#ifndef __YENTA_H #define __YENTA_H #include <asm/io.h> #define CB_SOCKET_EVENT 0x00 #define CB_CSTSEVENT 0x00000001 /* Card status event */ #define CB_CD1EVENT 0x00000002 /* Card detect 1 change event */ #define CB_CD2EVENT 0x00000004 /* Card detect 2 change event */ #define CB_PWREVENT 0x00000008 /* PWRCYCLE change event */ #define CB_SOCKET_MASK 0x04 #define CB_CSTSMASK 0x00000001 /* Card status mask */ #define CB_CDMASK 0x00000006 /* Card detect 1&2 mask */ #define CB_PWRMASK 0x00000008 /* PWRCYCLE change mask */ #define CB_SOCKET_STATE 0x08 #define CB_CARDSTS 0x00000001 /* CSTSCHG status */ #define CB_CDETECT1 0x00000002 /* Card detect status 1 */ #define CB_CDETECT2 0x00000004 /* Card detect status 2 */ #define CB_PWRCYCLE 0x00000008 /* Socket powered */ #define CB_16BITCARD 0x00000010 /* 16-bit card detected */ #define CB_CBCARD 0x00000020 /* CardBus card detected */ #define CB_IREQCINT 0x00000040 /* READY(xIRQ)/xCINT high */ #define CB_NOTACARD 0x00000080 /* Unrecognizable PC card detected */ #define CB_DATALOST 0x00000100 /* Potential data loss due to card removal */ #define CB_BADVCCREQ 0x00000200 /* Invalid Vcc request by host software */ #define CB_5VCARD 0x00000400 /* Card Vcc at 5.0 volts? */ #define CB_3VCARD 0x00000800 /* Card Vcc at 3.3 volts? */ #define CB_XVCARD 0x00001000 /* Card Vcc at X.X volts? */ #define CB_YVCARD 0x00002000 /* Card Vcc at Y.Y volts? */ #define CB_5VSOCKET 0x10000000 /* Socket Vcc at 5.0 volts? */ #define CB_3VSOCKET 0x20000000 /* Socket Vcc at 3.3 volts? */ #define CB_XVSOCKET 0x40000000 /* Socket Vcc at X.X volts? */ #define CB_YVSOCKET 0x80000000 /* Socket Vcc at Y.Y volts? */ #define CB_SOCKET_FORCE 0x0C #define CB_FCARDSTS 0x00000001 /* Force CSTSCHG */ #define CB_FCDETECT1 0x00000002 /* Force CD1EVENT */ #define CB_FCDETECT2 0x00000004 /* Force CD2EVENT */ #define CB_FPWRCYCLE 0x00000008 /* Force PWREVENT */ #define CB_F16BITCARD 0x00000010 /* Force 16-bit PCMCIA card */ #define CB_FCBCARD 0x00000020 /* Force CardBus line */ #define CB_FNOTACARD 0x00000080 /* Force NOTACARD */ #define CB_FDATALOST 0x00000100 /* Force data lost */ #define CB_FBADVCCREQ 0x00000200 /* Force bad Vcc request */ #define CB_F5VCARD 0x00000400 /* Force 5.0 volt card */ #define CB_F3VCARD 0x00000800 /* Force 3.3 volt card */ #define CB_FXVCARD 0x00001000 /* Force X.X volt card */ #define CB_FYVCARD 0x00002000 /* Force Y.Y volt card */ #define CB_CVSTEST 0x00004000 /* Card VS test */ #define CB_SOCKET_CONTROL 0x10 #define CB_SC_VPP_MASK 0x00000007 #define CB_SC_VPP_OFF 0x00000000 #define CB_SC_VPP_12V 0x00000001 #define CB_SC_VPP_5V 0x00000002 #define CB_SC_VPP_3V 0x00000003 #define CB_SC_VPP_XV 0x00000004 #define CB_SC_VPP_YV 0x00000005 #define CB_SC_VCC_MASK 0x00000070 #define CB_SC_VCC_OFF 0x00000000 #define CB_SC_VCC_5V 0x00000020 #define CB_SC_VCC_3V 0x00000030 #define CB_SC_VCC_XV 0x00000040 #define CB_SC_VCC_YV 0x00000050 #define CB_SC_CCLK_STOP 0x00000080 #define CB_SOCKET_POWER 0x20 #define CB_SKTACCES 0x02000000 /* A PC card access has occurred (clear on read) */ #define CB_SKTMODE 0x01000000 /* Clock frequency has changed (clear on read) */ #define CB_CLKCTRLEN 0x00010000 /* Clock control enabled (RW) */ #define CB_CLKCTRL 0x00000001 /* Stop(0) or slow(1) CB clock (RW) */ /* * Cardbus configuration space */ #define CB_BRIDGE_BASE(m) (0x1c + 8*(m)) #define CB_BRIDGE_LIMIT(m) (0x20 + 8*(m)) #define CB_BRIDGE_CONTROL 0x3e #define CB_BRIDGE_CPERREN 0x00000001 #define CB_BRIDGE_CSERREN 0x00000002 #define CB_BRIDGE_ISAEN 0x00000004 #define CB_BRIDGE_VGAEN 0x00000008 #define CB_BRIDGE_MABTMODE 0x00000020 #define CB_BRIDGE_CRST 0x00000040 #define CB_BRIDGE_INTR 0x00000080 #define CB_BRIDGE_PREFETCH0 0x00000100 #define CB_BRIDGE_PREFETCH1 0x00000200 #define CB_BRIDGE_POSTEN 0x00000400 #define CB_LEGACY_MODE_BASE 0x44 /* * ExCA area extensions in Yenta */ #define CB_MEM_PAGE(map) (0x40 + (map)) /* control how 16bit cards are powered */ #define YENTA_16BIT_POWER_EXCA 0x00000001 #define YENTA_16BIT_POWER_DF 0x00000002 struct yenta_socket; struct cardbus_type { int (*override)(struct yenta_socket *); void (*save_state)(struct yenta_socket *); void (*restore_state)(struct yenta_socket *); int (*sock_init)(struct yenta_socket *); }; struct yenta_socket { struct pci_dev *dev; int cb_irq, io_irq; void __iomem *base; struct timer_list poll_timer; struct pcmcia_socket socket; struct cardbus_type *type; u32 flags; /* for PCI interrupt probing */ unsigned int probe_status; /* A few words of private data for special stuff of overrides... */ unsigned int private[8]; /* PCI saved state */ u32 saved_state[2]; }; #endifOverall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds (pre-git) | 377 | 76.32% | 4 | 33.33% |
| Russell King | 63 | 12.75% | 3 | 25.00% |
| Dominik Brodowski | 35 | 7.09% | 1 | 8.33% |
| Daniel Ritz | 17 | 3.44% | 2 | 16.67% |
| Roger Luethi | 1 | 0.20% | 1 | 8.33% |
| Linus Torvalds | 1 | 0.20% | 1 | 8.33% |
| Total | 494 | 100.00% | 12 | 100.00% |