Release 4.11 drivers/tty/serial/timbuart.c

Directory: drivers/tty/serial
/*
 * timbuart.c timberdale FPGA UART driver
 * Copyright (c) 2009 Intel Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

/* Supports:
 * Timberdale FPGA UART
 */

#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/module.h>

#include "timbuart.h"


struct timbuart_port {
	
struct uart_port	port;
	
struct tasklet_struct	tasklet;
	
int			usedma;
	
u32			last_ier;
	
struct platform_device  *dev;
};


static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
	921600, 1843200, 3250000};

static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier);

static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);



static void timbuart_stop_rx(struct uart_port *port)
{
	/* spin lock held by upper layer, disable all RX interrupts */
	u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
	iowrite32(ier, port->membase + TIMBUART_IER);
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 38 100.00% 2 100.00%
Total 38 100.00% 2 100.00%



static void timbuart_stop_tx(struct uart_port *port)
{
	/* spinlock held by upper layer, disable TX interrupt */
	u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
	iowrite32(ier, port->membase + TIMBUART_IER);
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 38 100.00% 2 100.00%
Total 38 100.00% 2 100.00%



static void timbuart_start_tx(struct uart_port *port)
{
	struct timbuart_port *uart =
		container_of(port, struct timbuart_port, port);

	/* do not transfer anything here -> fire off the tasklet */
	tasklet_schedule(&uart->tasklet);
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 35 100.00% 1 100.00%
Total 35 100.00% 1 100.00%



static unsigned int timbuart_tx_empty(struct uart_port *port)
{
	u32 isr = ioread32(port->membase + TIMBUART_ISR);

	return (isr & TXBE) ? TIOCSER_TEMT : 0;
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 35 100.00% 1 100.00%
Total 35 100.00% 1 100.00%



static void timbuart_flush_buffer(struct uart_port *port)
{
	if (!timbuart_tx_empty(port)) {
		u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
			TIMBUART_CTRL_FLSHTX;

		iowrite8(ctl, port->membase + TIMBUART_CTRL);
		iowrite32(TXBF, port->membase + TIMBUART_ISR);
	}
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 57 100.00% 3 100.00%
Total 57 100.00% 3 100.00%



static void timbuart_rx_chars(struct uart_port *port)
{
	struct tty_port *tport = &port->state->port;

	while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
		u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
		port->icount.rx++;
		tty_insert_flip_char(tport, ch, TTY_NORMAL);
	}

	spin_unlock(&port->lock);
	tty_flip_buffer_push(tport);
	spin_lock(&port->lock);

	dev_dbg(port->dev, "%s - total read %d bytes\n",
		__func__, port->icount.rx);
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 98 94.23% 2 40.00%
Jiri Slaby 5 4.81% 2 40.00%
Alan Cox 1 0.96% 1 20.00%
Total 104 100.00% 5 100.00%



static void timbuart_tx_chars(struct uart_port *port)
{
	struct circ_buf *xmit = &port->state->xmit;

	while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
		!uart_circ_empty(xmit)) {
		iowrite8(xmit->buf[xmit->tail],
			port->membase + TIMBUART_TXFIFO);
		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
		port->icount.tx++;
	}

	dev_dbg(port->dev,
		"%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
		 __func__,
		port->icount.tx,
		ioread8(port->membase + TIMBUART_CTRL),
		port->mctrl & TIOCM_RTS,
		ioread8(port->membase + TIMBUART_BAUDRATE));
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 130 99.24% 2 66.67%
Alan Cox 1 0.76% 1 33.33%
Total 131 100.00% 3 100.00%



static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
{
	struct timbuart_port *uart =
		container_of(port, struct timbuart_port, port);
	struct circ_buf *xmit = &port->state->xmit;

	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
		return;

	if (port->x_char)
		return;

	if (isr & TXFLAGS) {
		timbuart_tx_chars(port);
		/* clear all TX interrupts */
		iowrite32(TXFLAGS, port->membase + TIMBUART_ISR);

		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
			uart_write_wakeup(port);
	} else
		/* Re-enable any tx interrupt */
		*ier |= uart->last_ier & TXFLAGS;

