Release 4.11 drivers/staging/mt29f_spinand/mt29f_spinand.c
/*
* Copyright (c) 2003-2013 Broadcom Corporation
*
* Copyright (c) 2009-2010 Micron Technology, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/spi/spi.h>
#include "mt29f_spinand.h"
#define BUFSIZE (10 * 64 * 2048)
#define CACHE_BUF 2112
/*
* OOB area specification layout: Total 32 available free bytes.
*/
static inline struct spinand_state *mtd_to_state(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct spinand_info *info = nand_get_controller_data(chip);
struct spinand_state *state = info->priv;
return state;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 40 | 86.96% | 1 | 33.33% |
Boris Brezillon | 6 | 13.04% | 2 | 66.67% |
Total | 46 | 100.00% | 3 | 100.00% |
#ifdef CONFIG_MTD_SPINAND_ONDIEECC
static int enable_hw_ecc;
static int enable_read_hw_ecc;
static int spinand_ooblayout_64_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
if (section > 3)
return -ERANGE;
oobregion->offset = (section * 16) + 1;
oobregion->length = 6;
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Boris Brezillon | 41 | 82.00% | 1 | 50.00% |
Kamlakant Patel | 9 | 18.00% | 1 | 50.00% |
Total | 50 | 100.00% | 2 | 100.00% |
static int spinand_ooblayout_64_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
if (section > 3)
return -ERANGE;
oobregion->offset = (section * 16) + 8;
oobregion->length = 8;
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Boris Brezillon | 42 | 84.00% | 1 | 50.00% |
Kamlakant Patel | 8 | 16.00% | 1 | 50.00% |
Total | 50 | 100.00% | 2 | 100.00% |
static const struct mtd_ooblayout_ops spinand_oob_64_ops = {
.ecc = spinand_ooblayout_64_ecc,
.free = spinand_ooblayout_64_free,
};
#endif
/**
* spinand_cmd - process a command to send to the SPI Nand
* Description:
* Set up the command buffer to send to the SPI controller.
* The command buffer has to initialized to 0.
*/
static int spinand_cmd(struct spi_device *spi, struct spinand_cmd *cmd)
{
struct spi_message message;
struct spi_transfer x[4];
u8 dummy = 0xff;
spi_message_init(&message);
memset(x, 0, sizeof(x));
x[0].len = 1;
x[0].tx_buf = &cmd->cmd;
spi_message_add_tail(&x[0], &message);
if (cmd->n_addr) {
x[1].len = cmd->n_addr;
x[1].tx_buf = cmd->addr;
spi_message_add_tail(&x[1], &message);
}
if (cmd->n_dummy) {
x[2].len = cmd->n_dummy;
x[2].tx_buf = &dummy;
spi_message_add_tail(&x[2], &message);
}
if (cmd->n_tx) {
x[3].len = cmd->n_tx;
x[3].tx_buf = cmd->tx_buf;
spi_message_add_tail(&x[3], &message);
}
if (cmd->n_rx) {
x[3].len = cmd->n_rx;
x[3].rx_buf = cmd->rx_buf;
spi_message_add_tail(&x[3], &message);
}
return spi_sync(spi, &message);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 259 | 100.00% | 1 | 100.00% |
Total | 259 | 100.00% | 1 | 100.00% |
/**
* spinand_read_id - Read SPI Nand ID
* Description:
* read two ID bytes from the SPI Nand device
*/
static int spinand_read_id(struct spi_device *spi_nand, u8 *id)
{
int retval;
u8 nand_id[3];
struct spinand_cmd cmd = {0};
cmd.cmd = CMD_READ_ID;
cmd.n_rx = 3;
cmd.rx_buf = &nand_id[0];
retval = spinand_cmd(spi_nand, &cmd);
if (retval < 0) {
dev_err(&spi_nand->dev, "error %d reading id\n", retval);
return retval;
}
id[0] = nand_id[1];
id[1] = nand_id[2];
return retval;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 110 | 100.00% | 1 | 100.00% |
Total | 110 | 100.00% | 1 | 100.00% |
/**
* spinand_read_status - send command 0xf to the SPI Nand status register
* Description:
* After read, write, or erase, the Nand device is expected to set the
* busy status.
* This function is to allow reading the status of the command: read,
* write, and erase.
