cregit-Linux how code gets into the kernel

Release 4.11 drivers/staging/fbtft/fb_ili9320.c

/*
 * FB driver for the ILI9320 LCD Controller
 *
 * Copyright (C) 2013 Noralf Tronnes
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>

#include "fbtft.h"


#define DRVNAME		"fb_ili9320"

#define WIDTH		240

#define HEIGHT		320

#define DEFAULT_GAMMA	"07 07 6 0 0 0 5 5 4 0\n" \
                        "07 08 4 7 5 1 2 0 7 7"


static unsigned int read_devicecode(struct fbtft_par *par) { int ret; u8 rxbuf[8] = {0, }; write_reg(par, 0x0000); ret = par->fbtftops.read(par, rxbuf, 4); return (rxbuf[2] << 8) | rxbuf[3]; }

Contributors

PersonTokensPropCommitsCommitProp
Thomas Petazzoni6198.39%150.00%
Ming Yang11.61%150.00%
Total62100.00%2100.00%


static int init_display(struct fbtft_par *par) { unsigned int devcode; par->fbtftops.reset(par); devcode = read_devicecode(par); fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "Device code: 0x%04X\n", devcode); if ((devcode != 0x0000) && (devcode != 0x9320)) dev_warn(par->info->device, "Unrecognized Device code: 0x%04X (expected 0x9320)\n", devcode); /* Initialization sequence from ILI9320 Application Notes */ /* *********** Start Initial Sequence ********* */ /* Set the Vcore voltage and this setting is must. */ write_reg(par, 0x00E5, 0x8000); /* Start internal OSC. */ write_reg(par, 0x0000, 0x0001); /* set SS and SM bit */ write_reg(par, 0x0001, 0x0100); /* set 1 line inversion */ write_reg(par, 0x0002, 0x0700); /* Resize register */ write_reg(par, 0x0004, 0x0000); /* set the back and front porch */ write_reg(par, 0x0008, 0x0202); /* set non-display area refresh cycle */ write_reg(par, 0x0009, 0x0000); /* FMARK function */ write_reg(par, 0x000A, 0x0000); /* RGB interface setting */ write_reg(par, 0x000C, 0x0000); /* Frame marker Position */ write_reg(par, 0x000D, 0x0000); /* RGB interface polarity */ write_reg(par, 0x000F, 0x0000); /* ***********Power On sequence *************** */ /* SAP, BT[3:0], AP, DSTB, SLP, STB */ write_reg(par, 0x0010, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */ write_reg(par, 0x0011, 0x0007); /* VREG1OUT voltage */ write_reg(par, 0x0012, 0x0000); /* VDV[4:0] for VCOM amplitude */ write_reg(par, 0x0013, 0x0000); /* Dis-charge capacitor power voltage */ mdelay(200); /* SAP, BT[3:0], AP, DSTB, SLP, STB */ write_reg(par, 0x0010, 0x17B0); /* R11h=0x0031 at VCI=3.3V DC1[2:0], DC0[2:0], VC[2:0] */ write_reg(par, 0x0011, 0x0031); mdelay(50); /* R12h=0x0138 at VCI=3.3V VREG1OUT voltage */ write_reg(par, 0x0012, 0x0138); mdelay(50); /* R13h=0x1800 at VCI=3.3V VDV[4:0] for VCOM amplitude */ write_reg(par, 0x0013, 0x1800); /* R29h=0x0008 at VCI=3.3V VCM[4:0] for VCOMH */ write_reg(par, 0x0029, 0x0008); mdelay(50); /* GRAM horizontal Address */ write_reg(par, 0x0020, 0x0000); /* GRAM Vertical Address */ write_reg(par, 0x0021, 0x0000); /* ------------------ Set GRAM area --------------- */ /* Horizontal GRAM Start Address */ write_reg(par, 0x0050, 0x0000); /* Horizontal GRAM End Address */ write_reg(par, 0x0051, 0x00EF); /* Vertical GRAM Start Address */ write_reg(par, 0x0052, 0x0000); /* Vertical GRAM End Address */ write_reg(par, 0x0053, 0x013F); /* Gate Scan Line */ write_reg(par, 0x0060, 0x2700); /* NDL,VLE, REV */ write_reg(par, 0x0061, 0x0001); /* set scrolling line */ write_reg(par, 0x006A, 0x0000); /* -------------- Partial Display Control --------- */ write_reg(par, 0x0080, 0x0000); write_reg(par, 0x0081, 0x0000); write_reg(par, 0x0082, 0x0000); write_reg(par, 0x0083, 0x0000); write_reg(par, 0x0084, 0x0000); write_reg(par, 0x0085, 0x0000); /* -------------- Panel Control ------------------- */ write_reg(par, 0x0090, 0x0010); write_reg(par, 0x0092, 0x0000); write_reg(par, 0x0093, 0x0003); write_reg(par, 0x0095, 0x0110); write_reg(par, 0x0097, 0x0000); write_reg(par, 0x0098, 0x0000); write_reg(par, 0x0007, 0x0173); /* 262K color and display ON */ return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Thomas Petazzoni47693.89%125.00%
Anton Gerasimov305.92%250.00%
Ming Yang10.20%125.00%
Total507100.00%4100.00%