	/* enable interrupts if there are chars in the transmit buffer,
         * Or if we delivered some bytes and want the almost empty interrupt
         * we wake up the upper layer later when we got the interrupt
         * to give it some time to go out...
         */
	if (!uart_circ_empty(xmit))
		*ier |= TXBAE;

	dev_dbg(port->dev, "%s - leaving\n", __func__);
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 139 99.29% 2 66.67%
Alan Cox 1 0.71% 1 33.33%
Total 140 100.00% 3 100.00%



static void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier)
{
	if (isr & RXFLAGS) {
		/* Some RX status is set */
		if (isr & RXBF) {
			u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
				TIMBUART_CTRL_FLSHRX;
			iowrite8(ctl, port->membase + TIMBUART_CTRL);
			port->icount.overrun++;
		} else if (isr & (RXDP))
			timbuart_rx_chars(port);

		/* ack all RX interrupts */
		iowrite32(RXFLAGS, port->membase + TIMBUART_ISR);
	}

	/* always have the RX interrupts enabled */
	*ier |= RXBAF | RXBF | RXTT;

	dev_dbg(port->dev, "%s - leaving\n", __func__);
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 113 99.12% 2 66.67%
Jingoo Han 1 0.88% 1 33.33%
Total 114 100.00% 3 100.00%



static void timbuart_tasklet(unsigned long arg)
{
	struct timbuart_port *uart = (struct timbuart_port *)arg;
	u32 isr, ier = 0;

	spin_lock(&uart->port.lock);

	isr = ioread32(uart->port.membase + TIMBUART_ISR);
	dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);

	if (!uart->usedma)
		timbuart_handle_tx_port(&uart->port, isr, &ier);

	timbuart_mctrl_check(&uart->port, isr, &ier);

	if (!uart->usedma)
		timbuart_handle_rx_port(&uart->port, isr, &ier);

	iowrite32(ier, uart->port.membase + TIMBUART_IER);

	spin_unlock(&uart->port.lock);
	dev_dbg(uart->port.dev, "%s leaving\n", __func__);
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 155 99.36% 2 66.67%
Jingoo Han 1 0.64% 1 33.33%
Total 156 100.00% 3 100.00%



static unsigned int timbuart_get_mctrl(struct uart_port *port)
{
	u8 cts = ioread8(port->membase + TIMBUART_CTRL);
	dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);

	if (cts & TIMBUART_CTRL_CTS)
		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
	else
		return TIOCM_DSR | TIOCM_CAR;
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 56 100.00% 1 100.00%
Total 56 100.00% 1 100.00%



static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
	dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);

	if (mctrl & TIOCM_RTS)
		iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
	else
		iowrite8(0, port->membase + TIMBUART_CTRL);
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 56 98.25% 1 50.00%
Roel Kluin 1 1.75% 1 50.00%
Total 57 100.00% 2 100.00%



static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
{
	unsigned int cts;

	if (isr & CTS_DELTA) {
		/* ack */
		iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
		cts = timbuart_get_mctrl(port);
		uart_handle_cts_change(port, cts & TIOCM_CTS);
		wake_up_interruptible(&port->state->port.delta_msr_wait);
	}

	*ier |= CTS_DELTA;
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 72 96.00% 2 50.00%
Alan Cox 3 4.00% 2 50.00%
Total 75 100.00% 4 100.00%



static void timbuart_break_ctl(struct uart_port *port, int ctl)
{
	/* N/A */
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 15 100.00% 1 100.00%
Total 15 100.00% 1 100.00%



static int timbuart_startup(struct uart_port *port)
{
	struct timbuart_port *uart =
		container_of(port, struct timbuart_port, port);

	dev_dbg(port->dev, "%s\n", __func__);

	iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
	iowrite32(0x1ff, port->membase + TIMBUART_ISR);
	/* Enable all but TX interrupts */
	iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA,
		port->membase + TIMBUART_IER);

	return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
		"timb-uart", uart);
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 93 100.00% 2 100.00%
Total 93 100.00% 2 100.00%



