cregit-Linux how code gets into the kernel

Release 4.11 drivers/staging/olpc_dcon/olpc_dcon.h

#ifndef OLPC_DCON_H_

#define OLPC_DCON_H_

#include <linux/notifier.h>
#include <linux/workqueue.h>

/* DCON registers */


#define DCON_REG_ID		 0

#define DCON_REG_MODE		 1


#define MODE_PASSTHRU	(1<<0)

#define MODE_SLEEP	(1<<1)

#define MODE_SLEEP_AUTO	(1<<2)

#define MODE_BL_ENABLE	(1<<3)

#define MODE_BLANK	(1<<4)

#define MODE_CSWIZZLE	(1<<5)

#define MODE_COL_AA	(1<<6)

#define MODE_MONO_LUMA	(1<<7)

#define MODE_SCAN_INT	(1<<8)

#define MODE_CLOCKDIV	(1<<9)

#define MODE_DEBUG	(1<<14)

#define MODE_SELFTEST	(1<<15)


#define DCON_REG_HRES		0x2

#define DCON_REG_HTOTAL		0x3

#define DCON_REG_HSYNC_WIDTH	0x4

#define DCON_REG_VRES		0x5

#define DCON_REG_VTOTAL		0x6

#define DCON_REG_VSYNC_WIDTH	0x7

#define DCON_REG_TIMEOUT	0x8

#define DCON_REG_SCAN_INT	0x9

#define DCON_REG_BRIGHT		0xa

#define DCON_REG_MEM_OPT_A	0x41

#define DCON_REG_MEM_OPT_B	0x42

/* Load Delay Locked Loop (DLL) settings for clock delay */

#define MEM_DLL_CLOCK_DELAY	(1<<0)
/* Memory controller power down function */

#define MEM_POWER_DOWN		(1<<8)
/* Memory controller software reset */

#define MEM_SOFT_RESET		(1<<0)

/* Status values */


#define DCONSTAT_SCANINT	0

#define DCONSTAT_SCANINT_DCON	1

#define DCONSTAT_DISPLAYLOAD	2

#define DCONSTAT_MISSED		3

/* Source values */


#define DCON_SOURCE_DCON        0

#define DCON_SOURCE_CPU         1

/* Interrupt */

#define DCON_IRQ                6


struct dcon_priv {
	
struct i2c_client *client;
	
struct fb_info *fbinfo;
	
struct backlight_device *bl_dev;

	
wait_queue_head_t waitq;
	
struct work_struct switch_source;
	
struct notifier_block reboot_nb;

	/* Shadow register for the DCON_REG_MODE register */
	
u8 disp_mode;

	/* The current backlight value - this saves us some smbus traffic */
	
u8 bl_val;

	/* Current source, initialized at probe time */
	
int curr_src;

	/* Desired source */
	
int pending_src;

	/* Variables used during switches */
	
bool switched;
	
ktime_t irq_time;
	
ktime_t load_time;

	/* Current output type; true == mono, false == color */
	
bool mono;
	
bool asleep;
	/* This get set while controlling fb blank state from the driver */
	
bool ignore_fb_events;
};


struct dcon_platform_data {
	
int (*init)(struct dcon_priv *);
	
void (*bus_stabilize_wiggle)(void);
	
void (*set_dconload)(int);
	
int (*read_status)(u8 *);
};

#include <linux/interrupt.h>

irqreturn_t dcon_interrupt(int irq, void *id);

#ifdef CONFIG_FB_OLPC_DCON_1
extern struct dcon_platform_data dcon_pdata_xo_1;
#endif

#ifdef CONFIG_FB_OLPC_DCON_1_5
extern struct dcon_platform_data dcon_pdata_xo_1_5;
#endif

#endif

Overall Contributors

PersonTokensPropCommitsCommitProp
Greg Kroah-Hartman307100.00%1100.00%
Total307100.00%1100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.