static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) { switch (par->info->var.rotate) { /* R20h = Horizontal GRAM Start Address */ /* R21h = Vertical GRAM Start Address */ case 0: write_reg(par, 0x0020, xs); write_reg(par, 0x0021, ys); break; case 180: write_reg(par, 0x0020, WIDTH - 1 - xs); write_reg(par, 0x0021, HEIGHT - 1 - ys); break; case 270: write_reg(par, 0x0020, WIDTH - 1 - ys); write_reg(par, 0x0021, xs); break; case 90: write_reg(par, 0x0020, ys); write_reg(par, 0x0021, HEIGHT - 1 - xs); break; } write_reg(par, 0x0022); /* Write Data to GRAM */ }

Contributors

PersonTokensPropCommitsCommitProp
Thomas Petazzoni149100.00%1100.00%
Total149100.00%1100.00%


static int set_var(struct fbtft_par *par) { switch (par->info->var.rotate) { case 0: write_reg(par, 0x3, (par->bgr << 12) | 0x30); break; case 270: write_reg(par, 0x3, (par->bgr << 12) | 0x28); break; case 180: write_reg(par, 0x3, (par->bgr << 12) | 0x00); break; case 90: write_reg(par, 0x3, (par->bgr << 12) | 0x18); break; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Thomas Petazzoni110100.00%1100.00%
Total110100.00%1100.00%

/* * Gamma string format: * VRP0 VRP1 RP0 RP1 KP0 KP1 KP2 KP3 KP4 KP5 * VRN0 VRN1 RN0 RN1 KN0 KN1 KN2 KN3 KN4 KN5 */ #define CURVE(num, idx) curves[num * par->gamma.num_values + idx]
static int set_gamma(struct fbtft_par *par, u32 *curves) { unsigned long mask[] = { 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, }; int i, j; /* apply mask */ for (i = 0; i < 2; i++) for (j = 0; j < 10; j++) CURVE(i, j) &= mask[i * par->gamma.num_values + j]; write_reg(par, 0x0030, CURVE(0, 5) << 8 | CURVE(0, 4)); write_reg(par, 0x0031, CURVE(0, 7) << 8 | CURVE(0, 6)); write_reg(par, 0x0032, CURVE(0, 9) << 8 | CURVE(0, 8)); write_reg(par, 0x0035, CURVE(0, 3) << 8 | CURVE(0, 2)); write_reg(par, 0x0036, CURVE(0, 1) << 8 | CURVE(0, 0)); write_reg(par, 0x0037, CURVE(1, 5) << 8 | CURVE(1, 4)); write_reg(par, 0x0038, CURVE(1, 7) << 8 | CURVE(1, 6)); write_reg(par, 0x0039, CURVE(1, 9) << 8 | CURVE(1, 8)); write_reg(par, 0x003C, CURVE(1, 3) << 8 | CURVE(1, 2)); write_reg(par, 0x003D, CURVE(1, 1) << 8 | CURVE(1, 0)); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Thomas Petazzoni32593.66%133.33%
Geert Uytterhoeven216.05%133.33%
Arnd Bergmann10.29%133.33%
Total347100.00%3100.00%

#undef CURVE static struct fbtft_display display = { .regwidth = 16, .width = WIDTH, .height = HEIGHT, .gamma_num = 2, .gamma_len = 10, .gamma = DEFAULT_GAMMA, .fbtftops = { .init_display = init_display, .set_addr_win = set_addr_win, .set_var = set_var, .set_gamma = set_gamma, }, }; FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9320", &display); MODULE_ALIAS("spi:" DRVNAME); MODULE_ALIAS("platform:" DRVNAME); MODULE_ALIAS("spi:ili9320"); MODULE_ALIAS("platform:ili9320"); MODULE_DESCRIPTION("FB driver for the ILI9320 LCD Controller"); MODULE_AUTHOR("Noralf Tronnes"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
Thomas Petazzoni127895.73%111.11%
Anton Gerasimov302.25%222.22%
Geert Uytterhoeven211.57%111.11%
Ming Yang20.15%111.11%
Anish Bhatt20.15%222.22%
Eva Rachel Retuya10.07%111.11%
Arnd Bergmann10.07%111.11%
Total1335100.00%9100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.