* Once the status turns to be ready, the other status bits also are
* valid status bits.
*/
static int spinand_read_status(struct spi_device *spi_nand, u8 *status)
{
struct spinand_cmd cmd = {0};
int ret;
cmd.cmd = CMD_READ_REG;
cmd.n_addr = 1;
cmd.addr[0] = REG_STATUS;
cmd.n_rx = 1;
cmd.rx_buf = status;
ret = spinand_cmd(spi_nand, &cmd);
if (ret < 0)
dev_err(&spi_nand->dev, "err: %d read status register\n", ret);
return ret;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 89 | 98.89% | 1 | 50.00% |
Eva Rachel Retuya | 1 | 1.11% | 1 | 50.00% |
Total | 90 | 100.00% | 2 | 100.00% |
#define MAX_WAIT_JIFFIES (40 * HZ)
static int wait_till_ready(struct spi_device *spi_nand)
{
unsigned long deadline;
int retval;
u8 stat = 0;
deadline = jiffies + MAX_WAIT_JIFFIES;
do {
retval = spinand_read_status(spi_nand, &stat);
if (retval < 0)
return -1;
if (!(stat & 0x1))
break;
cond_resched();
} while (!time_after_eq(jiffies, deadline));
if ((stat & 0x1) == 0)
return 0;
return -1;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 93 | 100.00% | 1 | 100.00% |
Total | 93 | 100.00% | 1 | 100.00% |
/**
* spinand_get_otp - send command 0xf to read the SPI Nand OTP register
* Description:
* There is one bit( bit 0x10 ) to set or to clear the internal ECC.
* Enable chip internal ECC, set the bit to 1
* Disable chip internal ECC, clear the bit to 0
*/
static int spinand_get_otp(struct spi_device *spi_nand, u8 *otp)
{
struct spinand_cmd cmd = {0};
int retval;
cmd.cmd = CMD_READ_REG;
cmd.n_addr = 1;
cmd.addr[0] = REG_OTP;
cmd.n_rx = 1;
cmd.rx_buf = otp;
retval = spinand_cmd(spi_nand, &cmd);
if (retval < 0)
dev_err(&spi_nand->dev, "error %d get otp\n", retval);
return retval;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 90 | 100.00% | 1 | 100.00% |
Total | 90 | 100.00% | 1 | 100.00% |
/**
* spinand_set_otp - send command 0x1f to write the SPI Nand OTP register
* Description:
* There is one bit( bit 0x10 ) to set or to clear the internal ECC.
* Enable chip internal ECC, set the bit to 1
* Disable chip internal ECC, clear the bit to 0
*/
static int spinand_set_otp(struct spi_device *spi_nand, u8 *otp)
{
int retval;
struct spinand_cmd cmd = {0};
cmd.cmd = CMD_WRITE_REG;
cmd.n_addr = 1;
cmd.addr[0] = REG_OTP;
cmd.n_tx = 1;
cmd.tx_buf = otp;
retval = spinand_cmd(spi_nand, &cmd);
if (retval < 0)
dev_err(&spi_nand->dev, "error %d set otp\n", retval);
return retval;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 85 | 94.44% | 1 | 50.00% |
Manuel Pégourié-Gonnard | 5 | 5.56% | 1 | 50.00% |
Total | 90 | 100.00% | 2 | 100.00% |
#ifdef CONFIG_MTD_SPINAND_ONDIEECC
/**
* spinand_enable_ecc - send command 0x1f to write the SPI Nand OTP register
* Description:
* There is one bit( bit 0x10 ) to set or to clear the internal ECC.
