cregit-Linux how code gets into the kernel

Release 4.11 drivers/net/usb/cdc_eem.c

Directory: drivers/net/usb
/*
 * USB CDC EEM network interface driver
 * Copyright (C) 2009 Oberthur Technologies
 * by Omar Laazimani, Olivier Condemine
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, see <http://www.gnu.org/licenses/>.
 */

#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ctype.h>
#include <linux/ethtool.h>
#include <linux/workqueue.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/crc32.h>
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
#include <linux/gfp.h>
#include <linux/if_vlan.h>


/*
 * This driver is an implementation of the CDC "Ethernet Emulation
 * Model" (EEM) specification, which encapsulates Ethernet frames
 * for transport over USB using a simpler USB device model than the
 * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet").
 *
 * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf
 *
 * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24,
 * 2.6.27 and 2.6.30rc2 kernel.
 * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel).
 * build on 23-April-2009
 */


#define EEM_HEAD	2		
/* 2 byte header */

/*-------------------------------------------------------------------------*/


static void eem_linkcmd_complete(struct urb *urb) { dev_kfree_skb(urb->context); usb_free_urb(urb); }

Contributors

PersonTokensPropCommitsCommitProp
Omar Laazimani23100.00%1100.00%
Total23100.00%1100.00%


static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb) { struct urb *urb; int status; urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) goto fail; usb_fill_bulk_urb(urb, dev->udev, dev->out, skb->data, skb->len, eem_linkcmd_complete, skb); status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { usb_free_urb(urb); fail: dev_kfree_skb(skb); netdev_warn(dev->net, "link cmd failure\n"); return; } }

Contributors

PersonTokensPropCommitsCommitProp
Omar Laazimani10097.09%150.00%
Joe Perches32.91%150.00%
Total103100.00%2100.00%


static int eem_bind(struct usbnet *dev, struct usb_interface *intf) { int status = 0; status = usbnet_get_endpoints(dev, intf); if (status < 0) { usb_set_intfdata(intf, NULL); usb_driver_release_interface(driver_of(intf), intf); return status; } /* no jumbogram (16K) support for now */ dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN + VLAN_HLEN; dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Omar Laazimani7280.00%133.33%
Rabin Vincent1617.78%133.33%
Ian Coolidge22.22%133.33%
Total90100.00%3100.00%

/* * EEM permits packing multiple Ethernet frames into USB transfers * (a "bundle"), but for TX we don't try to do that. */
static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { struct sk_buff *skb2 = NULL; u16 len = skb->len; u32 crc = 0; int padlen = 0; /* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is * zero, stick two bytes of zero length EEM packet on the end. * Else the framework would add invalid single byte padding, * since it can't know whether ZLPs will be handled right by * all the relevant hardware and software. */ if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket)) padlen += 2; if (!skb_cloned(skb)) { int headroom = skb_headroom(skb); int tailroom = skb_tailroom(skb); if ((tailroom >= ETH_FCS_LEN + padlen) && (headroom >= EEM_HEAD)) goto done; if ((headroom + tailroom) > (EEM_HEAD + ETH_FCS_LEN + padlen)) { skb->data = memmove(skb->head + EEM_HEAD, skb->data, skb->len); skb_set_tail_pointer(skb, len); goto done; } } skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags); if (!skb2) return NULL; dev_kfree_skb_any(skb); skb = skb2; done: /* we don't use the "no Ethernet CRC" option */ crc = crc32_le(~0, skb->data, skb->len); crc = ~crc; put_unaligned_le32(crc, skb_put(skb, 4)); /* EEM packet header format: * b0..13: length of ethernet frame * b14: bmCRC (1 == valid Ethernet CRC) * b15: bmType (0 == data) */ len = skb->len; put_unaligned_le16(BIT(14) | len, skb_push(skb, 2)); /* Bundle a zero length EEM packet if needed */ if (padlen) put_unaligned_le16(0, skb_put(skb, 2)); return skb; }

Contributors

PersonTokensPropCommitsCommitProp
Omar Laazimani273100.00%1100.00%
Total273100.00%1100.00%


