cregit-Linux how code gets into the kernel

Release 4.11 drivers/staging/fwserial/fwserial.h

#ifndef _FIREWIRE_FWSERIAL_H

#define _FIREWIRE_FWSERIAL_H

#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/list.h>
#include <linux/firewire.h>
#include <linux/firewire-constants.h>
#include <linux/spinlock.h>
#include <linux/rcupdate.h>
#include <linux/mutex.h>
#include <linux/serial.h>
#include <linux/serial_reg.h>
#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>

#include "dma_fifo.h"

#ifdef FWTTY_PROFILING

#define DISTRIBUTION_MAX_SIZE     8192

#define DISTRIBUTION_MAX_INDEX    (ilog2(DISTRIBUTION_MAX_SIZE) + 1)

static inline void fwtty_profile_data(unsigned int stat[], unsigned int val) { int n = (val) ? min(ilog2(val) + 1, DISTRIBUTION_MAX_INDEX) : 0; ++stat[n]; }

Contributors

PersonTokensPropCommitsCommitProp
Peter Hurley4195.35%266.67%
Dominique van den Broeck24.65%133.33%
Total43100.00%3100.00%

#else #define DISTRIBUTION_MAX_INDEX 0 #define fwtty_profile_data(st, n) #endif /* Parameters for both VIRT_CABLE_PLUG & VIRT_CABLE_PLUG_RSP mgmt codes */ struct virt_plug_params { __be32 status_hi; __be32 status_lo; __be32 fifo_hi; __be32 fifo_lo; __be32 fifo_len; }; struct peer_work_params { union { struct virt_plug_params plug_req; }; }; /** * fwtty_peer: structure representing local & remote unit devices * @unit: unit child device of fw_device node * @serial: back pointer to associated fw_serial aggregate * @guid: unique 64-bit guid for this unit device * @generation: most recent bus generation * @node_id: most recent node_id * @speed: link speed of peer (0 = S100, 2 = S400, ... 5 = S3200) * @mgmt_addr: bus addr region to write mgmt packets to * @status_addr: bus addr register to write line status to * @fifo_addr: bus addr region to write serial output to * @fifo_len: max length for single write to fifo_addr * @list: link for insertion into fw_serial's peer_list * @rcu: for deferring peer reclamation * @lock: spinlock to synchonize changes to state & port fields * @work: only one work item can be queued at any one time * Note: pending work is canceled prior to removal, so this * peer is valid for at least the lifetime of the work function * @work_params: parameter block for work functions * @timer: timer for resetting peer state if remote request times out * @state: current state * @connect: work item for auto-connecting * @connect_retries: # of connections already attempted * @port: associated tty_port (usable if state == FWSC_ATTACHED) */ struct fwtty_peer { struct fw_unit *unit; struct fw_serial *serial; u64 guid; int generation; int node_id; unsigned int speed; int max_payload; u64 mgmt_addr; /* these are usable only if state == FWSC_ATTACHED */ u64 status_addr; u64 fifo_addr; int fifo_len; struct list_head list; struct rcu_head rcu; spinlock_t lock; work_func_t workfn; struct work_struct work; struct peer_work_params work_params; struct timer_list timer; int state; struct delayed_work connect; int connect_retries; struct fwtty_port *port; }; #define to_peer(ptr, field) (container_of(ptr, struct fwtty_peer, field)) /* state values for fwtty_peer.state field */ enum fwtty_peer_state { FWPS_GONE, FWPS_NOT_ATTACHED, FWPS_ATTACHED, FWPS_PLUG_PENDING, FWPS_PLUG_RESPONDING, FWPS_UNPLUG_PENDING, FWPS_UNPLUG_RESPONDING, FWPS_NO_MGMT_ADDR = -1, }; #define CONNECT_RETRY_DELAY HZ #define MAX_CONNECT_RETRIES 10 /* must be holding peer lock for these state funclets */
static inline void peer_set_state(struct fwtty_peer *peer, int new) { peer->state = new; }

Contributors

PersonTokensPropCommitsCommitProp
Peter Hurley21100.00%1100.00%
Total21100.00%1100.00%


static inline struct fwtty_port *peer_revert_state(struct fwtty_peer *peer) { struct fwtty_port *port = peer->port; peer->port = NULL; peer_set_state(peer, FWPS_NOT_ATTACHED); return port; }