* Enable chip internal ECC, set the bit to 1
* Disable chip internal ECC, clear the bit to 0
*/
static int spinand_enable_ecc(struct spi_device *spi_nand)
{
int retval;
u8 otp = 0;
retval = spinand_get_otp(spi_nand, &otp);
if (retval < 0)
return retval;
if ((otp & OTP_ECC_MASK) == OTP_ECC_MASK)
return 0;
otp |= OTP_ECC_MASK;
retval = spinand_set_otp(spi_nand, &otp);
if (retval < 0)
return retval;
return spinand_get_otp(spi_nand, &otp);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 83 | 100.00% | 1 | 100.00% |
Total | 83 | 100.00% | 1 | 100.00% |
#endif
static int spinand_disable_ecc(struct spi_device *spi_nand)
{
int retval;
u8 otp = 0;
retval = spinand_get_otp(spi_nand, &otp);
if (retval < 0)
return retval;
if ((otp & OTP_ECC_MASK) == OTP_ECC_MASK) {
otp &= ~OTP_ECC_MASK;
retval = spinand_set_otp(spi_nand, &otp);
if (retval < 0)
return retval;
return spinand_get_otp(spi_nand, &otp);
}
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 86 | 100.00% | 1 | 100.00% |
Total | 86 | 100.00% | 1 | 100.00% |
/**
* spinand_write_enable - send command 0x06 to enable write or erase the
* Nand cells
* Description:
* Before write and erase the Nand cells, the write enable has to be set.
* After the write or erase, the write enable bit is automatically
* cleared (status register bit 2)
* Set the bit 2 of the status register has the same effect
*/
static int spinand_write_enable(struct spi_device *spi_nand)
{
struct spinand_cmd cmd = {0};
cmd.cmd = CMD_WR_ENABLE;
return spinand_cmd(spi_nand, &cmd);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 34 | 100.00% | 1 | 100.00% |
Total | 34 | 100.00% | 1 | 100.00% |
static int spinand_read_page_to_cache(struct spi_device *spi_nand, u16 page_id)
{
struct spinand_cmd cmd = {0};
u16 row;
row = page_id;
cmd.cmd = CMD_READ;
cmd.n_addr = 3;
cmd.addr[1] = (u8)((row & 0xff00) >> 8);
cmd.addr[2] = (u8)(row & 0x00ff);
return spinand_cmd(spi_nand, &cmd);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 86 | 100.00% | 1 | 100.00% |
Total | 86 | 100.00% | 1 | 100.00% |
/**
* spinand_read_from_cache - send command 0x03 to read out the data from the
* cache register (2112 bytes max)
* Description:
* The read can specify 1 to 2112 bytes of data read at the corresponding
* locations.
* No tRd delay.
*/
static int spinand_read_from_cache(struct spi_device *spi_nand, u16 page_id,
u16 byte_id, u16 len, u8 *rbuf)
{
struct spinand_cmd cmd = {0};
u16 column;
column = byte_id;
cmd.cmd = CMD_READ_RDM;
cmd.n_addr = 3;
cmd.addr[0] = (u8)((column & 0xff00) >> 8);
cmd.addr[0] |= (u8)(((page_id >> 6) & 0x1) << 4);
cmd.addr[1] = (u8)(column & 0x00ff);
cmd.addr[2] = (u8)(0xff);
cmd.n_dummy = 0;
cmd.n_rx = len;
cmd.rx_buf = rbuf;
return spinand_cmd(spi_nand, &cmd);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 152 | 100.00% | 1 | 100.00% |
Total | 152 | 100.00% | 1 | 100.00% |
/**
* spinand_read_page - read a page
* @page_id: the physical page number
* @offset: the location from 0 to 2111
* @len: number of bytes to read
* @rbuf: read buffer to hold @len bytes
*
* Description:
* The read includes two commands to the Nand - 0x13 and 0x03 commands
* Poll to read status to wait for tRD time.
*/
static int spinand_read_page(struct spi_device *spi_nand, u16 page_id,
u16 offset, u16 len, u8 *rbuf)
{
int ret;
u8 status = 0;
#ifdef CONFIG_MTD_SPINAND_ONDIEECC
if (enable_read_hw_ecc) {
if (spinand_enable_ecc(spi_nand) < 0)
dev_err(&spi_nand->dev, "enable HW ECC failed!");
}
#endif
ret = spinand_read_page_to_cache(spi_nand, page_id);
if (ret < 0)
return ret;
if (wait_till_ready(spi_nand))
dev_err(&spi_nand->dev, "WAIT timedout!!!\n");
while (1) {
ret = spinand_read_status(spi_nand, &status);
if (ret < 0) {
dev_err(&spi_nand->dev,
"err %d read status register\n", ret);
return ret;
}
if ((status & STATUS_OIP_MASK) == STATUS_READY) {
if ((status & STATUS_ECC_MASK) == STATUS_ECC_ERROR) {
dev_err(&spi_nand->dev, "ecc error, page=%d\n",
page_id);
return 0;
}
break;
}
}
ret = spinand_read_from_cache(spi_nand, page_id, offset, len, rbuf);
if (ret < 0) {
dev_err(&spi_nand->dev, "read from cache failed!!\n");
return ret;
}
#ifdef CONFIG_MTD_SPINAND_ONDIEECC
if (enable_read_hw_ecc) {
ret = spinand_disable_ecc(spi_nand);
if (ret < 0) {
dev_err(&spi_nand->dev, "disable ecc failed!!\n");
return ret;
}
enable_read_hw_ecc = 0;
}
#endif
return ret;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 258 | 100.00% | 1 | 100.00% |
Total | 258 | 100.00% | 1 | 100.00% |
/**
* spinand_program_data_to_cache - write a page to cache
* @byte_id: the location to write to the cache
* @len: number of bytes to write
* @wbuf: write buffer holding @len bytes
*
* Description:
* The write command used here is 0x84--indicating that the cache is
* not cleared first.
