cregit-Linux how code gets into the kernel

Release 4.11 drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h

/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
 * Copyright(c) 2016        Intel Deutschland GmbH
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 * USA
 *
 * The full GNU General Public License is included in this distribution
 * in the file called COPYING.
 *
 * Contact Information:
 *  Intel Linux Wireless <linuxwifi@intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
 * Copyright(c) 2016        Intel Deutschland GmbH
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *****************************************************************************/

#ifndef __fw_api_h__

#define __fw_api_h__

#include "fw-api-rs.h"
#include "fw-api-rx.h"
#include "fw-api-tx.h"
#include "fw-api-sta.h"
#include "fw-api-mac.h"
#include "fw-api-power.h"
#include "fw-api-d3.h"
#include "fw-api-coex.h"
#include "fw-api-scan.h"
#include "fw-api-stats.h"
#include "fw-api-tof.h"

/* Tx queue numbers for non-DQA mode */
enum {
	
IWL_MVM_OFFCHANNEL_QUEUE = 8,
	
IWL_MVM_CMD_QUEUE = 9,
};

/*
 * DQA queue numbers
 *
 * @IWL_MVM_DQA_CMD_QUEUE: a queue reserved for sending HCMDs to the FW
 * @IWL_MVM_DQA_AUX_QUEUE: a queue reserved for aux frames
 * @IWL_MVM_DQA_P2P_DEVICE_QUEUE: a queue reserved for P2P device frames
 * @IWL_MVM_DQA_GCAST_QUEUE: a queue reserved for P2P GO/SoftAP GCAST frames
 * @IWL_MVM_DQA_BSS_CLIENT_QUEUE: a queue reserved for BSS activity, to ensure
 *      that we are never left without the possibility to connect to an AP.
 * @IWL_MVM_DQA_MIN_MGMT_QUEUE: first TXQ in pool for MGMT and non-QOS frames.
 *      Each MGMT queue is mapped to a single STA
 *      MGMT frames are frames that return true on ieee80211_is_mgmt()
 * @IWL_MVM_DQA_MAX_MGMT_QUEUE: last TXQ in pool for MGMT frames
 * @IWL_MVM_DQA_AP_PROBE_RESP_QUEUE: a queue reserved for P2P GO/SoftAP probe
 *      responses
 * @IWL_MVM_DQA_MIN_DATA_QUEUE: first TXQ in pool for DATA frames.
 *      DATA frames are intended for !ieee80211_is_mgmt() frames, but if
 *      the MGMT TXQ pool is exhausted, mgmt frames can be sent on DATA queues
 *      as well
 * @IWL_MVM_DQA_MAX_DATA_QUEUE: last TXQ in pool for DATA frames
 */

enum iwl_mvm_dqa_txq {
	
IWL_MVM_DQA_CMD_QUEUE = 0,
	
IWL_MVM_DQA_AUX_QUEUE = 1,
	
IWL_MVM_DQA_P2P_DEVICE_QUEUE = 2,
	
IWL_MVM_DQA_GCAST_QUEUE = 3,
	
IWL_MVM_DQA_BSS_CLIENT_QUEUE = 4,
	
IWL_MVM_DQA_MIN_MGMT_QUEUE = 5,
	
IWL_MVM_DQA_MAX_MGMT_QUEUE = 8,
	
IWL_MVM_DQA_AP_PROBE_RESP_QUEUE = 9,
	
IWL_MVM_DQA_MIN_DATA_QUEUE = 10,
	
IWL_MVM_DQA_MAX_DATA_QUEUE = 31,
};


enum iwl_mvm_tx_fifo {
	
IWL_MVM_TX_FIFO_BK = 0,
	
IWL_MVM_TX_FIFO_BE,
	
IWL_MVM_TX_FIFO_VI,
	
IWL_MVM_TX_FIFO_VO,
	
IWL_MVM_TX_FIFO_MCAST = 5,
	
IWL_MVM_TX_FIFO_CMD = 7,
};


/* commands */
enum {
	
MVM_ALIVE = 0x1,
	
REPLY_ERROR = 0x2,
	
ECHO_CMD = 0x3,

	
INIT_COMPLETE_NOTIF = 0x4,

	/* PHY context commands */
	
PHY_CONTEXT_CMD = 0x8,
	
DBG_CFG = 0x9,
	
ANTENNA_COUPLING_NOTIFICATION = 0xa,

	/* UMAC scan commands */
	
SCAN_ITERATION_COMPLETE_UMAC = 0xb5,
	
SCAN_CFG_CMD = 0xc,
	
SCAN_REQ_UMAC = 0xd,
	
SCAN_ABORT_UMAC = 0xe,
	
SCAN_COMPLETE_UMAC = 0xf,

	
BA_WINDOW_STATUS_NOTIFICATION_ID = 0x13,

	/* station table */
	
ADD_STA_KEY = 0x17,
	
ADD_STA = 0x18,
	
REMOVE_STA = 0x19,

	/* paging get item */
	
FW_GET_ITEM_CMD = 0x1a,

	/* TX */
	
TX_CMD = 0x1c,
	
TXPATH_FLUSH = 0x1e,
	
MGMT_MCAST_KEY = 0x1f,

	/* scheduler config */
	
SCD_QUEUE_CFG = 0x1d,

	/* global key */
	
WEP_KEY = 0x20,

	/* Memory */
	
SHARED_MEM_CFG = 0x25,

	/* TDLS */
	
TDLS_CHANNEL_SWITCH_CMD = 0x27,
	
TDLS_CHANNEL_SWITCH_NOTIFICATION = 0xaa,
	
TDLS_CONFIG_CMD = 0xa7,

	/* MAC and Binding commands */
	
MAC_CONTEXT_CMD = 0x28,
	
TIME_EVENT_CMD = 0x29, /* both CMD and response */
	
TIME_EVENT_NOTIFICATION = 0x2a,
	
BINDING_CONTEXT_CMD = 0x2b,
	
TIME_QUOTA_CMD = 0x2c,
	
NON_QOS_TX_COUNTER_CMD = 0x2d,

	
LQ_CMD = 0x4e,

	/* paging block to FW cpu2 */
	
FW_PAGING_BLOCK_CMD = 0x4f,

	/* Scan offload */
	
SCAN_OFFLOAD_REQUEST_CMD = 0x51,
	
SCAN_OFFLOAD_ABORT_CMD = 0x52,
	
HOT_SPOT_CMD = 0x53,
	
SCAN_OFFLOAD_COMPLETE = 0x6D,
	
SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E,
	
SCAN_OFFLOAD_CONFIG_CMD = 0x6f,
	
MATCH_FOUND_NOTIFICATION = 0xd9,
	
SCAN_ITERATION_COMPLETE = 0xe7,

	/* Phy */
	
PHY_CONFIGURATION_CMD = 0x6a,
	
CALIB_RES_NOTIF_PHY_DB = 0x6b,
	
PHY_DB_CMD = 0x6c,

	/* ToF - 802.11mc FTM */
	
TOF_CMD = 0x10,
	
TOF_NOTIFICATION = 0x11,

	/* Power - legacy power table command */
	
POWER_TABLE_CMD = 0x77,
	
PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78,
	
LTR_CONFIG = 0xee,

	/* Thermal Throttling*/
	
REPLY_THERMAL_MNG_BACKOFF = 0x7e,

	/* Set/Get DC2DC frequency tune */
	
DC2DC_CONFIG_CMD = 0x83,

	/* NVM */
	
NVM_ACCESS_CMD = 0x88,

	
SET_CALIB_DEFAULT_CMD = 0x8e,

	
BEACON_NOTIFICATION = 0x90,
	
BEACON_TEMPLATE_CMD = 0x91,
	
TX_ANT_CONFIGURATION_CMD = 0x98,
	
STATISTICS_CMD = 0x9c,
	
STATISTICS_NOTIFICATION = 0x9d,
	
EOSP_NOTIFICATION = 0x9e,
	
REDUCE_TX_POWER_CMD = 0x9f,

	/* RF-KILL commands and notifications */
	
CARD_STATE_CMD = 0xa0,
	
CARD_STATE_NOTIFICATION = 0xa1,

	
MISSED_BEACONS_NOTIFICATION = 0xa2,

	/* Power - new power table command */
	
MAC_PM_POWER_TABLE = 0xa9,

	
MFUART_LOAD_NOTIFICATION = 0xb1,

	
RSS_CONFIG_CMD = 0xb3,

	
REPLY_RX_PHY_CMD = 0xc0,
	
REPLY_RX_MPDU_CMD = 0xc1,
	
FRAME_RELEASE = 0xc3,
	
BA_NOTIF = 0xc5,

	/* Location Aware Regulatory */
	
MCC_UPDATE_CMD = 0xc8,
	
MCC_CHUB_UPDATE_CMD = 0xc9,

	
MARKER_CMD = 0xcb,

	/* BT Coex */
	
BT_COEX_PRIO_TABLE = 0xcc,
	
BT_COEX_PROT_ENV = 0xcd,
	
BT_PROFILE_NOTIFICATION = 0xce,
	
BT_CONFIG = 0x9b,
	
BT_COEX_UPDATE_SW_BOOST = 0x5a,
	
BT_COEX_UPDATE_CORUN_LUT = 0x5b,
	
BT_COEX_UPDATE_REDUCED_TXP = 0x5c,
	
BT_COEX_CI = 0x5d,

	
REPLY_SF_CFG_CMD = 0xd1,
	
REPLY_BEACON_FILTERING_CMD = 0xd2,

	/* DTS measurements */
	
CMD_DTS_MEASUREMENT_TRIGGER = 0xdc,
	
DTS_MEASUREMENT_NOTIFICATION = 0xdd,

	
REPLY_DEBUG_CMD = 0xf0,
	
LDBG_CONFIG_CMD = 0xf6,
	
DEBUG_LOG_MSG = 0xf7,

	
BCAST_FILTER_CMD = 0xcf,
	
MCAST_FILTER_CMD = 0xd0,

	/* D3 commands/notifications */
	
D3_CONFIG_CMD = 0xd3,
	
PROT_OFFLOAD_CONFIG_CMD = 0xd4,
	
OFFLOADS_QUERY_CMD = 0xd5,
	
REMOTE_WAKE_CONFIG_CMD = 0xd6,
	
D0I3_END_CMD = 0xed,

	/* for WoWLAN in particular */
	
WOWLAN_PATTERNS = 0xe0,
	
WOWLAN_CONFIGURATION = 0xe1,
	
WOWLAN_TSC_RSC_PARAM = 0xe2,
	
WOWLAN_TKIP_PARAM = 0xe3,
	
WOWLAN_KEK_KCK_MATERIAL = 0xe4,
	
WOWLAN_GET_STATUSES = 0xe5,
	
WOWLAN_TX_POWER_PER_DB = 0xe6,

	/* and for NetDetect */
	
SCAN_OFFLOAD_PROFILES_QUERY_CMD = 0x56,
	
SCAN_OFFLOAD_HOTSPOTS_CONFIG_CMD = 0x58,
	
SCAN_OFFLOAD_HOTSPOTS_QUERY_CMD = 0x59,

	
REPLY_MAX = 0xff,
};

