Release 4.11 drivers/spi/spi-sun6i.c

/*
 * Copyright (C) 2012 - 2014 Allwinner Tech
 * Pan Nan <pannan@allwinnertech.com>
 *
 * Copyright (C) 2014 Maxime Ripard
 * Maxime Ripard <maxime.ripard@free-electrons.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 */

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>

#include <linux/spi/spi.h>


#define SUN6I_FIFO_DEPTH		128

#define SUN8I_FIFO_DEPTH		64


#define SUN6I_GBL_CTL_REG		0x04

#define SUN6I_GBL_CTL_BUS_ENABLE		BIT(0)

#define SUN6I_GBL_CTL_MASTER			BIT(1)

#define SUN6I_GBL_CTL_TP			BIT(7)

#define SUN6I_GBL_CTL_RST			BIT(31)


#define SUN6I_TFR_CTL_REG		0x08

#define SUN6I_TFR_CTL_CPHA			BIT(0)

#define SUN6I_TFR_CTL_CPOL			BIT(1)

#define SUN6I_TFR_CTL_SPOL			BIT(2)

#define SUN6I_TFR_CTL_CS_MASK			0x30

#define SUN6I_TFR_CTL_CS(cs)			(((cs) << 4) & SUN6I_TFR_CTL_CS_MASK)

#define SUN6I_TFR_CTL_CS_MANUAL			BIT(6)

#define SUN6I_TFR_CTL_CS_LEVEL			BIT(7)

#define SUN6I_TFR_CTL_DHB			BIT(8)

#define SUN6I_TFR_CTL_FBS			BIT(12)

#define SUN6I_TFR_CTL_XCH			BIT(31)


#define SUN6I_INT_CTL_REG		0x10

#define SUN6I_INT_CTL_RF_OVF			BIT(8)

#define SUN6I_INT_CTL_TC			BIT(12)


#define SUN6I_INT_STA_REG		0x14


#define SUN6I_FIFO_CTL_REG		0x18

#define SUN6I_FIFO_CTL_RF_RST			BIT(15)

#define SUN6I_FIFO_CTL_TF_RST			BIT(31)


#define SUN6I_FIFO_STA_REG		0x1c

#define SUN6I_FIFO_STA_RF_CNT_MASK		0x7f

#define SUN6I_FIFO_STA_RF_CNT_BITS		0

#define SUN6I_FIFO_STA_TF_CNT_MASK		0x7f

#define SUN6I_FIFO_STA_TF_CNT_BITS		16


#define SUN6I_CLK_CTL_REG		0x24

#define SUN6I_CLK_CTL_CDR2_MASK			0xff

#define SUN6I_CLK_CTL_CDR2(div)			(((div) & SUN6I_CLK_CTL_CDR2_MASK) << 0)

#define SUN6I_CLK_CTL_CDR1_MASK			0xf

#define SUN6I_CLK_CTL_CDR1(div)			(((div) & SUN6I_CLK_CTL_CDR1_MASK) << 8)

#define SUN6I_CLK_CTL_DRS			BIT(12)


#define SUN6I_BURST_CNT_REG		0x30

#define SUN6I_BURST_CNT(cnt)			((cnt) & 0xffffff)


#define SUN6I_XMIT_CNT_REG		0x34

#define SUN6I_XMIT_CNT(cnt)			((cnt) & 0xffffff)


#define SUN6I_BURST_CTL_CNT_REG		0x38

#define SUN6I_BURST_CTL_CNT_STC(cnt)		((cnt) & 0xffffff)


#define SUN6I_TXDATA_REG		0x200

#define SUN6I_RXDATA_REG		0x300


struct sun6i_spi {
	
struct spi_master	*master;
	
void __iomem		*base_addr;
	
struct clk		*hclk;
	
struct clk		*mclk;
	
struct reset_control	*rstc;

	
struct completion	done;

	
const u8		*tx_buf;
	
u8			*rx_buf;
	
int			len;
	
unsigned long		fifo_depth;
};



static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg)
{
	return readl(sspi->base_addr + reg);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Maxime Ripard
25
100.00%
1
100.00%
Total
25
100.00%
1
100.00%



static inline void sun6i_spi_write(struct sun6i_spi *sspi, u32 reg, u32 value)
{
	writel(value, sspi->base_addr + reg);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Maxime Ripard
29
100.00%
1
100.00%
Total
29
100.00%
1
100.00%



static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len)
{
	u32 reg, cnt;
	u8 byte;