* Since it is writing the data to cache, there is no tPROG time.
*/
static int spinand_program_data_to_cache(struct spi_device *spi_nand,
u16 page_id, u16 byte_id,
u16 len, u8 *wbuf)
{
struct spinand_cmd cmd = {0};
u16 column;
column = byte_id;
cmd.cmd = CMD_PROG_PAGE_CLRCACHE;
cmd.n_addr = 2;
cmd.addr[0] = (u8)((column & 0xff00) >> 8);
cmd.addr[0] |= (u8)(((page_id >> 6) & 0x1) << 4);
cmd.addr[1] = (u8)(column & 0x00ff);
cmd.n_tx = len;
cmd.tx_buf = wbuf;
return spinand_cmd(spi_nand, &cmd);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 132 | 100.00% | 1 | 100.00% |
Total | 132 | 100.00% | 1 | 100.00% |
/**
* spinand_program_execute - write a page from cache to the Nand array
* @page_id: the physical page location to write the page.
*
* Description:
* The write command used here is 0x10--indicating the cache is writing to
* the Nand array.
* Need to wait for tPROG time to finish the transaction.
*/
static int spinand_program_execute(struct spi_device *spi_nand, u16 page_id)
{
struct spinand_cmd cmd = {0};
u16 row;
row = page_id;
cmd.cmd = CMD_PROG_PAGE_EXC;
cmd.n_addr = 3;
cmd.addr[1] = (u8)((row & 0xff00) >> 8);
cmd.addr[2] = (u8)(row & 0x00ff);
return spinand_cmd(spi_nand, &cmd);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 86 | 100.00% | 1 | 100.00% |
Total | 86 | 100.00% | 1 | 100.00% |
/**
* spinand_program_page - write a page
* @page_id: the physical page location to write the page.
* @offset: the location from the cache starting from 0 to 2111
* @len: the number of bytes to write
* @buf: the buffer holding @len bytes
*
* Description:
* The commands used here are 0x06, 0x84, and 0x10--indicating that
* the write enable is first sent, the write cache command, and the
* write execute command.
* Poll to wait for the tPROG time to finish the transaction.