/* Please keep this enum *SORTED* by hex value.
 * Needed for binary search, otherwise a warning will be triggered.
 */

enum iwl_mac_conf_subcmd_ids {
	
LINK_QUALITY_MEASUREMENT_CMD = 0x1,
	
LINK_QUALITY_MEASUREMENT_COMPLETE_NOTIF = 0xFE,
	
CHANNEL_SWITCH_NOA_NOTIF = 0xFF,
};


enum iwl_phy_ops_subcmd_ids {
	
CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0,
	
CTDP_CONFIG_CMD = 0x03,
	
TEMP_REPORTING_THRESHOLDS_CMD = 0x04,
	
CT_KILL_NOTIFICATION = 0xFE,
	
DTS_MEASUREMENT_NOTIF_WIDE = 0xFF,
};


enum iwl_system_subcmd_ids {
	
SHARED_MEM_CFG_CMD = 0x0,
};


enum iwl_data_path_subcmd_ids {
	
DQA_ENABLE_CMD = 0x0,
	
UPDATE_MU_GROUPS_CMD = 0x1,
	
TRIGGER_RX_QUEUES_NOTIF_CMD = 0x2,
	
STA_PM_NOTIF = 0xFD,
	
MU_GROUP_MGMT_NOTIF = 0xFE,
	
RX_QUEUES_NOTIFICATION = 0xFF,
};


enum iwl_prot_offload_subcmd_ids {
	
STORED_BEACON_NTF = 0xFF,
};


enum iwl_regulatory_and_nvm_subcmd_ids {
	
NVM_ACCESS_COMPLETE = 0x0,
};


enum iwl_fmac_debug_cmds {
	
LMAC_RD_WR = 0x0,
	
UMAC_RD_WR = 0x1,
};

/* command groups */
enum {
	
LEGACY_GROUP = 0x0,
	
LONG_GROUP = 0x1,
	
SYSTEM_GROUP = 0x2,
	
MAC_CONF_GROUP = 0x3,
	
PHY_OPS_GROUP = 0x4,
	
DATA_PATH_GROUP = 0x5,
	
PROT_OFFLOAD_GROUP = 0xb,
	
REGULATORY_AND_NVM_GROUP = 0xc,
	
DEBUG_GROUP = 0xf,
};

/**
 * struct iwl_cmd_response - generic response struct for most commands
 * @status: status of the command asked, changes for each one
 */

struct iwl_cmd_response {
	
__le32 status;
};

/*
 * struct iwl_dqa_enable_cmd
 * @cmd_queue: the TXQ number of the command queue
 */

struct iwl_dqa_enable_cmd {
	
__le32 cmd_queue;
} 
__packed; 
/* DQA_CONTROL_CMD_API_S_VER_1 */

/*
 * struct iwl_tx_ant_cfg_cmd
 * @valid: valid antenna configuration
 */

struct iwl_tx_ant_cfg_cmd {
	
__le32 valid;
} 
__packed;

/*
 * Calibration control struct.
 * Sent as part of the phy configuration command.
 * @flow_trigger: bitmap for which calibrations to perform according to
 *              flow triggers.
 * @event_trigger: bitmap for which calibrations to perform according to
 *              event triggers.
 */

struct iwl_calib_ctrl {
	
__le32 flow_trigger;
	
__le32 event_trigger;
} 
__packed;

/* This enum defines the bitmap of various calibrations to enable in both
 * init ucode and runtime ucode through CALIBRATION_CFG_CMD.
 */

enum iwl_calib_cfg {
	
IWL_CALIB_CFG_XTAL_IDX			= BIT(0),
	
IWL_CALIB_CFG_TEMPERATURE_IDX		= BIT(1),
	
IWL_CALIB_CFG_VOLTAGE_READ_IDX		= BIT(2),
	
IWL_CALIB_CFG_PAPD_IDX			= BIT(3),
	
IWL_CALIB_CFG_TX_PWR_IDX		= BIT(4),
	
IWL_CALIB_CFG_DC_IDX			= BIT(5),
	
IWL_CALIB_CFG_BB_FILTER_IDX		= BIT(6),
	
IWL_CALIB_CFG_LO_LEAKAGE_IDX		= BIT(7),
	
IWL_CALIB_CFG_TX_IQ_IDX			= BIT(8),
	
IWL_CALIB_CFG_TX_IQ_SKEW_IDX		= BIT(9),
	
IWL_CALIB_CFG_RX_IQ_IDX			= BIT(10),
	
IWL_CALIB_CFG_RX_IQ_SKEW_IDX		= BIT(11),
	
IWL_CALIB_CFG_SENSITIVITY_IDX		= BIT(12),
	
IWL_CALIB_CFG_CHAIN_NOISE_IDX		= BIT(13),
	
IWL_CALIB_CFG_DISCONNECTED_ANT_IDX	= BIT(14),
	
IWL_CALIB_CFG_ANT_COUPLING_IDX		= BIT(15),
	
IWL_CALIB_CFG_DAC_IDX			= BIT(16),
	
IWL_CALIB_CFG_ABS_IDX			= BIT(17),
	
IWL_CALIB_CFG_AGC_IDX			= BIT(18),
};

/*
 * Phy configuration command.
 */

struct iwl_phy_cfg_cmd {
	
__le32	phy_cfg;
	
struct iwl_calib_ctrl calib_control;
} 
__packed;


#define PHY_CFG_RADIO_TYPE	(BIT(0) | BIT(1))

#define PHY_CFG_RADIO_STEP	(BIT(2) | BIT(3))

#define PHY_CFG_RADIO_DASH	(BIT(4) | BIT(5))

#define PHY_CFG_PRODUCT_NUMBER	(BIT(6) | BIT(7))

#define PHY_CFG_TX_CHAIN_A	BIT(8)

#define PHY_CFG_TX_CHAIN_B	BIT(9)

#define PHY_CFG_TX_CHAIN_C	BIT(10)

#define PHY_CFG_RX_CHAIN_A	BIT(12)

#define PHY_CFG_RX_CHAIN_B	BIT(13)

#define PHY_CFG_RX_CHAIN_C	BIT(14)


/* Target of the NVM_ACCESS_CMD */
enum {
	
NVM_ACCESS_TARGET_CACHE = 0,
	
NVM_ACCESS_TARGET_OTP = 1,
	
NVM_ACCESS_TARGET_EEPROM = 2,
};

/* Section types for NVM_ACCESS_CMD */
enum {
	
NVM_SECTION_TYPE_SW = 1,
	
NVM_SECTION_TYPE_REGULATORY = 3,
	
NVM_SECTION_TYPE_CALIBRATION = 4,
	
NVM_SECTION_TYPE_PRODUCTION = 5,
	
NVM_SECTION_TYPE_MAC_OVERRIDE = 11,
	
NVM_SECTION_TYPE_PHY_SKU = 12,
	
NVM_MAX_NUM_SECTIONS = 13,
};

/**
 * struct iwl_nvm_access_cmd_ver2 - Request the device to send an NVM section
 * @op_code: 0 - read, 1 - write
 * @target: NVM_ACCESS_TARGET_*
 * @type: NVM_SECTION_TYPE_*
 * @offset: offset in bytes into the section
 * @length: in bytes, to read/write
 * @data: if write operation, the data to write. On read its empty
 */

struct iwl_nvm_access_cmd {
	
u8 op_code;
	
u8 target;
	
__le16 type;
	
__le16 offset;
	
__le16 length;
	
u8 data[];
} 
__packed; 
/* NVM_ACCESS_CMD_API_S_VER_2 */


#define NUM_OF_FW_PAGING_BLOCKS	33 
/* 32 for data and 1 block for CSS */

/*
 * struct iwl_fw_paging_cmd - paging layout
 *
 * (FW_PAGING_BLOCK_CMD = 0x4f)
 *
 * Send to FW the paging layout in the driver.
 *
 * @flags: various flags for the command
 * @block_size: the block size in powers of 2
 * @block_num: number of blocks specified in the command.
 * @device_phy_addr: virtual addresses from device side
 *      32 bit address for API version 1, 64 bit address for API version 2.
*/

struct iwl_fw_paging_cmd {
	
__le32 flags;
	
__le32 block_size;
	
__le32 block_num;
	union {
		
__le32 addr32[NUM_OF_FW_PAGING_BLOCKS];
		
__le64 addr64[NUM_OF_FW_PAGING_BLOCKS];
	} 
device_phy_addr;
} 
__packed; 
/* FW_PAGING_BLOCK_CMD_API_S_VER_2 */

/*
 * Fw items ID's
 *
 * @IWL_FW_ITEM_ID_PAGING: Address of the pages that the FW will upload
 *      download
 */

enum iwl_fw_item_id {
	
IWL_FW_ITEM_ID_PAGING = 3,
};

/*
 * struct iwl_fw_get_item_cmd - get an item from the fw
 */

struct iwl_fw_get_item_cmd {
	
__le32 item_id;
} 
__packed; 
/* FW_GET_ITEM_CMD_API_S_VER_1 */


#define CONT_REC_COMMAND_SIZE	80

#define ENABLE_CONT_RECORDING	0x15

#define DISABLE_CONT_RECORDING	0x16

/*
 * struct iwl_continuous_record_mode - recording mode
 */

struct iwl_continuous_record_mode {
	
__le16 enable_recording;
} 
__packed;

/*
 * struct iwl_continuous_record_cmd - enable/disable continuous recording
 */

struct iwl_continuous_record_cmd {
	
struct iwl_continuous_record_mode record_mode;
	
u8 pad[CONT_REC_COMMAND_SIZE -
		sizeof(struct iwl_continuous_record_mode)];
} 
__packed;


struct iwl_fw_get_item_resp {
	
__le32 item_id;
	
__le32 item_byte_cnt;
	
__le32 item_val;
} 
__packed; 
/* FW_GET_ITEM_RSP_S_VER_1 */

/**
 * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD
 * @offset: offset in bytes into the section
 * @length: in bytes, either how much was written or read
 * @type: NVM_SECTION_TYPE_*
 * @status: 0 for success, fail otherwise
 * @data: if read operation, the data returned. Empty on write.
 */

struct iwl_nvm_access_resp {
	
__le16 offset;
	
__le16 length;
	
__le16 type;
	
__le16 status;
	
u8 data[];
} 
__packed; 
/* NVM_ACCESS_CMD_RESP_API_S_VER_2 */

/* MVM_ALIVE 0x1 */

/* alive response is_valid values */

#define ALIVE_RESP_UCODE_OK	BIT(0)

#define ALIVE_RESP_RFKILL	BIT(1)

/* alive response ver_type values */
enum {
	
FW_TYPE_HW = 0,
	
FW_TYPE_PROT = 1,
	
FW_TYPE_AP = 2,
	
FW_TYPE_WOWLAN = 3,
	
FW_TYPE_TIMING = 4,
	
FW_TYPE_WIPAN = 5
};

