cregit-Linux how code gets into the kernel

Release 4.11 drivers/net/ethernet/smsc/smsc911x.h

/***************************************************************************
 *
 * Copyright (C) 2004-2008 SMSC
 * Copyright (C) 2005-2008 ARM
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, see <http://www.gnu.org/licenses/>.
 *
 ***************************************************************************/
#ifndef __SMSC911X_H__

#define __SMSC911X_H__


#define TX_FIFO_LOW_THRESHOLD	((u32)1600)

#define SMSC911X_EEPROM_SIZE	((u32)128)

#define USE_DEBUG		0

/* This is the maximum number of packets to be received every
 * NAPI poll */

#define SMSC_NAPI_WEIGHT	16

/* implements a PHY loopback test at initialisation time, to ensure a packet
 * can be successfully looped back */

#define USE_PHY_WORK_AROUND

#if USE_DEBUG >= 1

#define SMSC_WARN(pdata, nlevel, fmt, args...)			\
	netif_warn(pdata, nlevel, (pdata)->dev,                 \
                   "%s: " fmt "\n", __func__, ##args)
#else

#define SMSC_WARN(pdata, nlevel, fmt, args...)			\
	no_printk(fmt "\n", ##args)
#endif

#if USE_DEBUG >= 2

#define SMSC_TRACE(pdata, nlevel, fmt, args...)			\
	netif_info(pdata, nlevel, pdata->dev, fmt "\n", ##args)
#else

#define SMSC_TRACE(pdata, nlevel, fmt, args...)			\
	no_printk(fmt "\n", ##args)
#endif

#ifdef CONFIG_DEBUG_SPINLOCK

#define SMSC_ASSERT_MAC_LOCK(pdata) \
		WARN_ON_SMP(!spin_is_locked(&pdata->mac_lock))
#else

#define SMSC_ASSERT_MAC_LOCK(pdata) do {} while (0)
#endif				/* CONFIG_DEBUG_SPINLOCK */