*/
static int spinand_program_page(struct spi_device *spi_nand,
u16 page_id, u16 offset, u16 len, u8 *buf)
{
int retval;
u8 status = 0;
u8 *wbuf;
#ifdef CONFIG_MTD_SPINAND_ONDIEECC
unsigned int i, j;
wbuf = devm_kzalloc(&spi_nand->dev, CACHE_BUF, GFP_KERNEL);
if (!wbuf)
return -ENOMEM;
enable_read_hw_ecc = 0;
spinand_read_page(spi_nand, page_id, 0, CACHE_BUF, wbuf);
for (i = offset, j = 0; i < len; i++, j++)
wbuf[i] &= buf[j];
if (enable_hw_ecc) {
retval = spinand_enable_ecc(spi_nand);
if (retval < 0) {
dev_err(&spi_nand->dev, "enable ecc failed!!\n");
return retval;
}
}
#else
wbuf = buf;
#endif
retval = spinand_write_enable(spi_nand);
if (retval < 0) {
dev_err(&spi_nand->dev, "write enable failed!!\n");
return retval;
}
if (wait_till_ready(spi_nand))
dev_err(&spi_nand->dev, "wait timedout!!!\n");
retval = spinand_program_data_to_cache(spi_nand, page_id,
offset, len, wbuf);
if (retval < 0)
return retval;
retval = spinand_program_execute(spi_nand, page_id);
if (retval < 0)
return retval;
while (1) {
retval = spinand_read_status(spi_nand, &status);
if (retval < 0) {
dev_err(&spi_nand->dev,
"error %d reading status register\n", retval);
return retval;
}
if ((status & STATUS_OIP_MASK) == STATUS_READY) {
if ((status & STATUS_P_FAIL_MASK) == STATUS_P_FAIL) {
dev_err(&spi_nand->dev,
"program error, page %d\n", page_id);
return -1;
}
break;
}
}
#ifdef CONFIG_MTD_SPINAND_ONDIEECC
if (enable_hw_ecc) {
retval = spinand_disable_ecc(spi_nand);
if (retval < 0) {
dev_err(&spi_nand->dev, "disable ecc failed!!\n");
return retval;
}
enable_hw_ecc = 0;
}
#endif
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 356 | 96.22% | 1 | 33.33% |
Manuel Pégourié-Gonnard | 13 | 3.51% | 1 | 33.33% |
Eva Rachel Retuya | 1 | 0.27% | 1 | 33.33% |
Total | 370 | 100.00% | 3 | 100.00% |
/**
* spinand_erase_block_erase - erase a page
* @block_id: the physical block location to erase.
*
* Description:
* The command used here is 0xd8--indicating an erase command to erase
* one block--64 pages
* Need to wait for tERS.
*/
static int spinand_erase_block_erase(struct spi_device *spi_nand, u16 block_id)
{
struct spinand_cmd cmd = {0};
u16 row;
row = block_id;
cmd.cmd = CMD_ERASE_BLK;
cmd.n_addr = 3;
cmd.addr[1] = (u8)((row & 0xff00) >> 8);
cmd.addr[2] = (u8)(row & 0x00ff);
return spinand_cmd(spi_nand, &cmd);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 86 | 100.00% | 1 | 100.00% |
Total | 86 | 100.00% | 1 | 100.00% |
/**
* spinand_erase_block - erase a page
* @block_id: the physical block location to erase.
*
* Description:
* The commands used here are 0x06 and 0xd8--indicating an erase
* command to erase one block--64 pages
* It will first to enable the write enable bit (0x06 command),
* and then send the 0xd8 erase command
* Poll to wait for the tERS time to complete the tranaction.
*/
static int spinand_erase_block(struct spi_device *spi_nand, u16 block_id)
{
int retval;
u8 status = 0;
retval = spinand_write_enable(spi_nand);
if (wait_till_ready(spi_nand))
dev_err(&spi_nand->dev, "wait timedout!!!\n");
retval = spinand_erase_block_erase(spi_nand, block_id);
while (1) {
retval = spinand_read_status(spi_nand, &status);
if (retval < 0) {
dev_err(&spi_nand->dev,
"error %d reading status register\n", retval);
return retval;
}
if ((status & STATUS_OIP_MASK) == STATUS_READY) {
if ((status & STATUS_E_FAIL_MASK) == STATUS_E_FAIL) {
dev_err(&spi_nand->dev,
"erase error, block %d\n", block_id);
return -1;
}
break;
}
}
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 138 | 100.00% | 1 | 100.00% |
Total | 138 | 100.00% | 1 | 100.00% |
#ifdef CONFIG_MTD_SPINAND_ONDIEECC