static void timbuart_shutdown(struct uart_port *port)
{
	struct timbuart_port *uart =
		container_of(port, struct timbuart_port, port);
	dev_dbg(port->dev, "%s\n", __func__);
	free_irq(port->irq, uart);
	iowrite32(0, port->membase + TIMBUART_IER);

	timbuart_flush_buffer(port);
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 57 91.94% 2 66.67%
Peter Hurley 5 8.06% 1 33.33%
Total 62 100.00% 3 100.00%



static int get_bindex(int baud)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(baudrates); i++)
		if (baud <= baudrates[i])
			return i;

	return -1;
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 43 97.73% 1 50.00%
Alan Cox 1 2.27% 1 50.00%
Total 44 100.00% 2 100.00%



static void timbuart_set_termios(struct uart_port *port,
	struct ktermios *termios,
	struct ktermios *old)
{
	unsigned int baud;
	short bindex;
	unsigned long flags;

	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
	bindex = get_bindex(baud);
	dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);

	if (bindex < 0)
		bindex = 0;
	baud = baudrates[bindex];

	/* The serial layer calls into this once with old = NULL when setting
           up initially */
	if (old)
		tty_termios_copy_hw(termios, old);
	tty_termios_encode_baud_rate(termios, baud, baud);

	spin_lock_irqsave(&port->lock, flags);
	iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
	uart_update_timeout(port, termios->c_cflag, baud);
	spin_unlock_irqrestore(&port->lock, flags);
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 125 81.17% 1 50.00%
Alan Cox 29 18.83% 1 50.00%
Total 154 100.00% 2 100.00%



static const char *timbuart_type(struct uart_port *port)
{
	return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 24 100.00% 1 100.00%
Total 24 100.00% 1 100.00%

/* We do not request/release mappings of the registers here,
 * currently it's done in the proble function.
 */


static void timbuart_release_port(struct uart_port *port)
{
	struct platform_device *pdev = to_platform_device(port->dev);
	int size =
		resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));

	if (port->flags & UPF_IOREMAP) {
		iounmap(port->membase);
		port->membase = NULL;
	}

	release_mem_region(port->mapbase, size);
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 70 100.00% 1 100.00%
Total 70 100.00% 1 100.00%



static int timbuart_request_port(struct uart_port *port)
{
	struct platform_device *pdev = to_platform_device(port->dev);
	int size =
		resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));

	if (!request_mem_region(port->mapbase, size, "timb-uart"))
		return -EBUSY;

	if (port->flags & UPF_IOREMAP) {
		port->membase = ioremap(port->mapbase, size);
		if (port->membase == NULL) {
			release_mem_region(port->mapbase, size);
			return -ENOMEM;
		}
	}

	return 0;
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 105 100.00% 1 100.00%
Total 105 100.00% 1 100.00%



static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
{
	struct timbuart_port *uart = (struct timbuart_port *)devid;

	if (ioread8(uart->port.membase + TIMBUART_IPR)) {
		uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER);

		/* disable interrupts, the tasklet enables them again */
		iowrite32(0, uart->port.membase + TIMBUART_IER);

		/* fire off bottom half */
		tasklet_schedule(&uart->tasklet);

		return IRQ_HANDLED;
	} else
		return IRQ_NONE;
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 85 100.00% 2 100.00%
Total 85 100.00% 2 100.00%

/*
 * Configure/autoconfigure the port.
 */


static void timbuart_config_port(struct uart_port *port, int flags)
{
	if (flags & UART_CONFIG_TYPE) {
		port->type = PORT_TIMBUART;
		timbuart_request_port(port);
	}
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 33 100.00% 1 100.00%
Total 33 100.00% 1 100.00%



static int timbuart_verify_port(struct uart_port *port,
	struct serial_struct *ser)
{
	/* we don't want the core code to modify any port params */
	return -EINVAL;
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 21 100.00% 1 100.00%
Total 21 100.00% 1 100.00%