/* SMSC911x registers and bitfields */

#define RX_DATA_FIFO			0x00


#define TX_DATA_FIFO			0x20

#define TX_CMD_A_ON_COMP_		0x80000000

#define TX_CMD_A_BUF_END_ALGN_		0x03000000

#define TX_CMD_A_4_BYTE_ALGN_		0x00000000

#define TX_CMD_A_16_BYTE_ALGN_		0x01000000

#define TX_CMD_A_32_BYTE_ALGN_		0x02000000

#define TX_CMD_A_DATA_OFFSET_		0x001F0000

#define TX_CMD_A_FIRST_SEG_		0x00002000

#define TX_CMD_A_LAST_SEG_		0x00001000

#define TX_CMD_A_BUF_SIZE_		0x000007FF

#define TX_CMD_B_PKT_TAG_		0xFFFF0000

#define TX_CMD_B_ADD_CRC_DISABLE_	0x00002000

#define TX_CMD_B_DISABLE_PADDING_	0x00001000

#define TX_CMD_B_PKT_BYTE_LENGTH_	0x000007FF


#define RX_STATUS_FIFO			0x40

#define RX_STS_ES_			0x00008000

#define RX_STS_LENGTH_ERR_		0x00001000

#define RX_STS_MCAST_			0x00000400

#define RX_STS_FRAME_TYPE_		0x00000020

#define RX_STS_CRC_ERR_			0x00000002


#define RX_STATUS_FIFO_PEEK		0x44


#define TX_STATUS_FIFO			0x48

#define TX_STS_ES_			0x00008000

#define TX_STS_LOST_CARRIER_		0x00000800

#define TX_STS_NO_CARRIER_		0x00000400

#define TX_STS_LATE_COL_		0x00000200

#define TX_STS_EXCESS_COL_		0x00000100


#define TX_STATUS_FIFO_PEEK		0x4C


#define ID_REV				0x50

#define ID_REV_CHIP_ID_			0xFFFF0000

#define ID_REV_REV_ID_			0x0000FFFF


#define INT_CFG				0x54

#define INT_CFG_INT_DEAS_		0xFF000000

#define INT_CFG_INT_DEAS_CLR_		0x00004000

#define INT_CFG_INT_DEAS_STS_		0x00002000

#define INT_CFG_IRQ_INT_		0x00001000

#define INT_CFG_IRQ_EN_			0x00000100

#define INT_CFG_IRQ_POL_		0x00000010

#define INT_CFG_IRQ_TYPE_		0x00000001


#define INT_STS				0x58

#define INT_STS_SW_INT_			0x80000000

#define INT_STS_TXSTOP_INT_		0x02000000

#define INT_STS_RXSTOP_INT_		0x01000000

#define INT_STS_RXDFH_INT_		0x00800000

#define INT_STS_RXDF_INT_		0x00400000

#define INT_STS_TX_IOC_			0x00200000

#define INT_STS_RXD_INT_		0x00100000

#define INT_STS_GPT_INT_		0x00080000

#define INT_STS_PHY_INT_		0x00040000

#define INT_STS_PME_INT_		0x00020000

#define INT_STS_TXSO_			0x00010000

#define INT_STS_RWT_			0x00008000

#define INT_STS_RXE_			0x00004000

#define INT_STS_TXE_			0x00002000

#define INT_STS_TDFU_			0x00000800

#define INT_STS_TDFO_			0x00000400

#define INT_STS_TDFA_			0x00000200

#define INT_STS_TSFF_			0x00000100

#define INT_STS_TSFL_			0x00000080

#define INT_STS_RXDF_			0x00000040

#define INT_STS_RDFL_			0x00000020

#define INT_STS_RSFF_			0x00000010

#define INT_STS_RSFL_			0x00000008

#define INT_STS_GPIO2_INT_		0x00000004

#define INT_STS_GPIO1_INT_		0x00000002

#define INT_STS_GPIO0_INT_		0x00000001


#define INT_EN				0x5C

#define INT_EN_SW_INT_EN_		0x80000000

#define INT_EN_TXSTOP_INT_EN_		0x02000000

#define INT_EN_RXSTOP_INT_EN_		0x01000000

#define INT_EN_RXDFH_INT_EN_		0x00800000

