cregit-Linux how code gets into the kernel

Release 4.11 drivers/staging/fbtft/fb_tls8204.c

/*
 * FB driver for the TLS8204 LCD Controller
 *
 * The display is monochrome and the video memory is RGB565.
 * Any pixel value except 0 turns the pixel on.
 *
 * Copyright (C) 2013 Noralf Tronnes
 * Copyright (C) 2014 Michael Hope (adapted for the TLS8204)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>

#include "fbtft.h"


#define DRVNAME		"fb_tls8204"

#define WIDTH		84

#define HEIGHT		48

#define TXBUFLEN	WIDTH

/* gamma is used to control contrast in this driver */

#define DEFAULT_GAMMA	"40"


static unsigned int bs = 4;
module_param(bs, uint, 0000);
MODULE_PARM_DESC(bs, "BS[2:0] Bias voltage level: 0-7 (default: 4)");


static int init_display(struct fbtft_par *par) { par->fbtftops.reset(par); /* Enter extended command mode */ write_reg(par, 0x21); /* 5:1 1 * 2:0 PD - Powerdown control: chip is active * 1:0 V - Entry mode: horizontal addressing * 0:1 H - Extended instruction set control: * extended */ /* H=1 Bias system */ write_reg(par, 0x10 | (bs & 0x7)); /* 4:1 1 * 3:0 0 * 2:x BS2 - Bias System * 1:x BS1 * 0:x BS0 */ /* Set the address of the first display line. */ write_reg(par, 0x04 | (64 >> 6)); write_reg(par, 0x40 | (64 & 0x3F)); /* Enter H=0 standard command mode */ write_reg(par, 0x20); /* H=0 Display control */ write_reg(par, 0x08 | 4); /* 3:1 1 * 2:1 D - DE: 10=normal mode * 1:0 0 * 0:0 E */ return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Thomas Petazzoni9096.77%150.00%
Anson Jacob33.23%150.00%
Total93100.00%2100.00%


static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) { /* H=0 Set X address of RAM */ write_reg(par, 0x80); /* 7:1 1 * 6-0: X[6:0] - 0x00 */ /* H=0 Set Y address of RAM */ write_reg(par, 0x40); /* 7:0 0 * 6:1 1 * 2-0: Y[2:0] - 0x0 */ }

Contributors

PersonTokensPropCommitsCommitProp
Thomas Petazzoni3995.12%150.00%
Anson Jacob24.88%150.00%
Total41100.00%2100.00%


static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) { u16 *vmem16 = (u16 *)par->info->screen_buffer; int x, y, i; int ret = 0; for (y = 0; y < HEIGHT / 8; y++) { u8 *buf = par->txbuf.buf; /* The display is 102x68 but the LCD is 84x48. * Set the write pointer at the start of each row. */ gpio_set_value(par->gpio.dc, 0); write_reg(par, 0x80 | 0); write_reg(par, 0x40 | y); for (x = 0; x < WIDTH; x++) { u8 ch = 0; for (i = 0; i < 8 * WIDTH; i += WIDTH) { ch >>= 1; if (vmem16[(y * 8 * WIDTH) + i + x]) ch |= 0x80; } *buf++ = ch; } /* Write the row */ gpio_set_value(par->gpio.dc, 1); ret = par->fbtftops.write(par, par->txbuf.buf, WIDTH); if (ret < 0) { dev_err(par->info->device, "write failed and returned: %d\n", ret); break; } } return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Thomas Petazzoni22298.67%125.00%
Lars Svensson10.44%125.00%
Haneen Mohammed10.44%125.00%
Anson Jacob10.44%125.00%
Total225100.00%4100.00%


static int set_gamma(struct fbtft_par *par, u32 *curves) { /* apply mask */ curves[0] &= 0x7F; write_reg(par, 0x21); /* turn on extended instruction set */ write_reg(par, 0x80 | curves[0]); write_reg(par, 0x20); /* turn off extended instruction set */ return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Thomas Petazzoni5398.15%150.00%
Arnd Bergmann11.85%150.00%
Total54100.00%2100.00%

static struct fbtft_display display = { .regwidth = 8, .width = WIDTH, .height = HEIGHT, .txbuflen = TXBUFLEN, .gamma_num = 1, .gamma_len = 1, .gamma = DEFAULT_GAMMA, .fbtftops = { .init_display = init_display, .set_addr_win = set_addr_win, .write_vmem = write_vmem, .set_gamma = set_gamma, }, .backlight = 1, }; FBTFT_REGISTER_DRIVER(DRVNAME, "teralane,tls8204", &display); MODULE_ALIAS("spi:" DRVNAME); MODULE_ALIAS("spi:tls8204"); MODULE_DESCRIPTION("FB driver for the TLS8204 LCD Controller"); MODULE_AUTHOR("Michael Hope"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
Thomas Petazzoni57497.79%111.11%
Anson Jacob61.02%111.11%
Anish Bhatt10.17%111.11%
Ming Yang10.17%111.11%
Anton Gerasimov10.17%111.11%
Lars Svensson10.17%111.11%
Abdul Rauf10.17%111.11%
Arnd Bergmann10.17%111.11%
Haneen Mohammed10.17%111.11%
Total587100.00%9100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.