Release 4.11 drivers/scsi/zalon.c

/*
 * Zalon 53c7xx device driver.
 * By Richard Hirst (rhirst@linuxcare.com)
 */

#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/types.h>
#include <asm/hardware.h>
#include <asm/io.h>

#include "../parisc/gsc.h"

#include "ncr53c8xx.h"

MODULE_AUTHOR("Richard Hirst");
MODULE_DESCRIPTION("Bluefish/Zalon 720 SCSI Driver");
MODULE_LICENSE("GPL");


#define GSC_SCSI_ZALON_OFFSET 0x800


#define IO_MODULE_EIM		(1*4)

#define IO_MODULE_DC_ADATA	(2*4)

#define IO_MODULE_II_CDATA	(3*4)

#define IO_MODULE_IO_COMMAND	(12*4)

#define IO_MODULE_IO_STATUS	(13*4)


#define IOSTATUS_RY		0x40

#define IOSTATUS_FE		0x80

#define IOIIDATA_SMINT5L	0x40000000

#define IOIIDATA_MINT5EN	0x20000000

#define IOIIDATA_PACKEN		0x10000000

#define IOIIDATA_PREFETCHEN	0x08000000

#define IOIIDATA_IOII		0x00000020


#define CMD_RESET		5


static struct ncr_chip zalon720_chip __initdata = {
	.revision_id =	0x0f,
	.burst_max =	3,
	.offset_max =	8,
	.nr_divisor =	4,
	.features =	FE_WIDE | FE_DIFF | FE_EHP| FE_MUX | FE_EA,
};



#if 0
/* FIXME:
 * Is this function dead code? or is someone planning on using it in the
 * future.  The clock = (int) pdc_result[16] does not look correct to
 * me ... I think it should be iodc_data[16].  Since this cause a compile
 * error with the new encapsulated PDC, I'm not compiling in this function.
 * - RB
 */
/* poke SCSI clock out of iodc data */

static u8 iodc_data[32] __attribute__ ((aligned (64)));
static unsigned long pdc_result[32] __attribute__ ((aligned (16))) ={0,0,0,0};

static int 
lasi_scsi_clock(void * hpa, int defaultclock)
{
        int clock, status;

        status = pdc_iodc_read(&pdc_result, hpa, 0, &iodc_data, 32 );
        if (status == PDC_RET_OK) {
                clock = (int) pdc_result[16];
        } else {
                printk(KERN_WARNING "%s: pdc_iodc_read returned %d\n", __func__, status);
                clock = defaultclock; 
        }

        printk(KERN_DEBUG "%s: SCSI clock %d\n", __func__, clock);
        return clock;
}
#endif


static struct scsi_host_template zalon7xx_template = {
	.module		= THIS_MODULE,
	.proc_name	= "zalon7xx",
};


static int __init

zalon_probe(struct parisc_device *dev)
{
	struct gsc_irq gsc_irq;
	u32 zalon_vers;
	int error = -ENODEV;
	void __iomem *zalon = ioremap_nocache(dev->hpa.start, 4096);
	void __iomem *io_port = zalon + GSC_SCSI_ZALON_OFFSET;
	static int unit = 0;
	struct Scsi_Host *host;
	struct ncr_device device;

	__raw_writel(CMD_RESET, zalon + IO_MODULE_IO_COMMAND);
	while (!(__raw_readl(zalon + IO_MODULE_IO_STATUS) & IOSTATUS_RY))
		cpu_relax();
	__raw_writel(IOIIDATA_MINT5EN | IOIIDATA_PACKEN | IOIIDATA_PREFETCHEN,
		zalon + IO_MODULE_II_CDATA);

	/* XXX: Save the Zalon version for bug workarounds? */
	zalon_vers = (__raw_readl(zalon + IO_MODULE_II_CDATA) >> 24) & 0x07;

	/* Setup the interrupts first.
        ** Later on request_irq() will register the handler.
        */
	dev->irq = gsc_alloc_irq(&gsc_irq);

	printk(KERN_INFO "%s: Zalon version %d, IRQ %d\n", __func__,
		zalon_vers, dev->irq);