/* alive response ver_subtype values */
enum {
	
FW_SUBTYPE_FULL_FEATURE = 0,
	
FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */
	
FW_SUBTYPE_REDUCED = 2,
	
FW_SUBTYPE_ALIVE_ONLY = 3,
	
FW_SUBTYPE_WOWLAN = 4,
	
FW_SUBTYPE_AP_SUBTYPE = 5,
	
FW_SUBTYPE_WIPAN = 6,
	
FW_SUBTYPE_INITIALIZE = 9
};


#define IWL_ALIVE_STATUS_ERR 0xDEAD

#define IWL_ALIVE_STATUS_OK 0xCAFE


#define IWL_ALIVE_FLG_RFKILL	BIT(0)


struct iwl_lmac_alive {
	
__le32 ucode_minor;
	
__le32 ucode_major;
	
u8 ver_subtype;
	
u8 ver_type;
	
u8 mac;
	
u8 opt;
	
__le32 timestamp;
	
__le32 error_event_table_ptr;	/* SRAM address for error log */
	
__le32 log_event_table_ptr;	/* SRAM address for LMAC event log */
	
__le32 cpu_register_ptr;
	
__le32 dbgm_config_ptr;
	
__le32 alive_counter_ptr;
	
__le32 scd_base_ptr;		/* SRAM address for SCD */
	
__le32 st_fwrd_addr;		/* pointer to Store and forward */
	
__le32 st_fwrd_size;
} 
__packed; 
/* UCODE_ALIVE_NTFY_API_S_VER_3 */


struct iwl_umac_alive {
	
__le32 umac_minor;		/* UMAC version: minor */
	
__le32 umac_major;		/* UMAC version: major */
	
__le32 error_info_addr;		/* SRAM address for UMAC error log */
	
__le32 dbg_print_buff_addr;
} 
__packed; 
/* UMAC_ALIVE_DATA_API_S_VER_2 */


struct mvm_alive_resp_v3 {
	
__le16 status;
	
__le16 flags;
	
struct iwl_lmac_alive lmac_data;
	
struct iwl_umac_alive umac_data;
} 
__packed; 
/* ALIVE_RES_API_S_VER_3 */


struct mvm_alive_resp {
	
__le16 status;
	
__le16 flags;
	
struct iwl_lmac_alive lmac_data[2];
	
struct iwl_umac_alive umac_data;
} 
__packed; 
/* ALIVE_RES_API_S_VER_4 */

/* Error response/notification */
enum {
	
FW_ERR_UNKNOWN_CMD = 0x0,
	
FW_ERR_INVALID_CMD_PARAM = 0x1,
	
FW_ERR_SERVICE = 0x2,
	
FW_ERR_ARC_MEMORY = 0x3,
	
FW_ERR_ARC_CODE = 0x4,
	
FW_ERR_WATCH_DOG = 0x5,
	
FW_ERR_WEP_GRP_KEY_INDX = 0x10,
	
FW_ERR_WEP_KEY_SIZE = 0x11,
	
FW_ERR_OBSOLETE_FUNC = 0x12,
	
FW_ERR_UNEXPECTED = 0xFE,
	
FW_ERR_FATAL = 0xFF
};

/**
 * struct iwl_error_resp - FW error indication
 * ( REPLY_ERROR = 0x2 )
 * @error_type: one of FW_ERR_*
 * @cmd_id: the command ID for which the error occured
 * @bad_cmd_seq_num: sequence number of the erroneous command
 * @error_service: which service created the error, applicable only if
 *      error_type = 2, otherwise 0
 * @timestamp: TSF in usecs.
 */

struct iwl_error_resp {
	
__le32 error_type;
	
u8 cmd_id;
	
u8 reserved1;
	
__le16 bad_cmd_seq_num;
	
__le32 error_service;
	
__le64 timestamp;
} 
__packed;


/* Common PHY, MAC and Bindings definitions */


#define MAX_MACS_IN_BINDING	(3)

#define MAX_BINDINGS		(4)

#define AUX_BINDING_INDEX	(3)

/* Used to extract ID and color from the context dword */

#define FW_CTXT_ID_POS	  (0)

#define FW_CTXT_ID_MSK	  (0xff << FW_CTXT_ID_POS)

#define FW_CTXT_COLOR_POS (8)

#define FW_CTXT_COLOR_MSK (0xff << FW_CTXT_COLOR_POS)

#define FW_CTXT_INVALID	  (0xffffffff)


#define FW_CMD_ID_AND_COLOR(_id, _color) ((_id << FW_CTXT_ID_POS) |\
                                          (_color << FW_CTXT_COLOR_POS))

/* Possible actions on PHYs, MACs and Bindings */
enum {
	
FW_CTXT_ACTION_STUB = 0,
	
FW_CTXT_ACTION_ADD,
	
FW_CTXT_ACTION_MODIFY,
	
FW_CTXT_ACTION_REMOVE,
	
FW_CTXT_ACTION_NUM
}; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */

/* Time Events */

/* Time Event types, according to MAC type */

enum iwl_time_event_type {
	/* BSS Station Events */
	
TE_BSS_STA_AGGRESSIVE_ASSOC,
	
TE_BSS_STA_ASSOC,
	
TE_BSS_EAP_DHCP_PROT,
	
TE_BSS_QUIET_PERIOD,

	/* P2P Device Events */
	
TE_P2P_DEVICE_DISCOVERABLE,
	
TE_P2P_DEVICE_LISTEN,
	
TE_P2P_DEVICE_ACTION_SCAN,
	
TE_P2P_DEVICE_FULL_SCAN,

	/* P2P Client Events */
	
TE_P2P_CLIENT_AGGRESSIVE_ASSOC,
	
TE_P2P_CLIENT_ASSOC,
	
TE_P2P_CLIENT_QUIET_PERIOD,

	/* P2P GO Events */
	
TE_P2P_GO_ASSOC_PROT,
	
TE_P2P_GO_REPETITIVET_NOA,
	
TE_P2P_GO_CT_WINDOW,

	/* WiDi Sync Events */
	
TE_WIDI_TX_SYNC,

	/* Channel Switch NoA */
	
TE_CHANNEL_SWITCH_PERIOD,

	
TE_MAX
}; /* MAC_EVENT_TYPE_API_E_VER_1 */



/* Time event - defines for command API v1 */

/*
 * @TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed.
 * @TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only
 *      the first fragment is scheduled.
 * @TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only
 *      the first 2 fragments are scheduled.
 * @TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
 *      number of fragments are valid.
 *
 * Other than the constant defined above, specifying a fragmentation value 'x'
 * means that the event can be fragmented but only the first 'x' will be
 * scheduled.
 */
enum {
	
TE_V1_FRAG_NONE = 0,
	
TE_V1_FRAG_SINGLE = 1,
	
TE_V1_FRAG_DUAL = 2,
	
TE_V1_FRAG_ENDLESS = 0xffffffff
};

/* If a Time Event can be fragmented, this is the max number of fragments */

#define TE_V1_FRAG_MAX_MSK	0x0fffffff
/* Repeat the time event endlessly (until removed) */

#define TE_V1_REPEAT_ENDLESS	0xffffffff
/* If a Time Event has bounded repetitions, this is the maximal value */

#define TE_V1_REPEAT_MAX_MSK_V1	0x0fffffff

/* Time Event dependencies: none, on another TE, or in a specific time */
enum {
	
TE_V1_INDEPENDENT		= 0,
	
TE_V1_DEP_OTHER			= BIT(0),
	
TE_V1_DEP_TSF			= BIT(1),
	
TE_V1_EVENT_SOCIOPATHIC		= BIT(2),
}; /* MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */

/*
 * @TE_V1_NOTIF_NONE: no notifications
 * @TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start
 * @TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end
 * @TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use
 * @TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use.
 * @TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start
 * @TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end
 * @TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use.
 * @TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use.
 *
 * Supported Time event notifications configuration.
 * A notification (both event and fragment) includes a status indicating weather
 * the FW was able to schedule the event or not. For fragment start/end
 * notification the status is always success. There is no start/end fragment
 * notification for monolithic events.
 */
enum {
	
TE_V1_NOTIF_NONE = 0,
	
TE_V1_NOTIF_HOST_EVENT_START = BIT(0),
	
TE_V1_NOTIF_HOST_EVENT_END = BIT(1),
	
TE_V1_NOTIF_INTERNAL_EVENT_START = BIT(2),
	
TE_V1_NOTIF_INTERNAL_EVENT_END = BIT(3),
	
TE_V1_NOTIF_HOST_FRAG_START = BIT(4),
	
TE_V1_NOTIF_HOST_FRAG_END = BIT(5),
	
TE_V1_NOTIF_INTERNAL_FRAG_START = BIT(6),
	
TE_V1_NOTIF_INTERNAL_FRAG_END = BIT(7),
}; /* MAC_EVENT_ACTION_API_E_VER_2 */

/* Time event - defines for command API */

/*
 * @TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed.
 * @TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only
 *  the first fragment is scheduled.
 * @TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only
 *  the first 2 fragments are scheduled.
 * @TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
 *  number of fragments are valid.
 *
 * Other than the constant defined above, specifying a fragmentation value 'x'
 * means that the event can be fragmented but only the first 'x' will be
 * scheduled.
 */
enum {
	
TE_V2_FRAG_NONE = 0,
	
TE_V2_FRAG_SINGLE = 1,
	
TE_V2_FRAG_DUAL = 2,
	
TE_V2_FRAG_MAX = 0xfe,
	
TE_V2_FRAG_ENDLESS = 0xff
};

/* Repeat the time event endlessly (until removed) */

#define TE_V2_REPEAT_ENDLESS	0xff
/* If a Time Event has bounded repetitions, this is the maximal value */

#define TE_V2_REPEAT_MAX	0xfe


#define TE_V2_PLACEMENT_POS	12

#define TE_V2_ABSENCE_POS	15

/* Time event policy values
 * A notification (both event and fragment) includes a status indicating weather
 * the FW was able to schedule the event or not. For fragment start/end
 * notification the status is always success. There is no start/end fragment
 * notification for monolithic events.
 *
 * @TE_V2_DEFAULT_POLICY: independent, social, present, unoticable
 * @TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start
 * @TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end
 * @TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use
 * @TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use.
 * @TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start
 * @TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end
 * @TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use.
 * @TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use.
 * @TE_V2_DEP_OTHER: depends on another time event
 * @TE_V2_DEP_TSF: depends on a specific time
 * @TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC
 * @TE_V2_ABSENCE: are we present or absent during the Time Event.
 */
enum {
	