static int spinand_write_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip,
const u8 *buf, int oob_required,
int page)
{
const u8 *p = buf;
int eccsize = chip->ecc.size;
int eccsteps = chip->ecc.steps;
enable_hw_ecc = 1;
chip->write_buf(mtd, p, eccsize * eccsteps);
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 67 | 93.06% | 1 | 33.33% |
Boris Brezillon | 3 | 4.17% | 1 | 33.33% |
Eva Rachel Retuya | 2 | 2.78% | 1 | 33.33% |
Total | 72 | 100.00% | 3 | 100.00% |
static int spinand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
u8 *buf, int oob_required, int page)
{
int retval;
u8 status;
u8 *p = buf;
int eccsize = chip->ecc.size;
int eccsteps = chip->ecc.steps;
struct spinand_info *info = nand_get_controller_data(chip);
enable_read_hw_ecc = 1;
chip->read_buf(mtd, p, eccsize * eccsteps);
if (oob_required)
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
while (1) {
retval = spinand_read_status(info->spi, &status);
if (retval < 0) {
dev_err(&mtd->dev,
"error %d reading status register\n", retval);
return retval;
}
if ((status & STATUS_OIP_MASK) == STATUS_READY) {
if ((status & STATUS_ECC_MASK) == STATUS_ECC_ERROR) {
pr_info("spinand: ECC error\n");
mtd->ecc_stats.failed++;
} else if ((status & STATUS_ECC_MASK) ==
STATUS_ECC_1BIT_CORRECTED)
mtd->ecc_stats.corrected++;
break;
}
}
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 170 | 84.58% | 1 | 25.00% |
Devendra Naga | 26 | 12.94% | 1 | 25.00% |
Boris Brezillon | 3 | 1.49% | 1 | 25.00% |
Eva Rachel Retuya | 2 | 1.00% | 1 | 25.00% |
Total | 201 | 100.00% | 4 | 100.00% |
#endif
static void spinand_select_chip(struct mtd_info *mtd, int dev)
{
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 13 | 100.00% | 1 | 100.00% |
Total | 13 | 100.00% | 1 | 100.00% |
static u8 spinand_read_byte(struct mtd_info *mtd)
{
struct spinand_state *state = mtd_to_state(mtd);
u8 data;
data = state->buf[state->buf_ptr];
state->buf_ptr++;
return data;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 42 | 97.67% | 1 | 50.00% |
Eva Rachel Retuya | 1 | 2.33% | 1 | 50.00% |
Total | 43 | 100.00% | 2 | 100.00% |
static int spinand_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
struct spinand_info *info = nand_get_controller_data(chip);
unsigned long timeo = jiffies;
int retval, state = chip->state;
u8 status;
if (state == FL_ERASING)
timeo += (HZ * 400) / 1000;
else
timeo += (HZ * 20) / 1000;
while (time_before(jiffies, timeo)) {
retval = spinand_read_status(info->spi, &status);
if (retval < 0) {
dev_err(&mtd->dev,
"error %d reading status register\n", retval);
return retval;
}
if ((status & STATUS_OIP_MASK) == STATUS_READY)
return 0;
cond_resched();
}
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 110 | 80.88% | 1 | 33.33% |
Devendra Naga | 23 | 16.91% | 1 | 33.33% |
Boris Brezillon | 3 | 2.21% | 1 | 33.33% |
Total | 136 | 100.00% | 3 | 100.00% |
static void spinand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
{
struct spinand_state *state = mtd_to_state(mtd);
memcpy(state->buf + state->buf_ptr, buf, len);
state->buf_ptr += len;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 49 | 98.00% | 1 | 50.00% |
Eva Rachel Retuya | 1 | 2.00% | 1 | 50.00% |
Total | 50 | 100.00% | 2 | 100.00% |
static void spinand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
{
struct spinand_state *state = mtd_to_state(mtd);
memcpy(buf, state->buf + state->buf_ptr, len);
state->buf_ptr += len;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 48 | 97.96% | 1 | 50.00% |
Eva Rachel Retuya | 1 | 2.04% | 1 | 50.00% |
Total | 49 | 100.00% | 2 | 100.00% |
/*
* spinand_reset- send RESET command "0xff" to the Nand device.