	/* See how much data is available */
	reg = sun6i_spi_read(sspi, SUN6I_FIFO_STA_REG);
	reg &= SUN6I_FIFO_STA_RF_CNT_MASK;
	cnt = reg >> SUN6I_FIFO_STA_RF_CNT_BITS;

	if (len > cnt)
		len = cnt;

	while (len--) {
		byte = readb(sspi->base_addr + SUN6I_RXDATA_REG);
		if (sspi->rx_buf)
			*sspi->rx_buf++ = byte;
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Maxime Ripard
85
100.00%
1
100.00%
Total
85
100.00%
1
100.00%



static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi, int len)
{
	u8 byte;

	if (len > sspi->len)
		len = sspi->len;

	while (len--) {
		byte = sspi->tx_buf ? *sspi->tx_buf++ : 0;
		writeb(byte, sspi->base_addr + SUN6I_TXDATA_REG);
		sspi->len--;
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Maxime Ripard
69
100.00%
1
100.00%
Total
69
100.00%
1
100.00%



static void sun6i_spi_set_cs(struct spi_device *spi, bool enable)
{
	struct sun6i_spi *sspi = spi_master_get_devdata(spi->master);
	u32 reg;

	reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
	reg &= ~SUN6I_TFR_CTL_CS_MASK;
	reg |= SUN6I_TFR_CTL_CS(spi->chip_select);

	if (enable)
		reg |= SUN6I_TFR_CTL_CS_LEVEL;
	else
		reg &= ~SUN6I_TFR_CTL_CS_LEVEL;

	sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Maxime Ripard
75
100.00%
1
100.00%
Total
75
100.00%
1
100.00%



static size_t sun6i_spi_max_transfer_size(struct spi_device *spi)
{
	struct sun6i_spi *sspi = spi_master_get_devdata(spi->master);

	return sspi->fifo_depth - 1;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Michal Suchanek
15
50.00%
1
50.00%
Kim (Woogyom) Milo
15
50.00%
1
50.00%
Total
30
100.00%
2
100.00%



static int sun6i_spi_transfer_one(struct spi_master *master,
				  struct spi_device *spi,
				  struct spi_transfer *tfr)
{
	struct sun6i_spi *sspi = spi_master_get_devdata(master);
	unsigned int mclk_rate, div, timeout;
	unsigned int start, end, tx_time;
	unsigned int tx_len = 0;
	int ret = 0;
	u32 reg;

	/* We don't support transfer larger than the FIFO */
	if (tfr->len > sspi->fifo_depth)
		return -EINVAL;

	reinit_completion(&sspi->done);
	sspi->tx_buf = tfr->tx_buf;
	sspi->rx_buf = tfr->rx_buf;
	sspi->len = tfr->len;

	/* Clear pending interrupts */
	sun6i_spi_write(sspi, SUN6I_INT_STA_REG, ~0);

	/* Reset FIFO */
	sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG,
			SUN6I_FIFO_CTL_RF_RST | SUN6I_FIFO_CTL_TF_RST);

	/*
         * Setup the transfer control register: Chip Select,
         * polarities, etc.
         */
	reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);

	if (spi->mode & SPI_CPOL)
		reg |= SUN6I_TFR_CTL_CPOL;
	else
		reg &= ~SUN6I_TFR_CTL_CPOL;

	if (spi->mode & SPI_CPHA)
		reg |= SUN6I_TFR_CTL_CPHA;
	else
		reg &= ~SUN6I_TFR_CTL_CPHA;

	if (spi->mode & SPI_LSB_FIRST)
		reg |= SUN6I_TFR_CTL_FBS;
	else
		reg &= ~SUN6I_TFR_CTL_FBS;

	/*
         * If it's a TX only transfer, we don't want to fill the RX
         * FIFO with bogus data
         */
	if (sspi->rx_buf)
		reg &= ~SUN6I_TFR_CTL_DHB;
	else
		reg |= SUN6I_TFR_CTL_DHB;

	/* We want to control the chip select manually */
	reg |= SUN6I_TFR_CTL_CS_MANUAL;

	sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);

	/* Ensure that we have a parent clock fast enough */
	mclk_rate = clk_get_rate(sspi->mclk);
	if (mclk_rate < (2 * tfr->speed_hz)) {
		clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
		mclk_rate = clk_get_rate(sspi->mclk);
	}

	/*
         * Setup clock divider.
         *
         * We have two choices there. Either we can use the clock
         * divide rate 1, which is calculated thanks to this formula:
         * SPI_CLK = MOD_CLK / (2 ^ cdr)
         * Or we can use CDR2, which is calculated with the formula:
         * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
         * Wether we use the former or the latter is set through the
         * DRS bit.
         *
         * First try CDR2, and if we can't reach the expected
         * frequency, fall back to CDR1.
         */
	div = mclk_rate / (2 * tfr->speed_hz);
	if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
		if (div > 0)
			div--;

		reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS;
	} else {
		div = ilog2(mclk_rate) - ilog2(tfr->speed_hz);
		reg = SUN6I_CLK_CTL_CDR1(div);
	}

	sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);

