Release 4.11 drivers/scsi/scsi_ioctl.c
/*
* Changes:
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> 08/23/2000
* - get rid of some verify_areas and use __copy*user and __get/put_user
* for the ones that remain
*/
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/uaccess.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_ioctl.h>
#include <scsi/sg.h>
#include <scsi/scsi_dbg.h>
#include "scsi_logging.h"
#define NORMAL_RETRIES 5
#define IOCTL_NORMAL_TIMEOUT (10 * HZ)
#define MAX_BUF PAGE_SIZE
/**
* ioctl_probe -- return host identification
* @host: host to identify
* @buffer: userspace buffer for identification
*
* Return an identifying string at @buffer, if @buffer is non-NULL, filling
* to the length stored at * (int *) @buffer.
*/
static int ioctl_probe(struct Scsi_Host *host, void __user *buffer)
{
unsigned int len, slen;
const char *string;
if (buffer) {
if (get_user(len, (unsigned int __user *) buffer))
return -EFAULT;
if (host->hostt->info)
string = host->hostt->info(host);
else
string = host->hostt->name;
if (string) {
slen = strlen(string);
if (len > slen)
len = slen + 1;
if (copy_to_user(buffer, string, len))
return -EFAULT;
}
}
return 1;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds (pre-git) | 120 | 97.56% | 10 | 83.33% |
| Al Viro | 2 | 1.63% | 1 | 8.33% |
| Christoph Hellwig | 1 | 0.81% | 1 | 8.33% |
| Total | 123 | 100.00% | 12 | 100.00% |
/*
* The SCSI_IOCTL_SEND_COMMAND ioctl sends a command out to the SCSI host.
* The IOCTL_NORMAL_TIMEOUT and NORMAL_RETRIES variables are used.
*
* dev is the SCSI device struct ptr, *(int *) arg is the length of the
* input data, if any, not including the command string & counts,
* *((int *)arg + 1) is the output buffer size in bytes.
*
* *(char *) ((int *) arg)[2] the actual command byte.
*
* Note that if more than MAX_BUF bytes are requested to be transferred,
* the ioctl will fail with error EINVAL.
*
* This size *does not* include the initial lengths that were passed.
*
* The SCSI command is read from the memory location immediately after the
* length words, and the input data is right after the command. The SCSI
* routines know the command size based on the opcode decode.
*
* The output area is then filled in starting from the command byte.
*/
static int ioctl_internal_command(struct scsi_device *sdev, char *cmd,
int timeout, int retries)
{
int result;
struct scsi_sense_hdr sshdr;
SCSI_LOG_IOCTL(1, sdev_printk(KERN_INFO, sdev,
"Trying ioctl with scsi command %d\n", *cmd));
result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0,
&sshdr, timeout, retries, NULL);
SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev,
"Ioctl returned 0x%x\n", result));
if ((driver_byte(result) & DRIVER_SENSE) &&
(scsi_sense_valid(&sshdr))) {
switch (sshdr.sense_key) {
case ILLEGAL_REQUEST:
if (cmd[0] == ALLOW_MEDIUM_REMOVAL)
sdev->lockable = 0;
else
sdev_printk(KERN_INFO, sdev,
"ioctl_internal_command: "
"ILLEGAL REQUEST "
"asc=0x%x ascq=0x%x\n",
sshdr.asc, sshdr.ascq);
break;
case NOT_READY: /* This happens if there is no disc in drive */
if (sdev->removable)
break;
case UNIT_ATTENTION:
if (sdev->removable) {
sdev->changed = 1;
result = 0; /* This is no longer considered an error */
break;
}
default: /* Fall through for non-removable media */
sdev_printk(KERN_INFO, sdev,
"ioctl_internal_command return code = %x\n",
result);
scsi_print_sense_hdr(sdev, NULL, &sshdr);
break;
}
}
SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev,
"IOCTL Releasing command\n"));
return result;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds (pre-git) | 141 | 61.84% | 7 | 46.67% |
| Douglas Gilbert | 29 | 12.72% | 1 | 6.67% |
| Hannes Reinecke | 24 | 10.53% | 2 | 13.33% |
| James Bottomley | 19 | 8.33% | 3 | 20.00% |
| Christoph Hellwig | 13 | 5.70% | 1 | 6.67% |
| FUJITA Tomonori | 2 | 0.88% | 1 | 6.67% |
| Total | 228 | 100.00% | 15 | 100.00% |
int scsi_set_medium_removal(struct scsi_device *sdev, char state)
{
char scsi_cmd[MAX_COMMAND_SIZE];
int ret;
if (!sdev->removable || !sdev->lockable)
return 0;
scsi_cmd[0] = ALLOW_MEDIUM_REMOVAL;
scsi_cmd[1] = 0;
scsi_cmd[2] = 0;
scsi_cmd[3] = 0;
scsi_cmd[4] = state;
scsi_cmd[5] = 0;
ret = ioctl_internal_command(sdev, scsi_cmd,
IOCTL_NORMAL_TIMEOUT, NORMAL_RETRIES);
if (ret == 0)
sdev->locked = (state == SCSI_REMOVAL_PREVENT);
return ret;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alan Cox | 102 | 91.89% | 1 | 50.00% |
| Christoph Hellwig | 9 | 8.11% | 1 | 50.00% |
| Total | 111 | 100.00% | 2 | 100.00% |
EXPORT_SYMBOL(scsi_set_medium_removal);
/*
* The scsi_ioctl_get_pci() function places into arg the value
* pci_dev::slot_name (8 characters) for the PCI device (if any).
