96
#define MLXSW_PCI_EQS_COUNT 2
#define MLXSW_PCI_EQ_ASYNC_NUM 0
#define MLXSW_PCI_EQ_COMP_NUM 1
#define MLXSW_PCI_AQ_PAGES 8
#define MLXSW_PCI_AQ_SIZE (MLXSW_PCI_PAGE_SIZE * MLXSW_PCI_AQ_PAGES)
#define MLXSW_PCI_WQE_SIZE 32
/* 32 bytes per element */
#define MLXSW_PCI_CQE_SIZE 16
/* 16 bytes per element */
#define MLXSW_PCI_EQE_SIZE 16
/* 16 bytes per element */
#define MLXSW_PCI_WQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_WQE_SIZE)
#define MLXSW_PCI_CQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_CQE_SIZE)
#define MLXSW_PCI_EQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_EQE_SIZE)
#define MLXSW_PCI_EQE_UPDATE_COUNT 0x80
#define MLXSW_PCI_WQE_SG_ENTRIES 3
#define MLXSW_PCI_WQE_TYPE_ETHERNET 0xA
/* pci_wqe_c
* If set it indicates that a completion should be reported upon
* execution of this descriptor.
*/
MLXSW_ITEM32(pci, wqe, c, 0x00, 31, 1);
/* pci_wqe_lp
* Local Processing, set if packet should be processed by the local
* switch hardware:
* For Ethernet EMAD (Direct Route and non Direct Route) -
* must be set if packet destination is local device
* For InfiniBand CTL - must be set if packet destination is local device
* Otherwise it must be clear
* Local Process packets must not exceed the size of 2K (including payload
* and headers).
*/
MLXSW_ITEM32(pci, wqe, lp, 0x00, 30, 1);
/* pci_wqe_type
* Packet type.
*/
MLXSW_ITEM32(pci, wqe, type, 0x00, 23, 4);
/* pci_wqe_byte_count
* Size of i-th scatter/gather entry, 0 if entry is unused.
*/
MLXSW_ITEM16_INDEXED(pci, wqe, byte_count, 0x02, 0, 14, 0x02, 0x00, false);
/* pci_wqe_address
* Physical address of i-th scatter/gather entry.
* Gather Entries must be 2Byte aligned.
*/
MLXSW_ITEM64_INDEXED(pci, wqe, address, 0x08, 0, 64, 0x8, 0x0, false);
/* pci_cqe_lag
* Packet arrives from a port which is a LAG
*/
MLXSW_ITEM32(pci, cqe, lag, 0x00, 23, 1);
/* pci_cqe_system_port/lag_id
* When lag=0: System port on which the packet was received
* When lag=1:
* bits [15:4] LAG ID on which the packet was received
* bits [3:0] sub_port on which the packet was received
*/
MLXSW_ITEM32(pci, cqe, system_port, 0x00, 0, 16);
MLXSW_ITEM32(pci, cqe, lag_id, 0x00, 4, 12);
MLXSW_ITEM32(pci, cqe, lag_port_index, 0x00, 0, 4);
/* pci_cqe_wqe_counter
* WQE count of the WQEs completed on the associated dqn
*/
MLXSW_ITEM32(pci, cqe, wqe_counter, 0x04, 16, 16);
/* pci_cqe_byte_count
* Byte count of received packets including additional two
* Reserved Bytes that are append to the end of the frame.
* Reserved for Send CQE.
*/
MLXSW_ITEM32(pci, cqe, byte_count, 0x04, 0, 14);
/* pci_cqe_trap_id
* Trap ID that captured the packet.
*/
MLXSW_ITEM32(pci, cqe, trap_id, 0x08, 0, 8);
/* pci_cqe_crc
* Length include CRC. Indicates the length field includes
* the packet's CRC.
*/
MLXSW_ITEM32(pci, cqe, crc, 0x0C, 8, 1);
/* pci_cqe_e
* CQE with Error.
*/
MLXSW_ITEM32(pci, cqe, e, 0x0C, 7, 1);
/* pci_cqe_sr
* 1 - Send Queue
* 0 - Receive Queue
*/
MLXSW_ITEM32(pci, cqe, sr, 0x0C, 6, 1);
/* pci_cqe_dqn
* Descriptor Queue (DQ) Number.
*/
MLXSW_ITEM32(pci, cqe, dqn, 0x0C, 1, 5);
/* pci_cqe_owner
* Ownership bit.
*/
MLXSW_ITEM32(pci, cqe, owner, 0x0C, 0, 1);
/* pci_eqe_event_type
* Event type.
*/
MLXSW_ITEM32(pci, eqe, event_type, 0x0C, 24, 8);
#define MLXSW_PCI_EQE_EVENT_TYPE_COMP 0x00
#define MLXSW_PCI_EQE_EVENT_TYPE_CMD 0x0A
/* pci_eqe_event_sub_type
* Event type.
*/
MLXSW_ITEM32(pci, eqe, event_sub_type, 0x0C, 16, 8);
/* pci_eqe_cqn
* Completion Queue that triggeret this EQE.
*/
MLXSW_ITEM32(pci, eqe, cqn, 0x0C, 8, 7);
/* pci_eqe_owner
* Ownership bit.
*/
MLXSW_ITEM32(pci, eqe, owner, 0x0C, 0, 1);
/* pci_eqe_cmd_token
* Command completion event - token
*/
MLXSW_ITEM32(pci, eqe, cmd_token, 0x00, 16, 16);
/* pci_eqe_cmd_status
* Command completion event - status
*/
MLXSW_ITEM32(pci, eqe, cmd_status, 0x00, 0, 8);
/* pci_eqe_cmd_out_param_h
* Command completion event - output parameter - higher part
*/
MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x04, 0, 32);
/* pci_eqe_cmd_out_param_l
* Command completion event - output parameter - lower part
*/
MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x08, 0, 32);
#endif
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Jiri Pirko | 612 | 99.19% | 6 | 75.00% |
| Elad Raz | 5 | 0.81% | 2 | 25.00% |
| Total | 617 | 100.00% | 8 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.