cregit-Linux how code gets into the kernel

Release 4.11 drivers/tty/serial/mcf.c

/****************************************************************************/

/*
 *      mcf.c -- Freescale ColdFire UART driver
 *
 *      (C) Copyright 2003-2007, Greg Ungerer <gerg@uclinux.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

/****************************************************************************/

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/console.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/nettel.h>

/****************************************************************************/

/*
 *      Some boards implement the DTR/DCD lines using GPIO lines, most
 *      don't. Dummy out the access macros for those that don't. Those
 *      that do should define these macros somewhere in there board
 *      specific inlude files.
 */
#if !defined(mcf_getppdcd)

#define	mcf_getppdcd(p)		(1)
#endif
#if !defined(mcf_getppdtr)

#define	mcf_getppdtr(p)		(1)
#endif
#if !defined(mcf_setppdtr)

#define	mcf_setppdtr(p, v)	do { } while (0)
#endif

/****************************************************************************/

/*
 *      Local per-uart structure.
 */

struct mcf_uart {
	
struct uart_port	port;
	
unsigned int		sigs;		/* Local copy of line sigs */
	
unsigned char		imr;		/* Local IMR mirror */
};

/****************************************************************************/


static unsigned int mcf_tx_empty(struct uart_port *port) { return (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXEMPTY) ? TIOCSER_TEMT : 0; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer30100.00%1100.00%
Total30100.00%1100.00%

/****************************************************************************/
static unsigned int mcf_get_mctrl(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); unsigned int sigs; sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS; sigs |= (pp->sigs & TIOCM_RTS); sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0); sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0); return sigs; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer93100.00%2100.00%
Total93100.00%2100.00%

/****************************************************************************/
static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); pp->sigs = sigs; mcf_setppdtr(port->line, (sigs & TIOCM_DTR)); if (sigs & TIOCM_RTS) writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); else writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0); }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer78100.00%2100.00%
Total78100.00%2100.00%

/****************************************************************************/
static void mcf_start_tx(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); if (port->rs485.flags & SER_RS485_ENABLED) { /* Enable Transmitter */ writeb(MCFUART_UCR_TXENABLE, port->membase + MCFUART_UCR); /* Manually assert RTS */ writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); } pp->imr |= MCFUART_UIR_TXREADY; writeb(pp->imr, port->membase + MCFUART_UIMR); }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer4555.56%250.00%
Quoc-Viet Nguyen3543.21%125.00%
Ricardo Ribalda Delgado11.23%125.00%
Total81100.00%4100.00%

/****************************************************************************/
static void mcf_stop_tx(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); pp->imr &= ~MCFUART_UIR_TXREADY; writeb(pp->imr, port->membase + MCFUART_UIMR); }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer46100.00%2100.00%
Total46100.00%2100.00%

/****************************************************************************/
static void mcf_stop_rx(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); pp->imr &= ~MCFUART_UIR_RXREADY; writeb(pp->imr, port->membase + MCFUART_UIMR); }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer46100.00%2100.00%
Total46100.00%2100.00%

/****************************************************************************/
static void mcf_break_ctl(struct uart_port *port, int break_state) { unsigned long flags; spin_lock_irqsave(&port->lock, flags); if (break_state == -1) writeb(MCFUART_UCR_CMDBREAKSTART, port->membase + MCFUART_UCR); else writeb(MCFUART_UCR_CMDBREAKSTOP, port->membase + MCFUART_UCR); spin_unlock_irqrestore(&port->lock, flags); }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer68100.00%1100.00%
Total68100.00%1100.00%

/****************************************************************************/
static int mcf_startup(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); unsigned long flags; spin_lock_irqsave(&port->lock, flags); /* Reset UART, get it into known state... */ writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); /* Enable the UART transmitter and receiver */ writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, port->membase + MCFUART_UCR); /* Enable RX interrupts now */ pp->imr = MCFUART_UIR_RXREADY; writeb(pp->imr, port->membase + MCFUART_UIMR); spin_unlock_irqrestore(&port->lock, flags); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer110100.00%2100.00%
Total110100.00%2100.00%

