cregit-Linux how code gets into the kernel

Release 4.11 drivers/staging/iio/addac/adt7316-spi.c

/*
 * API bus driver for ADT7316/7/8 ADT7516/7/9 digital temperature
 * sensor, ADC and DAC
 *
 * Copyright 2010 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later.
 */

#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/spi/spi.h>

#include "adt7316.h"


#define ADT7316_SPI_MAX_FREQ_HZ		5000000

#define ADT7316_SPI_CMD_READ		0x91

#define ADT7316_SPI_CMD_WRITE		0x90

/*
 * adt7316 register access by SPI
 */


static int adt7316_spi_multi_read(void *client, u8 reg, u8 count, u8 *data) { struct spi_device *spi_dev = client; u8 cmd[2]; int ret = 0; if (count > ADT7316_REG_MAX_ADDR) count = ADT7316_REG_MAX_ADDR; cmd[0] = ADT7316_SPI_CMD_WRITE; cmd[1] = reg; ret = spi_write(spi_dev, cmd, 2); if (ret < 0) { dev_err(&spi_dev->dev, "SPI fail to select reg\n"); return ret; } cmd[0] = ADT7316_SPI_CMD_READ; ret = spi_write_then_read(spi_dev, cmd, 1, data, count); if (ret < 0) { dev_err(&spi_dev->dev, "SPI read data error\n"); return ret; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Sonic Zhang140100.00%1100.00%
Total140100.00%1100.00%


static int adt7316_spi_multi_write(void *client, u8 reg, u8 count, u8 *data) { struct spi_device *spi_dev = client; u8 buf[ADT7316_REG_MAX_ADDR + 2]; int i, ret = 0; if (count > ADT7316_REG_MAX_ADDR) count = ADT7316_REG_MAX_ADDR; buf[0] = ADT7316_SPI_CMD_WRITE; buf[1] = reg; for (i = 0; i < count; i++) buf[i + 2] = data[i]; ret = spi_write(spi_dev, buf, count + 2); if (ret < 0) { dev_err(&spi_dev->dev, "SPI write error\n"); return ret; } return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Sonic Zhang128100.00%1100.00%
Total128100.00%1100.00%


static int adt7316_spi_read(void *client, u8 reg, u8 *data) { return adt7316_spi_multi_read(client, reg, 1, data); }

Contributors

PersonTokensPropCommitsCommitProp
Sonic Zhang29100.00%1100.00%
Total29100.00%1100.00%


static int adt7316_spi_write(void *client, u8 reg, u8 val) { return adt7316_spi_multi_write(client, reg, 1, &val); }

Contributors

PersonTokensPropCommitsCommitProp
Sonic Zhang29100.00%1100.00%
Total29100.00%1100.00%

/* * device probe and remove */
static int adt7316_spi_probe(struct spi_device *spi_dev) { struct adt7316_bus bus = { .client = spi_dev, .irq = spi_dev->irq, .irq_flags = IRQF_TRIGGER_LOW, .read = adt7316_spi_read, .write = adt7316_spi_write, .multi_read = adt7316_spi_multi_read, .multi_write = adt7316_spi_multi_write, }; /* don't exceed max specified SPI CLK frequency */ if (spi_dev->max_speed_hz > ADT7316_SPI_MAX_FREQ_HZ) { dev_err(&spi_dev->dev, "SPI CLK %d Hz?\n", spi_dev->max_speed_hz); return -EINVAL; } /* switch from default I2C protocol to SPI protocol */ adt7316_spi_write(spi_dev, 0, 0); adt7316_spi_write(spi_dev, 0, 0); adt7316_spi_write(spi_dev, 0, 0); return adt7316_probe(&spi_dev->dev, &bus, spi_dev->modalias); }

Contributors

PersonTokensPropCommitsCommitProp
Sonic Zhang127100.00%1100.00%
Total127100.00%1100.00%

static const struct spi_device_id adt7316_spi_id[] = { { "adt7316", 0 }, { "adt7317", 0 }, { "adt7318", 0 }, { "adt7516", 0 }, { "adt7517", 0 }, { "adt7519", 0 }, { } }; MODULE_DEVICE_TABLE(spi, adt7316_spi_id); static struct spi_driver adt7316_driver = { .driver = { .name = "adt7316", .pm = ADT7316_PM_OPS, }, .probe = adt7316_spi_probe, .id_table = adt7316_spi_id, }; module_spi_driver(adt7316_driver); MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>"); MODULE_DESCRIPTION("SPI bus driver for Analog Devices ADT7316/7/8 and ADT7516/7/9 digital temperature sensor, ADC and DAC"); MODULE_LICENSE("GPL v2");

Overall Contributors

PersonTokensPropCommitsCommitProp
Sonic Zhang58799.16%125.00%
Lars-Peter Clausen40.68%250.00%
Ebru Akagunduz10.17%125.00%
Total592100.00%4100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.