static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb) { /* * Our task here is to strip off framing, leaving skb with one * data frame for the usbnet framework code to process. But we * may have received multiple EEM payloads, or command payloads. * So we must process _everything_ as if it's a header, except * maybe the last data payload * * REVISIT the framework needs updating so that when we consume * all payloads (the last or only message was a command, or a * zero length EEM packet) that is not accounted as an rx_error. */ do { struct sk_buff *skb2 = NULL; u16 header; u16 len = 0; /* incomplete EEM header? */ if (skb->len < EEM_HEAD) return 0; /* * EEM packet header format: * b0..14: EEM type dependent (Data or Command) * b15: bmType */ header = get_unaligned_le16(skb->data); skb_pull(skb, EEM_HEAD); /* * The bmType bit helps to denote when EEM * packet is data or command : * bmType = 0 : EEM data payload * bmType = 1 : EEM (link) command */ if (header & BIT(15)) { u16 bmEEMCmd; /* * EEM (link) command packet: * b0..10: bmEEMCmdParam * b11..13: bmEEMCmd * b14: bmReserved (must be 0) * b15: 1 (EEM command) */ if (header & BIT(14)) { netdev_dbg(dev->net, "reserved command %04x\n", header); continue; } bmEEMCmd = (header >> 11) & 0x7; switch (bmEEMCmd) { /* Responding to echo requests is mandatory. */ case 0: /* Echo command */ len = header & 0x7FF; /* bogus command? */ if (skb->len < len) return 0; skb2 = skb_clone(skb, GFP_ATOMIC); if (unlikely(!skb2)) goto next; skb_trim(skb2, len); put_unaligned_le16(BIT(15) | (1 << 11) | len, skb_push(skb2, 2)); eem_linkcmd(dev, skb2); break; /* * Host may choose to ignore hints. * - suspend: peripheral ready to suspend * - response: suggest N millisec polling * - response complete: suggest N sec polling * * Suspend is reported and maybe heeded. */ case 2: /* Suspend hint */ usbnet_device_suggests_idle(dev); continue; case 3: /* Response hint */ case 4: /* Response complete hint */ continue; /* * Hosts should never receive host-to-peripheral * or reserved command codes; or responses to an * echo command we didn't send. */ case 1: /* Echo response */ case 5: /* Tickle */ default: /* reserved */ netdev_warn(dev->net, "unexpected link command %d\n", bmEEMCmd); continue; } } else { u32 crc, crc2; int is_last; /* zero length EEM packet? */ if (header == 0) continue; /* * EEM data packet header : * b0..13: length of ethernet frame * b14: bmCRC * b15: 0 (EEM data) */ len = header & 0x3FFF; /* bogus EEM payload? */ if (skb->len < len) return 0; /* bogus ethernet frame? */ if (len < (ETH_HLEN + ETH_FCS_LEN)) goto next; /* * Treat the last payload differently: framework * code expects our "fixup" to have stripped off * headers, so "skb" is a data packet (or error). * Else if it's not the last payload, keep "skb" * for further processing. */ is_last = (len == skb->len); if (is_last) skb2 = skb; else { skb2 = skb_clone(skb, GFP_ATOMIC); if (unlikely(!skb2)) return 0; } /* * The bmCRC helps to denote when the CRC field in * the Ethernet frame contains a calculated CRC: * bmCRC = 1 : CRC is calculated * bmCRC = 0 : CRC = 0xDEADBEEF */ if (header & BIT(14)) { crc = get_unaligned_le32(skb2->data + len - ETH_FCS_LEN); crc2 = ~crc32_le(~0, skb2->data, skb2->len - ETH_FCS_LEN); } else { crc = get_unaligned_be32(skb2->data + len - ETH_FCS_LEN); crc2 = 0xdeadbeef; } skb_trim(skb2, len - ETH_FCS_LEN); if (is_last) return crc == crc2; if (unlikely(crc != crc2)) { dev->net->stats.rx_errors++; dev_kfree_skb_any(skb2); } else usbnet_skb_return(dev, skb2); } next: skb_pull(skb, len); } while (skb->len); return 1; }

Contributors

PersonTokensPropCommitsCommitProp
Omar Laazimani41588.11%114.29%
Brian Niebuhr388.07%114.29%
Oliver Neukum71.49%114.29%
Joe Perches61.27%114.29%
Vincent Cuissard20.42%114.29%
Herbert Xu20.42%114.29%
Lucas De Marchi10.21%114.29%
Total471100.00%7100.00%

static const struct driver_info eem_info = { .description = "CDC EEM Device", .flags = FLAG_ETHER | FLAG_POINTTOPOINT, .bind = eem_bind, .rx_fixup = eem_rx_fixup, .tx_fixup = eem_tx_fixup, }; /*-------------------------------------------------------------------------*/ static const struct usb_device_id products[] = { { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM, USB_CDC_PROTO_EEM), .driver_info = (unsigned long) &eem_info, }, { /* EMPTY == end of list */ }, }; MODULE_DEVICE_TABLE(usb, products); static struct usb_driver eem_driver = { .name = "cdc_eem", .id_table = products, .probe = usbnet_probe, .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, .disable_hub_initiated_lpm = 1, }; module_usb_driver(eem_driver); MODULE_AUTHOR("Omar Laazimani <omar.oberthur@gmail.com>"); MODULE_DESCRIPTION("USB CDC EEM"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
Omar Laazimani105591.98%17.14%
Brian Niebuhr383.31%17.14%
Rabin Vincent161.39%17.14%
Joe Perches90.78%17.14%
Oliver Neukum70.61%17.14%
Ian Coolidge50.44%17.14%
Sarah Sharp50.44%17.14%
Tejun Heo30.26%17.14%
Arnd Bergmann20.17%17.14%
Herbert Xu20.17%17.14%
Vincent Cuissard20.17%17.14%
Greg Kroah-Hartman10.09%17.14%
Lucas De Marchi10.09%17.14%
Jeff Kirsher10.09%17.14%
Total1147100.00%14100.00%
Directory: drivers/net/usb
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.