*/
static void spinand_reset(struct spi_device *spi_nand)
{
struct spinand_cmd cmd = {0};
cmd.cmd = CMD_RESET;
if (spinand_cmd(spi_nand, &cmd) < 0)
pr_info("spinand reset failed!\n");
/* elapse 1ms before issuing any other command */
usleep_range(1000, 2000);
if (wait_till_ready(spi_nand))
dev_err(&spi_nand->dev, "wait timedout!\n");
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 64 | 95.52% | 1 | 50.00% |
Eva Rachel Retuya | 3 | 4.48% | 1 | 50.00% |
Total | 67 | 100.00% | 2 | 100.00% |
static void spinand_cmdfunc(struct mtd_info *mtd, unsigned int command,
int column, int page)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct spinand_info *info = nand_get_controller_data(chip);
struct spinand_state *state = info->priv;
switch (command) {
/*
* READ0 - read in first 0x800 bytes
*/
case NAND_CMD_READ1:
case NAND_CMD_READ0:
state->buf_ptr = 0;
spinand_read_page(info->spi, page, 0x0, 0x840, state->buf);
break;
/* READOOB reads only the OOB because no ECC is performed. */
case NAND_CMD_READOOB:
state->buf_ptr = 0;
spinand_read_page(info->spi, page, 0x800, 0x40, state->buf);
break;
case NAND_CMD_RNDOUT:
state->buf_ptr = column;
break;
case NAND_CMD_READID:
state->buf_ptr = 0;
spinand_read_id(info->spi, state->buf);
break;
case NAND_CMD_PARAM:
state->buf_ptr = 0;
break;
/* ERASE1 stores the block and page address */
case NAND_CMD_ERASE1:
spinand_erase_block(info->spi, page);
break;
/* ERASE2 uses the block and page address from ERASE1 */
case NAND_CMD_ERASE2:
break;
/* SEQIN sets up the addr buffer and all registers except the length */
case NAND_CMD_SEQIN:
state->col = column;
state->row = page;
state->buf_ptr = 0;
break;
/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
case NAND_CMD_PAGEPROG:
spinand_program_page(info->spi, state->row, state->col,
state->buf_ptr, state->buf);
break;
case NAND_CMD_STATUS:
spinand_get_otp(info->spi, state->buf);
if (!(state->buf[0] & 0x80))
state->buf[0] = 0x80;
state->buf_ptr = 0;
break;
/* RESET command */
case NAND_CMD_RESET:
if (wait_till_ready(info->spi))
dev_err(&info->spi->dev, "WAIT timedout!!!\n");
/* a minimum of 250us must elapse before issuing RESET cmd*/
usleep_range(250, 1000);
spinand_reset(info->spi);
break;
default:
dev_err(&mtd->dev, "Unknown CMD: 0x%x\n", command);
}
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 315 | 97.22% | 1 | 25.00% |
Boris Brezillon | 6 | 1.85% | 2 | 50.00% |
Eva Rachel Retuya | 3 | 0.93% | 1 | 25.00% |
Total | 324 | 100.00% | 4 | 100.00% |
/**
* spinand_lock_block - send write register 0x1f command to the Nand device
*
* Description:
* After power up, all the Nand blocks are locked. This function allows
* one to unlock the blocks, and so it can be written or erased.
*/
static int spinand_lock_block(struct spi_device *spi_nand, u8 lock)
{
struct spinand_cmd cmd = {0};
int ret;
u8 otp = 0;
ret = spinand_get_otp(spi_nand, &otp);
cmd.cmd = CMD_WRITE_REG;
cmd.n_addr = 1;
cmd.addr[0] = REG_BLOCK_LOCK;
cmd.n_tx = 1;
cmd.tx_buf = &lock;
ret = spinand_cmd(spi_nand, &cmd);
if (ret < 0)
dev_err(&spi_nand->dev, "error %d lock block\n", ret);
return ret;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 105 | 100.00% | 1 | 100.00% |
Total | 105 | 100.00% | 1 | 100.00% |
/**
* spinand_probe - [spinand Interface]
* @spi_nand: registered device driver.
*
* Description:
* Set up the device driver parameters to make the device available.