	/* Setup the transfer now... */
	if (sspi->tx_buf)
		tx_len = tfr->len;

	/* Setup the counters */
	sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, SUN6I_BURST_CNT(tfr->len));
	sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, SUN6I_XMIT_CNT(tx_len));
	sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG,
			SUN6I_BURST_CTL_CNT_STC(tx_len));

	/* Fill the TX FIFO */
	sun6i_spi_fill_fifo(sspi, sspi->fifo_depth);

	/* Enable the interrupts */
	sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC);

	/* Start the transfer */
	reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
	sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH);

	tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
	start = jiffies;
	timeout = wait_for_completion_timeout(&sspi->done,
					      msecs_to_jiffies(tx_time));
	end = jiffies;
	if (!timeout) {
		dev_warn(&master->dev,
			 "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
			 dev_name(&spi->dev), tfr->len, tfr->speed_hz,
			 jiffies_to_msecs(end - start), tx_time);
		ret = -ETIMEDOUT;
		goto out;
	}

	sun6i_spi_drain_fifo(sspi, sspi->fifo_depth);

out:
	sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0);

	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Maxime Ripard
468
83.57%
1
25.00%
Michal Suchanek
75
13.39%
1
25.00%
Kim (Woogyom) Milo
9
1.61%
1
25.00%
Marcus Weseloh
8
1.43%
1
25.00%
Total
560
100.00%
4
100.00%



static irqreturn_t sun6i_spi_handler(int irq, void *dev_id)
{
	struct sun6i_spi *sspi = dev_id;
	u32 status = sun6i_spi_read(sspi, SUN6I_INT_STA_REG);

	/* Transfer complete */
	if (status & SUN6I_INT_CTL_TC) {
		sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC);
		complete(&sspi->done);
		return IRQ_HANDLED;
	}

	return IRQ_NONE;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Maxime Ripard
62
100.00%
1
100.00%
Total
62
100.00%
1
100.00%



static int sun6i_spi_runtime_resume(struct device *dev)
{
	struct spi_master *master = dev_get_drvdata(dev);
	struct sun6i_spi *sspi = spi_master_get_devdata(master);
	int ret;

	ret = clk_prepare_enable(sspi->hclk);
	if (ret) {
		dev_err(dev, "Couldn't enable AHB clock\n");
		goto out;
	}

	ret = clk_prepare_enable(sspi->mclk);
	if (ret) {
		dev_err(dev, "Couldn't enable module clock\n");
		goto err;
	}

	ret = reset_control_deassert(sspi->rstc);
	if (ret) {
		dev_err(dev, "Couldn't deassert the device from reset\n");
		goto err2;
	}

	sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG,
			SUN6I_GBL_CTL_BUS_ENABLE | SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP);

	return 0;

err2:
	clk_disable_unprepare(sspi->mclk);
err:
	clk_disable_unprepare(sspi->hclk);
out:
	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Maxime Ripard
148
100.00%
1
100.00%
Total
148
100.00%
1
100.00%



static int sun6i_spi_runtime_suspend(struct device *dev)
{
	struct spi_master *master = dev_get_drvdata(dev);
	struct sun6i_spi *sspi = spi_master_get_devdata(master);

	reset_control_assert(sspi->rstc);
	clk_disable_unprepare(sspi->mclk);
	clk_disable_unprepare(sspi->hclk);

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Maxime Ripard
55
100.00%
1
100.00%
Total
55
100.00%
1
100.00%



static int sun6i_spi_probe(struct platform_device *pdev)
{
	struct spi_master *master;
	struct sun6i_spi *sspi;
	struct resource	*res;
	int ret = 0, irq;

	master = spi_alloc_master(&pdev->dev, sizeof(struct sun6i_spi));
	if (!master) {
		dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
		return -ENOMEM;
	}

	platform_set_drvdata(pdev, master);
	sspi = spi_master_get_devdata(master);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	sspi->base_addr = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(sspi->base_addr)) {
		ret = PTR_ERR(sspi->base_addr);
		goto err_free_master;
	}

	irq = platform_get_irq(pdev, 0);
	if (irq < 0) {
		dev_err(&pdev->dev, "No spi IRQ specified\n");
		ret = -ENXIO;
		goto err_free_master;
	}

