cregit-Linux how code gets into the kernel

Release 4.11 drivers/pcmcia/sa1111_jornada720.c

Directory: drivers/pcmcia
/*
 * drivers/pcmcia/sa1100_jornada720.c
 *
 * Jornada720 PCMCIA specific routines
 *
 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/io.h>

#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>

#include "sa1111_generic.h"

/* Does SOCKET1_3V actually do anything? */

#define SOCKET0_POWER	GPIO_GPIO0

#define SOCKET0_3V	GPIO_GPIO2

#define SOCKET1_POWER	(GPIO_GPIO1 | GPIO_GPIO3)

#define SOCKET1_3V	GPIO_GPIO3


static int jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) { struct sa1111_pcmcia_socket *s = to_skt(skt); unsigned int pa_dwr_mask, pa_dwr_set; int ret; printk(KERN_INFO "%s(): config socket %d vcc %d vpp %d\n", __func__, skt->nr, state->Vcc, state->Vpp); switch (skt->nr) { case 0: pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V; switch (state->Vcc) { default: case 0: pa_dwr_set = 0; break; case 33: pa_dwr_set = SOCKET0_POWER | SOCKET0_3V; break; case 50: pa_dwr_set = SOCKET0_POWER; break; } break; case 1: pa_dwr_mask = SOCKET1_POWER; switch (state->Vcc) { default: case 0: pa_dwr_set = 0; break; case 33: pa_dwr_set = SOCKET1_POWER; break; case 50: pa_dwr_set = SOCKET1_POWER; break; } break; default: return -1; } if (state->Vpp != state->Vcc && state->Vpp != 0) { printk(KERN_ERR "%s(): slot cannot support VPP %u\n", __func__, state->Vpp); return -EPERM; } ret = sa1111_pcmcia_configure_socket(skt, state); if (ret == 0) sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds11553.00%19.09%
Russell King9041.47%654.55%
Michael Gernoth73.23%19.09%
Kristoffer Ericson20.92%19.09%
Harvey Harrison20.92%19.09%
Nico Pitre10.46%19.09%
Total217100.00%11100.00%

static struct pcmcia_low_level jornada720_pcmcia_ops = { .owner = THIS_MODULE, .configure_socket = jornada720_pcmcia_configure_socket, .first = 0, .nr = 2, };
int pcmcia_jornada720_init(struct sa1111_dev *sadev) { unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3; /* Fixme: why messing around with SA11x0's GPIO1? */ GRER |= 0x00000002; /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */ sa1111_set_io_dir(sadev, pin, 0, 0); sa1111_set_io(sadev, pin, 0); sa1111_set_sleep_io(sadev, pin, 0); sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops); return sa1111_pcmcia_add(sadev, &jornada720_pcmcia_ops, sa11xx_drv_pcmcia_add_one); }

Contributors

PersonTokensPropCommitsCommitProp
Russell King6891.89%675.00%
Arnd Bergmann45.41%112.50%
Dmitry Baryshkov22.70%112.50%
Total74100.00%8100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
Russell King19653.55%1161.11%
Linus Torvalds14840.44%15.56%
Arnd Bergmann71.91%15.56%
Michael Gernoth71.91%15.56%
Kristoffer Ericson30.82%15.56%
Harvey Harrison20.55%15.56%
Dmitry Baryshkov20.55%15.56%
Nico Pitre10.27%15.56%
Total366100.00%18100.00%
Directory: drivers/pcmcia
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.