cregit-Linux how code gets into the kernel

Release 4.11 drivers/net/ethernet/xilinx/ll_temac_mdio.c

/*
 * MDIO bus driver for the Xilinx TEMAC device
 *
 * Copyright (c) 2009 Secret Lab Technologies, Ltd.
 */

#include <linux/io.h>
#include <linux/netdevice.h>
#include <linux/mutex.h>
#include <linux/phy.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/of_mdio.h>

#include "ll_temac.h"

/* ---------------------------------------------------------------------
 * MDIO Bus functions
 */

static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg) { struct temac_local *lp = bus->priv; u32 rc; /* Write the PHY address to the MIIM Access Initiator register. * When the transfer completes, the PHY register value will appear * in the LSW0 register */ mutex_lock(&lp->indirect_mutex); temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg); rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET); mutex_unlock(&lp->indirect_mutex); dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n", phy_id, reg, rc); return rc; }

Contributors

PersonTokensPropCommitsCommitProp
Grant C. Likely88100.00%1100.00%
Total88100.00%1100.00%


static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val) { struct temac_local *lp = bus->priv; dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n", phy_id, reg, val); /* First write the desired value into the write data register * and then write the address into the access initiator register */ mutex_lock(&lp->indirect_mutex); temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val); temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg); mutex_unlock(&lp->indirect_mutex); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Grant C. Likely88100.00%1100.00%
Total88100.00%1100.00%


int temac_mdio_setup(struct temac_local *lp, struct device_node *np) { struct mii_bus *bus; u32 bus_hz; int clk_div; int rc; struct resource res; /* Calculate a reasonable divisor for the clock rate */ clk_div = 0x3f; /* worst-case default setting */ if (of_property_read_u32(np, "clock-frequency", &bus_hz) == 0) { clk_div = bus_hz / (2500 * 1000 * 2) - 1; if (clk_div < 1) clk_div = 1; if (clk_div > 0x3f) clk_div = 0x3f; } /* Enable the MDIO bus by asserting the enable bit and writing * in the clock config */ mutex_lock(&lp->indirect_mutex); temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div); mutex_unlock(&lp->indirect_mutex); bus = mdiobus_alloc(); if (!bus) return -ENOMEM; of_address_to_resource(np, 0, &res); snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", (unsigned long long)res.start); bus->priv = lp; bus->name = "Xilinx TEMAC MDIO"; bus->read = temac_mdio_read; bus->write = temac_mdio_write; bus->parent = lp->dev; lp->mii_bus = bus; rc = of_mdiobus_register(bus, np); if (rc) goto err_register; mutex_lock(&lp->indirect_mutex); dev_dbg(lp->dev, "MDIO bus registered; MC:%x\n", temac_indirect_in32(lp, XTE_MC_OFFSET)); mutex_unlock(&lp->indirect_mutex); return 0; err_register: mdiobus_free(bus); return rc; }

Contributors

PersonTokensPropCommitsCommitProp
Grant C. Likely25798.09%150.00%
Tobias Klauser51.91%150.00%
Total262100.00%2100.00%


void temac_mdio_teardown(struct temac_local *lp) { mdiobus_unregister(lp->mii_bus); mdiobus_free(lp->mii_bus); lp->mii_bus = NULL; }

Contributors

PersonTokensPropCommitsCommitProp
Grant C. Likely30100.00%1100.00%
Total30100.00%1100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
Grant C. Likely48997.80%125.00%
Tobias Klauser51.00%125.00%
Michal Simek30.60%125.00%
Tejun Heo30.60%125.00%
Total500100.00%4100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.