TE_V2_DEFAULT_POLICY = 0x0,

	/* notifications (event start/stop, fragment start/stop) */
	
TE_V2_NOTIF_HOST_EVENT_START = BIT(0),
	
TE_V2_NOTIF_HOST_EVENT_END = BIT(1),
	
TE_V2_NOTIF_INTERNAL_EVENT_START = BIT(2),
	
TE_V2_NOTIF_INTERNAL_EVENT_END = BIT(3),

	
TE_V2_NOTIF_HOST_FRAG_START = BIT(4),
	
TE_V2_NOTIF_HOST_FRAG_END = BIT(5),
	
TE_V2_NOTIF_INTERNAL_FRAG_START = BIT(6),
	
TE_V2_NOTIF_INTERNAL_FRAG_END = BIT(7),
	
T2_V2_START_IMMEDIATELY = BIT(11),

	
TE_V2_NOTIF_MSK = 0xff,

	/* placement characteristics */
	
TE_V2_DEP_OTHER = BIT(TE_V2_PLACEMENT_POS),
	
TE_V2_DEP_TSF = BIT(TE_V2_PLACEMENT_POS + 1),
	
TE_V2_EVENT_SOCIOPATHIC = BIT(TE_V2_PLACEMENT_POS + 2),

	/* are we present or absent during the Time Event. */
	
TE_V2_ABSENCE = BIT(TE_V2_ABSENCE_POS),
};

/**
 * struct iwl_time_event_cmd_api - configuring Time Events
 * with struct MAC_TIME_EVENT_DATA_API_S_VER_2 (see also
 * with version 1. determined by IWL_UCODE_TLV_FLAGS)
 * ( TIME_EVENT_CMD = 0x29 )
 * @id_and_color: ID and color of the relevant MAC
 * @action: action to perform, one of FW_CTXT_ACTION_*
 * @id: this field has two meanings, depending on the action:
 *      If the action is ADD, then it means the type of event to add.
 *      For all other actions it is the unique event ID assigned when the
 *      event was added by the FW.
 * @apply_time: When to start the Time Event (in GP2)
 * @max_delay: maximum delay to event's start (apply time), in TU
 * @depends_on: the unique ID of the event we depend on (if any)
 * @interval: interval between repetitions, in TU
 * @duration: duration of event in TU
 * @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS
 * @max_frags: maximal number of fragments the Time Event can be divided to
 * @policy: defines whether uCode shall notify the host or other uCode modules
 *      on event and/or fragment start and/or end
 *      using one of TE_INDEPENDENT, TE_DEP_OTHER, TE_DEP_TSF
 *      TE_EVENT_SOCIOPATHIC
 *      using TE_ABSENCE and using TE_NOTIF_*
 */

struct iwl_time_event_cmd {
	/* COMMON_INDEX_HDR_API_S_VER_1 */
	
__le32 id_and_color;
	
__le32 action;
	
__le32 id;
	/* MAC_TIME_EVENT_DATA_API_S_VER_2 */
	
__le32 apply_time;
	
__le32 max_delay;
	
__le32 depends_on;
	
__le32 interval;
	
__le32 duration;
	
u8 repeat;
	
u8 max_frags;
	
__le16 policy;
} 
__packed; 
/* MAC_TIME_EVENT_CMD_API_S_VER_2 */

/**
 * struct iwl_time_event_resp - response structure to iwl_time_event_cmd
 * @status: bit 0 indicates success, all others specify errors
 * @id: the Time Event type
 * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE
 * @id_and_color: ID and color of the relevant MAC
 */

struct iwl_time_event_resp {
	
__le32 status;
	
__le32 id;
	
__le32 unique_id;
	
__le32 id_and_color;
} 
__packed; 
/* MAC_TIME_EVENT_RSP_API_S_VER_1 */

/**
 * struct iwl_time_event_notif - notifications of time event start/stop
 * ( TIME_EVENT_NOTIFICATION = 0x2a )
 * @timestamp: action timestamp in GP2
 * @session_id: session's unique id
 * @unique_id: unique id of the Time Event itself
 * @id_and_color: ID and color of the relevant MAC
 * @action: one of TE_NOTIF_START or TE_NOTIF_END
 * @status: true if scheduled, false otherwise (not executed)
 */

struct iwl_time_event_notif {
	
__le32 timestamp;
	
__le32 session_id;
	
__le32 unique_id;
	
__le32 id_and_color;
	
__le32 action;
	
__le32 status;
} 
__packed; 
/* MAC_TIME_EVENT_NTFY_API_S_VER_1 */


/* Bindings and Time Quota */

/**
 * struct iwl_binding_cmd - configuring bindings
 * ( BINDING_CONTEXT_CMD = 0x2b )
 * @id_and_color: ID and color of the relevant Binding
 * @action: action to perform, one of FW_CTXT_ACTION_*
 * @macs: array of MAC id and colors which belong to the binding
 * @phy: PHY id and color which belongs to the binding
 */

struct iwl_binding_cmd {
	/* COMMON_INDEX_HDR_API_S_VER_1 */
	
__le32 id_and_color;
	
__le32 action;
	/* BINDING_DATA_API_S_VER_1 */
	
__le32 macs[MAX_MACS_IN_BINDING];
	
__le32 phy;
} 
__packed; 
/* BINDING_CMD_API_S_VER_1 */

/* The maximal number of fragments in the FW's schedule session */

#define IWL_MVM_MAX_QUOTA 128

/**
 * struct iwl_time_quota_data - configuration of time quota per binding
 * @id_and_color: ID and color of the relevant Binding
 * @quota: absolute time quota in TU. The scheduler will try to divide the
 *      remainig quota (after Time Events) according to this quota.
 * @max_duration: max uninterrupted context duration in TU
 */

struct iwl_time_quota_data {
	
__le32 id_and_color;
	
__le32 quota;
	
__le32 max_duration;
} 
__packed; 
/* TIME_QUOTA_DATA_API_S_VER_1 */

/**
 * struct iwl_time_quota_cmd - configuration of time quota between bindings
 * ( TIME_QUOTA_CMD = 0x2c )
 * @quotas: allocations per binding
 */

struct iwl_time_quota_cmd {
	
struct iwl_time_quota_data quotas[MAX_BINDINGS];
} 
__packed; 
/* TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */


/* PHY context */

/* Supported bands */

#define PHY_BAND_5  (0)

#define PHY_BAND_24 (1)

/* Supported channel width, vary if there is VHT support */

#define PHY_VHT_CHANNEL_MODE20	(0x0)

#define PHY_VHT_CHANNEL_MODE40	(0x1)

#define PHY_VHT_CHANNEL_MODE80	(0x2)

#define PHY_VHT_CHANNEL_MODE160	(0x3)

/*
 * Control channel position:
 * For legacy set bit means upper channel, otherwise lower.
 * For VHT - bit-2 marks if the control is lower/upper relative to center-freq
 *   bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0.
 *                                   center_freq
 *                                        |
 * 40Mhz                          |_______|_______|
 * 80Mhz                  |_______|_______|_______|_______|
 * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______|
 * code      011     010     001     000  |  100     101     110    111
 */

#define PHY_VHT_CTRL_POS_1_BELOW  (0x0)

#define PHY_VHT_CTRL_POS_2_BELOW  (0x1)

#define PHY_VHT_CTRL_POS_3_BELOW  (0x2)

#define PHY_VHT_CTRL_POS_4_BELOW  (0x3)

#define PHY_VHT_CTRL_POS_1_ABOVE  (0x4)

#define PHY_VHT_CTRL_POS_2_ABOVE  (0x5)

#define PHY_VHT_CTRL_POS_3_ABOVE  (0x6)

#define PHY_VHT_CTRL_POS_4_ABOVE  (0x7)

/*
 * @band: PHY_BAND_*
 * @channel: channel number
 * @width: PHY_[VHT|LEGACY]_CHANNEL_*
 * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
 */

struct iwl_fw_channel_info {
	
u8 band;
	
u8 channel;
	
u8 width;
	
u8 ctrl_pos;
} 
__packed;


#define PHY_RX_CHAIN_DRIVER_FORCE_POS	(0)

#define PHY_RX_CHAIN_DRIVER_FORCE_MSK \
	(0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS)

#define PHY_RX_CHAIN_VALID_POS		(1)

#define PHY_RX_CHAIN_VALID_MSK \
	(0x7 << PHY_RX_CHAIN_VALID_POS)

#define PHY_RX_CHAIN_FORCE_SEL_POS	(4)

#define PHY_RX_CHAIN_FORCE_SEL_MSK \
	(0x7 << PHY_RX_CHAIN_FORCE_SEL_POS)

#define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS	(7)

#define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \
	(0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS)

#define PHY_RX_CHAIN_CNT_POS		(10)

#define PHY_RX_CHAIN_CNT_MSK \
	(0x3 << PHY_RX_CHAIN_CNT_POS)

#define PHY_RX_CHAIN_MIMO_CNT_POS	(12)

#define PHY_RX_CHAIN_MIMO_CNT_MSK \
	(0x3 << PHY_RX_CHAIN_MIMO_CNT_POS)

#define PHY_RX_CHAIN_MIMO_FORCE_POS	(14)

#define PHY_RX_CHAIN_MIMO_FORCE_MSK \
	(0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS)

/* TODO: fix the value, make it depend on firmware at runtime? */

#define NUM_PHY_CTX	3

/* TODO: complete missing documentation */
/**
 * struct iwl_phy_context_cmd - config of the PHY context
 * ( PHY_CONTEXT_CMD = 0x8 )
 * @id_and_color: ID and color of the relevant Binding
 * @action: action to perform, one of FW_CTXT_ACTION_*
 * @apply_time: 0 means immediate apply and context switch.
 *      other value means apply new params after X usecs
 * @tx_param_color: ???
 * @channel_info:
 * @txchain_info: ???
 * @rxchain_info: ???
 * @acquisition_data: ???
 * @dsp_cfg_flags: set to 0
 */

struct iwl_phy_context_cmd {
	/* COMMON_INDEX_HDR_API_S_VER_1 */
	
__le32 id_and_color;
	
__le32 action;
	/* PHY_CONTEXT_DATA_API_S_VER_1 */
	
__le32 apply_time;
	
__le32 tx_param_color;
	
struct iwl_fw_channel_info ci;
	
__le32 txchain_info;
	
__le32 rxchain_info;
	
__le32 acquisition_data;
	
__le32 dsp_cfg_flags;
} 
__packed; 
/* PHY_CONTEXT_CMD_API_VER_1 */

/*
 * Aux ROC command
 *
 * Command requests the firmware to create a time event for a certain duration
 * and remain on the given channel. This is done by using the Aux framework in
 * the FW.
 * The command was first used for Hot Spot issues - but can be used regardless
 * to Hot Spot.
 *
 * ( HOT_SPOT_CMD 0x53 )
 *
 * @id_and_color: ID and color of the MAC
 * @action: action to perform, one of FW_CTXT_ACTION_*
 * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the
 *      event_unique_id should be the id of the time event assigned by ucode.
 *      Otherwise ignore the event_unique_id.
 * @sta_id_and_color: station id and color, resumed during "Remain On Channel"
 *      activity.
 * @channel_info: channel info
 * @node_addr: Our MAC Address
 * @reserved: reserved for alignment
 * @apply_time: GP2 value to start (should always be the current GP2 value)
 * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max
 *      time by which start of the event is allowed to be postponed.
 * @duration: event duration in TU To calculate event duration:
 *      timeEventDuration = min(duration, remainingQuota)
 */

struct iwl_hs20_roc_req {
	/* COMMON_INDEX_HDR_API_S_VER_1 hdr */
	
__le32 id_and_color;
	
__le32 action;
	
__le32 event_unique_id;
	
__le32 sta_id_and_color;
	
struct iwl_fw_channel_info channel_info;
	
u8 node_addr[ETH_ALEN];
	