Contributors

PersonTokensPropCommitsCommitProp
Peter Hurley39100.00%1100.00%
Total39100.00%1100.00%

struct fwserial_mgmt_pkt { struct { __be16 len; __be16 code; } hdr; union { struct virt_plug_params plug_req; struct virt_plug_params plug_rsp; }; } __packed; /* fwserial_mgmt_packet codes */ #define FWSC_RSP_OK 0x0000 #define FWSC_RSP_NACK 0x8000 #define FWSC_CODE_MASK 0x0fff #define FWSC_VIRT_CABLE_PLUG 1 #define FWSC_VIRT_CABLE_UNPLUG 2 #define FWSC_VIRT_CABLE_PLUG_RSP 3 #define FWSC_VIRT_CABLE_UNPLUG_RSP 4 /* 1 min. plug timeout -- suitable for userland authorization */ #define VIRT_CABLE_PLUG_TIMEOUT (60 * HZ) struct stats { unsigned int xchars; unsigned int dropped; unsigned int tx_stall; unsigned int fifo_errs; unsigned int sent; unsigned int lost; unsigned int throttled; unsigned int reads[DISTRIBUTION_MAX_INDEX + 1]; unsigned int writes[DISTRIBUTION_MAX_INDEX + 1]; unsigned int txns[DISTRIBUTION_MAX_INDEX + 1]; unsigned int unthrottle[DISTRIBUTION_MAX_INDEX + 1]; }; struct fwconsole_ops { void (*notify)(int code, void *data); void (*stats)(struct stats *stats, void *data); void (*proc_show)(struct seq_file *m, void *data); }; /* codes for console ops notify */ #define FWCON_NOTIFY_ATTACH 1 #define FWCON_NOTIFY_DETACH 2 /** * fwtty_port: structure used to track/represent underlying tty_port * @port: underlying tty_port * @device: tty device * @index: index into port_table for this particular port * note: minor = index + minor_start assigned by tty_alloc_driver() * @serial: back pointer to the containing fw_serial * @rx_handler: bus address handler for unique addr region used by remotes * to communicate with this port. Every port uses * fwtty_port_handler() for per port transactions. * @fwcon_ops: ops for attached fw_console (if any) * @con_data: private data for fw_console * @wait_tx: waitqueue for sleeping until writer/drain completes tx * @emit_breaks: delayed work responsible for generating breaks when the * break line status is active * @cps : characters per second computed from the termios settings * @break_last: timestamp in jiffies from last emit_breaks * @hangup: work responsible for HUPing when carrier is dropped/lost * @mstatus: loose virtualization of LSR/MSR * bits 15..0 correspond to TIOCM_* bits * bits 19..16 reserved for mctrl * bit 20 OOB_TX_THROTTLE * bits 23..21 reserved * bits 31..24 correspond to UART_LSR_* bits * @lock: spinlock for protecting concurrent access to fields below it * @mctrl: loose virtualization of MCR * bits 15..0 correspond to TIOCM_* bits * bit 16 OOB_RX_THROTTLE * bits 19..17 reserved * bits 31..20 reserved for mstatus * @drain: delayed work scheduled to ensure that writes are flushed. * The work can race with the writer but concurrent sending is * prevented with the IN_TX flag. Scheduled under lock to * limit scheduling when fifo has just been drained. * @tx_fifo: fifo used to store & block-up writes for dma to remote * @max_payload: max bytes transmissible per dma (based on peer's max_payload) * @status_mask: UART_LSR_* bitmask significant to rx (based on termios) * @ignore_mask: UART_LSR_* bitmask of states to ignore (also based on termios) * @break_ctl: if set, port is 'sending break' to remote * @write_only: self-explanatory * @overrun: previous rx was lost (partially or completely) * @loopback: if set, port is in loopback mode * @flags: atomic bit flags * bit 0: IN_TX - gate to allow only one cpu to send from the dma fifo * at a time. * bit 1: STOP_TX - force tx to exit while sending * @peer: rcu-pointer to associated fwtty_peer (if attached) * NULL if no peer attached * @icount: predefined statistics reported by the TIOCGICOUNT ioctl * @stats: additional statistics reported in /proc/tty/driver/firewire_serial */ struct fwtty_port { struct tty_port port; struct device *device; unsigned