static const struct uart_ops timbuart_ops = {
	.tx_empty = timbuart_tx_empty,
	.set_mctrl = timbuart_set_mctrl,
	.get_mctrl = timbuart_get_mctrl,
	.stop_tx = timbuart_stop_tx,
	.start_tx = timbuart_start_tx,
	.flush_buffer = timbuart_flush_buffer,
	.stop_rx = timbuart_stop_rx,
	.break_ctl = timbuart_break_ctl,
	.startup = timbuart_startup,
	.shutdown = timbuart_shutdown,
	.set_termios = timbuart_set_termios,
	.type = timbuart_type,
	.release_port = timbuart_release_port,
	.request_port = timbuart_request_port,
	.config_port = timbuart_config_port,
	.verify_port = timbuart_verify_port
};


static struct uart_driver timbuart_driver = {
	.owner = THIS_MODULE,
	.driver_name = "timberdale_uart",
	.dev_name = "ttyTU",
	.major = TIMBUART_MAJOR,
	.minor = TIMBUART_MINOR,
	.nr = 1
};



static int timbuart_probe(struct platform_device *dev)
{
	int err, irq;
	struct timbuart_port *uart;
	struct resource *iomem;

	dev_dbg(&dev->dev, "%s\n", __func__);

	uart = kzalloc(sizeof(*uart), GFP_KERNEL);
	if (!uart) {
		err = -EINVAL;
		goto err_mem;
	}

	uart->usedma = 0;

	uart->port.uartclk = 3250000 * 16;
	uart->port.fifosize  = TIMBUART_FIFO_SIZE;
	uart->port.regshift  = 2;
	uart->port.iotype  = UPIO_MEM;
	uart->port.ops = &timbuart_ops;
	uart->port.irq = 0;
	uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
	uart->port.line  = 0;
	uart->port.dev	= &dev->dev;

	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
	if (!iomem) {
		err = -ENOMEM;
		goto err_register;
	}
	uart->port.mapbase = iomem->start;
	uart->port.membase = NULL;

	irq = platform_get_irq(dev, 0);
	if (irq < 0) {
		err = -EINVAL;
		goto err_register;
	}
	uart->port.irq = irq;

	tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart);

	err = uart_register_driver(&timbuart_driver);
	if (err)
		goto err_register;

	err = uart_add_one_port(&timbuart_driver, &uart->port);
	if (err)
		goto err_add_port;

	platform_set_drvdata(dev, uart);

	return 0;

err_add_port:
	uart_unregister_driver(&timbuart_driver);
err_register:
	kfree(uart);
err_mem:
	printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
		err);

	return err;
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 308 96.86% 1 50.00%
Roel Kluin 10 3.14% 1 50.00%
Total 318 100.00% 2 100.00%



static int timbuart_remove(struct platform_device *dev)
{
	struct timbuart_port *uart = platform_get_drvdata(dev);

	tasklet_kill(&uart->tasklet);
	uart_remove_one_port(&timbuart_driver, &uart->port);
	uart_unregister_driver(&timbuart_driver);
	kfree(uart);

	return 0;
}

Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 54 100.00% 1 100.00%
Total 54 100.00% 1 100.00%


static struct platform_driver timbuart_platform_driver = {
	.driver = {
		.name	= "timb-uart",
        },
	.probe		= timbuart_probe,
	.remove		= timbuart_remove,
};


module_platform_driver(timbuart_platform_driver);

MODULE_DESCRIPTION("Timberdale UART driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:timb-uart");

Overall Contributors
Person Tokens Prop Commits CommitProp
Richard Röjfors 2329 96.92% 3 17.65%
Alan Cox 36 1.50% 3 17.65%
Roel Kluin 11 0.46% 2 11.76%
Jiri Slaby 11 0.46% 3 17.65%
Peter Hurley 5 0.21% 1 5.88%
Paul Gortmaker 3 0.12% 1 5.88%
Tejun Heo 3 0.12% 1 5.88%
Jingoo Han 2 0.08% 1 5.88%
Axel Lin 2 0.08% 1 5.88%
Julia Lawall 1 0.04% 1 5.88%
Total 2403 100.00% 17 100.00%
Directory: drivers/tty/serial

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.
Person	Tokens	Prop	Commits	CommitProp
Richard Röjfors	38	100.00%	2	100.00%
Total	38	100.00%	2	100.00%
cregit-Linux how code gets into the kernel

Release 4.11 drivers/tty/serial/timbuart.c

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Overall Contributors