/****************************************************************************/
static void mcf_shutdown(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); unsigned long flags; spin_lock_irqsave(&port->lock, flags); /* Disable all interrupts now */ pp->imr = 0; writeb(pp->imr, port->membase + MCFUART_UIMR); /* Disable UART transmitter and receiver */ writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); spin_unlock_irqrestore(&port->lock, flags); }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer93100.00%2100.00%
Total93100.00%2100.00%

/****************************************************************************/
static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { unsigned long flags; unsigned int baud, baudclk; #if defined(CONFIG_M5272) unsigned int baudfr; #endif unsigned char mr1, mr2; baud = uart_get_baud_rate(port, termios, old, 0, 230400); #if defined(CONFIG_M5272) baudclk = (MCF_BUSCLK / baud) / 32; baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16; #else baudclk = ((MCF_BUSCLK / baud) + 16) / 32; #endif mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; mr2 = 0; switch (termios->c_cflag & CSIZE) { case CS5: mr1 |= MCFUART_MR1_CS5; break; case CS6: mr1 |= MCFUART_MR1_CS6; break; case CS7: mr1 |= MCFUART_MR1_CS7; break; case CS8: default: mr1 |= MCFUART_MR1_CS8; break; } if (termios->c_cflag & PARENB) { if (termios->c_cflag & CMSPAR) { if (termios->c_cflag & PARODD) mr1 |= MCFUART_MR1_PARITYMARK; else mr1 |= MCFUART_MR1_PARITYSPACE; } else { if (termios->c_cflag & PARODD) mr1 |= MCFUART_MR1_PARITYODD; else mr1 |= MCFUART_MR1_PARITYEVEN; } } else { mr1 |= MCFUART_MR1_PARITYNONE; } /* * FIXME: port->read_status_mask and port->ignore_status_mask * need to be initialized based on termios settings for * INPCK, IGNBRK, IGNPAR, PARMRK, BRKINT */ if (termios->c_cflag & CSTOPB) mr2 |= MCFUART_MR2_STOP2; else mr2 |= MCFUART_MR2_STOP1; if (termios->c_cflag & CRTSCTS) { mr1 |= MCFUART_MR1_RXRTS; mr2 |= MCFUART_MR2_TXCTS; } spin_lock_irqsave(&port->lock, flags); if (port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); mr2 |= MCFUART_MR2_TXRTS; } uart_update_timeout(port, termios->c_cflag, baud); writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR); writeb(mr1, port->membase + MCFUART_UMR); writeb(mr2, port->membase + MCFUART_UMR); writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1); writeb((baudclk & 0xff), port->membase + MCFUART_UBG2); #if defined(CONFIG_M5272) writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD); #endif writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER, port->membase + MCFUART_UCSR); writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, port->membase + MCFUART_UCR); spin_unlock_irqrestore(&port->lock, flags); }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer34173.97%114.29%
John Adamson7315.84%114.29%
Quoc-Viet Nguyen245.21%114.29%
Ricardo Ribalda Delgado112.39%228.57%
Philippe De Muyter112.39%114.29%
Peter Hurley10.22%114.29%
Total461100.00%7100.00%