*/
static int spinand_probe(struct spi_device *spi_nand)
{
struct mtd_info *mtd;
struct nand_chip *chip;
struct spinand_info *info;
struct spinand_state *state;
info = devm_kzalloc(&spi_nand->dev, sizeof(struct spinand_info),
GFP_KERNEL);
if (!info)
return -ENOMEM;
info->spi = spi_nand;
spinand_lock_block(spi_nand, BL_ALL_UNLOCKED);
state = devm_kzalloc(&spi_nand->dev, sizeof(struct spinand_state),
GFP_KERNEL);
if (!state)
return -ENOMEM;
info->priv = state;
state->buf_ptr = 0;
state->buf = devm_kzalloc(&spi_nand->dev, BUFSIZE, GFP_KERNEL);
if (!state->buf)
return -ENOMEM;
chip = devm_kzalloc(&spi_nand->dev, sizeof(struct nand_chip),
GFP_KERNEL);
if (!chip)
return -ENOMEM;
#ifdef CONFIG_MTD_SPINAND_ONDIEECC
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = 0x200;
chip->ecc.bytes = 0x6;
chip->ecc.steps = 0x4;
chip->ecc.strength = 1;
chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
chip->ecc.read_page = spinand_read_page_hwecc;
chip->ecc.write_page = spinand_write_page_hwecc;
#else
chip->ecc.mode = NAND_ECC_SOFT;
chip->ecc.algo = NAND_ECC_HAMMING;
if (spinand_disable_ecc(spi_nand) < 0)
dev_info(&spi_nand->dev, "%s: disable ecc failed!\n",
__func__);
#endif
nand_set_flash_node(chip, spi_nand->dev.of_node);
nand_set_controller_data(chip, info);
chip->read_buf = spinand_read_buf;
chip->write_buf = spinand_write_buf;
chip->read_byte = spinand_read_byte;
chip->cmdfunc = spinand_cmdfunc;
chip->waitfunc = spinand_wait;
chip->options |= NAND_CACHEPRG;
chip->select_chip = spinand_select_chip;
mtd = nand_to_mtd(chip);
dev_set_drvdata(&spi_nand->dev, mtd);
mtd->dev.parent = &spi_nand->dev;
mtd->oobsize = 64;
#ifdef CONFIG_MTD_SPINAND_ONDIEECC
mtd_set_ooblayout(mtd, &spinand_oob_64_ops);
#endif
if (nand_scan(mtd, 1))
return -ENXIO;
return mtd_device_register(mtd, NULL, 0);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 364 | 88.35% | 1 | 12.50% |
Boris Brezillon | 19 | 4.61% | 3 | 37.50% |
Brian Norris | 12 | 2.91% | 1 | 12.50% |
Rafał Miłecki | 8 | 1.94% | 1 | 12.50% |
G Pooja Shamili | 6 | 1.46% | 1 | 12.50% |
Frans Klaver | 3 | 0.73% | 1 | 12.50% |
Total | 412 | 100.00% | 8 | 100.00% |
/**
* spinand_remove - remove the device driver
* @spi: the spi device.
*
* Description:
* Remove the device driver parameters and free up allocated memories.
*/
static int spinand_remove(struct spi_device *spi)
{
mtd_device_unregister(dev_get_drvdata(&spi->dev));
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 25 | 100.00% | 1 | 100.00% |
Total | 25 | 100.00% | 1 | 100.00% |
static const struct of_device_id spinand_dt[] = {
{ .compatible = "spinand,mt29f", },
{}
};
MODULE_DEVICE_TABLE(of, spinand_dt);
/*
* Device name structure description
*/
static struct spi_driver spinand_driver = {
.driver = {
.name = "mt29f",
.of_match_table = spinand_dt,
},
.probe = spinand_probe,
.remove = spinand_remove,
};
module_spi_driver(spinand_driver);
MODULE_DESCRIPTION("SPI NAND driver for Micron");
MODULE_AUTHOR("Henry Pan <hspan@micron.com>, Kamlakant Patel <kamlakant.patel@broadcom.com>");
MODULE_LICENSE("GPL v2");
Overall Contributors
Person | Tokens | Prop | Commits | CommitProp |
Kamlakant Patel | 3773 | 92.98% | 1 | 5.00% |
Boris Brezillon | 134 | 3.30% | 5 | 25.00% |
Devendra Naga | 49 | 1.21% | 1 | 5.00% |
Manuel Pégourié-Gonnard | 35 | 0.86% | 3 | 15.00% |
Eva Rachel Retuya | 15 | 0.37% | 2 | 10.00% |
Brian Norris | 12 | 0.30% | 1 | 5.00% |
Randy Dunlap | 11 | 0.27% | 1 | 5.00% |
Rafał Miłecki | 8 | 0.20% | 1 | 5.00% |
Javier Martinez Canillas | 7 | 0.17% | 1 | 5.00% |
G Pooja Shamili | 6 | 0.15% | 1 | 5.00% |
Stephen Boyd | 3 | 0.07% | 1 | 5.00% |
Frans Klaver | 3 | 0.07% | 1 | 5.00% |
Sachin Kamat | 2 | 0.05% | 1 | 5.00% |
Total | 4058 | 100.00% | 20 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.