#define INT_EN_TIOC_INT_EN_		0x00200000

#define INT_EN_RXD_INT_EN_		0x00100000

#define INT_EN_GPT_INT_EN_		0x00080000

#define INT_EN_PHY_INT_EN_		0x00040000

#define INT_EN_PME_INT_EN_		0x00020000

#define INT_EN_TXSO_EN_			0x00010000

#define INT_EN_RWT_EN_			0x00008000

#define INT_EN_RXE_EN_			0x00004000

#define INT_EN_TXE_EN_			0x00002000

#define INT_EN_TDFU_EN_			0x00000800

#define INT_EN_TDFO_EN_			0x00000400

#define INT_EN_TDFA_EN_			0x00000200

#define INT_EN_TSFF_EN_			0x00000100

#define INT_EN_TSFL_EN_			0x00000080

#define INT_EN_RXDF_EN_			0x00000040

#define INT_EN_RDFL_EN_			0x00000020

#define INT_EN_RSFF_EN_			0x00000010

#define INT_EN_RSFL_EN_			0x00000008

#define INT_EN_GPIO2_INT_		0x00000004

#define INT_EN_GPIO1_INT_		0x00000002

#define INT_EN_GPIO0_INT_		0x00000001


#define BYTE_TEST			0x64


#define FIFO_INT			0x68

#define FIFO_INT_TX_AVAIL_LEVEL_	0xFF000000

#define FIFO_INT_TX_STS_LEVEL_		0x00FF0000

#define FIFO_INT_RX_AVAIL_LEVEL_	0x0000FF00

#define FIFO_INT_RX_STS_LEVEL_		0x000000FF


#define RX_CFG				0x6C

#define RX_CFG_RX_END_ALGN_		0xC0000000

#define RX_CFG_RX_END_ALGN4_		0x00000000

#define RX_CFG_RX_END_ALGN16_		0x40000000

#define RX_CFG_RX_END_ALGN32_		0x80000000

#define RX_CFG_RX_DMA_CNT_		0x0FFF0000

#define RX_CFG_RX_DUMP_			0x00008000

#define RX_CFG_RXDOFF_			0x00001F00


#define TX_CFG				0x70

#define TX_CFG_TXS_DUMP_		0x00008000

#define TX_CFG_TXD_DUMP_		0x00004000

#define TX_CFG_TXSAO_			0x00000004

#define TX_CFG_TX_ON_			0x00000002

#define TX_CFG_STOP_TX_			0x00000001


#define HW_CFG				0x74

#define HW_CFG_TTM_			0x00200000

#define HW_CFG_SF_			0x00100000

#define HW_CFG_TX_FIF_SZ_		0x000F0000

#define HW_CFG_TR_			0x00003000

#define HW_CFG_SRST_			0x00000001

/* only available on 115/117 */

#define HW_CFG_PHY_CLK_SEL_		0x00000060

#define HW_CFG_PHY_CLK_SEL_INT_PHY_	0x00000000

#define HW_CFG_PHY_CLK_SEL_EXT_PHY_	0x00000020

#define HW_CFG_PHY_CLK_SEL_CLK_DIS_	0x00000040

#define HW_CFG_SMI_SEL_		 	0x00000010

#define HW_CFG_EXT_PHY_DET_		0x00000008

#define HW_CFG_EXT_PHY_EN_		0x00000004

#define HW_CFG_SRST_TO_			0x00000002

/* only available  on 116/118 */

#define HW_CFG_32_16_BIT_MODE_		0x00000004


#define RX_DP_CTRL			0x78

#define RX_DP_CTRL_RX_FFWD_		0x80000000


#define RX_FIFO_INF			0x7C

#define RX_FIFO_INF_RXSUSED_		0x00FF0000

#define RX_FIFO_INF_RXDUSED_		0x0000FFFF


#define TX_FIFO_INF			0x80

#define TX_FIFO_INF_TSUSED_		0x00FF0000

#define TX_FIFO_INF_TDFREE_		0x0000FFFF


#define PMT_CTRL			0x84

#define PMT_CTRL_PM_MODE_		0x00003000

#define PMT_CTRL_PM_MODE_D0_		0x00000000

#define PMT_CTRL_PM_MODE_D1_		0x00001000

#define PMT_CTRL_PM_MODE_D2_		0x00002000

#define PMT_CTRL_PM_MODE_D3_		0x00003000

