Release 4.11 drivers/pci/setup-irq.c
/*
* drivers/pci/setup-irq.c
*
* Extruded from code written by
* Dave Rusling (david.rusling@reo.mts.dec.com)
* David Mosberger (davidm@cs.arizona.edu)
* David Miller (davem@redhat.com)
*
* Support routines for initializing a PCI subsystem.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/cache.h>
void __weak pcibios_update_irq(struct pci_dev *dev, int irq)
{
dev_dbg(&dev->dev, "assigning IRQ %02d\n", irq);
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Thierry Reding | 35 | 100.00% | 1 | 100.00% |
| Total | 35 | 100.00% | 1 | 100.00% |
static void pdev_fixup_irq(struct pci_dev *dev,
u8 (*swizzle)(struct pci_dev *, u8 *),
int (*map_irq)(const struct pci_dev *, u8, u8))
{
u8 pin, slot;
int irq = 0;
/* If this device is not on the primary bus, we need to figure out
which interrupt pin it will come in on. We know which slot it
will come in on 'cos that slot is where the bridge is. Each
time the interrupt line passes through a PCI-PCI bridge we must
apply the swizzle function. */
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
/* Cope with illegal. */
if (pin > 4)
pin = 1;
if (pin != 0) {
/* Follow the chain of bridges, swizzling as we go. */
slot = (*swizzle)(dev, &pin);
irq = (*map_irq)(dev, slot, pin);
if (irq == -1)
irq = 0;
}
dev->irq = irq;
dev_dbg(&dev->dev, "fixup irq: got %d\n", dev->irq);
/* Always tell the device, so the driver knows what is
the real IRQ to use; the device does not use it. */
pcibios_update_irq(dev, irq);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds (pre-git) | 129 | 87.16% | 1 | 14.29% |
| Andreas Block | 11 | 7.43% | 1 | 14.29% |
| Björn Helgaas | 4 | 2.70% | 2 | 28.57% |
| Greg Kroah-Hartman | 2 | 1.35% | 1 | 14.29% |
| Matthew Wilcox | 1 | 0.68% | 1 | 14.29% |
| Ralf Bächle | 1 | 0.68% | 1 | 14.29% |
| Total | 148 | 100.00% | 7 | 100.00% |
void pci_fixup_irqs(u8 (*swizzle)(struct pci_dev *, u8 *),
int (*map_irq)(const struct pci_dev *, u8, u8))
{
struct pci_dev *dev = NULL;
for_each_pci_dev(dev)
pdev_fixup_irq(dev, swizzle, map_irq);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds (pre-git) | 49 | 89.09% | 1 | 20.00% |
| Greg Kroah-Hartman | 2 | 3.64% | 1 | 20.00% |
| Vasiliy Kulikov | 2 | 3.64% | 1 | 20.00% |
| Ryan Desfosses | 1 | 1.82% | 1 | 20.00% |
| Ralf Bächle | 1 | 1.82% | 1 | 20.00% |
| Total | 55 | 100.00% | 5 | 100.00% |
EXPORT_SYMBOL_GPL(pci_fixup_irqs);
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds (pre-git) | 194 | 74.90% | 1 | 8.33% |
| Thierry Reding | 35 | 13.51% | 1 | 8.33% |
| Andreas Block | 11 | 4.25% | 1 | 8.33% |
| Ray Jui | 5 | 1.93% | 1 | 8.33% |
| Greg Kroah-Hartman | 4 | 1.54% | 2 | 16.67% |
| Björn Helgaas | 4 | 1.54% | 2 | 16.67% |
| Vasiliy Kulikov | 2 | 0.77% | 1 | 8.33% |
| Ralf Bächle | 2 | 0.77% | 1 | 8.33% |
| Ryan Desfosses | 1 | 0.39% | 1 | 8.33% |
| Matthew Wilcox | 1 | 0.39% | 1 | 8.33% |
| Total | 259 | 100.00% | 12 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.