cregit-Linux how code gets into the kernel

Release 4.11 drivers/net/wimax/i2400m/i2400m-usb.h

/*
 * Intel Wireless WiMAX Connection 2400m
 * USB-specific i2400m driver definitions
 *
 *
 * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in
 *     the documentation and/or other materials provided with the
 *     distribution.
 *   * Neither the name of Intel Corporation nor the names of its
 *     contributors may be used to endorse or promote products derived
 *     from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *
 * Intel Corporation <linux-wimax@intel.com>
 * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
 * Yanir Lubetkin <yanirx.lubetkin@intel.com>
 *  - Initial implementation
 *
 *
 * This driver implements the bus-specific part of the i2400m for
 * USB. Check i2400m.h for a generic driver description.
 *
 * ARCHITECTURE
 *
 * This driver listens to notifications sent from the notification
 * endpoint (in usb-notif.c); when data is ready to read, the code in
 * there schedules a read from the device (usb-rx.c) and then passes
 * the data to the generic RX code (rx.c).
 *
 * When the generic driver needs to send data (network or control), it
 * queues up in the TX FIFO (tx.c) and that will notify the driver
 * through the i2400m->bus_tx_kick() callback
 * (usb-tx.c:i2400mu_bus_tx_kick) which will send the items in the
 * FIFO queue.
 *
 * This driver, as well, implements the USB-specific ops for the generic
 * driver to be able to setup/teardown communication with the device
 * [i2400m_bus_dev_start() and i2400m_bus_dev_stop()], reseting the
 * device [i2400m_bus_reset()] and performing firmware upload
 * [i2400m_bus_bm_cmd() and i2400_bus_bm_wait_for_ack()].
 */

#ifndef __I2400M_USB_H__

#define __I2400M_USB_H__

#include "i2400m.h"
#include <linux/kthread.h>


/*
 * Error Density Count: cheapo error density (over time) counter
 *
 * Originally by Reinette Chatre <reinette.chatre@intel.com>
 *
 * Embed an 'struct edc' somewhere. Each time there is a soft or
 * retryable error, call edc_inc() and check if the error top
 * watermark has been reached.
 */
enum {
	
EDC_MAX_ERRORS = 10,
	
EDC_ERROR_TIMEFRAME = HZ,
};

/* error density counter */

struct edc {
	
unsigned long timestart;
	
u16 errorcount;
};


struct i2400m_endpoint_cfg {
	
unsigned char bulk_out;
	
unsigned char notification;
	
unsigned char reset_cold;
	
unsigned char bulk_in;
};


static inline void edc_init(struct edc *edc) { edc->timestart = jiffies; }

Contributors

PersonTokensPropCommitsCommitProp
Iñaky Pérez-González18100.00%1100.00%
Total18100.00%1100.00%

/** * edc_inc - report a soft error and check if we are over the watermark * * @edc: pointer to error density counter. * @max_err: maximum number of errors we can accept over the timeframe * @timeframe: length of the timeframe (in jiffies). * * Returns: !0 1 if maximum acceptable errors per timeframe has been * exceeded. 0 otherwise. * * This is way to determine if the number of acceptable errors per time * period has been exceeded. It is not accurate as there are cases in which * this scheme will not work, for example if there are periodic occurrences * of errors that straddle updates to the start time. This scheme is * sufficient for our usage. * * To use, embed a 'struct edc' somewhere, initialize it with * edc_init() and when an error hits: * * if (do_something_fails_with_a_soft_error) { * if (edc_inc(&my->edc, MAX_ERRORS, MAX_TIMEFRAME)) * Ops, hard error, do something about it * else * Retry or ignore, depending on whatever * } */
static inline int edc_inc(struct edc *edc, u16 max_err, u16 timeframe) { unsigned long now; now = jiffies; if (now - edc->timestart > timeframe) { edc->errorcount = 1; edc->timestart = now; } else if (++edc->errorcount > max_err) { edc->errorcount = 0; edc->timestart = now; return 1; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Iñaky Pérez-González80100.00%1100.00%
Total80100.00%1100.00%

