cregit-Linux how code gets into the kernel

Release 4.11 drivers/rtc/rtc-ab3100.c

Directory: drivers/rtc
/*
 * Copyright (C) 2007-2009 ST-Ericsson AB
 * License terms: GNU General Public License (GPL) version 2
 * RTC clock driver for the AB3100 Analog Baseband Chip
 * Author: Linus Walleij <linus.walleij@stericsson.com>
 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <linux/mfd/abx500.h>

/* Clock rate in Hz */

#define AB3100_RTC_CLOCK_RATE	32768

/*
 * The AB3100 RTC registers. These are the same for
 * AB3000 and AB3100.
 * Control register:
 * Bit 0: RTC Monitor cleared=0, active=1, if you set it
 *        to 1 it remains active until RTC power is lost.
 * Bit 1: 32 kHz Oscillator, 0 = on, 1 = bypass
 * Bit 2: Alarm on, 0 = off, 1 = on
 * Bit 3: 32 kHz buffer disabling, 0 = enabled, 1 = disabled
 */

#define AB3100_RTC		0x53
/* default setting, buffer disabled, alarm on */

#define RTC_SETTING		0x30
/* Alarm when AL0-AL3 == TI0-TI3  */

#define AB3100_AL0		0x56

#define AB3100_AL1		0x57

#define AB3100_AL2		0x58

#define AB3100_AL3		0x59
/* This 48-bit register that counts up at 32768 Hz */

#define AB3100_TI0		0x5a

#define AB3100_TI1		0x5b

#define AB3100_TI2		0x5c

#define AB3100_TI3		0x5d

#define AB3100_TI4		0x5e

#define AB3100_TI5		0x5f

/*
 * RTC clock functions and device struct declaration
 */

static int ab3100_rtc_set_mmss(struct device *dev, time64_t secs) { u8 regs[] = {AB3100_TI0, AB3100_TI1, AB3100_TI2, AB3100_TI3, AB3100_TI4, AB3100_TI5}; unsigned char buf[6]; u64 hw_counter = secs * AB3100_RTC_CLOCK_RATE * 2; int err = 0; int i; buf[0] = (hw_counter) & 0xFF; buf[1] = (hw_counter >> 8) & 0xFF; buf[2] = (hw_counter >> 16) & 0xFF; buf[3] = (hw_counter >> 24) & 0xFF; buf[4] = (hw_counter >> 32) & 0xFF; buf[5] = (hw_counter >> 40) & 0xFF; for (i = 0; i < 6; i++) { err = abx500_set_register_interruptible(dev, 0, regs[i], buf[i]); if (err) return err; } /* Set the flag to mark that the clock is now set */ return abx500_mask_and_set_register_interruptible(dev, 0, AB3100_RTC, 0x01, 0x01); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij17190.96%133.33%
Mattias Wallin94.79%133.33%
Xunlei Pang84.26%133.33%
Total188100.00%3100.00%


static int ab3100_rtc_read_time(struct device *dev, struct rtc_time *tm) { time64_t time; u8 rtcval; int err; err = abx500_get_register_interruptible(dev, 0, AB3100_RTC, &rtcval); if (err) return err; if (!(rtcval & 0x01)) { dev_info(dev, "clock not set (lost power)"); return -EINVAL; } else { u64 hw_counter; u8 buf[6]; /* Read out time registers */ err = abx500_get_register_page_interruptible(dev, 0, AB3100_TI0, buf, 6); if (err != 0) return err; hw_counter = ((u64) buf[5] << 40) | ((u64) buf[4] << 32) | ((u64) buf[3] << 24) | ((u64) buf[2] << 16) | ((u64) buf[1] << 8) | (u64) buf[0]; time = hw_counter / (u64) (AB3100_RTC_CLOCK_RATE * 2); } rtc_time64_to_tm(time, tm); return rtc_valid_tm(tm); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij18893.53%133.33%
Mattias Wallin83.98%133.33%
Xunlei Pang52.49%133.33%
Total201100.00%3100.00%