__le16 reserved;
	
__le32 apply_time;
	
__le32 apply_time_max_delay;
	
__le32 duration;
} 
__packed; 
/* HOT_SPOT_CMD_API_S_VER_1 */

/*
 * values for AUX ROC result values
 */

enum iwl_mvm_hot_spot {
	
HOT_SPOT_RSP_STATUS_OK,
	
HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS,
	
HOT_SPOT_MAX_NUM_OF_SESSIONS,
};

/*
 * Aux ROC command response
 *
 * In response to iwl_hs20_roc_req the FW sends this command to notify the
 * driver the uid of the timevent.
 *
 * ( HOT_SPOT_CMD 0x53 )
 *
 * @event_unique_id: Unique ID of time event assigned by ucode
 * @status: Return status 0 is success, all the rest used for specific errors
 */

struct iwl_hs20_roc_res {
	
__le32 event_unique_id;
	
__le32 status;
} 
__packed; 
/* HOT_SPOT_RSP_API_S_VER_1 */

/**
 * struct iwl_radio_version_notif - information on the radio version
 * ( RADIO_VERSION_NOTIFICATION = 0x68 )
 * @radio_flavor:
 * @radio_step:
 * @radio_dash:
 */

struct iwl_radio_version_notif {
	
__le32 radio_flavor;
	
__le32 radio_step;
	
__le32 radio_dash;
} 
__packed; 
/* RADIO_VERSION_NOTOFICATION_S_VER_1 */


enum iwl_card_state_flags {
	
CARD_ENABLED		= 0x00,
	
HW_CARD_DISABLED	= 0x01,
	
SW_CARD_DISABLED	= 0x02,
	
CT_KILL_CARD_DISABLED	= 0x04,
	
HALT_CARD_DISABLED	= 0x08,
	
CARD_DISABLED_MSK	= 0x0f,
	
CARD_IS_RX_ON		= 0x10,
};

/**
 * struct iwl_radio_version_notif - information on the radio version
 * ( CARD_STATE_NOTIFICATION = 0xa1 )
 * @flags: %iwl_card_state_flags
 */

struct iwl_card_state_notif {
	
__le32 flags;
} 
__packed; 
/* CARD_STATE_NTFY_API_S_VER_1 */

/**
 * struct iwl_missed_beacons_notif - information on missed beacons
 * ( MISSED_BEACONS_NOTIFICATION = 0xa2 )
 * @mac_id: interface ID
 * @consec_missed_beacons_since_last_rx: number of consecutive missed
 *      beacons since last RX.
 * @consec_missed_beacons: number of consecutive missed beacons
 * @num_expected_beacons:
 * @num_recvd_beacons:
 */

struct iwl_missed_beacons_notif {
	
__le32 mac_id;
	
__le32 consec_missed_beacons_since_last_rx;
	
__le32 consec_missed_beacons;
	
__le32 num_expected_beacons;
	
__le32 num_recvd_beacons;
} 
__packed; 
/* MISSED_BEACON_NTFY_API_S_VER_3 */

/**
 * struct iwl_mfuart_load_notif - mfuart image version & status
 * ( MFUART_LOAD_NOTIFICATION = 0xb1 )
 * @installed_ver: installed image version
 * @external_ver: external image version
 * @status: MFUART loading status
 * @duration: MFUART loading time
 * @image_size: MFUART image size in bytes
*/

struct iwl_mfuart_load_notif {
	
__le32 installed_ver;
	
__le32 external_ver;
	
__le32 status;
	
__le32 duration;
	/* image size valid only in v2 of the command */
	
__le32 image_size;
} 
__packed; 
/*MFU_LOADER_NTFY_API_S_VER_2*/

/**
 * struct iwl_set_calib_default_cmd - set default value for calibration.
 * ( SET_CALIB_DEFAULT_CMD = 0x8e )
 * @calib_index: the calibration to set value for
 * @length: of data
 * @data: the value to set for the calibration result
 */

struct iwl_set_calib_default_cmd {
	
__le16 calib_index;
	
__le16 length;
	
u8 data[0];
} 
__packed; 
/* PHY_CALIB_OVERRIDE_VALUES_S */


#define MAX_PORT_ID_NUM	2

#define MAX_MCAST_FILTERING_ADDRESSES 256

/**
 * struct iwl_mcast_filter_cmd - configure multicast filter.
 * @filter_own: Set 1 to filter out multicast packets sent by station itself
 * @port_id:    Multicast MAC addresses array specifier. This is a strange way
 *              to identify network interface adopted in host-device IF.
 *              It is used by FW as index in array of addresses. This array has
 *              MAX_PORT_ID_NUM members.
 * @count:      Number of MAC addresses in the array
 * @pass_all:   Set 1 to pass all multicast packets.
 * @bssid:      current association BSSID.
 * @addr_list:  Place holder for array of MAC addresses.
 *              IMPORTANT: add padding if necessary to ensure DWORD alignment.
 */

struct iwl_mcast_filter_cmd {
	
u8 filter_own;
	
u8 port_id;
	
u8 count;
	
u8 pass_all;
	
u8 bssid[6];
	
u8 reserved[2];
	
u8 addr_list[0];
} 
__packed; 
/* MCAST_FILTERING_CMD_API_S_VER_1 */


#define MAX_BCAST_FILTERS 8

#define MAX_BCAST_FILTER_ATTRS 2

/**
 * enum iwl_mvm_bcast_filter_attr_offset - written by fw for each Rx packet
 * @BCAST_FILTER_OFFSET_PAYLOAD_START: offset is from payload start.
 * @BCAST_FILTER_OFFSET_IP_END: offset is from ip header end (i.e.
 *      start of ip payload).
 */

enum iwl_mvm_bcast_filter_attr_offset {
	
BCAST_FILTER_OFFSET_PAYLOAD_START = 0,
	
BCAST_FILTER_OFFSET_IP_END = 1,
};

/**
 * struct iwl_fw_bcast_filter_attr - broadcast filter attribute
 * @offset_type:        &enum iwl_mvm_bcast_filter_attr_offset.
 * @offset:     starting offset of this pattern.
 * @val:                value to match - big endian (MSB is the first
 *              byte to match from offset pos).
 * @mask:       mask to match (big endian).
 */

struct iwl_fw_bcast_filter_attr {
	
u8 offset_type;
	
u8 offset;
	
__le16 reserved1;
	
__be32 val;
	
__be32 mask;
} 
__packed; 
/* BCAST_FILTER_ATT_S_VER_1 */

/**
 * enum iwl_mvm_bcast_filter_frame_type - filter frame type
 * @BCAST_FILTER_FRAME_TYPE_ALL: consider all frames.
 * @BCAST_FILTER_FRAME_TYPE_IPV4: consider only ipv4 frames
 */

enum iwl_mvm_bcast_filter_frame_type {
	
BCAST_FILTER_FRAME_TYPE_ALL = 0,
	
BCAST_FILTER_FRAME_TYPE_IPV4 = 1,
};

/**
 * struct iwl_fw_bcast_filter - broadcast filter
 * @discard: discard frame (1) or let it pass (0).
 * @frame_type: &enum iwl_mvm_bcast_filter_frame_type.
 * @num_attrs: number of valid attributes in this filter.
 * @attrs: attributes of this filter. a filter is considered matched
 *      only when all its attributes are matched (i.e. AND relationship)
 */

struct iwl_fw_bcast_filter {
	
u8 discard;
	
u8 frame_type;
	
u8 num_attrs;
	
u8 reserved1;
	
struct iwl_fw_bcast_filter_attr attrs[MAX_BCAST_FILTER_ATTRS];
} 
__packed; 
/* BCAST_FILTER_S_VER_1 */


#define BA_WINDOW_STREAMS_MAX		16

#define BA_WINDOW_STATUS_TID_MSK	0x000F

#define BA_WINDOW_STATUS_STA_ID_POS	4

#define BA_WINDOW_STATUS_STA_ID_MSK	0x01F0

#define BA_WINDOW_STATUS_VALID_MSK	BIT(9)

/**
 * struct iwl_ba_window_status_notif - reordering window's status notification
 * @bitmap: bitmap of received frames [start_seq_num + 0]..[start_seq_num + 63]
 * @ra_tid: bit 3:0 - TID, bit 8:4 - STA_ID, bit 9 - valid
 * @start_seq_num: the start sequence number of the bitmap
 * @mpdu_rx_count: the number of received MPDUs since entering D0i3
 */

struct iwl_ba_window_status_notif {
	
__le64 bitmap[BA_WINDOW_STREAMS_MAX];
	
__le16 ra_tid[BA_WINDOW_STREAMS_MAX];
	
__le32 start_seq_num[BA_WINDOW_STREAMS_MAX];
	
__le16 mpdu_rx_count[BA_WINDOW_STREAMS_MAX];
} 
__packed; 
/* BA_WINDOW_STATUS_NTFY_API_S_VER_1 */

/**
 * struct iwl_fw_bcast_mac - per-mac broadcast filtering configuration.
 * @default_discard: default action for this mac (discard (1) / pass (0)).
 * @attached_filters: bitmap of relevant filters for this mac.
 */

struct iwl_fw_bcast_mac {
	
u8 default_discard;
	
u8 reserved1;
	
__le16 attached_filters;
} 
__packed; 
/* BCAST_MAC_CONTEXT_S_VER_1 */

/**
 * struct iwl_bcast_filter_cmd - broadcast filtering configuration
 * @disable: enable (0) / disable (1)
 * @max_bcast_filters: max number of filters (MAX_BCAST_FILTERS)
 * @max_macs: max number of macs (NUM_MAC_INDEX_DRIVER)
 * @filters: broadcast filters
 * @macs: broadcast filtering configuration per-mac
 */

struct iwl_bcast_filter_cmd {
	
u8 disable;
	
u8 max_bcast_filters;
	
u8 max_macs;
	
u8 reserved1;
	
struct iwl_fw_bcast_filter filters[MAX_BCAST_FILTERS];
	
struct iwl_fw_bcast_mac macs[NUM_MAC_INDEX_DRIVER];
} 
__packed; 
/* BCAST_FILTERING_HCMD_API_S_VER_1 */