#define PMT_CTRL_PHY_RST_		0x00000400

#define PMT_CTRL_WOL_EN_		0x00000200

#define PMT_CTRL_ED_EN_			0x00000100

#define PMT_CTRL_PME_TYPE_		0x00000040

#define PMT_CTRL_WUPS_			0x00000030

#define PMT_CTRL_WUPS_NOWAKE_		0x00000000

#define PMT_CTRL_WUPS_ED_		0x00000010

#define PMT_CTRL_WUPS_WOL_		0x00000020

#define PMT_CTRL_WUPS_MULTI_		0x00000030

#define PMT_CTRL_PME_IND_		0x00000008

#define PMT_CTRL_PME_POL_		0x00000004

#define PMT_CTRL_PME_EN_		0x00000002

#define PMT_CTRL_READY_			0x00000001


#define GPIO_CFG			0x88

#define GPIO_CFG_LED3_EN_		0x40000000

#define GPIO_CFG_LED2_EN_		0x20000000

#define GPIO_CFG_LED1_EN_		0x10000000

#define GPIO_CFG_GPIO2_INT_POL_		0x04000000

#define GPIO_CFG_GPIO1_INT_POL_		0x02000000

#define GPIO_CFG_GPIO0_INT_POL_		0x01000000

#define GPIO_CFG_EEPR_EN_		0x00700000

#define GPIO_CFG_GPIOBUF2_		0x00040000

#define GPIO_CFG_GPIOBUF1_		0x00020000

#define GPIO_CFG_GPIOBUF0_		0x00010000

#define GPIO_CFG_GPIODIR2_		0x00000400

#define GPIO_CFG_GPIODIR1_		0x00000200

#define GPIO_CFG_GPIODIR0_		0x00000100

#define GPIO_CFG_GPIOD4_		0x00000020

#define GPIO_CFG_GPIOD3_		0x00000010

#define GPIO_CFG_GPIOD2_		0x00000004

#define GPIO_CFG_GPIOD1_		0x00000002

#define GPIO_CFG_GPIOD0_		0x00000001


#define GPT_CFG				0x8C

#define GPT_CFG_TIMER_EN_		0x20000000

#define GPT_CFG_GPT_LOAD_		0x0000FFFF


#define GPT_CNT				0x90

#define GPT_CNT_GPT_CNT_		0x0000FFFF


#define WORD_SWAP			0x98


#define FREE_RUN			0x9C


#define RX_DROP				0xA0


#define MAC_CSR_CMD			0xA4

#define MAC_CSR_CMD_CSR_BUSY_		0x80000000

#define MAC_CSR_CMD_R_NOT_W_		0x40000000

#define MAC_CSR_CMD_CSR_ADDR_		0x000000FF


#define MAC_CSR_DATA			0xA8


#define AFC_CFG				0xAC

#define AFC_CFG_AFC_HI_			0x00FF0000

#define AFC_CFG_AFC_LO_			0x0000FF00

#define AFC_CFG_BACK_DUR_		0x000000F0

#define AFC_CFG_FCMULT_			0x00000008

#define AFC_CFG_FCBRD_			0x00000004

#define AFC_CFG_FCADD_			0x00000002

#define AFC_CFG_FCANY_			0x00000001


#define E2P_CMD				0xB0

#define E2P_CMD_EPC_BUSY_		0x80000000

#define E2P_CMD_EPC_CMD_		0x70000000

#define E2P_CMD_EPC_CMD_READ_		0x00000000

#define E2P_CMD_EPC_CMD_EWDS_		0x10000000

#define E2P_CMD_EPC_CMD_EWEN_		0x20000000

#define E2P_CMD_EPC_CMD_WRITE_		0x30000000

#define E2P_CMD_EPC_CMD_WRAL_		0x40000000

#define E2P_CMD_EPC_CMD_ERASE_		0x50000000

#define E2P_CMD_EPC_CMD_ERAL_		0x60000000

#define E2P_CMD_EPC_CMD_RELOAD_		0x70000000

#define E2P_CMD_EPC_TIMEOUT_		0x00000200

#define E2P_CMD_MAC_ADDR_LOADED_	0x00000100

#define E2P_CMD_EPC_ADDR_		0x000000FF


#define E2P_DATA			0xB4

#define E2P_DATA_EEPROM_DATA_		0x000000FF

#define LAN_REGISTER_EXTENT		0x00000100

/*
 * MAC Control and Status Register (Indirect Address)
 * Offset (through the MAC_CSR CMD and DATA port)
 */

