Release 4.11 drivers/net/phy/vitesse.c

/*
 * Driver for Vitesse PHYs
 *
 * Author: Kriston Carson
 *
 * Copyright (c) 2005, 2009, 2011 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>

/* Vitesse Extended Page Magic Register(s) */

#define MII_VSC82X4_EXT_PAGE_16E	0x10

#define MII_VSC82X4_EXT_PAGE_17E	0x11

#define MII_VSC82X4_EXT_PAGE_18E	0x12

/* Vitesse Extended Control Register 1 */

#define MII_VSC8244_EXT_CON1           0x17

#define MII_VSC8244_EXTCON1_INIT       0x0000

#define MII_VSC8244_EXTCON1_TX_SKEW_MASK	0x0c00

#define MII_VSC8244_EXTCON1_RX_SKEW_MASK	0x0300

#define MII_VSC8244_EXTCON1_TX_SKEW	0x0800

#define MII_VSC8244_EXTCON1_RX_SKEW	0x0200

/* Vitesse Interrupt Mask Register */

#define MII_VSC8244_IMASK		0x19

#define MII_VSC8244_IMASK_IEN		0x8000

#define MII_VSC8244_IMASK_SPEED		0x4000

#define MII_VSC8244_IMASK_LINK		0x2000

#define MII_VSC8244_IMASK_DUPLEX	0x1000

#define MII_VSC8244_IMASK_MASK		0xf000


#define MII_VSC8221_IMASK_MASK		0xa000

/* Vitesse Interrupt Status Register */

#define MII_VSC8244_ISTAT		0x1a

#define MII_VSC8244_ISTAT_STATUS	0x8000

#define MII_VSC8244_ISTAT_SPEED		0x4000

#define MII_VSC8244_ISTAT_LINK		0x2000

#define MII_VSC8244_ISTAT_DUPLEX	0x1000

/* Vitesse Auxiliary Control/Status Register */

#define MII_VSC8244_AUX_CONSTAT		0x1c

#define MII_VSC8244_AUXCONSTAT_INIT	0x0000

#define MII_VSC8244_AUXCONSTAT_DUPLEX	0x0020

#define MII_VSC8244_AUXCONSTAT_SPEED	0x0018

#define MII_VSC8244_AUXCONSTAT_GBIT	0x0010

#define MII_VSC8244_AUXCONSTAT_100	0x0008


#define MII_VSC8221_AUXCONSTAT_INIT	0x0004 
/* need to set this bit? */

#define MII_VSC8221_AUXCONSTAT_RESERVED	0x0004

/* Vitesse Extended Page Access Register */

#define MII_VSC82X4_EXT_PAGE_ACCESS	0x1f

/* Vitesse VSC8601 Extended PHY Control Register 1 */

#define MII_VSC8601_EPHY_CTL		0x17

#define MII_VSC8601_EPHY_CTL_RGMII_SKEW	(1 << 8)


#define PHY_ID_VSC8234			0x000fc620

#define PHY_ID_VSC8244			0x000fc6c0

#define PHY_ID_VSC8514			0x00070670

#define PHY_ID_VSC8572			0x000704d0

#define PHY_ID_VSC8574			0x000704a0

#define PHY_ID_VSC8601			0x00070420

#define PHY_ID_VSC8662			0x00070660

#define PHY_ID_VSC8221			0x000fc550

#define PHY_ID_VSC8211			0x000fc4b0

MODULE_DESCRIPTION("Vitesse PHY driver");
MODULE_AUTHOR("Kriston Carson");
MODULE_LICENSE("GPL");



static int vsc824x_add_skew(struct phy_device *phydev)
{
	int err;
	int extcon;

	extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);

	if (extcon < 0)
		return extcon;

	extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK |
			MII_VSC8244_EXTCON1_RX_SKEW_MASK);

	extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
			MII_VSC8244_EXTCON1_RX_SKEW);

	err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);

	return err;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Andy Fleming
41
62.12%
2
50.00%
Jon Loeliger
24
36.36%
1
25.00%
Stephen Hemminger
1
1.52%
1
25.00%
Total
66
100.00%
4
100.00%



static int vsc824x_config_init(struct phy_device *phydev)
{
	int err;

	err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
			MII_VSC8244_AUXCONSTAT_INIT);
	if (err < 0)
		return err;

