cregit-Linux how code gets into the kernel

Release 4.11 drivers/scsi/zorro7xx.c

Directory: drivers/scsi
/*
 * Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux.
 *              Amiga MacroSystemUS WarpEngine SCSI controller.
 *              Amiga Technologies/DKB A4091 SCSI controller.
 *
 * Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk>
 * plus modifications of the 53c7xx.c driver to support the Amiga.
 *
 * Rewritten to use 53c700.c by Kars de Jong <jongk@linux-m68k.org>
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/zorro.h>
#include <linux/slab.h>

#include <asm/amigahw.h>
#include <asm/amigaints.h>

#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_spi.h>

#include "53c700.h"

MODULE_AUTHOR("Alan Hourihane <alanh@fairlite.demon.co.uk> / Kars de Jong <jongk@linux-m68k.org>");
MODULE_DESCRIPTION("Amiga Zorro NCR53C710 driver");
MODULE_LICENSE("GPL");



static struct scsi_host_template zorro7xx_scsi_driver_template = {
	.proc_name	= "zorro7xx",
	.this_id	= 7,
	.module		= THIS_MODULE,
};


static struct zorro_driver_data {
	
const char *name;
	
unsigned long offset;
	
int absolute;	/* offset is absolute address */
} 
zorro7xx_driver_data[] = {
	{ .name = "PowerUP 603e+", .offset = 0xf40000, .absolute = 1 },
	{ .name = "WarpEngine 40xx", .offset = 0x40000 },
	{ .name = "A4091", .offset = 0x800000 },
	{ .name = "GForce 040/060", .offset = 0x40000 },
	{ 0 }
};


static struct zorro_device_id zorro7xx_zorro_tbl[] = {
	{
		.id = ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS,
		.driver_data = (unsigned long)&zorro7xx_driver_data[0],
        },
	{
		.id = ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx,
		.driver_data = (unsigned long)&zorro7xx_driver_data[1],
        },
	{
		.id = ZORRO_PROD_CBM_A4091_1,
		.driver_data = (unsigned long)&zorro7xx_driver_data[2],
        },
	{
		.id = ZORRO_PROD_CBM_A4091_2,
		.driver_data = (unsigned long)&zorro7xx_driver_data[2],
        },
	{
		.id = ZORRO_PROD_GVP_GFORCE_040_060,
		.driver_data = (unsigned long)&zorro7xx_driver_data[3],
        },
	{ 0 }
};
MODULE_DEVICE_TABLE(zorro, zorro7xx_zorro_tbl);


static int zorro7xx_init_one(struct zorro_dev *z, const struct zorro_device_id *ent) { struct Scsi_Host *host; struct NCR_700_Host_Parameters *hostdata; struct zorro_driver_data *zdd; unsigned long board, ioaddr; board = zorro_resource_start(z); zdd = (struct zorro_driver_data *)ent->driver_data; if (zdd->absolute) { ioaddr = zdd->offset; } else { ioaddr = board + zdd->offset; } if (!zorro_request_device(z, zdd->name)) { printk(KERN_ERR "zorro7xx: cannot reserve region 0x%lx, abort\n", board); return -EBUSY; } hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL); if (!hostdata) { printk(KERN_ERR "zorro7xx: Failed to allocate host data\n"); goto out_release; } /* Fill in the required pieces of hostdata */ if (ioaddr > 0x01000000) hostdata->base = ioremap(ioaddr, zorro_resource_len(z)); else hostdata->base = ZTWO_VADDR(ioaddr); hostdata->clock = 50; hostdata->chip710 = 1; /* Settings for at least WarpEngine 40xx */ hostdata->ctest7_extra = CTEST7_TT1; zorro7xx_scsi_driver_template.name = zdd->name; /* and register the chip */ host = NCR_700_detect(&zorro7xx_scsi_driver_template, hostdata, &z->dev); if (!host) { printk(KERN_ERR "zorro7xx: No host detected; " "board configuration problem?\n"); goto out_free; } host->this_id = 7; host->base = ioaddr; host->irq = IRQ_AMIGA_PORTS; if (request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "zorro7xx-scsi", host)) { printk(KERN_ERR "zorro7xx: request_irq failed\n"); goto out_put_host; } zorro_set_drvdata(z, host); scsi_scan_host(host); return 0; out_put_host: scsi_host_put(host); out_free: if (ioaddr > 0x01000000) iounmap(hostdata->base); kfree(hostdata); out_release: zorro_release_device(z); return -ENODEV; }

Contributors

PersonTokensPropCommitsCommitProp
Kars de Jong31797.24%133.33%
Matthew Wilcox72.15%133.33%
Mariusz Kozlowski20.61%133.33%
Total326100.00%3100.00%


static void zorro7xx_remove_one(struct zorro_dev *z) { struct Scsi_Host *host = zorro_get_drvdata(z); struct NCR_700_Host_Parameters *hostdata = shost_priv(host); scsi_remove_host(host); NCR_700_release(host); kfree(hostdata); free_irq(host->irq, host); zorro_release_device(z); }

Contributors

PersonTokensPropCommitsCommitProp
Kars de Jong5998.33%150.00%
Matthew Wilcox11.67%150.00%
Total60100.00%2100.00%

static struct zorro_driver zorro7xx_driver = { .name = "zorro7xx-scsi", .id_table = zorro7xx_zorro_tbl, .probe = zorro7xx_init_one, .remove = zorro7xx_remove_one, };
static int __init zorro7xx_scsi_init(void) { return zorro_register_driver(&zorro7xx_driver); }

Contributors

PersonTokensPropCommitsCommitProp
Kars de Jong16100.00%1100.00%
Total16100.00%1100.00%


static void __exit zorro7xx_scsi_exit(void) { zorro_unregister_driver(&zorro7xx_driver); }

Contributors

PersonTokensPropCommitsCommitProp
Kars de Jong15100.00%1100.00%
Total15100.00%1100.00%

module_init(zorro7xx_scsi_init); module_exit(zorro7xx_scsi_exit);

Overall Contributors

PersonTokensPropCommitsCommitProp
Kars de Jong69896.81%116.67%
Geert Uytterhoeven101.39%233.33%
Matthew Wilcox81.11%116.67%
Tejun Heo30.42%116.67%
Mariusz Kozlowski20.28%116.67%
Greg Kroah-Hartman0.00%00.00%
Total721100.00%6100.00%
Directory: drivers/scsi
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.