* Returns: 0 on success
* -ENXIO if there isn't a PCI device pointer
* (could be because the SCSI driver hasn't been
* updated yet, or because it isn't a SCSI
* device)
* any copy_to_user() error on failure there
*/
static int scsi_ioctl_get_pci(struct scsi_device *sdev, void __user *arg)
{
struct device *dev = scsi_get_device(sdev->host);
const char *name;
if (!dev)
return -ENXIO;
name = dev_name(dev);
/* compatibility with old ioctl which only returned
* 20 characters */
return copy_to_user(arg, name, min(strlen(name), (size_t)20))
? -EFAULT: 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds | 30 | 39.47% | 1 | 14.29% |
| Kay Sievers | 24 | 31.58% | 1 | 14.29% |
| James Bottomley | 14 | 18.42% | 2 | 28.57% |
| Randy Dunlap | 5 | 6.58% | 1 | 14.29% |
| Christoph Hellwig | 2 | 2.63% | 1 | 14.29% |
| Al Viro | 1 | 1.32% | 1 | 14.29% |
| Total | 76 | 100.00% | 7 | 100.00% |
/**
* scsi_ioctl - Dispatch ioctl to scsi device
* @sdev: scsi device receiving ioctl
* @cmd: which ioctl is it
* @arg: data associated with ioctl
*
* Description: The scsi_ioctl() function differs from most ioctls in that it
* does not take a major/minor number as the dev field. Rather, it takes
* a pointer to a &struct scsi_device.
*/
int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
char scsi_cmd[MAX_COMMAND_SIZE];
struct scsi_sense_hdr sense_hdr;
/* Check for deprecated ioctls ... all the ioctls which don't
* follow the new unique numbering scheme are deprecated */
switch (cmd) {
case SCSI_IOCTL_SEND_COMMAND:
case SCSI_IOCTL_TEST_UNIT_READY:
case SCSI_IOCTL_BENCHMARK_COMMAND:
case SCSI_IOCTL_SYNC:
case SCSI_IOCTL_START_UNIT:
case SCSI_IOCTL_STOP_UNIT:
printk(KERN_WARNING "program %s is using a deprecated SCSI "
"ioctl, please convert it to SG_IO\n", current->comm);
break;
default:
break;
}
switch (cmd) {
case SCSI_IOCTL_GET_IDLUN:
if (!access_ok(VERIFY_WRITE, arg, sizeof(struct scsi_idlun)))
return -EFAULT;
__put_user((sdev->id & 0xff)
+ ((sdev->lun & 0xff) << 8)
+ ((sdev->channel & 0xff) << 16)
+ ((sdev->host->host_no & 0xff) << 24),
&((struct scsi_idlun __user *)arg)->dev_id);
__put_user(sdev->host->unique_id,
&((struct scsi_idlun __user *)arg)->host_unique_id);
return 0;
case SCSI_IOCTL_GET_BUS_NUMBER:
return put_user(sdev->host->host_no, (int __user *)arg);
case SCSI_IOCTL_PROBE_HOST:
return ioctl_probe(sdev->host, arg);
case SCSI_IOCTL_SEND_COMMAND:
if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
return -EACCES;
return sg_scsi_ioctl(sdev->request_queue, NULL, 0, arg);
case SCSI_IOCTL_DOORLOCK:
return scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
case SCSI_IOCTL_DOORUNLOCK:
return scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
