Release 4.11 drivers/pci/hotplug/pciehp_pci.c

/*
 * PCI Express Hot Plug Controller Driver
 *
 * Copyright (C) 1995,2001 Compaq Computer Corporation
 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
 * Copyright (C) 2001 IBM Corp.
 * Copyright (C) 2003-2004 Intel Corporation
 *
 * All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or (at
 * your option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 * NON INFRINGEMENT.  See the GNU General Public License for more
 * details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
 *
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include "../pci.h"
#include "pciehp.h"



int pciehp_configure_device(struct slot *p_slot)
{
	struct pci_dev *dev;
	struct pci_dev *bridge = p_slot->ctrl->pcie->port;
	struct pci_bus *parent = bridge->subordinate;
	int num, ret = 0;
	struct controller *ctrl = p_slot->ctrl;

	pci_lock_rescan_remove();

	dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
	if (dev) {
		ctrl_err(ctrl, "Device %s already exists at %04x:%02x:00, cannot hot-add\n",
			 pci_name(dev), pci_domain_nr(parent), parent->number);
		pci_dev_put(dev);
		ret = -EEXIST;
		goto out;
	}

	num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
	if (num == 0) {
		ctrl_err(ctrl, "No new device found\n");
		ret = -ENODEV;
		goto out;
	}

	list_for_each_entry(dev, &parent->devices, bus_list)
		if (pci_is_bridge(dev))
			pci_hp_add_bridge(dev);

	pci_assign_unassigned_bridge_resources(bridge);
	pcie_bus_configure_settings(parent);
	pci_bus_add_devices(parent);

 out:
	pci_unlock_rescan_remove();
	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Dely Sy
59
31.05%
1
6.25%
Rajesh Shah
46
24.21%
1
6.25%
Rafael J. Wysocki
25
13.16%
1
6.25%
Taku Izumi
20
10.53%
2
12.50%
Yinghai Lu
15
7.89%
2
12.50%
Kenji Kaneshige
14
7.37%
4
25.00%
Yijing Wang
8
4.21%
3
18.75%
Björn Helgaas
2
1.05%
1
6.25%
Ryan Desfosses
1
0.53%
1
6.25%
Total
190
100.00%
16
100.00%



int pciehp_unconfigure_device(struct slot *p_slot)
{
	int rc = 0;
	u8 bctl = 0;
	u8 presence = 0;
	struct pci_dev *dev, *temp;
	struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
	u16 command;
	struct controller *ctrl = p_slot->ctrl;

	ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n",
		 __func__, pci_domain_nr(parent), parent->number);
	pciehp_get_adapter_status(p_slot, &presence);

	pci_lock_rescan_remove();

	/*
         * Stopping an SR-IOV PF device removes all the associated VFs,
         * which will update the bus->devices list and confuse the
         * iterator.  Therefore, iterate in reverse so we remove the VFs
         * first, then the PF.  We do the same in pci_stop_bus_device().
         */
	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
					 bus_list) {
		pci_dev_get(dev);
		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
			pci_read_config_byte(dev, PCI_BRIDGE_CONTROL, &bctl);
			if (bctl & PCI_BRIDGE_CTL_VGA) {
				ctrl_err(ctrl,
					 "Cannot remove display device %s\n",
					 pci_name(dev));
				pci_dev_put(dev);
				rc = -EINVAL;
				break;
			}
		}
		pci_stop_and_remove_bus_device(dev);
		/*
                 * Ensure that no new Requests will be generated from
                 * the device.
                 */
		if (presence) {
			pci_read_config_word(dev, PCI_COMMAND, &command);
			command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
			command |= PCI_COMMAND_INTX_DISABLE;
			pci_write_config_word(dev, PCI_COMMAND, command);
		}
		pci_dev_put(dev);
	}

	pci_unlock_rescan_remove();
	return rc;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
Kenji Kaneshige
76
35.35%
6
31.58%
Dely Sy
46
21.40%
2
10.53%
Yijing Wang
26
12.09%
1
5.26%
Rajesh Shah
22
10.23%
1
5.26%
Taku Izumi
20
9.30%
2
10.53%
Kristen Carlson Accardi
9
4.19%
1
5.26%
Praveen Kalamegham
6
2.79%
2
10.53%
Rafael J. Wysocki
6
2.79%
1
5.26%
Yinghai Lu
3
1.40%
2
10.53%
Harvey Harrison
1
0.47%
1
5.26%
Total
215
100.00%
19
100.00%

Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Dely Sy
123
29.01%
2
7.41%
Kenji Kaneshige
90
21.23%
6
22.22%
Rajesh Shah
68
16.04%
2
7.41%
Taku Izumi
40
9.43%
2
7.41%
Yijing Wang
34
8.02%
3
11.11%
Rafael J. Wysocki
31
7.31%
1
3.70%
Yinghai Lu
18
4.25%
4
14.81%
Kristen Carlson Accardi
10
2.36%
2
7.41%
Praveen Kalamegham
6
1.42%
2
7.41%
Björn Helgaas
2
0.47%
1
3.70%
Ryan Desfosses
1
0.24%
1
3.70%
Harvey Harrison
1
0.24%
1
3.70%
Total
424
100.00%
27
100.00%
Directory: drivers/pci/hotplug

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.