/* Host-Device interface for USB */ enum { I2400M_USB_BOOT_RETRIES = 3, I2400MU_MAX_NOTIFICATION_LEN = 256, I2400MU_BLK_SIZE = 16, I2400MU_PL_SIZE_MAX = 0x3EFF, /* Device IDs */ USB_DEVICE_ID_I6050 = 0x0186, USB_DEVICE_ID_I6050_2 = 0x0188, USB_DEVICE_ID_I6150 = 0x07d6, USB_DEVICE_ID_I6150_2 = 0x07d7, USB_DEVICE_ID_I6150_3 = 0x07d9, USB_DEVICE_ID_I6250 = 0x0187, }; /** * struct i2400mu - descriptor for a USB connected i2400m * * @i2400m: bus-generic i2400m implementation; has to be first (see * it's documentation in i2400m.h). * * @usb_dev: pointer to our USB device * * @usb_iface: pointer to our USB interface * * @urb_edc: error density counter; used to keep a density-on-time tab * on how many soft (retryable or ignorable) errors we get. If we * go over the threshold, we consider the bus transport is failing * too much and reset. * * @notif_urb: URB for receiving notifications from the device. * * @tx_kthread: thread we use for data TX. We use a thread because in * order to do deep power saving and put the device to sleep, we * need to call usb_autopm_*() [blocking functions]. * * @tx_wq: waitqueue for the TX kthread to sleep when there is no data * to be sent; when more data is available, it is woken up by * i2400mu_bus_tx_kick(). * * @rx_kthread: thread we use for data RX. We use a thread because in * order to do deep power saving and put the device to sleep, we * need to call usb_autopm_*() [blocking functions]. * * @rx_wq: waitqueue for the RX kthread to sleep when there is no data * to receive. When data is available, it is woken up by * usb-notif.c:i2400mu_notification_grok(). * * @rx_pending_count: number of rx-data-ready notifications that were * still not handled by the RX kthread. * * @rx_size: current RX buffer size that is being used. * * @rx_size_acc: accumulator of the sizes of the previous read * transactions. * * @rx_size_cnt: number of read transactions accumulated in * @rx_size_acc. * * @do_autopm: disable(0)/enable(>0) calling the * usb_autopm_get/put_interface() barriers when executing * commands. See doc in i2400mu_suspend() for more information. * * @rx_size_auto_shrink: if true, the rx_size is shrunk * automatically based on the average size of the received * transactions. This allows the receive code to allocate smaller * chunks of memory and thus reduce pressure on the memory * allocator by not wasting so much space. By default it is * enabled. * * @debugfs_dentry: hookup for debugfs files. * These have to be in a separate directory, a child of * (wimax_dev->debugfs_dentry) so they can be removed when the * module unloads, as we don't keep each dentry. */ struct i2400mu { struct i2400m i2400m; /* FIRST! See doc */ struct usb_device *usb_dev; struct usb_interface *usb_iface; struct edc urb_edc; /* Error density counter */ struct i2400m_endpoint_cfg endpoint_cfg; struct urb *notif_urb; struct task_struct *tx_kthread; wait_queue_head_t tx_wq; struct task_struct *rx_kthread; wait_queue_head_t rx_wq; atomic_t rx_pending_count; size_t rx_size, rx_size_acc, rx_size_cnt; atomic_t do_autopm; u8 rx_size_auto_shrink; struct dentry *debugfs_dentry; unsigned i6050:1; /* 1 if this is a 6050 based SKU */ };
static inline void i2400mu_init(struct i2400mu *i2400mu) { i2400m_init(&i2400mu->i2400m); edc_init(&i2400mu->urb_edc); init_waitqueue_head(&i2400mu->tx_wq); atomic_set(&i2400mu->rx_pending_count, 0); init_waitqueue_head(&i2400mu->rx_wq); i2400mu->rx_size = PAGE_SIZE - sizeof(struct skb_shared_info); atomic_set(&i2400mu->do_autopm, 1); i2400mu->rx_size_auto_shrink = 1; }

Contributors

PersonTokensPropCommitsCommitProp
Iñaky Pérez-González82100.00%1100.00%
Total82100.00%1100.00%

int i2400mu_notification_setup(struct i2400mu *); void i2400mu_notification_release(struct i2400mu *); int i2400mu_rx_setup(struct i2400mu *); void i2400mu_rx_release(struct i2400mu *); void i2400mu_rx_kick(struct i2400mu *); int i2400mu_tx_setup(struct i2400mu *); void i2400mu_tx_release(struct i2400mu *); void i2400mu_bus_tx_kick(struct i2400m *); ssize_t i2400mu_bus_bm_cmd_send(struct i2400m *, const struct i2400m_bootrom_header *, size_t, int); ssize_t i2400mu_bus_bm_wait_for_ack(struct i2400m *, struct i2400m_bootrom_header *, size_t); #endif /* #ifndef __I2400M_USB_H__ */

Overall Contributors

PersonTokensPropCommitsCommitProp
Iñaky Pérez-González40988.72%225.00%
Dirk Brandewie347.38%337.50%
Dan J Williams122.60%112.50%
Alexey Shvetsov40.87%112.50%
Lucas De Marchi20.43%112.50%
Total461100.00%8100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.