case SCSI_IOCTL_TEST_UNIT_READY:
return scsi_test_unit_ready(sdev, IOCTL_NORMAL_TIMEOUT,
NORMAL_RETRIES, &sense_hdr);
case SCSI_IOCTL_START_UNIT:
scsi_cmd[0] = START_STOP;
scsi_cmd[1] = 0;
scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[5] = 0;
scsi_cmd[4] = 1;
return ioctl_internal_command(sdev, scsi_cmd,
START_STOP_TIMEOUT, NORMAL_RETRIES);
case SCSI_IOCTL_STOP_UNIT:
scsi_cmd[0] = START_STOP;
scsi_cmd[1] = 0;
scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[5] = 0;
scsi_cmd[4] = 0;
return ioctl_internal_command(sdev, scsi_cmd,
START_STOP_TIMEOUT, NORMAL_RETRIES);
case SCSI_IOCTL_GET_PCI:
return scsi_ioctl_get_pci(sdev, arg);
case SG_SCSI_RESET:
return scsi_ioctl_reset(sdev, arg);
default:
if (sdev->host->hostt->ioctl)
return sdev->host->hostt->ioctl(sdev, cmd, arg);
}
return -EINVAL;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds (pre-git) | 323 | 72.10% | 19 | 55.88% |
| Christoph Hellwig | 48 | 10.71% | 4 | 11.76% |
| James Bottomley | 39 | 8.71% | 3 | 8.82% |
| Linus Torvalds | 22 | 4.91% | 2 | 5.88% |
| Al Viro | 6 | 1.34% | 2 | 5.88% |
| Alan Cox | 4 | 0.89% | 1 | 2.94% |
| Douglas Gilbert | 2 | 0.45% | 1 | 2.94% |
| Jesper Juhl | 2 | 0.45% | 1 | 2.94% |
| Patrick Mansfield | 2 | 0.45% | 1 | 2.94% |
| Total | 448 | 100.00% | 34 | 100.00% |
EXPORT_SYMBOL(scsi_ioctl);
/*
* We can process a reset even when a device isn't fully operable.
*/
int scsi_ioctl_block_when_processing_errors(struct scsi_device *sdev, int cmd,
bool ndelay)
{
if (cmd == SG_SCSI_RESET && ndelay) {
if (scsi_host_in_recovery(sdev->host))
return -EAGAIN;
} else {
if (!scsi_block_when_processing_errors(sdev))
return -ENODEV;
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| James Bottomley | 45 | 78.95% | 2 | 40.00% |
| Christoph Hellwig | 10 | 17.54% | 2 | 40.00% |
| Al Viro | 2 | 3.51% | 1 | 20.00% |
| Total | 57 | 100.00% | 5 | 100.00% |
EXPORT_SYMBOL_GPL(scsi_ioctl_block_when_processing_errors);
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds (pre-git) | 628 | 55.58% | 31 | 45.59% |
| James Bottomley | 123 | 10.88% | 10 | 14.71% |
| Alan Cox | 106 | 9.38% | 1 | 1.47% |
| Christoph Hellwig | 103 | 9.12% | 9 | 13.24% |
| Linus Torvalds | 55 | 4.87% | 4 | 5.88% |
| Douglas Gilbert | 34 | 3.01% | 1 | 1.47% |
| Kay Sievers | 24 | 2.12% | 1 | 1.47% |
| Hannes Reinecke | 24 | 2.12% | 2 | 2.94% |
| Al Viro | 11 | 0.97% | 3 | 4.41% |
| Adrian Bunk | 10 | 0.88% | 1 | 1.47% |
| Randy Dunlap | 5 | 0.44% | 1 | 1.47% |
| Patrick Mansfield | 2 | 0.18% | 1 | 1.47% |
| FUJITA Tomonori | 2 | 0.18% | 1 | 1.47% |
| Jesper Juhl | 2 | 0.18% | 1 | 1.47% |
| Rob Landley | 1 | 0.09% | 1 | 1.47% |
| Total | 1130 | 100.00% | 68 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.