/****************************************************************************/
static void mcf_rx_chars(struct mcf_uart *pp) { struct uart_port *port = &pp->port; unsigned char status, ch, flag; while ((status = readb(port->membase + MCFUART_USR)) & MCFUART_USR_RXREADY) { ch = readb(port->membase + MCFUART_URB); flag = TTY_NORMAL; port->icount.rx++; if (status & MCFUART_USR_RXERR) { writeb(MCFUART_UCR_CMDRESETERR, port->membase + MCFUART_UCR); if (status & MCFUART_USR_RXBREAK) { port->icount.brk++; if (uart_handle_break(port)) continue; } else if (status & MCFUART_USR_RXPARITY) { port->icount.parity++; } else if (status & MCFUART_USR_RXOVERRUN) { port->icount.overrun++; } else if (status & MCFUART_USR_RXFRAMING) { port->icount.frame++; } status &= port->read_status_mask; if (status & MCFUART_USR_RXBREAK) flag = TTY_BREAK; else if (status & MCFUART_USR_RXPARITY) flag = TTY_PARITY; else if (status & MCFUART_USR_RXFRAMING) flag = TTY_FRAME; } if (uart_handle_sysrq_char(port, ch)) continue; uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag); } spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); spin_lock(&port->lock); }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer22892.31%233.33%
Viresh Kumar166.48%116.67%
Takashi Iwai10.40%116.67%
Jiri Slaby10.40%116.67%
Alan Cox10.40%116.67%
Total247100.00%6100.00%

/****************************************************************************/
static void mcf_tx_chars(struct mcf_uart *pp) { struct uart_port *port = &pp->port; struct circ_buf *xmit = &port->state->xmit; if (port->x_char) { /* Send special char - probably flow control */ writeb(port->x_char, port->membase + MCFUART_UTB); port->x_char = 0; port->icount.tx++; return; } while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) { if (xmit->head == xmit->tail) break; writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); port->icount.tx++; } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); if (xmit->head == xmit->tail) { pp->imr &= ~MCFUART_UIR_TXREADY; writeb(pp->imr, port->membase + MCFUART_UIMR); /* Disable TX to negate RTS automatically */ if (port->rs485.flags & SER_RS485_ENABLED) writeb(MCFUART_UCR_TXDISABLE, port->membase + MCFUART_UCR); } }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer18388.83%240.00%
Quoc-Viet Nguyen2110.19%120.00%
Alan Cox10.49%120.00%
Ricardo Ribalda Delgado10.49%120.00%
Total206100.00%5100.00%

/****************************************************************************/
static irqreturn_t mcf_interrupt(int irq, void *data) { struct uart_port *port = data; struct mcf_uart *pp = container_of(port, struct mcf_uart, port); unsigned int isr; irqreturn_t ret = IRQ_NONE; isr = readb(port->membase + MCFUART_UISR) & pp->imr; spin_lock(&port->lock); if (isr & MCFUART_UIR_RXREADY) { mcf_rx_chars(pp); ret = IRQ_HANDLED; } if (isr & MCFUART_UIR_TXREADY) { mcf_tx_chars(pp); ret = IRQ_HANDLED; } spin_unlock(&port->lock); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer7869.64%266.67%
Yury Georgievskiy3430.36%133.33%
Total112100.00%3100.00%

/****************************************************************************/
static void mcf_config_port(struct uart_port *port, int flags) { port->type = PORT_MCF; port->fifosize = MCFUART_TXFIFOSIZE; /* Clear mask, so no surprise interrupts. */ writeb(0, port->membase + MCFUART_UIMR); if (request_irq(port->irq, mcf_interrupt, 0, "UART", port)) printk(KERN_ERR "MCF: unable to attach ColdFire UART %d " "interrupt vector=%d\n", port->line, port->irq); }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer6390.00%133.33%
Philippe De Muyter68.57%133.33%
Yong Zhang11.43%133.33%
Total70100.00%3100.00%

/****************************************************************************/
static const char *mcf_type(struct uart_port *port) { return (port->type == PORT_MCF) ? "ColdFire UART" : NULL; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer26100.00%1100.00%
Total26100.00%1100.00%

/****************************************************************************/
static int mcf_request_port(struct uart_port *port) { /* UARTs always present */ return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer15100.00%1100.00%
Total15100.00%1100.00%

/****************************************************************************/
static void mcf_release_port(struct uart_port *port) { /* Nothing to release... */ }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer12100.00%1100.00%
Total12100.00%1100.00%

/****************************************************************************/
static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) { if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_MCF)) return -EINVAL; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer41100.00%1100.00%
Total41100.00%1100.00%