/*
 * enum iwl_mvm_marker_id - maker ids
 *
 * The ids for different type of markers to insert into the usniffer logs
 */

enum iwl_mvm_marker_id {
	
MARKER_ID_TX_FRAME_LATENCY = 1,
}; /* MARKER_ID_API_E_VER_1 */

/**
 * struct iwl_mvm_marker - mark info into the usniffer logs
 *
 * (MARKER_CMD = 0xcb)
 *
 * Mark the UTC time stamp into the usniffer logs together with additional
 * metadata, so the usniffer output can be parsed.
 * In the command response the ucode will return the GP2 time.
 *
 * @dw_len: The amount of dwords following this byte including this byte.
 * @marker_id: A unique marker id (iwl_mvm_marker_id).
 * @reserved: reserved.
 * @timestamp: in milliseconds since 1970-01-01 00:00:00 UTC
 * @metadata: additional meta data that will be written to the unsiffer log
 */

struct iwl_mvm_marker {
	
u8 dwLen;
	
u8 markerId;
	
__le16 reserved;
	
__le64 timestamp;
	
__le32 metadata[0];
} 
__packed; 
/* MARKER_API_S_VER_1 */

/*
 * enum iwl_dc2dc_config_id - flag ids
 *
 * Ids of dc2dc configuration flags
 */

enum iwl_dc2dc_config_id {
	
DCDC_LOW_POWER_MODE_MSK_SET  = 0x1, /* not used */
	
DCDC_FREQ_TUNE_SET = 0x2,
}; /* MARKER_ID_API_E_VER_1 */

/**
 * struct iwl_dc2dc_config_cmd - configure dc2dc values
 *
 * (DC2DC_CONFIG_CMD = 0x83)
 *
 * Set/Get & configure dc2dc values.
 * The command always returns the current dc2dc values.
 *
 * @flags: set/get dc2dc
 * @enable_low_power_mode: not used.
 * @dc2dc_freq_tune0: frequency divider - digital domain
 * @dc2dc_freq_tune1: frequency divider - analog domain
 */

struct iwl_dc2dc_config_cmd {
	
__le32 flags;
	
__le32 enable_low_power_mode; /* not used */
	
__le32 dc2dc_freq_tune0;
	
__le32 dc2dc_freq_tune1;
} 
__packed; 
/* DC2DC_CONFIG_CMD_API_S_VER_1 */

/**
 * struct iwl_dc2dc_config_resp - response for iwl_dc2dc_config_cmd
 *
 * Current dc2dc values returned by the FW.
 *
 * @dc2dc_freq_tune0: frequency divider - digital domain
 * @dc2dc_freq_tune1: frequency divider - analog domain
 */

struct iwl_dc2dc_config_resp {
	
__le32 dc2dc_freq_tune0;
	
__le32 dc2dc_freq_tune1;
} 
__packed; 
/* DC2DC_CONFIG_RESP_API_S_VER_1 */

/***********************************
 * Smart Fifo API
 ***********************************/
/* Smart Fifo state */

enum iwl_sf_state {
	
SF_LONG_DELAY_ON = 0, /* should never be called by driver */
	
SF_FULL_ON,
	
SF_UNINIT,
	
SF_INIT_OFF,
	
SF_HW_NUM_STATES
};

/* Smart Fifo possible scenario */

enum iwl_sf_scenario {
	
SF_SCENARIO_SINGLE_UNICAST,
	
SF_SCENARIO_AGG_UNICAST,
	
SF_SCENARIO_MULTICAST,
	
SF_SCENARIO_BA_RESP,
	
SF_SCENARIO_TX_RESP,
	
SF_NUM_SCENARIO
};


#define SF_TRANSIENT_STATES_NUMBER 2	
/* SF_LONG_DELAY_ON and SF_FULL_ON */

#define SF_NUM_TIMEOUT_TYPES 2		
/* Aging timer and Idle timer */

/* smart FIFO default values */

#define SF_W_MARK_SISO 6144

#define SF_W_MARK_MIMO2 8192

#define SF_W_MARK_MIMO3 6144

#define SF_W_MARK_LEGACY 4096

#define SF_W_MARK_SCAN 4096

/* SF Scenarios timers for default configuration (aligned to 32 uSec) */

#define SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160	
/* 150 uSec  */

#define SF_SINGLE_UNICAST_AGING_TIMER_DEF 400	
/* 0.4 mSec */

#define SF_AGG_UNICAST_IDLE_TIMER_DEF 160		
/* 150 uSec */

#define SF_AGG_UNICAST_AGING_TIMER_DEF 400		
/* 0.4 mSec */

#define SF_MCAST_IDLE_TIMER_DEF 160		
/* 150 mSec */

#define SF_MCAST_AGING_TIMER_DEF 400		
/* 0.4 mSec */

#define SF_BA_IDLE_TIMER_DEF 160			
/* 150 uSec */

#define SF_BA_AGING_TIMER_DEF 400			
/* 0.4 mSec */

#define SF_TX_RE_IDLE_TIMER_DEF 160			
/* 150 uSec */

#define SF_TX_RE_AGING_TIMER_DEF 400		
/* 0.4 mSec */

/* SF Scenarios timers for BSS MAC configuration (aligned to 32 uSec) */

#define SF_SINGLE_UNICAST_IDLE_TIMER 320	
/* 300 uSec  */

#define SF_SINGLE_UNICAST_AGING_TIMER 2016	
/* 2 mSec */

#define SF_AGG_UNICAST_IDLE_TIMER 320		
/* 300 uSec */

#define SF_AGG_UNICAST_AGING_TIMER 2016		
/* 2 mSec */

#define SF_MCAST_IDLE_TIMER 2016		
/* 2 mSec */

#define SF_MCAST_AGING_TIMER 10016		
/* 10 mSec */

#define SF_BA_IDLE_TIMER 320			
/* 300 uSec */

#define SF_BA_AGING_TIMER 2016			
/* 2 mSec */

#define SF_TX_RE_IDLE_TIMER 320			
/* 300 uSec */

#define SF_TX_RE_AGING_TIMER 2016		
/* 2 mSec */


#define SF_LONG_DELAY_AGING_TIMER 1000000	
/* 1 Sec */


#define SF_CFG_DUMMY_NOTIF_OFF	BIT(16)

/**
 * Smart Fifo configuration command.
 * @state: smart fifo state, types listed in enum %iwl_sf_sate.
 * @watermark: Minimum allowed availabe free space in RXF for transient state.
 * @long_delay_timeouts: aging and idle timer values for each scenario
 * in long delay state.
 * @full_on_timeouts: timer values for each scenario in full on state.
 */

struct iwl_sf_cfg_cmd {
	
__le32 state;
	
__le32 watermark[SF_TRANSIENT_STATES_NUMBER];
	
__le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
	
__le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
} 
__packed; 
/* SF_CFG_API_S_VER_2 */

/***********************************
 * Location Aware Regulatory (LAR) API - MCC updates
 ***********************************/

/**
 * struct iwl_mcc_update_cmd_v1 - Request the device to update geographic
 * regulatory profile according to the given MCC (Mobile Country Code).
 * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
 * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
 * MCC in the cmd response will be the relevant MCC in the NVM.
 * @mcc: given mobile country code
 * @source_id: the source from where we got the MCC, see iwl_mcc_source
 * @reserved: reserved for alignment
 */

struct iwl_mcc_update_cmd_v1 {
	
__le16 mcc;
	
u8 source_id;
	
u8 reserved;
} 
__packed; 
/* LAR_UPDATE_MCC_CMD_API_S_VER_1 */

/**
 * struct iwl_mcc_update_cmd - Request the device to update geographic
 * regulatory profile according to the given MCC (Mobile Country Code).
 * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
 * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
 * MCC in the cmd response will be the relevant MCC in the NVM.
 * @mcc: given mobile country code
 * @source_id: the source from where we got the MCC, see iwl_mcc_source
 * @reserved: reserved for alignment
 * @key: integrity key for MCC API OEM testing
 * @reserved2: reserved
 */

struct iwl_mcc_update_cmd {
	
__le16 mcc;
	
u8 source_id;
	
u8 reserved;
	
__le32 key;
	
__le32 reserved2[5];
} 
__packed; 
/* LAR_UPDATE_MCC_CMD_API_S_VER_2 */

/**
 * iwl_mcc_update_resp_v1  - response to MCC_UPDATE_CMD.
 * Contains the new channel control profile map, if changed, and the new MCC
 * (mobile country code).
 * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
 * @status: see &enum iwl_mcc_update_status
 * @mcc: the new applied MCC
 * @cap: capabilities for all channels which matches the MCC
 * @source_id: the MCC source, see iwl_mcc_source
 * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
 *              channels, depending on platform)
 * @channels: channel control data map, DWORD for each channel. Only the first
 *      16bits are used.
 */

struct iwl_mcc_update_resp_v1  {
	
__le32 status;
	
__le16 mcc;
	
u8 cap;
	
u8 source_id;
	
__le32 n_channels;
	
__le32 channels[0];
} 
__packed; 
/* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */

/**
 * iwl_mcc_update_resp - response to MCC_UPDATE_CMD.
 * Contains the new channel control profile map, if changed, and the new MCC
 * (mobile country code).
 * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
 * @status: see &enum iwl_mcc_update_status
 * @mcc: the new applied MCC
 * @cap: capabilities for all channels which matches the MCC
 * @source_id: the MCC source, see iwl_mcc_source
 * @time: time elapsed from the MCC test start (in 30 seconds TU)
 * @reserved: reserved.
 * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
 *              channels, depending on platform)
 * @channels: channel control data map, DWORD for each channel. Only the first
 *      16bits are used.
 */

struct iwl_mcc_update_resp {
	
__le32 status;
	
__le16 mcc;
	
u8 cap;
	
u8 source_id;
	
__le16 time;
	
__le16 reserved;
	
__le32 n_channels;
	
__le32 channels[0];
} 
__packed; 
/* LAR_UPDATE_MCC_CMD_RESP_S_VER_2 */

/**
 * struct iwl_mcc_chub_notif - chub notifies of mcc change
 * (MCC_CHUB_UPDATE_CMD = 0xc9)
 * The Chub (Communication Hub, CommsHUB) is a HW component that connects to
 * the cellular and connectivity cores that gets updates of the mcc, and
 * notifies the ucode directly of any mcc change.
 * The ucode requests the driver to request the device to update geographic
 * regulatory  profile according to the given MCC (Mobile Country Code).
 * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
 * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
 * MCC in the cmd response will be the relevant MCC in the NVM.
 * @mcc: given mobile country code
 * @source_id: identity of the change originator, see iwl_mcc_source
 * @reserved1: reserved for alignment
 */

struct iwl_mcc_chub_notif {
	
u16 mcc;
	
u8 source_id;
	
u8 reserved1;
} 
__packed; 
/* LAR_MCC_NOTIFY_S */


enum iwl_mcc_update_status {
	
MCC_RESP_NEW_CHAN_PROFILE,
	
MCC_RESP_SAME_CHAN_PROFILE,
	
MCC_RESP_INVALID,
	
MCC_RESP_NVM_DISABLED,
	
MCC_RESP_ILLEGAL,
	
MCC_RESP_LOW_PRIORITY,
	
MCC_RESP_TEST_MODE_ACTIVE,
	
MCC_RESP_TEST_MODE_NOT_ACTIVE,
	
MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE,
};


enum iwl_mcc_source {
	
MCC_SOURCE_OLD_FW = 0,
	
MCC_SOURCE_ME = 1,
	
MCC_SOURCE_BIOS = 2,
	
MCC_SOURCE_3G_LTE_HOST = 3,
	
MCC_SOURCE_3G_LTE_DEVICE = 4,
	
MCC_SOURCE_WIFI = 5,
	
MCC_SOURCE_RESERVED = 6,
	
MCC_SOURCE_DEFAULT = 7,
	
MCC_SOURCE_UNINITIALIZED = 8,
	
MCC_SOURCE_MCC_API = 9,
	
MCC_SOURCE_GET_CURRENT = 0x10,
	
MCC_SOURCE_GETTING_MCC_TEST_MODE = 0x11,
};