	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
		err = vsc824x_add_skew(phydev);

	return err;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Andy Fleming
52
100.00%
1
100.00%
Total
52
100.00%
1
100.00%

/* This adds a skew for both TX and RX clocks, so the skew should only be
 * applied to "rgmii-id" interfaces. It may not work as expected
 * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */


static int vsc8601_add_skew(struct phy_device *phydev)
{
	int ret;

	ret = phy_read(phydev, MII_VSC8601_EPHY_CTL);
	if (ret < 0)
		return ret;

	ret |= MII_VSC8601_EPHY_CTL_RGMII_SKEW;
	return phy_write(phydev, MII_VSC8601_EPHY_CTL, ret);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alex Gershgorin
46
100.00%
1
100.00%
Total
46
100.00%
1
100.00%



static int vsc8601_config_init(struct phy_device *phydev)
{
	int ret = 0;

	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
		ret = vsc8601_add_skew(phydev);

	if (ret < 0)
		return ret;

	return genphy_config_init(phydev);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alex Gershgorin
46
100.00%
1
100.00%
Total
46
100.00%
1
100.00%



static int vsc824x_ack_interrupt(struct phy_device *phydev)
{
	int err = 0;

	/* Don't bother to ACK the interrupts if interrupts
         * are disabled.  The 824x cannot clear the interrupts
         * if they are disabled.
         */
	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
		err = phy_read(phydev, MII_VSC8244_ISTAT);

	return (err < 0) ? err : 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Jon Loeliger
31
68.89%
1
33.33%
Andy Fleming
13
28.89%
1
33.33%
Michal Simek
1
2.22%
1
33.33%
Total
45
100.00%
3
100.00%



static int vsc82xx_config_intr(struct phy_device *phydev)
{
	int err;

	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
		err = phy_write(phydev, MII_VSC8244_IMASK,
			(phydev->drv->phy_id == PHY_ID_VSC8234 ||
			 phydev->drv->phy_id == PHY_ID_VSC8244 ||
			 phydev->drv->phy_id == PHY_ID_VSC8514 ||
			 phydev->drv->phy_id == PHY_ID_VSC8572 ||
			 phydev->drv->phy_id == PHY_ID_VSC8574 ||
			 phydev->drv->phy_id == PHY_ID_VSC8601) ?
				MII_VSC8244_IMASK_MASK :
				MII_VSC8221_IMASK_MASK);
	else {
		/* The Vitesse PHY cannot clear the interrupt
                 * once it has disabled them, so we clear them first
                 */
		err = phy_read(phydev, MII_VSC8244_ISTAT);

		if (err < 0)
			return err;

		err = phy_write(phydev, MII_VSC8244_IMASK, 0);
	}

	return err;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Jon Loeliger
47
38.84%
1
10.00%
Andy Fleming
30
24.79%
3
30.00%
Shaohui Xie
16
13.22%
2
20.00%
Trent Piepho
11
9.09%
1
10.00%
Måns Rullgård
8
6.61%
1
10.00%
Stephen Agate
8
6.61%
1
10.00%
Michal Simek
1
0.83%
1
10.00%
Total
121
100.00%
10
100.00%



static int vsc8221_config_init(struct phy_device *phydev)
{
	int err;

	err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
			MII_VSC8221_AUXCONSTAT_INIT);
	return err;

	/* Perhaps we should set EXT_CON1 based on the interface?
         * Options are 802.3Z SerDes or SGMII
         */
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Christian Hohnstaedt
28
96.55%
1
50.00%
Michal Simek
1
3.45%
1
50.00%
Total
29
100.00%
2
100.00%

/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links
 * @phydev: target phy_device struct
 *
 * Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing
 * special values in the VSC8234/VSC8244 extended reserved registers
 */


static int vsc82x4_config_autocross_enable(struct phy_device *phydev)
{
	int ret;

	if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100)
		return 0;