/****************************************************************************/ /* Enable or disable the RS485 support */
static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) { unsigned char mr1, mr2; /* Get mode registers */ mr1 = readb(port->membase + MCFUART_UMR); mr2 = readb(port->membase + MCFUART_UMR); if (rs485->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); /* Automatically negate RTS after TX completes */ mr2 |= MCFUART_MR2_TXRTS; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); mr2 &= ~MCFUART_MR2_TXRTS; } writeb(mr1, port->membase + MCFUART_UMR); writeb(mr2, port->membase + MCFUART_UMR); port->rs485 = *rs485; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Quoc-Viet Nguyen11698.31%150.00%
Ricardo Ribalda Delgado21.69%150.00%
Total118100.00%2100.00%

/****************************************************************************/ /* * Define the basic serial functions we support. */ static const struct uart_ops mcf_uart_ops = { .tx_empty = mcf_tx_empty, .get_mctrl = mcf_get_mctrl, .set_mctrl = mcf_set_mctrl, .start_tx = mcf_start_tx, .stop_tx = mcf_stop_tx, .stop_rx = mcf_stop_rx, .break_ctl = mcf_break_ctl, .startup = mcf_startup, .shutdown = mcf_shutdown, .set_termios = mcf_set_termios, .type = mcf_type, .request_port = mcf_request_port, .release_port = mcf_release_port, .config_port = mcf_config_port, .verify_port = mcf_verify_port, }; static struct mcf_uart mcf_ports[4]; #define MCF_MAXPORTS ARRAY_SIZE(mcf_ports) /****************************************************************************/ #if defined(CONFIG_SERIAL_MCF_CONSOLE) /****************************************************************************/
int __init early_mcf_setup(struct mcf_platform_uart *platp) { struct uart_port *port; int i; for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { port = &mcf_ports[i].port; port->line = i; port->type = PORT_MCF; port->mapbase = platp[i].mapbase; port->membase = (platp[i].membase) ? platp[i].membase : (unsigned char __iomem *) port->mapbase; port->iotype = SERIAL_IO_MEM; port->irq = platp[i].irq; port->uartclk = MCF_BUSCLK; port->flags = UPF_BOOT_AUTOCONF; port->rs485_config = mcf_config_rs485; port->ops = &mcf_uart_ops; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer14895.48%133.33%
Ricardo Ribalda Delgado63.87%133.33%
Peter Hurley10.65%133.33%
Total155100.00%3100.00%

/****************************************************************************/
static void mcf_console_putc(struct console *co, const char c) { struct uart_port *port = &(mcf_ports + co->index)->port; int i; for (i = 0; (i < 0x10000); i++) { if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) break; } writeb(c, port->membase + MCFUART_UTB); for (i = 0; (i < 0x10000); i++) { if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) break; } }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer107100.00%1100.00%
Total107100.00%1100.00%

/****************************************************************************/
static void mcf_console_write(struct console *co, const char *s, unsigned int count) { for (; (count); count--, s++) { mcf_console_putc(co, *s); if (*s == '\n') mcf_console_putc(co, '\r'); } }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer57100.00%1100.00%
Total57100.00%1100.00%

/****************************************************************************/
static int __init mcf_console_setup(struct console *co, char *options) { struct uart_port *port; int baud = CONFIG_SERIAL_MCF_BAUDRATE; int bits = 8; int parity = 'n'; int flow = 'n'; if ((co->index < 0) || (co->index >= MCF_MAXPORTS)) co->index = 0; port = &mcf_ports[co->index].port; if (port->membase == 0) return -ENODEV; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); return uart_set_options(port, co, baud, parity, bits, flow); }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer12397.62%150.00%
Lennart Sorensen32.38%150.00%
Total126100.00%2100.00%