int index; struct fw_serial *serial; struct fw_address_handler rx_handler; struct fwconsole_ops *fwcon_ops; void *con_data; wait_queue_head_t wait_tx; struct delayed_work emit_breaks; unsigned int cps; unsigned long break_last; struct work_struct hangup; unsigned int mstatus; spinlock_t lock; unsigned int mctrl; struct delayed_work drain; struct dma_fifo tx_fifo; int max_payload; unsigned int status_mask; unsigned int ignore_mask; unsigned int break_ctl:1, write_only:1, overrun:1, loopback:1; unsigned long flags; struct fwtty_peer __rcu *peer; struct async_icount icount; struct stats stats; }; #define to_port(ptr, field) (container_of(ptr, struct fwtty_port, field)) /* bit #s for flags field */ #define IN_TX 0 #define STOP_TX 1 /* bitmasks for special mctrl/mstatus bits */ #define OOB_RX_THROTTLE 0x00010000 #define MCTRL_RSRVD 0x000e0000 #define OOB_TX_THROTTLE 0x00100000 #define MSTATUS_RSRVD 0x00e00000 #define MCTRL_MASK (TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | TIOCM_OUT2 | \ TIOCM_LOOP | OOB_RX_THROTTLE | MCTRL_RSRVD) /* XXX even every 1/50th secs. may be unnecessarily accurate */ /* delay in jiffies between brk emits */ #define FREQ_BREAKS (HZ / 50) /* Ports are allocated in blocks of num_ports for each fw_card */ #define MAX_CARD_PORTS CONFIG_FWTTY_MAX_CARD_PORTS #define MAX_TOTAL_PORTS CONFIG_FWTTY_MAX_TOTAL_PORTS /* tuning parameters */ #define FWTTY_PORT_TXFIFO_LEN 4096 #define FWTTY_PORT_MAX_PEND_DMA 8 /* costs a cache line per pend */ #define DRAIN_THRESHOLD 1024 #define MAX_ASYNC_PAYLOAD 4096 /* ohci-defined limit */ #define WRITER_MINIMUM 128 /* TODO: how to set watermark to AR context size? see fwtty_rx() */ #define HIGH_WATERMARK 32768 /* AR context is 32K */ /* * Size of bus addr region above 4GB used per port as the recv addr * - must be at least as big as the MAX_ASYNC_PAYLOAD */ #define FWTTY_PORT_RXFIFO_LEN MAX_ASYNC_PAYLOAD /** * fw_serial: aggregate used to associate tty ports with specific fw_card * @card: fw_card associated with this fw_serial device (1:1 association) * @kref: reference-counted multi-port management allows delayed destroy * @self: local unit device as 'peer'. Not valid until local unit device * is enumerated. * @list: link for insertion into fwserial_list * @peer_list: list of local & remote unit devices attached to this card * @ports: fixed array of tty_ports provided by this serial device */ struct fw_serial { struct fw_card *card; struct kref kref; struct dentry *debugfs; struct fwtty_peer *self; struct list_head list; struct list_head peer_list; struct fwtty_port *ports[MAX_CARD_PORTS]; }; #define to_serial(ptr, field) (container_of(ptr, struct fw_serial, field)) #define TTY_DEV_NAME "fwtty" /* ttyFW was taken */ static const char tty_dev_name[] = TTY_DEV_NAME; static const char loop_dev_name[] = "fwloop"; extern struct tty_driver *fwtty_driver; /* * Returns the max send async payload size in bytes based on the unit device * link speed. Self-limiting asynchronous bandwidth (via reducing the payload) * is not necessary and does not work, because * 1) asynchronous traffic will absorb all available bandwidth (less that * being used for isochronous traffic) * 2) isochronous arbitration always wins. */
static inline int link_speed_to_max_payload(unsigned int speed) { /* Max async payload is 4096 - see IEEE 1394-2008 tables 6-4, 16-18 */ return min(512 << speed, 4096); }

Contributors

PersonTokensPropCommitsCommitProp
Peter Hurley2195.45%266.67%
Dominique van den Broeck14.55%133.33%
Total22100.00%3100.00%

#endif /* _FIREWIRE_FWSERIAL_H */

Overall Contributors

PersonTokensPropCommitsCommitProp
Peter Hurley82596.94%872.73%
Dominique van den Broeck222.59%19.09%
Tejun Heo30.35%19.09%
Carlos E. Garcia10.12%19.09%
Total851100.00%11100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.