Release 4.11 drivers/staging/rts5208/ms.h

Directory: drivers/staging/rts5208
/* Driver for Realtek PCI-Express card reader
 * Header file
 *
 * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, see <http://www.gnu.org/licenses/>.
 *
 * Author:
 *   Wei WANG (wei_wang@realsil.com.cn)
 *   Micky Ching (micky_ching@realsil.com.cn)
 */

#ifndef __REALTEK_RTSX_MS_H

#define __REALTEK_RTSX_MS_H


#define MS_DELAY_WRITE


#define	MS_MAX_RETRY_COUNT	3


#define	MS_EXTRA_SIZE		0x9


#define	WRT_PRTCT		0x01

/* Error Code */

#define	MS_NO_ERROR				0x00

#define	MS_CRC16_ERROR				0x80

#define	MS_TO_ERROR				0x40

#define	MS_NO_CARD				0x20

#define	MS_NO_MEMORY				0x10

#define	MS_CMD_NK				0x08

#define	MS_FLASH_READ_ERROR			0x04

#define	MS_FLASH_WRITE_ERROR			0x02

#define	MS_BREQ_ERROR				0x01

#define	MS_NOT_FOUND				0x03

/* Transfer Protocol Command */

#define READ_PAGE_DATA				0x02

#define READ_REG				0x04

#define	GET_INT					0x07

#define WRITE_PAGE_DATA				0x0D

#define WRITE_REG				0x0B

#define SET_RW_REG_ADRS				0x08

#define SET_CMD					0x0E


#define	PRO_READ_LONG_DATA			0x02

#define	PRO_READ_SHORT_DATA			0x03

#define PRO_READ_REG				0x04

#define	PRO_READ_QUAD_DATA			0x05

#define PRO_GET_INT				0x07

#define	PRO_WRITE_LONG_DATA			0x0D

#define	PRO_WRITE_SHORT_DATA			0x0C

#define	PRO_WRITE_QUAD_DATA			0x0A

#define PRO_WRITE_REG				0x0B

#define PRO_SET_RW_REG_ADRS			0x08

#define PRO_SET_CMD				0x0E

#define PRO_EX_SET_CMD				0x09

#ifdef SUPPORT_MAGIC_GATE


#define MG_GET_ID		0x40

#define MG_SET_LID		0x41

#define MG_GET_LEKB		0x42

#define MG_SET_RD		0x43

#define MG_MAKE_RMS		0x44

#define MG_MAKE_KSE		0x45

#define MG_SET_IBD		0x46

#define MG_GET_IBD		0x47

#endif

#ifdef XC_POWERCLASS

#define XC_CHG_POWER		0x16
#endif


#define BLOCK_READ	0xAA

#define	BLOCK_WRITE	0x55

#define BLOCK_END	0x33

#define BLOCK_ERASE	0x99

#define FLASH_STOP	0xCC


#define SLEEP		0x5A

#define CLEAR_BUF	0xC3

#define MS_RESET	0x3C


#define PRO_READ_DATA		0x20

#define	PRO_WRITE_DATA		0x21

#define PRO_READ_ATRB		0x24

#define PRO_STOP		0x25

#define PRO_ERASE		0x26

#define	PRO_READ_2K_DATA	0x27

#define	PRO_WRITE_2K_DATA	0x28


#define PRO_FORMAT		0x10

#define PRO_SLEEP		0x11


#define	IntReg			0x01

#define StatusReg0		0x02

#define StatusReg1		0x03


#define SystemParm		0x10

#define BlockAdrs		0x11

#define CMDParm			0x14

#define PageAdrs		0x15


#define OverwriteFlag		0x16

#define ManagemenFlag		0x17

#define LogicalAdrs		0x18

#define ReserveArea		0x1A


#define	Pro_IntReg		0x01

#define Pro_StatusReg		0x02

#define Pro_TypeReg		0x04

#define	Pro_IFModeReg		0x05

#define Pro_CatagoryReg		0x06

#define Pro_ClassReg		0x07


#define Pro_SystemParm		0x10

#define Pro_DataCount1		0x11

#define Pro_DataCount0		0x12

#define Pro_DataAddr3		0x13

#define Pro_DataAddr2		0x14

#define Pro_DataAddr1		0x15

#define Pro_DataAddr0		0x16


#define Pro_TPCParm		0x17

#define Pro_CMDParm		0x18


#define	INT_REG_CED		0x80

#define	INT_REG_ERR		0x40

#define	INT_REG_BREQ		0x20

#define	INT_REG_CMDNK		0x01


#define	BLOCK_BOOT		0xC0

#define	BLOCK_OK		0x80

#define	PAGE_OK			0x60

#define	DATA_COMPL		0x10


#define	NOT_BOOT_BLOCK		0x4

#define	NOT_TRANSLATION_TABLE	0x8


#define	HEADER_ID0		PPBUF_BASE2

#define	HEADER_ID1		(PPBUF_BASE2 + 1)

