Release 4.11 drivers/staging/fbtft/fb_st7735r.c

/*
 * FB driver for the ST7735R LCD Controller
 *
 * Copyright (C) 2013 Noralf Tronnes
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <video/mipi_display.h>

#include "fbtft.h"


#define DRVNAME "fb_st7735r"

#define DEFAULT_GAMMA   "0F 1A 0F 18 2F 28 20 22 1F 1B 23 37 00 07 02 10\n" \
                        "0F 1B 0F 17 33 2C 29 2E 30 30 39 3F 00 07 03 10"


static s16 default_init_sequence[] = {
	-1, MIPI_DCS_SOFT_RESET,
	-2, 150,                               /* delay */

	-1, MIPI_DCS_EXIT_SLEEP_MODE,
	-2, 500,                               /* delay */

	/* FRMCTR1 - frame rate control: normal mode
         * frame rate = fosc / (1 x 2 + 40) * (LINE + 2C + 2D)
         */
	-1, 0xB1, 0x01, 0x2C, 0x2D,

	/* FRMCTR2 - frame rate control: idle mode
         * frame rate = fosc / (1 x 2 + 40) * (LINE + 2C + 2D)
         */
	-1, 0xB2, 0x01, 0x2C, 0x2D,

	/* FRMCTR3 - frame rate control - partial mode
         * dot inversion mode, line inversion mode
         */
	-1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D,

	/* INVCTR - display inversion control
         * no inversion
         */
	-1, 0xB4, 0x07,

	/* PWCTR1 - Power Control
         * -4.6V, AUTO mode
         */
	-1, 0xC0, 0xA2, 0x02, 0x84,

	/* PWCTR2 - Power Control
         * VGH25 = 2.4C VGSEL = -10 VGH = 3 * AVDD
         */
	-1, 0xC1, 0xC5,

	/* PWCTR3 - Power Control
         * Opamp current small, Boost frequency
         */
	-1, 0xC2, 0x0A, 0x00,

	/* PWCTR4 - Power Control
         * BCLK/2, Opamp current small & Medium low
         */
	-1, 0xC3, 0x8A, 0x2A,

	/* PWCTR5 - Power Control */
	-1, 0xC4, 0x8A, 0xEE,

	/* VMCTR1 - Power Control */
	-1, 0xC5, 0x0E,

	-1, MIPI_DCS_EXIT_INVERT_MODE,

	-1, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT,

	-1, MIPI_DCS_SET_DISPLAY_ON,
	-2, 100,                               /* delay */

	-1, MIPI_DCS_ENTER_NORMAL_MODE,
	-2, 10,                               /* delay */

	/* end marker */
	-3
};



static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
		  xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);

	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
		  ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);

	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Thomas Petazzoni
73
96.05%
1
50.00%
Priit Laes
3
3.95%
1
50.00%
Total
76
100.00%
2
100.00%


#define MY BIT(7)

#define MX BIT(6)

#define MV BIT(5)


static int set_var(struct fbtft_par *par)
{
	/* MADCTL - Memory data access control
         * RGB/BGR:
         * 1. Mode selection pin SRGB
         *    RGB H/W pin for color filter setting: 0=RGB, 1=BGR
         * 2. MADCTL RGB bit
         *    RGB-BGR ORDER color filter panel: 0=RGB, 1=BGR
         */
	switch (par->info->var.rotate) {
	case 0:
		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
			  MX | MY | (par->bgr << 3));
		break;
	case 270:
		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
			  MY | MV | (par->bgr << 3));
		break;
	case 180:
		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
			  par->bgr << 3);
		break;
	case 90:
		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
			  MX | MV | (par->bgr << 3));
		break;
	}

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Thomas Petazzoni
108
95.58%
1
33.33%
Priit Laes
4
3.54%
1
33.33%
Anson Jacob
1
0.88%
1
33.33%
Total
113
100.00%
3
100.00%

/*
 * Gamma string format:
 * VRF0P VOS0P PK0P PK1P PK2P PK3P PK4P PK5P PK6P PK7P PK8P PK9P SELV0P SELV1P SELV62P SELV63P
 * VRF0N VOS0N PK0N PK1N PK2N PK3N PK4N PK5N PK6N PK7N PK8N PK9N SELV0N SELV1N SELV62N SELV63N
 */

#define CURVE(num, idx)  curves[num * par->gamma.num_values + idx]


static int set_gamma(struct fbtft_par *par, u32 *curves)
{
	int i, j;

	/* apply mask */
	for (i = 0; i < par->gamma.num_curves; i++)
		for (j = 0; j < par->gamma.num_values; j++)
			CURVE(i, j) &= 0x3f;

	for (i = 0; i < par->gamma.num_curves; i++)
		write_reg(par, 0xE0 + i,
			CURVE(i, 0), CURVE(i, 1), CURVE(i, 2), CURVE(i, 3),
			CURVE(i, 4), CURVE(i, 5), CURVE(i, 6), CURVE(i, 7),
			CURVE(i, 8), CURVE(i, 9), CURVE(i, 10), CURVE(i, 11),
			CURVE(i, 12), CURVE(i, 13), CURVE(i, 14), CURVE(i, 15));

	return 0;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
Thomas Petazzoni
203
99.02%
1
33.33%
Geert Uytterhoeven
1
0.49%
1
33.33%
Arnd Bergmann
1
0.49%
1
33.33%
Total
205
100.00%
3
100.00%


#undef CURVE


static struct fbtft_display display = {
	.regwidth = 8,
	.width = 128,
	.height = 160,
	.init_sequence = default_init_sequence,
	.gamma_num = 2,
	.gamma_len = 16,
	.gamma = DEFAULT_GAMMA,
	.fbtftops = {
		.set_addr_win = set_addr_win,
		.set_var = set_var,
		.set_gamma = set_gamma,
        },
};

FBTFT_REGISTER_DRIVER(DRVNAME, "sitronix,st7735r", &display);

MODULE_ALIAS("spi:" DRVNAME);
MODULE_ALIAS("platform:" DRVNAME);
MODULE_ALIAS("spi:st7735r");
MODULE_ALIAS("platform:st7735r");

MODULE_DESCRIPTION("FB driver for the ST7735R LCD Controller");
MODULE_AUTHOR("Noralf Tronnes");
MODULE_LICENSE("GPL");
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Thomas Petazzoni
691
95.05%
1
10.00%
Priit Laes
17
2.34%
1
10.00%
Anson Jacob
10
1.38%
1
10.00%
Anish Bhatt
5
0.69%
3
30.00%
Geert Uytterhoeven
1
0.14%
1
10.00%
Joe Perches
1
0.14%
1
10.00%
Arnd Bergmann
1
0.14%
1
10.00%
Charlie Wong Super
1
0.14%
1
10.00%
Total
727
100.00%
10
100.00%
Directory: drivers/staging/fbtft

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.