cregit-Linux how code gets into the kernel

Release 4.11 drivers/usb/chipidea/ulpi.c

/*
 * Copyright (c) 2016 Linaro Ltd.
 *
 * This software is licensed under the terms of the GNU General Public
 * License version 2, as published by the Free Software Foundation, and
 * may be copied, distributed, and modified under those terms.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/device.h>
#include <linux/usb/chipidea.h>
#include <linux/ulpi/interface.h>

#include "ci.h"


#define ULPI_WAKEUP		BIT(31)

#define ULPI_RUN		BIT(30)

#define ULPI_WRITE		BIT(29)

#define ULPI_SYNC_STATE		BIT(27)

#define ULPI_ADDR(n)		((n) << 16)

#define ULPI_DATA(n)		(n)


static int ci_ulpi_wait(struct ci_hdrc *ci, u32 mask) { unsigned long usec = 10000; while (usec--) { if (!hw_read(ci, OP_ULPI_VIEWPORT, mask)) return 0; udelay(1); } return -ETIMEDOUT; }

Contributors

PersonTokensPropCommitsCommitProp
Stephen Boyd51100.00%1100.00%
Total51100.00%1100.00%


static int ci_ulpi_read(struct device *dev, u8 addr) { struct ci_hdrc *ci = dev_get_drvdata(dev); int ret; hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_WRITE | ULPI_WAKEUP); ret = ci_ulpi_wait(ci, ULPI_WAKEUP); if (ret) return ret; hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_RUN | ULPI_ADDR(addr)); ret = ci_ulpi_wait(ci, ULPI_RUN); if (ret) return ret; return hw_read(ci, OP_ULPI_VIEWPORT, GENMASK(15, 8)) >> 8; }

Contributors

PersonTokensPropCommitsCommitProp
Stephen Boyd105100.00%1100.00%
Total105100.00%1100.00%


static int ci_ulpi_write(struct device *dev, u8 addr, u8 val) { struct ci_hdrc *ci = dev_get_drvdata(dev); int ret; hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_WRITE | ULPI_WAKEUP); ret = ci_ulpi_wait(ci, ULPI_WAKEUP); if (ret) return ret; hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_RUN | ULPI_WRITE | ULPI_ADDR(addr) | val); return ci_ulpi_wait(ci, ULPI_RUN); }

Contributors

PersonTokensPropCommitsCommitProp
Stephen Boyd87100.00%1100.00%
Total87100.00%1100.00%


int ci_ulpi_init(struct ci_hdrc *ci) { if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI) return 0; /* * Set PORTSC correctly so we can read/write ULPI registers for * identification purposes */ hw_phymode_configure(ci); ci->ulpi_ops.read = ci_ulpi_read; ci->ulpi_ops.write = ci_ulpi_write; ci->ulpi = ulpi_register_interface(ci->dev, &ci->ulpi_ops); if (IS_ERR(ci->ulpi)) dev_err(ci->dev, "failed to register ULPI interface"); return PTR_ERR_OR_ZERO(ci->ulpi); }

Contributors

PersonTokensPropCommitsCommitProp
Stephen Boyd87100.00%1100.00%
Total87100.00%1100.00%


void ci_ulpi_exit(struct ci_hdrc *ci) { if (ci->ulpi) { ulpi_unregister_interface(ci->ulpi); ci->ulpi = NULL; } }

Contributors

PersonTokensPropCommitsCommitProp
Stephen Boyd31100.00%1100.00%
Total31100.00%1100.00%


int ci_ulpi_resume(struct ci_hdrc *ci) { int cnt = 100000; while (cnt-- > 0) { if (hw_read(ci, OP_ULPI_VIEWPORT, ULPI_SYNC_STATE)) return 0; udelay(1); } return -ETIMEDOUT; }

Contributors

PersonTokensPropCommitsCommitProp
Stephen Boyd47100.00%1100.00%
Total47100.00%1100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
Stephen Boyd451100.00%1100.00%
Total451100.00%1100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.