cregit-Linux how code gets into the kernel

Release 4.11 drivers/scsi/a4000t.c

Directory: drivers/scsi
/*
 * Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux.
 *              Amiga Technologies A4000T SCSI controller.
 *
 * Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk>
 * plus modifications of the 53c7xx.c driver to support the Amiga.
 *
 * Rewritten to use 53c700.c by Kars de Jong <jongk@linux-m68k.org>
 */

#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_spi.h>

#include "53c700.h"



static struct scsi_host_template a4000t_scsi_driver_template = {
	.name		= "A4000T builtin SCSI",
	.proc_name	= "A4000t",
	.this_id	= 7,
	.module		= THIS_MODULE,
};



#define A4000T_SCSI_OFFSET	0x40


static int __init amiga_a4000t_scsi_probe(struct platform_device *pdev) { struct resource *res; phys_addr_t scsi_addr; struct NCR_700_Host_Parameters *hostdata; struct Scsi_Host *host; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -ENODEV; if (!request_mem_region(res->start, resource_size(res), "A4000T builtin SCSI")) return -EBUSY; hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL); if (!hostdata) { dev_err(&pdev->dev, "Failed to allocate host data\n"); goto out_release; } scsi_addr = res->start + A4000T_SCSI_OFFSET; /* Fill in the required pieces of hostdata */ hostdata->base = ZTWO_VADDR(scsi_addr); hostdata->clock = 50; hostdata->chip710 = 1; hostdata->dmode_extra = DMODE_FC2; hostdata->dcntl_extra = EA_710; /* and register the chip */ host = NCR_700_detect(&a4000t_scsi_driver_template, hostdata, &pdev->dev); if (!host) { dev_err(&pdev->dev, "No host detected; board configuration problem?\n"); goto out_free; } host->this_id = 7; host->base = scsi_addr; host->irq = IRQ_AMIGA_PORTS; if (request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "a4000t-scsi", host)) { dev_err(&pdev->dev, "request_irq failed\n"); goto out_put_host; } platform_set_drvdata(pdev, host); scsi_scan_host(host); return 0; out_put_host: scsi_host_put(host); out_free: kfree(hostdata); out_release: release_mem_region(res->start, resource_size(res)); return -ENODEV; }

Contributors

PersonTokensPropCommitsCommitProp
Kars de Jong18867.38%116.67%
Geert Uytterhoeven8229.39%233.33%
Matthew Wilcox51.79%116.67%
Lei Ming20.72%116.67%
Mariusz Kozlowski20.72%116.67%
Total279100.00%6100.00%


static int __exit amiga_a4000t_scsi_remove(struct platform_device *pdev) { struct Scsi_Host *host = platform_get_drvdata(pdev); struct NCR_700_Host_Parameters *hostdata = shost_priv(host); struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); scsi_remove_host(host); NCR_700_release(host); kfree(hostdata); free_irq(host->irq, host); release_mem_region(res->start, resource_size(res)); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Kars de Jong5868.24%133.33%
Geert Uytterhoeven2529.41%133.33%
Lei Ming22.35%133.33%
Total85100.00%3100.00%

static struct platform_driver amiga_a4000t_scsi_driver = { .remove = __exit_p(amiga_a4000t_scsi_remove), .driver = { .name = "amiga-a4000t-scsi", }, }; module_platform_driver_probe(amiga_a4000t_scsi_driver, amiga_a4000t_scsi_probe); MODULE_AUTHOR("Alan Hourihane <alanh@fairlite.demon.co.uk> / " "Kars de Jong <jongk@linux-m68k.org>"); MODULE_DESCRIPTION("Amiga A4000T NCR53C710 driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:amiga-a4000t-scsi");

Overall Contributors

PersonTokensPropCommitsCommitProp
Kars de Jong31565.76%111.11%
Geert Uytterhoeven14329.85%333.33%
Lei Ming102.09%111.11%
Matthew Wilcox51.04%111.11%
Tejun Heo30.63%111.11%
Mariusz Kozlowski20.42%111.11%
Jingoo Han10.21%111.11%
Total479100.00%9100.00%
Directory: drivers/scsi
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.