	/* map extended registers set 0x10 - 0x1e */
	ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5);
	if (ret >= 0)
		ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012);
	if (ret >= 0)
		ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803);
	if (ret >= 0)
		ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa);
	/* map standard registers set 0x10 - 0x1e */
	if (ret >= 0)
		ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
	else
		phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);

	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Madalin Bucur
125
100.00%
1
100.00%
Total
125
100.00%
1
100.00%

/* vsc82x4_config_aneg - restart auto-negotiation or write BMCR
 * @phydev: target phy_device struct
 *
 * Description: If auto-negotiation is enabled, we configure the
 *   advertising, and then restart auto-negotiation.  If it is not
 *   enabled, then we write the BMCR and also start the auto
 *   MDI/MDI-X feature
 */


static int vsc82x4_config_aneg(struct phy_device *phydev)
{
	int ret;

	/* Enable auto MDI/MDI-X when in 10/100 forced link speeds by
         * writing special values in the VSC8234 extended reserved registers
         */
	if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) {
		ret = genphy_setup_forced(phydev);

		if (ret < 0) /* error */
			return ret;

		return vsc82x4_config_autocross_enable(phydev);
	}

	return genphy_config_aneg(phydev);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Madalin Bucur
60
100.00%
1
100.00%
Total
60
100.00%
1
100.00%

/* Vitesse 82xx */

static struct phy_driver vsc82xx_driver[] = {
{
	.phy_id         = PHY_ID_VSC8234,
	.name           = "Vitesse VSC8234",
	.phy_id_mask    = 0x000ffff0,
	.features       = PHY_GBIT_FEATURES,
	.flags          = PHY_HAS_INTERRUPT,
	.config_init    = &vsc824x_config_init,
	.config_aneg    = &vsc82x4_config_aneg,
	.read_status    = &genphy_read_status,
	.ack_interrupt  = &vsc824x_ack_interrupt,
	.config_intr    = &vsc82xx_config_intr,
}, {
	.phy_id		= PHY_ID_VSC8244,
	.name		= "Vitesse VSC8244",
	.phy_id_mask	= 0x000fffc0,
	.features	= PHY_GBIT_FEATURES,
	.flags		= PHY_HAS_INTERRUPT,
	.config_init	= &vsc824x_config_init,
	.config_aneg	= &vsc82x4_config_aneg,
	.read_status	= &genphy_read_status,
	.ack_interrupt	= &vsc824x_ack_interrupt,
	.config_intr	= &vsc82xx_config_intr,
}, {
	.phy_id		= PHY_ID_VSC8514,
	.name		= "Vitesse VSC8514",
	.phy_id_mask	= 0x000ffff0,
	.features	= PHY_GBIT_FEATURES,
	.flags		= PHY_HAS_INTERRUPT,
	.config_init	= &vsc824x_config_init,
	.config_aneg	= &vsc82x4_config_aneg,
	.read_status	= &genphy_read_status,
	.ack_interrupt	= &vsc824x_ack_interrupt,
	.config_intr	= &vsc82xx_config_intr,
}, {
	.phy_id         = PHY_ID_VSC8572,
	.name           = "Vitesse VSC8572",
	.phy_id_mask    = 0x000ffff0,
	.features       = PHY_GBIT_FEATURES,
	.flags          = PHY_HAS_INTERRUPT,
	.config_init    = &vsc824x_config_init,
	.config_aneg    = &vsc82x4_config_aneg,
	.read_status    = &genphy_read_status,
	.ack_interrupt  = &vsc824x_ack_interrupt,
	.config_intr    = &vsc82xx_config_intr,
}, {
	.phy_id         = PHY_ID_VSC8574,
	.name           = "Vitesse VSC8574",
	.phy_id_mask    = 0x000ffff0,
	.features       = PHY_GBIT_FEATURES,
	.flags          = PHY_HAS_INTERRUPT,
	.config_init    = &vsc824x_config_init,
	.config_aneg    = &vsc82x4_config_aneg,
	.read_status    = &genphy_read_status,
	.ack_interrupt  = &vsc824x_ack_interrupt,
	.config_intr    = &vsc82xx_config_intr,
}, {
	.phy_id         = PHY_ID_VSC8601,
	.name           = "Vitesse VSC8601",
	.phy_id_mask    = 0x000ffff0,
	.features       = PHY_GBIT_FEATURES,
	.flags          = PHY_HAS_INTERRUPT,
	.config_init    = &vsc8601_config_init,
	.config_aneg    = &genphy_config_aneg,
	.read_status    = &genphy_read_status,
	.ack_interrupt  = &vsc824x_ack_interrupt,
	.config_intr    = &vsc82xx_config_intr,
}, {
	.phy_id         = PHY_ID_VSC8662,
	.name           = "Vitesse VSC8662",
	.phy_id_mask    = 0x000ffff0,
	.features       = PHY_GBIT_FEATURES,
	.flags          = PHY_HAS_INTERRUPT,
	.config_init    = &vsc824x_config_init,
	.config_aneg    = &vsc82x4_config_aneg,
	.read_status    = &genphy_read_status,
	.ack_interrupt  = &vsc824x_ack_interrupt,
	.config_intr    = &vsc82xx_config_intr,
}, {
	/* Vitesse 8221 */
	.phy_id		= PHY_ID_VSC8221,
	.phy_id_mask	= 0x000ffff0,
	.name		= "Vitesse VSC8221",
	.features	= PHY_GBIT_FEATURES,
	.flags		= PHY_HAS_INTERRUPT,
	.config_init	= &vsc8221_config_init,
	.config_aneg	= &genphy_config_aneg,
	.read_status	= &genphy_read_status,
	.ack_interrupt	= &vsc824x_ack_interrupt,
	.config_intr	= &vsc82xx_config_intr,
}, {
	/* Vitesse 8211 */
	.phy_id		= PHY_ID_VSC8211,
	.phy_id_mask	= 0x000ffff0,
	.name		= "Vitesse VSC8211",
	.features	= PHY_GBIT_FEATURES,
	.flags		= PHY_HAS_INTERRUPT,
	.config_init	= &vsc8221_config_init,
	.config_aneg	= &genphy_config_aneg,
	.read_status	= &genphy_read_status,
	.ack_interrupt	= &vsc824x_ack_interrupt,
	.config_intr	= &vsc82xx_config_intr,
} };