#define	DISABLED_BLOCK0		(PPBUF_BASE2 + 0x170 + 4)

#define	DISABLED_BLOCK1		(PPBUF_BASE2 + 0x170 + 5)

#define	DISABLED_BLOCK2		(PPBUF_BASE2 + 0x170 + 6)

#define	DISABLED_BLOCK3		(PPBUF_BASE2 + 0x170 + 7)

#define	BLOCK_SIZE_0		(PPBUF_BASE2 + 0x1a0 + 2)

#define	BLOCK_SIZE_1		(PPBUF_BASE2 + 0x1a0 + 3)

#define	BLOCK_COUNT_0		(PPBUF_BASE2 + 0x1a0 + 4)

#define	BLOCK_COUNT_1		(PPBUF_BASE2 + 0x1a0 + 5)

#define	EBLOCK_COUNT_0		(PPBUF_BASE2 + 0x1a0 + 6)

#define	EBLOCK_COUNT_1		(PPBUF_BASE2 + 0x1a0 + 7)

#define	PAGE_SIZE_0		(PPBUF_BASE2 + 0x1a0 + 8)

#define	PAGE_SIZE_1		(PPBUF_BASE2 + 0x1a0 + 9)


#define MS_Device_Type		(PPBUF_BASE2 + 0x1D8)


#define	MS_4bit_Support		(PPBUF_BASE2 + 0x1D3)


#define setPS_NG	1

#define setPS_Error	0


#define	PARALLEL_8BIT_IF	0x40

#define	PARALLEL_4BIT_IF	0x00

#define	SERIAL_IF		0x80


#define BUF_FULL	0x10

#define BUF_EMPTY	0x20


#define	MEDIA_BUSY	0x80

#define	FLASH_BUSY	0x40

#define	DATA_ERROR	0x20

#define	STS_UCDT	0x10

#define	EXTRA_ERROR	0x08

#define	STS_UCEX	0x04

#define	FLAG_ERROR	0x02

#define	STS_UCFG	0x01


#define MS_SHORT_DATA_LEN	32


#define FORMAT_SUCCESS		0

#define FORMAT_FAIL		1

#define FORMAT_IN_PROGRESS	2


#define	MS_SET_BAD_BLOCK_FLG(ms_card)	((ms_card)->multi_flag |= 0x80)

#define MS_CLR_BAD_BLOCK_FLG(ms_card)	((ms_card)->multi_flag &= 0x7F)

#define MS_TST_BAD_BLOCK_FLG(ms_card)	((ms_card)->multi_flag & 0x80)

void mspro_polling_format_status(struct rtsx_chip *chip);

void mspro_stop_seq_mode(struct rtsx_chip *chip);
int reset_ms_card(struct rtsx_chip *chip);
int ms_rw(struct scsi_cmnd *srb, struct rtsx_chip *chip,
	  u32 start_sector, u16 sector_cnt);
int mspro_format(struct scsi_cmnd *srb, struct rtsx_chip *chip,
		 int short_data_len, bool quick_format);
void ms_free_l2p_tbl(struct rtsx_chip *chip);
void ms_cleanup_work(struct rtsx_chip *chip);
int ms_power_off_card3v3(struct rtsx_chip *chip);
int release_ms_card(struct rtsx_chip *chip);
#ifdef MS_DELAY_WRITE
int ms_delay_write(struct rtsx_chip *chip);
#endif

#ifdef SUPPORT_MAGIC_GATE
int mg_set_leaf_id(struct scsi_cmnd *srb, struct rtsx_chip *chip);
int mg_get_local_EKB(struct scsi_cmnd *srb, struct rtsx_chip *chip);
int mg_chg(struct scsi_cmnd *srb, struct rtsx_chip *chip);
int mg_get_rsp_chg(struct scsi_cmnd *srb, struct rtsx_chip *chip);
int mg_rsp(struct scsi_cmnd *srb, struct rtsx_chip *chip);
int mg_get_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip);
int mg_set_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip);
#endif

#endif  /* __REALTEK_RTSX_MS_H */
Overall Contributors
Person Tokens Prop Commits CommitProp
Micky Ching 781 99.87% 1 50.00%
Quentin Lambert 1 0.13% 1 50.00%
Total 782 100.00% 2 100.00%
Directory: drivers/staging/rts5208

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.
Person	Tokens	Prop	Commits	CommitProp
Micky Ching	781	99.87%	1	50.00%
Quentin Lambert	1	0.13%	1	50.00%
Total	782	100.00%	2	100.00%
cregit-Linux how code gets into the kernel

Release 4.11 drivers/staging/rts5208/ms.h

Overall Contributors