	ret = devm_request_irq(&pdev->dev, irq, sun6i_spi_handler,
			       0, "sun6i-spi", sspi);
	if (ret) {
		dev_err(&pdev->dev, "Cannot request IRQ\n");
		goto err_free_master;
	}

	sspi->master = master;
	sspi->fifo_depth = (unsigned long)of_device_get_match_data(&pdev->dev);

	master->max_speed_hz = 100 * 1000 * 1000;
	master->min_speed_hz = 3 * 1000;
	master->set_cs = sun6i_spi_set_cs;
	master->transfer_one = sun6i_spi_transfer_one;
	master->num_chipselect = 4;
	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
	master->bits_per_word_mask = SPI_BPW_MASK(8);
	master->dev.of_node = pdev->dev.of_node;
	master->auto_runtime_pm = true;
	master->max_transfer_size = sun6i_spi_max_transfer_size;

	sspi->hclk = devm_clk_get(&pdev->dev, "ahb");
	if (IS_ERR(sspi->hclk)) {
		dev_err(&pdev->dev, "Unable to acquire AHB clock\n");
		ret = PTR_ERR(sspi->hclk);
		goto err_free_master;
	}

	sspi->mclk = devm_clk_get(&pdev->dev, "mod");
	if (IS_ERR(sspi->mclk)) {
		dev_err(&pdev->dev, "Unable to acquire module clock\n");
		ret = PTR_ERR(sspi->mclk);
		goto err_free_master;
	}

	init_completion(&sspi->done);

	sspi->rstc = devm_reset_control_get(&pdev->dev, NULL);
	if (IS_ERR(sspi->rstc)) {
		dev_err(&pdev->dev, "Couldn't get reset controller\n");
		ret = PTR_ERR(sspi->rstc);
		goto err_free_master;
	}

	/*
         * This wake-up/shutdown pattern is to be able to have the
         * device woken up, even if runtime_pm is disabled
         */
	ret = sun6i_spi_runtime_resume(&pdev->dev);
	if (ret) {
		dev_err(&pdev->dev, "Couldn't resume the device\n");
		goto err_free_master;
	}

	pm_runtime_set_active(&pdev->dev);
	pm_runtime_enable(&pdev->dev);
	pm_runtime_idle(&pdev->dev);

	ret = devm_spi_register_master(&pdev->dev, master);
	if (ret) {
		dev_err(&pdev->dev, "cannot register SPI master\n");
		goto err_pm_disable;
	}

	return 0;

err_pm_disable:
	pm_runtime_disable(&pdev->dev);
	sun6i_spi_runtime_suspend(&pdev->dev);
err_free_master:
	spi_master_put(master);
	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Maxime Ripard
525
91.46%
1
20.00%
Michal Suchanek
24
4.18%
2
40.00%
Kim (Woogyom) Milo
16
2.79%
1
20.00%
Axel Lin
9
1.57%
1
20.00%
Total
574
100.00%
5
100.00%



static int sun6i_spi_remove(struct platform_device *pdev)
{
	pm_runtime_disable(&pdev->dev);

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Maxime Ripard
22
100.00%
1
100.00%
Total
22
100.00%
1
100.00%


static const struct of_device_id sun6i_spi_match[] = {
	{ .compatible = "allwinner,sun6i-a31-spi", .data = (void *)SUN6I_FIFO_DEPTH },
	{ .compatible = "allwinner,sun8i-h3-spi",  .data = (void *)SUN8I_FIFO_DEPTH },
	{}
};
MODULE_DEVICE_TABLE(of, sun6i_spi_match);


static const struct dev_pm_ops sun6i_spi_pm_ops = {
	.runtime_resume		= sun6i_spi_runtime_resume,
	.runtime_suspend	= sun6i_spi_runtime_suspend,
};


static struct platform_driver sun6i_spi_driver = {
	.probe	= sun6i_spi_probe,
	.remove	= sun6i_spi_remove,
	.driver	= {
		.name		= "sun6i-spi",
		.of_match_table	= sun6i_spi_match,
		.pm		= &sun6i_spi_pm_ops,
        },
};

module_platform_driver(sun6i_spi_driver);

MODULE_AUTHOR("Pan Nan <pannan@allwinnertech.com>");
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
MODULE_DESCRIPTION("Allwinner A31 SPI controller driver");
MODULE_LICENSE("GPL");
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Maxime Ripard
1933
90.20%
1
12.50%
Michal Suchanek
114
5.32%
3
37.50%
Kim (Woogyom) Milo
77
3.59%
1
12.50%
Axel Lin
11
0.51%
2
25.00%
Marcus Weseloh
8
0.37%
1
12.50%
Total
2143
100.00%
8
100.00%
Directory: drivers/spi

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.