Release 4.11 drivers/staging/fbtft/fb_ssd1325.c
/*
* FB driver for the SSD1325 OLED Controller
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include "fbtft.h"
#define DRVNAME "fb_ssd1325"
#define WIDTH 128
#define HEIGHT 64
#define GAMMA_NUM 1
#define GAMMA_LEN 15
#define DEFAULT_GAMMA "7 1 1 1 1 2 2 3 3 4 4 5 5 6 6"
/*
* write_reg() caveat:
*
* This doesn't work because D/C has to be LOW for both values:
* write_reg(par, val1, val2);
*
* Do it like this:
* write_reg(par, val1);
* write_reg(par, val2);
*/
/* Init sequence taken from the Adafruit SSD1306 Arduino library */
static int init_display(struct fbtft_par *par)
{
par->fbtftops.reset(par);
gpio_set_value(par->gpio.cs, 0);
write_reg(par, 0xb3);
write_reg(par, 0xf0);
write_reg(par, 0xae);
write_reg(par, 0xa1);
write_reg(par, 0x00);
write_reg(par, 0xa8);
write_reg(par, 0x3f);
write_reg(par, 0xa0);
write_reg(par, 0x45);
write_reg(par, 0xa2);
write_reg(par, 0x40);
write_reg(par, 0x75);
write_reg(par, 0x00);
write_reg(par, 0x3f);
write_reg(par, 0x15);
write_reg(par, 0x00);
write_reg(par, 0x7f);
write_reg(par, 0xa4);
write_reg(par, 0xaf);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alexey Mednyy | 167 | 100.00% | 1 | 100.00% |
| Total | 167 | 100.00% | 1 | 100.00% |
static uint8_t rgb565_to_g16(u16 pixel)
{
u16 b = pixel & 0x1f;
u16 g = (pixel & (0x3f << 5)) >> 5;
u16 r = (pixel & (0x1f << (5 + 6))) >> (5 + 6);
pixel = (299 * r + 587 * g + 114 * b) / 195;
if (pixel > 255)
pixel = 255;
return (uint8_t)pixel / 16;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alexey Mednyy | 90 | 100.00% | 1 | 100.00% |
| Total | 90 | 100.00% | 1 | 100.00% |
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
fbtft_par_dbg(DEBUG_SET_ADDR_WIN, par,
"%s(xs=%d, ys=%d, xe=%d, ye=%d)\n", __func__, xs, ys, xe,
ye);
write_reg(par, 0x75);
write_reg(par, 0x00);
write_reg(par, 0x3f);
write_reg(par, 0x15);
write_reg(par, 0x00);
write_reg(par, 0x7f);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alexey Mednyy | 84 | 100.00% | 1 | 100.00% |
| Total | 84 | 100.00% | 1 | 100.00% |
static int blank(struct fbtft_par *par, bool on)
{
fbtft_par_dbg(DEBUG_BLANK, par, "%s(blank=%s)\n",
__func__, on ? "true" : "false");
if (on)
write_reg(par, 0xAE);
else
write_reg(par, 0xAF);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alexey Mednyy | 53 | 100.00% | 1 | 100.00% |
| Total | 53 | 100.00% | 1 | 100.00% |
/*
* Grayscale Lookup Table
* GS1 - GS15
* The "Gamma curve" contains the relative values between the entries
* in the Lookup table.
*
* 0 = Setting of GS1 < Setting of GS2 < Setting of GS3.....<
* Setting of GS14 < Setting of GS15
*/
static int set_gamma(struct fbtft_par *par, u32 *curves)
{
int i;
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
for (i = 0; i < GAMMA_LEN; i++) {
if (i > 0 && curves[i] < 1) {
dev_err(par->info->device,
"Illegal value in Grayscale Lookup Table at index %d.\n"
"Must be greater than 0\n", i);
return -EINVAL;
}
if (curves[i] > 7) {
dev_err(par->info->device,
"Illegal value(s) in Grayscale Lookup Table.\n"
"At index=%d, the accumulated value has exceeded 7\n",
i);
return -EINVAL;
}
}
write_reg(par, 0xB8);
for (i = 0; i < 8; i++)
write_reg(par, (curves[i] & 0xFF));
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alexey Mednyy | 142 | 99.30% | 1 | 50.00% |
| Arnd Bergmann | 1 | 0.70% | 1 | 50.00% |
| Total | 143 | 100.00% | 2 | 100.00% |
static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
{
u16 *vmem16 = (u16 *)par->info->screen_buffer;
u8 *buf = par->txbuf.buf;
u8 n1;
u8 n2;
int y, x;
int ret;
for (x = 0; x < par->info->var.xres; x++) {
if (x % 2)
continue;
for (y = 0; y < par->info->var.yres; y++) {
n1 = rgb565_to_g16(vmem16[y * par->info->var.xres + x]);
n2 = rgb565_to_g16(vmem16
[y * par->info->var.xres + x + 1]);
*buf = (n1 << 4) | n2;
buf++;
}
}
gpio_set_value(par->gpio.dc, 1);
/* Write data */
ret = par->fbtftops.write(par, par->txbuf.buf,
par->info->var.xres * par->info->var.yres / 2);
if (ret < 0)
dev_err(par->info->device,
"%s: write failed and returned: %d\n", __func__, ret);
return ret;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alexey Mednyy | 231 | 100.00% | 1 | 100.00% |
| Total | 231 | 100.00% | 1 | 100.00% |
static struct fbtft_display display = {
.regwidth = 8,
.width = WIDTH,
.height = HEIGHT,
.txbuflen = WIDTH * HEIGHT / 2,
.gamma_num = GAMMA_NUM,
.gamma_len = GAMMA_LEN,
.gamma = DEFAULT_GAMMA,
.fbtftops = {
.write_vmem = write_vmem,
.init_display = init_display,
.set_addr_win = set_addr_win,
.blank = blank,
.set_gamma = set_gamma,
},
};
FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1325", &display);
MODULE_ALIAS("spi:" DRVNAME);
MODULE_ALIAS("platform:" DRVNAME);
MODULE_ALIAS("spi:ssd1325");
MODULE_ALIAS("platform:ssd1325");
MODULE_DESCRIPTION("SSD1325 OLED Driver");
MODULE_AUTHOR("Alexey Mednyy");
MODULE_LICENSE("GPL");
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alexey Mednyy | 936 | 99.89% | 1 | 50.00% |
| Arnd Bergmann | 1 | 0.11% | 1 | 50.00% |
| Total | 937 | 100.00% | 2 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.