	__raw_writel(gsc_irq.txn_addr | gsc_irq.txn_data, zalon + IO_MODULE_EIM);

	if (zalon_vers == 0)
		printk(KERN_WARNING "%s: Zalon 1.1 or earlier\n", __func__);

	memset(&device, 0, sizeof(struct ncr_device));

	/* The following three are needed before any other access. */
	__raw_writeb(0x20, io_port + 0x38); /* DCNTL_REG,  EA  */
	__raw_writeb(0x04, io_port + 0x1b); /* CTEST0_REG, EHP */
	__raw_writeb(0x80, io_port + 0x22); /* CTEST4_REG, MUX */

	/* Initialise ncr_device structure with items required by ncr_attach. */
	device.chip		= zalon720_chip;
	device.host_id		= 7;
	device.dev		= &dev->dev;
	device.slot.base	= dev->hpa.start + GSC_SCSI_ZALON_OFFSET;
	device.slot.base_v	= io_port;
	device.slot.irq		= dev->irq;
	device.differential	= 2;

	host = ncr_attach(&zalon7xx_template, unit, &device);
	if (!host)
		return -ENODEV;

	if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
	  dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ",
		     dev->irq);
		goto fail;
	}

	unit++;

	dev_set_drvdata(&dev->dev, host);

	error = scsi_add_host(host, &dev->dev);
	if (error)
		goto fail_free_irq;

	scsi_scan_host(host);
	return 0;

 fail_free_irq:
	free_irq(dev->irq, host);
 fail:
	ncr53c8xx_release(host);
	return error;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
James Bottomley
175
43.75%
2
14.29%
Richard Hirst
131
32.75%
1
7.14%
Matthew Wilcox
50
12.50%
4
28.57%
Christoph Hellwig
34
8.50%
2
14.29%
Helge Deller
4
1.00%
2
14.29%
Kay Sievers
3
0.75%
1
7.14%
Harvey Harrison
2
0.50%
1
7.14%
Thomas Gleixner
1
0.25%
1
7.14%
Total
400
100.00%
14
100.00%


static struct parisc_device_id zalon_tbl[] = {
	{ HPHW_A_DMA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00089 }, 
	{ 0, }
};

MODULE_DEVICE_TABLE(parisc, zalon_tbl);



static int __exit zalon_remove(struct parisc_device *dev)
{
	struct Scsi_Host *host = dev_get_drvdata(&dev->dev);

	scsi_remove_host(host);
	ncr53c8xx_release(host);
	free_irq(dev->irq, host);

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
James Bottomley
45
95.74%
1
50.00%
Matthew Wilcox
2
4.26%
1
50.00%
Total
47
100.00%
2
100.00%


static struct parisc_driver zalon_driver = {
	.name =		"zalon",
	.id_table =	zalon_tbl,
	.probe =	zalon_probe,
	.remove =	zalon_remove,
};



static int __init zalon7xx_init(void)
{
	int ret = ncr53c8xx_init();
	if (!ret)
		ret = register_parisc_driver(&zalon_driver);
	if (ret)
		ncr53c8xx_exit();
	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
James Bottomley
27
71.05%
2
66.67%
Richard Hirst
11
28.95%
1
33.33%
Total
38
100.00%
3
100.00%



static void __exit zalon7xx_exit(void)
{
	unregister_parisc_driver(&zalon_driver);
	ncr53c8xx_exit();
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Richard Hirst
10
55.56%
1
33.33%
James Bottomley
5
27.78%
1
33.33%
Matthew Wilcox
3
16.67%
1
33.33%
Total
18
100.00%
3
100.00%


module_init(zalon7xx_init);

module_exit(zalon7xx_exit);
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
James Bottomley
346
47.33%
5
27.78%
Richard Hirst
227
31.05%
1
5.56%
Matthew Wilcox
112
15.32%
5
27.78%
Christoph Hellwig
35
4.79%
2
11.11%
Helge Deller
4
0.55%
2
11.11%
Kay Sievers
3
0.41%
1
5.56%
Harvey Harrison
3
0.41%
1
5.56%
Thomas Gleixner
1
0.14%
1
5.56%
Total
731
100.00%
18
100.00%
Directory: drivers/scsi

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.