module_phy_driver(vsc82xx_driver);


static struct mdio_device_id __maybe_unused vitesse_tbl[] = {
	{ PHY_ID_VSC8234, 0x000ffff0 },
	{ PHY_ID_VSC8244, 0x000fffc0 },
	{ PHY_ID_VSC8514, 0x000ffff0 },
	{ PHY_ID_VSC8572, 0x000ffff0 },
	{ PHY_ID_VSC8574, 0x000ffff0 },
	{ PHY_ID_VSC8662, 0x000ffff0 },
	{ PHY_ID_VSC8221, 0x000ffff0 },
	{ PHY_ID_VSC8211, 0x000ffff0 },
	{ }
};

MODULE_DEVICE_TABLE(mdio, vitesse_tbl);
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Jon Loeliger
271
19.48%
1
4.76%
Andy Fleming
220
15.82%
5
23.81%
Madalin Bucur
210
15.10%
1
4.76%
Shaohui Xie
149
10.71%
2
9.52%
Alex Gershgorin
103
7.40%
1
4.76%
Trent Piepho
92
6.61%
1
4.76%
Stephen Agate
75
5.39%
1
4.76%
Michal Simek
71
5.10%
2
9.52%
Måns Rullgård
68
4.89%
1
4.76%
Sandeep Singh
66
4.74%
1
4.76%
Christian Hohnstaedt
33
2.37%
1
4.76%
David Woodhouse
29
2.08%
1
4.76%
Johan Hovold
2
0.14%
1
4.76%
Stephen Hemminger
1
0.07%
1
4.76%
Uwe Kleine-König
1
0.07%
1
4.76%
Total
1391
100.00%
21
100.00%
Directory: drivers/net/phy

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.