#define MAC_CR				0x01

#define MAC_CR_RXALL_			0x80000000

#define MAC_CR_HBDIS_			0x10000000

#define MAC_CR_RCVOWN_			0x00800000

#define MAC_CR_LOOPBK_			0x00200000

#define MAC_CR_FDPX_			0x00100000

#define MAC_CR_MCPAS_			0x00080000

#define MAC_CR_PRMS_			0x00040000

#define MAC_CR_INVFILT_			0x00020000

#define MAC_CR_PASSBAD_			0x00010000

#define MAC_CR_HFILT_			0x00008000

#define MAC_CR_HPFILT_			0x00002000

#define MAC_CR_LCOLL_			0x00001000

#define MAC_CR_BCAST_			0x00000800

#define MAC_CR_DISRTY_			0x00000400

#define MAC_CR_PADSTR_			0x00000100

#define MAC_CR_BOLMT_MASK_		0x000000C0

#define MAC_CR_DFCHK_			0x00000020

#define MAC_CR_TXEN_			0x00000008

#define MAC_CR_RXEN_			0x00000004


#define ADDRH				0x02


#define ADDRL				0x03


#define HASHH				0x04


#define HASHL				0x05


#define MII_ACC				0x06

#define MII_ACC_PHY_ADDR_		0x0000F800

#define MII_ACC_MIIRINDA_		0x000007C0

#define MII_ACC_MII_WRITE_		0x00000002

#define MII_ACC_MII_BUSY_		0x00000001


#define MII_DATA			0x07


#define FLOW				0x08

#define FLOW_FCPT_			0xFFFF0000

#define FLOW_FCPASS_			0x00000004

#define FLOW_FCEN_			0x00000002

#define FLOW_FCBSY_			0x00000001


#define VLAN1				0x09


#define VLAN2				0x0A


#define WUFF				0x0B


#define WUCSR				0x0C

#define WUCSR_GUE_			0x00000200

#define WUCSR_WUFR_			0x00000040

#define WUCSR_MPR_			0x00000020

#define WUCSR_WAKE_EN_			0x00000004

#define WUCSR_MPEN_			0x00000002

/*
 * Phy definitions (vendor-specific)
 */

#define LAN9118_PHY_ID			0x00C0001C


#define MII_INTSTS			0x1D


#define MII_INTMSK			0x1E

#define PHY_INTMSK_AN_RCV_		(1 << 1)

#define PHY_INTMSK_PDFAULT_		(1 << 2)

#define PHY_INTMSK_AN_ACK_		(1 << 3)

#define PHY_INTMSK_LNKDOWN_		(1 << 4)

#define PHY_INTMSK_RFAULT_		(1 << 5)

#define PHY_INTMSK_AN_COMP_		(1 << 6)

#define PHY_INTMSK_ENERGYON_		(1 << 7)

#define PHY_INTMSK_DEFAULT_		(PHY_INTMSK_ENERGYON_ | \
                                         PHY_INTMSK_AN_COMP_ | \
                                         PHY_INTMSK_RFAULT_ | \
                                         PHY_INTMSK_LNKDOWN_)


#define ADVERTISE_PAUSE_ALL		(ADVERTISE_PAUSE_CAP | \
                                         ADVERTISE_PAUSE_ASYM)


#define LPA_PAUSE_ALL			(LPA_PAUSE_CAP | \
                                         LPA_PAUSE_ASYM)

/*
 * Provide hooks to let the arch add to the initialisation procedure
 * and to override the source of the MAC address.
 */

#define SMSC_INITIALIZE()		do {} while (0)

#define smsc_get_mac(dev)		smsc911x_read_mac_address((dev))

#ifdef CONFIG_SMSC911X_ARCH_HOOKS
#include <asm/smsc911x.h>
#endif

#include <linux/smscphy.h>

#endif				/* __SMSC911X_H__ */

Overall Contributors

PersonTokensPropCommitsCommitProp
Steve Glendinning119396.44%222.22%
Akira Takeuchi211.70%111.11%
Joe Perches141.13%111.11%
Javier Martinez Canillas50.40%111.11%
Jeff Kirsher10.08%111.11%
Sanjeev Sharma10.08%111.11%
André Goddard Rosa10.08%111.11%
John Faith10.08%111.11%
Total1237100.00%9100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.