/****************************************************************************/ static struct uart_driver mcf_driver; static struct console mcf_console = { .name = "ttyS", .write = mcf_console_write, .device = uart_console_device, .setup = mcf_console_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &mcf_driver, };
static int __init mcf_console_init(void) { register_console(&mcf_console); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer18100.00%1100.00%
Total18100.00%1100.00%

console_initcall(mcf_console_init); #define MCF_CONSOLE &mcf_console /****************************************************************************/ #else /****************************************************************************/ #define MCF_CONSOLE NULL /****************************************************************************/ #endif /* CONFIG_SERIAL_MCF_CONSOLE */ /****************************************************************************/ /* * Define the mcf UART driver structure. */ static struct uart_driver mcf_driver = { .owner = THIS_MODULE, .driver_name = "mcf", .dev_name = "ttyS", .major = TTY_MAJOR, .minor = 64, .nr = MCF_MAXPORTS, .cons = MCF_CONSOLE, }; /****************************************************************************/
static int mcf_probe(struct platform_device *pdev) { struct mcf_platform_uart *platp = dev_get_platdata(&pdev->dev); struct uart_port *port; int i; for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { port = &mcf_ports[i].port; port->line = i; port->type = PORT_MCF; port->mapbase = platp[i].mapbase; port->membase = (platp[i].membase) ? platp[i].membase : (unsigned char __iomem *) platp[i].mapbase; port->dev = &pdev->dev; port->iotype = SERIAL_IO_MEM; port->irq = platp[i].irq; port->uartclk = MCF_BUSCLK; port->ops = &mcf_uart_ops; port->flags = UPF_BOOT_AUTOCONF; port->rs485_config = mcf_config_rs485; uart_add_one_port(&mcf_driver, port); } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer17794.15%240.00%
Ricardo Ribalda Delgado63.19%120.00%
Jingoo Han42.13%120.00%
Peter Hurley10.53%120.00%
Total188100.00%5100.00%

/****************************************************************************/
static int mcf_remove(struct platform_device *pdev) { struct uart_port *port; int i; for (i = 0; (i < MCF_MAXPORTS); i++) { port = &mcf_ports[i].port; if (port) uart_remove_one_port(&mcf_driver, port); } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer61100.00%1100.00%
Total61100.00%1100.00%

/****************************************************************************/ static struct platform_driver mcf_platform_driver = { .probe = mcf_probe, .remove = mcf_remove, .driver = { .name = "mcfuart", }, }; /****************************************************************************/
static int __init mcf_init(void) { int rc; printk("ColdFire internal UART serial driver\n"); rc = uart_register_driver(&mcf_driver); if (rc) return rc; rc = platform_driver_register(&mcf_platform_driver); if (rc) { uart_unregister_driver(&mcf_driver); return rc; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer5086.21%150.00%
Wei Yongjun813.79%150.00%
Total58100.00%2100.00%

/****************************************************************************/
static void __exit mcf_exit(void) { platform_driver_unregister(&mcf_platform_driver); uart_unregister_driver(&mcf_driver); }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer21100.00%1100.00%
Total21100.00%1100.00%

/****************************************************************************/ module_init(mcf_init); module_exit(mcf_exit); MODULE_AUTHOR("Greg Ungerer <gerg@uclinux.org>"); MODULE_DESCRIPTION("Freescale ColdFire UART driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:mcfuart"); /****************************************************************************/

Overall Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer277387.34%520.83%
Quoc-Viet Nguyen2016.33%14.17%
John Adamson732.30%14.17%
Yury Georgievskiy341.07%14.17%
Ricardo Ribalda Delgado270.85%28.33%
Philippe De Muyter190.60%28.33%
Viresh Kumar160.50%14.17%
Wei Yongjun80.25%14.17%
Jingoo Han70.22%14.17%
Kay Sievers50.16%14.17%
Peter Hurley30.09%28.33%
Lennart Sorensen30.09%14.17%
Alan Cox20.06%14.17%
Takashi Iwai10.03%14.17%
Jiri Slaby10.03%14.17%
Yong Zhang10.03%14.17%
Valentin Rothberg10.03%14.17%
Total3175100.00%24100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.