/* DTS measurements */


enum iwl_dts_measurement_flags {
	
DTS_TRIGGER_CMD_FLAGS_TEMP	= BIT(0),
	
DTS_TRIGGER_CMD_FLAGS_VOLT	= BIT(1),
};

/**
 * iwl_dts_measurement_cmd - request DTS temperature and/or voltage measurements
 *
 * @flags: indicates which measurements we want as specified in &enum
 *         iwl_dts_measurement_flags
 */

struct iwl_dts_measurement_cmd {
	
__le32 flags;
} 
__packed; 
/* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */

/**
* enum iwl_dts_control_measurement_mode - DTS measurement type
* @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read
*                 back (latest value. Not waiting for new value). Use automatic
*                 SW DTS configuration.
* @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings,
*                    trigger DTS reading and provide read back temperature read
*                    when available.
* @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read
* @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result,
*                              without measurement trigger.
*/

enum iwl_dts_control_measurement_mode {
	
DTS_AUTOMATIC			= 0,
	
DTS_REQUEST_READ		= 1,
	
DTS_OVER_WRITE			= 2,
	
DTS_DIRECT_WITHOUT_MEASURE	= 3,
};

/**
* enum iwl_dts_used - DTS to use or used for measurement in the DTS request
* @DTS_USE_TOP: Top
* @DTS_USE_CHAIN_A: chain A
* @DTS_USE_CHAIN_B: chain B
* @DTS_USE_CHAIN_C: chain C
* @XTAL_TEMPERATURE - read temperature from xtal
*/

enum iwl_dts_used {
	
DTS_USE_TOP		= 0,
	
DTS_USE_CHAIN_A		= 1,
	
DTS_USE_CHAIN_B		= 2,
	
DTS_USE_CHAIN_C		= 3,
	
XTAL_TEMPERATURE	= 4,
};

/**
* enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode
* @DTS_BIT6_MODE: bit 6 mode
* @DTS_BIT8_MODE: bit 8 mode
*/

enum iwl_dts_bit_mode {
	
DTS_BIT6_MODE	= 0,
	
DTS_BIT8_MODE	= 1,
};

/**
 * iwl_ext_dts_measurement_cmd - request extended DTS temperature measurements
 * @control_mode: see &enum iwl_dts_control_measurement_mode
 * @temperature: used when over write DTS mode is selected
 * @sensor: set temperature sensor to use. See &enum iwl_dts_used
 * @avg_factor: average factor to DTS in request DTS read mode
 * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode
 * @step_duration: step duration for the DTS
 */

struct iwl_ext_dts_measurement_cmd {
	
__le32 control_mode;
	
__le32 temperature;
	
__le32 sensor;
	
__le32 avg_factor;
	
__le32 bit_mode;
	
__le32 step_duration;
} 
__packed; 
/* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */

/**
 * struct iwl_dts_measurement_notif_v1 - measurements notification
 *
 * @temp: the measured temperature
 * @voltage: the measured voltage
 */

struct iwl_dts_measurement_notif_v1 {
	
__le32 temp;
	
__le32 voltage;
} 
__packed; 
/* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/

/**
 * struct iwl_dts_measurement_notif_v2 - measurements notification
 *
 * @temp: the measured temperature
 * @voltage: the measured voltage
 * @threshold_idx: the trip index that was crossed
 */

struct iwl_dts_measurement_notif_v2 {
	
__le32 temp;
	
__le32 voltage;
	
__le32 threshold_idx;
} 
__packed; 
/* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */

/**
 * struct ct_kill_notif - CT-kill entry notification
 *
 * @temperature: the current temperature in celsius
 * @reserved: reserved
 */

struct ct_kill_notif {
	
__le16 temperature;
	
__le16 reserved;
} 
__packed; 
/* GRP_PHY_CT_KILL_NTF */

/**
* enum ctdp_cmd_operation - CTDP command operations
* @CTDP_CMD_OPERATION_START: update the current budget
* @CTDP_CMD_OPERATION_STOP: stop ctdp
* @CTDP_CMD_OPERATION_REPORT: get the avgerage budget
*/

enum iwl_mvm_ctdp_cmd_operation {
	
CTDP_CMD_OPERATION_START	= 0x1,
	
CTDP_CMD_OPERATION_STOP		= 0x2,
	
CTDP_CMD_OPERATION_REPORT	= 0x4,
};/* CTDP_CMD_OPERATION_TYPE_E */

/**
 * struct iwl_mvm_ctdp_cmd - track and manage the FW power consumption budget
 *
 * @operation: see &enum iwl_mvm_ctdp_cmd_operation
 * @budget: the budget in milliwatt
 * @window_size: defined in API but not used
 */

struct iwl_mvm_ctdp_cmd {
	
__le32 operation;
	
__le32 budget;
	
__le32 window_size;
} 
__packed;


#define IWL_MAX_DTS_TRIPS	8

/**
 * struct iwl_temp_report_ths_cmd - set temperature thresholds
 *
 * @num_temps: number of temperature thresholds passed
 * @thresholds: array with the thresholds to be configured
 */

struct temp_report_ths_cmd {
	
__le32 num_temps;
	
__le16 thresholds[IWL_MAX_DTS_TRIPS];
} 
__packed; 
/* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */

/***********************************
 * TDLS API
 ***********************************/

/* Type of TDLS request */

enum iwl_tdls_channel_switch_type {
	
TDLS_SEND_CHAN_SW_REQ = 0,
	
TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH,
	
TDLS_MOVE_CH,
}; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */

/**
 * Switch timing sub-element in a TDLS channel-switch command
 * @frame_timestamp: GP2 timestamp of channel-switch request/response packet
 *      received from peer
 * @max_offchan_duration: What amount of microseconds out of a DTIM is given
 *      to the TDLS off-channel communication. For instance if the DTIM is
 *      200TU and the TDLS peer is to be given 25% of the time, the value
 *      given will be 50TU, or 50 * 1024 if translated into microseconds.
 * @switch_time: switch time the peer sent in its channel switch timing IE
 * @switch_timout: switch timeout the peer sent in its channel switch timing IE
 */

struct iwl_tdls_channel_switch_timing {
	
__le32 frame_timestamp; /* GP2 time of peer packet Rx */
	
__le32 max_offchan_duration; /* given in micro-seconds */
	
__le32 switch_time; /* given in micro-seconds */
	
__le32 switch_timeout; /* given in micro-seconds */
} 
__packed; 
/* TDLS_STA_CHANNEL_SWITCH_TIMING_DATA_API_S_VER_1 */


#define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200

/**
 * TDLS channel switch frame template
 *
 * A template representing a TDLS channel-switch request or response frame
 *
 * @switch_time_offset: offset to the channel switch timing IE in the template
 * @tx_cmd: Tx parameters for the frame
 * @data: frame data
 */

struct iwl_tdls_channel_switch_frame {
	
__le32 switch_time_offset;
	
struct iwl_tx_cmd tx_cmd;
	
u8 data[IWL_TDLS_CH_SW_FRAME_MAX_SIZE];
} 
__packed; 
/* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */

/**
 * TDLS channel switch command
 *
 * The command is sent to initiate a channel switch and also in response to
 * incoming TDLS channel-switch request/response packets from remote peers.
 *
 * @switch_type: see &enum iwl_tdls_channel_switch_type
 * @peer_sta_id: station id of TDLS peer
 * @ci: channel we switch to
 * @timing: timing related data for command
 * @frame: channel-switch request/response template, depending to switch_type
 */

struct iwl_tdls_channel_switch_cmd {
	
u8 switch_type;
	
__le32 peer_sta_id;
	
struct iwl_fw_channel_info ci;
	
struct iwl_tdls_channel_switch_timing timing;
	
struct iwl_tdls_channel_switch_frame frame;
} 
__packed; 
/* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */

/**
 * TDLS channel switch start notification
 *
 * @status: non-zero on success
 * @offchannel_duration: duration given in microseconds
 * @sta_id: peer currently performing the channel-switch with
 */

struct iwl_tdls_channel_switch_notif {
	
__le32 status;
	
__le32 offchannel_duration;
	
__le32 sta_id;
} 
__packed; 
/* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */

/**
 * TDLS station info
 *
 * @sta_id: station id of the TDLS peer
 * @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx
 * @tx_to_peer_ssn: initial SSN the FW should use for Tx on its TID vs the peer
 * @is_initiator: 1 if the peer is the TDLS link initiator, 0 otherwise
 */

struct iwl_tdls_sta_info {
	
u8 sta_id;
	
u8 tx_to_peer_tid;
	
__le16 tx_to_peer_ssn;
	
__le32 is_initiator;
} 
__packed; 
/* TDLS_STA_INFO_VER_1 */

/**
 * TDLS basic config command
 *
 * @id_and_color: MAC id and color being configured
 * @tdls_peer_count: amount of currently connected TDLS peers
 * @tx_to_ap_tid: TID reverved vs. the AP for FW based Tx
 * @tx_to_ap_ssn: initial SSN the FW should use for Tx on its TID vs. the AP
 * @sta_info: per-station info. Only the first tdls_peer_count entries are set
 * @pti_req_data_offset: offset of network-level data for the PTI template
 * @pti_req_tx_cmd: Tx parameters for PTI request template
 * @pti_req_template: PTI request template data
 */

struct iwl_tdls_config_cmd {
	
__le32 id_and_color; /* mac id and color */
	
u8 tdls_peer_count;
	
u8 tx_to_ap_tid;
	
__le16 tx_to_ap_ssn;
	
struct iwl_tdls_sta_info sta_info[IWL_MVM_TDLS_STA_COUNT];

	
__le32 pti_req_data_offset;
	
struct iwl_tx_cmd pti_req_tx_cmd;
	
u8 pti_req_template[0];
} 
__packed; 
/* TDLS_CONFIG_CMD_API_S_VER_1 */

/**
 * TDLS per-station config information from FW
 *
 * @sta_id: station id of the TDLS peer
 * @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to
 *      the peer
 */

struct iwl_tdls_config_sta_info_res {
	
__le16 sta_id;
	
__le16 tx_to_peer_last_seq;
} 
__packed; 
/* TDLS_STA_INFO_RSP_VER_1 */

/**
 * TDLS config information from FW
 *
 * @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP
 * @sta_info: per-station TDLS config information
 */

struct iwl_tdls_config_res {
	
__le32 tx_to_ap_last_seq;
	
struct iwl_tdls_config_sta_info_res sta_info[IWL_MVM_TDLS_STA_COUNT];
} 
__packed; 
/* TDLS_CONFIG_RSP_API_S_VER_1 */