static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) { time64_t time; u64 hw_counter; u8 buf[6]; u8 rtcval; int err; /* Figure out if alarm is enabled or not */ err = abx500_get_register_interruptible(dev, 0, AB3100_RTC, &rtcval); if (err) return err; if (rtcval & 0x04) alarm->enabled = 1; else alarm->enabled = 0; /* No idea how this could be represented */ alarm->pending = 0; /* Read out alarm registers, only 4 bytes */ err = abx500_get_register_page_interruptible(dev, 0, AB3100_AL0, buf, 4); if (err) return err; hw_counter = ((u64) buf[3] << 40) | ((u64) buf[2] << 32) | ((u64) buf[1] << 24) | ((u64) buf[0] << 16); time = hw_counter / (u64) (AB3100_RTC_CLOCK_RATE * 2); rtc_time64_to_tm(time, &alarm->time); return rtc_valid_tm(&alarm->time); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij17493.05%133.33%
Mattias Wallin84.28%133.33%
Xunlei Pang52.67%133.33%
Total187100.00%3100.00%


static int ab3100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) { u8 regs[] = {AB3100_AL0, AB3100_AL1, AB3100_AL2, AB3100_AL3}; unsigned char buf[4]; time64_t secs; u64 hw_counter; int err; int i; secs = rtc_tm_to_time64(&alarm->time); hw_counter = secs * AB3100_RTC_CLOCK_RATE * 2; buf[0] = (hw_counter >> 16) & 0xFF; buf[1] = (hw_counter >> 24) & 0xFF; buf[2] = (hw_counter >> 32) & 0xFF; buf[3] = (hw_counter >> 40) & 0xFF; /* Set the alarm */ for (i = 0; i < 4; i++) { err = abx500_set_register_interruptible(dev, 0, regs[i], buf[i]); if (err) return err; } /* Then enable the alarm */ return abx500_mask_and_set_register_interruptible(dev, 0, AB3100_RTC, (1 << 2), alarm->enabled << 2); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij16690.22%133.33%
Xunlei Pang105.43%133.33%
Mattias Wallin84.35%133.33%
Total184100.00%3100.00%


static int ab3100_rtc_irq_enable(struct device *dev, unsigned int enabled) { /* * It's not possible to enable/disable the alarm IRQ for this RTC. * It does not actually trigger any IRQ: instead its only function is * to power up the system, if it wasn't on. This will manifest as * a "power up cause" in the AB3100 power driver (battery charging etc) * and need to be handled there instead. */ if (enabled) return abx500_mask_and_set_register_interruptible(dev, 0, AB3100_RTC, (1 << 2), 1 << 2); else return abx500_mask_and_set_register_interruptible(dev, 0, AB3100_RTC, (1 << 2), 0); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij5186.44%150.00%
Mattias Wallin813.56%150.00%
Total59100.00%2100.00%

static const struct rtc_class_ops ab3100_rtc_ops = { .read_time = ab3100_rtc_read_time, .set_mmss64 = ab3100_rtc_set_mmss, .read_alarm = ab3100_rtc_read_alarm, .set_alarm = ab3100_rtc_set_alarm, .alarm_irq_enable = ab3100_rtc_irq_enable, };
static int __init ab3100_rtc_probe(struct platform_device *pdev) { int err; u8 regval; struct rtc_device *rtc; /* The first RTC register needs special treatment */ err = abx500_get_register_interruptible(&pdev->dev, 0, AB3100_RTC, &regval); if (err) { dev_err(&pdev->dev, "unable to read RTC register\n"); return -ENODEV; } if ((regval & 0xFE) != RTC_SETTING) { dev_warn(&pdev->dev, "not default value in RTC reg 0x%x\n", regval); } if ((regval & 1) == 0) { /* * Set bit to detect power loss. * This bit remains until RTC power is lost. */ regval = 1 | RTC_SETTING; err = abx500_set_register_interruptible(&pdev->dev, 0, AB3100_RTC, regval); /* Ignore any error on this write */ } rtc = devm_rtc_device_register(&pdev->dev, "ab3100-rtc", &ab3100_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) { err = PTR_ERR(rtc); return err; } platform_set_drvdata(pdev, rtc); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij14385.63%125.00%
Mattias Wallin148.38%125.00%
Axel Lin74.19%125.00%
Jingoo Han31.80%125.00%
Total167100.00%4100.00%

static struct platform_driver ab3100_rtc_driver = { .driver = { .name = "ab3100-rtc", }, }; module_platform_driver_probe(ab3100_rtc_driver, ab3100_rtc_probe); MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); MODULE_DESCRIPTION("AB3100 RTC Driver"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij104091.63%228.57%
Mattias Wallin554.85%114.29%
Xunlei Pang292.56%114.29%
Axel Lin70.62%114.29%
Jingoo Han40.35%228.57%
Total1135100.00%7100.00%
Directory: drivers/rtc
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.