#define TX_FIFO_MAX_NUM_9000		8

#define TX_FIFO_MAX_NUM			15

#define RX_FIFO_MAX_NUM			2

#define TX_FIFO_INTERNAL_MAX_NUM	6

/**
 * Shared memory configuration information from the FW
 *
 * @shared_mem_addr: shared memory addr (pre 8000 HW set to 0x0 as MARBH is not
 *      accessible)
 * @shared_mem_size: shared memory size
 * @sample_buff_addr: internal sample (mon/adc) buff addr (pre 8000 HW set to
 *      0x0 as accessible only via DBGM RDAT)
 * @sample_buff_size: internal sample buff size
 * @txfifo_addr: start addr of TXF0 (excluding the context table 0.5KB), (pre
 *      8000 HW set to 0x0 as not accessible)
 * @txfifo_size: size of TXF0 ... TXF7
 * @rxfifo_size: RXF1, RXF2 sizes. If there is no RXF2, it'll have a value of 0
 * @page_buff_addr: used by UMAC and performance debug (page miss analysis),
 *      when paging is not supported this should be 0
 * @page_buff_size: size of %page_buff_addr
 * @rxfifo_addr: Start address of rxFifo
 * @internal_txfifo_addr: start address of internalFifo
 * @internal_txfifo_size: internal fifos' size
 *
 * NOTE: on firmware that don't have IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG
 *       set, the last 3 members don't exist.
 */

struct iwl_shared_mem_cfg_v1 {
	
__le32 shared_mem_addr;
	
__le32 shared_mem_size;
	
__le32 sample_buff_addr;
	
__le32 sample_buff_size;
	
__le32 txfifo_addr;
	
__le32 txfifo_size[TX_FIFO_MAX_NUM_9000];
	
__le32 rxfifo_size[RX_FIFO_MAX_NUM];
	
__le32 page_buff_addr;
	
__le32 page_buff_size;
	
__le32 rxfifo_addr;
	
__le32 internal_txfifo_addr;
	
__le32 internal_txfifo_size[TX_FIFO_INTERNAL_MAX_NUM];
} 
__packed; 
/* SHARED_MEM_ALLOC_API_S_VER_2 */


struct iwl_shared_mem_cfg {
	
__le32 shared_mem_addr;
	
__le32 shared_mem_size;
	
__le32 sample_buff_addr;
	
__le32 sample_buff_size;
	
__le32 txfifo_addr;
	
__le32 txfifo_size[TX_FIFO_MAX_NUM];
	
__le32 rxfifo_size[RX_FIFO_MAX_NUM];
	
__le32 page_buff_addr;
	
__le32 page_buff_size;
	
__le32 rxfifo_addr;
	
__le32 internal_txfifo_addr;
	
__le32 internal_txfifo_size[TX_FIFO_INTERNAL_MAX_NUM];
} 
__packed; 
/* SHARED_MEM_ALLOC_API_S_VER_3 */

/**
 * VHT MU-MIMO group configuration
 *
 * @membership_status: a bitmap of MU groups
 * @user_position:the position of station in a group. If the station is in the
 *      group then bits (group * 2) is the position -1
 */

struct iwl_mu_group_mgmt_cmd {
	
__le32 reserved;
	
__le32 membership_status[2];
	
__le32 user_position[4];
} 
__packed; 
/* MU_GROUP_ID_MNG_TABLE_API_S_VER_1 */

/**
 * struct iwl_mu_group_mgmt_notif - VHT MU-MIMO group id notification
 *
 * @membership_status: a bitmap of MU groups
 * @user_position: the position of station in a group. If the station is in the
 *      group then bits (group * 2) is the position -1
 */

struct iwl_mu_group_mgmt_notif {
	
__le32 membership_status[2];
	
__le32 user_position[4];
} 
__packed; 
/* MU_GROUP_MNG_NTFY_API_S_VER_1 */


#define MAX_STORED_BEACON_SIZE 600

/**
 * Stored beacon notification
 *
 * @system_time: system time on air rise
 * @tsf: TSF on air rise
 * @beacon_timestamp: beacon on air rise
 * @band: band, matches &RX_RES_PHY_FLAGS_BAND_24 definition
 * @channel: channel this beacon was received on
 * @rates: rate in ucode internal format
 * @byte_count: frame's byte count
 */

struct iwl_stored_beacon_notif {
	
__le32 system_time;
	
__le64 tsf;
	
__le32 beacon_timestamp;
	
__le16 band;
	
__le16 channel;
	
__le32 rates;
	
__le32 byte_count;
	
u8 data[MAX_STORED_BEACON_SIZE];
} 
__packed; 
/* WOWLAN_STROED_BEACON_INFO_S_VER_2 */


#define LQM_NUMBER_OF_STATIONS_IN_REPORT 16


enum iwl_lqm_cmd_operatrions {
	
LQM_CMD_OPERATION_START_MEASUREMENT = 0x01,
	
LQM_CMD_OPERATION_STOP_MEASUREMENT = 0x02,
};


enum iwl_lqm_status {
	
LQM_STATUS_SUCCESS = 0,
	
LQM_STATUS_TIMEOUT = 1,
	
LQM_STATUS_ABORT = 2,
};

/**
 * Link Quality Measurement command
 * @cmd_operatrion: command operation to be performed (start or stop)
 *      as defined above.
 * @mac_id: MAC ID the measurement applies to.
 * @measurement_time: time of the total measurement to be performed, in uSec.
 * @timeout: maximum time allowed until a response is sent, in uSec.
 */

struct iwl_link_qual_msrmnt_cmd {
	
__le32 cmd_operation;
	
__le32 mac_id;
	
__le32 measurement_time;
	
__le32 timeout;
} 
__packed /* LQM_CMD_API_S_VER_1 */;

/**
 * Link Quality Measurement notification
 *
 * @frequent_stations_air_time: an array containing the total air time
 *      (in uSec) used by the most frequently transmitting stations.
 * @number_of_stations: the number of uniqe stations included in the array
 *      (a number between 0 to 16)
 * @total_air_time_other_stations: the total air time (uSec) used by all the
 *      stations which are not included in the above report.
 * @time_in_measurement_window: the total time in uSec in which a measurement
 *      took place.
 * @tx_frame_dropped: the number of TX frames dropped due to retry limit during
 *      measurement
 * @mac_id: MAC ID the measurement applies to.
 * @status: return status. may be one of the LQM_STATUS_* defined above.
 * @reserved: reserved.
 */

struct iwl_link_qual_msrmnt_notif {
	
__le32 frequent_stations_air_time[LQM_NUMBER_OF_STATIONS_IN_REPORT];
	
__le32 number_of_stations;
	
__le32 total_air_time_other_stations;
	
__le32 time_in_measurement_window;
	
__le32 tx_frame_dropped;
	
__le32 mac_id;
	
__le32 status;
	
__le32 reserved[3];
} 
__packed; 
/* LQM_MEASUREMENT_COMPLETE_NTF_API_S_VER1 */

/**
 * Channel switch NOA notification
 *
 * @id_and_color: ID and color of the MAC
 */

struct iwl_channel_switch_noa_notif {
	
__le32 id_and_color;
} 
__packed; 
/* CHANNEL_SWITCH_START_NTFY_API_S_VER_1 */

/* Operation types for the debug mem access */
enum {
	
DEBUG_MEM_OP_READ = 0,
	
DEBUG_MEM_OP_WRITE = 1,
	
DEBUG_MEM_OP_WRITE_BYTES = 2,
};


#define DEBUG_MEM_MAX_SIZE_DWORDS 32

/**
 * struct iwl_dbg_mem_access_cmd - Request the device to read/write memory
 * @op: DEBUG_MEM_OP_*
 * @addr: address to read/write from/to
 * @len: in dwords, to read/write
 * @data: for write opeations, contains the source buffer
 */

struct iwl_dbg_mem_access_cmd {
	
__le32 op;
	
__le32 addr;
	
__le32 len;
	
__le32 data[];
} 
__packed; 
/* DEBUG_(U|L)MAC_RD_WR_CMD_API_S_VER_1 */

/* Status responses for the debug mem access */
enum {
	
DEBUG_MEM_STATUS_SUCCESS = 0x0,
	
DEBUG_MEM_STATUS_FAILED = 0x1,
	
DEBUG_MEM_STATUS_LOCKED = 0x2,
	
DEBUG_MEM_STATUS_HIDDEN = 0x3,
	
DEBUG_MEM_STATUS_LENGTH = 0x4,
};

/**
 * struct iwl_dbg_mem_access_rsp - Response to debug mem commands
 * @status: DEBUG_MEM_STATUS_*
 * @len: read dwords (0 for write operations)
 * @data: contains the read DWs
 */

struct iwl_dbg_mem_access_rsp {
	
__le32 status;
	
__le32 len;
	
__le32 data[];
} 
__packed; 
/* DEBUG_(U|L)MAC_RD_WR_RSP_API_S_VER_1 */

/**
 * struct iwl_nvm_access_complete_cmd - NVM_ACCESS commands are completed
 */

struct iwl_nvm_access_complete_cmd {
	
__le32 reserved;
} 
__packed; 
/* NVM_ACCESS_COMPLETE_CMD_API_S_VER_1 */

#endif /* __fw_api_h__ */

Overall Contributors

PersonTokensPropCommitsCommitProp
Johannes Berg132433.68%98.91%
Sara Sharon3178.06%1211.88%
Arik Nemtsov3117.91%65.94%
Eran Harary2606.61%76.93%
Matti Gottlieb2516.39%65.94%
Eytan Lifshitz2305.85%32.97%
Lilach Edelstein1584.02%10.99%
Eliad Peller1433.64%21.98%
Emmanuel Grumbach1283.26%1413.86%
Aviya Erenfeld1263.21%21.98%
Chaya Rachel Ivgy1233.13%43.96%
Liad Kaufman1122.85%98.91%
Ido Yariv992.52%10.99%
Golan Ben-Ami842.14%32.97%
Ariej Marjieh721.83%10.99%
Luciano Coelho541.37%32.97%
Hila Gonen310.79%21.98%
David Spinadel250.64%32.97%
Ilan Peer180.46%32.97%
Andrei Otcheretianski180.46%21.98%
Gregory Greenman120.31%10.99%
Alexander Bondar100.25%21.98%
Sharon Dvir90.23%10.99%
Avri Altman50.13%10.99%
Max Stepanov40.10%10.99%
Avraham Stern40.10%10.99%
Haim Dreyfuss30.08%10.99%
Total3931100.00%101100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.