Release 4.11 drivers/usb/core/usb-acpi.c
/*
* USB-ACPI glue code
*
* Copyright 2012 Red Hat <mjg@redhat.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
*/
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/pci.h>
#include <linux/usb/hcd.h>
#include "hub.h"
/**
* usb_acpi_power_manageable - check whether usb port has
* acpi power resource.
* @hdev: USB device belonging to the usb hub
* @index: port index based zero
*
* Return true if the port has acpi power resource and false if no.
*/
bool usb_acpi_power_manageable(struct usb_device *hdev, int index)
{
acpi_handle port_handle;
int port1 = index + 1;
port_handle = usb_get_hub_port_acpi_handle(hdev,
port1);
if (port_handle)
return acpi_bus_power_manageable(port_handle);
else
return false;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Lan Tianyu | 46 | 100.00% | 1 | 100.00% |
| Total | 46 | 100.00% | 1 | 100.00% |
EXPORT_SYMBOL_GPL(usb_acpi_power_manageable);
/**
* usb_acpi_set_power_state - control usb port's power via acpi power
* resource
* @hdev: USB device belonging to the usb hub
* @index: port index based zero
* @enable: power state expected to be set
*
* Notice to use usb_acpi_power_manageable() to check whether the usb port
* has acpi power resource before invoking this function.
*
* Returns 0 on success, else negative errno.
*/
int usb_acpi_set_power_state(struct usb_device *hdev, int index, bool enable)
{
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
struct usb_port *port_dev;
acpi_handle port_handle;
unsigned char state;
int port1 = index + 1;
int error = -EINVAL;
if (!hub)
return -ENODEV;
port_dev = hub->ports[port1 - 1];
port_handle = (acpi_handle) usb_get_hub_port_acpi_handle(hdev, port1);
if (!port_handle)
return error;
if (enable)
state = ACPI_STATE_D0;
else
state = ACPI_STATE_D3_COLD;
error = acpi_bus_set_power(port_handle, state);
if (!error)
dev_dbg(&port_dev->dev, "acpi: power was set to %d\n", enable);
else
dev_dbg(&port_dev->dev, "acpi: power failed to be set\n");
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Lan Tianyu | 105 | 72.92% | 1 | 50.00% |
| Dan J Williams | 39 | 27.08% | 1 | 50.00% |
| Total | 144 | 100.00% | 2 | 100.00% |
EXPORT_SYMBOL_GPL(usb_acpi_set_power_state);
static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle,
struct acpi_pld_info *pld)
{
enum usb_port_connect_type connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *upc;
acpi_status status;
/*
* According to ACPI Spec 9.13. PLD indicates whether usb port is
* user visible and _UPC indicates whether it is connectable. If
* the port was visible and connectable, it could be freely connected
* and disconnected with USB devices. If no visible and connectable,
* a usb device is directly hard-wired to the port. If no visible and
* no connectable, the port would be not used.
*/
status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer);
upc = buffer.pointer;
if (!upc || (upc->type != ACPI_TYPE_PACKAGE)
|| upc->package.count != 4) {
goto out;
}
if (upc->package.elements[0].integer.value)
if (pld->user_visible)
connect_type = USB_PORT_CONNECT_TYPE_HOT_PLUG;
else
connect_type = USB_PORT_CONNECT_TYPE_HARD_WIRED;
else if (!pld->user_visible)
connect_type = USB_PORT_NOT_USED;
out:
kfree(upc);
return connect_type;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Matthew Garrett | 79 | 57.25% | 1 | 20.00% |
| Lan Tianyu | 30 | 21.74% | 1 | 20.00% |
| Dan J Williams | 28 | 20.29% | 2 | 40.00% |
| Rahul Bedarkar | 1 | 0.72% | 1 | 20.00% |
| Total | 138 | 100.00% | 5 | 100.00% |
/*
* Private to usb-acpi, all the core needs to know is that
* port_dev->location is non-zero when it has been set by the firmware.
*/
#define USB_ACPI_LOCATION_VALID (1 << 31)
static struct acpi_device *usb_acpi_find_companion(struct device *dev)
{
struct usb_device *udev;
struct acpi_device *adev;
acpi_handle *parent_handle;
/*
* In the ACPI DSDT table, only usb root hub and usb ports are
* acpi device nodes. The hierarchy like following.
* Device (EHC1)
* Device (HUBN)
* Device (PR01)
* Device (PR11)
* Device (PR12)
* Device (PR13)
* ...
* So all binding process is divided into two parts. binding
* root hub and usb ports.
*/
if (is_usb_device(dev)) {
udev = to_usb_device(dev);
if (udev->parent)
return NULL;
/* root hub is only child (_ADR=0) under its parent, the HC */
adev = ACPI_COMPANION(dev->parent);
return acpi_find_child_device(adev, 0, false);
} else if (is_usb_port(dev)) {
struct usb_port *port_dev = to_usb_port(dev);
int port1 = port_dev->portnum;
struct acpi_pld_info *pld;
acpi_handle *handle;
acpi_status status;
/* Get the struct usb_device point of port's hub */
udev = to_usb_device(dev->parent->parent);
/*
* The root hub ports' parent is the root hub. The non-root-hub
* ports' parent is the parent hub port which the hub is
* connected to.
*/
if (!udev->parent) {
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
int raw;
raw = usb_hcd_find_raw_port_number(hcd, port1);
adev = acpi_find_child_device(ACPI_COMPANION(&udev->dev),
raw, false);
if (!adev)
return NULL;
} else {
parent_handle =
usb_get_hub_port_acpi_handle(udev->parent,
udev->portnum);
if (!parent_handle)
return NULL;
acpi_bus_get_device(parent_handle, &adev);
adev = acpi_find_child_device(adev, port1, false);
if (!adev)
return NULL;
}
handle = adev->handle;
status = acpi_get_physical_device_location(handle, &pld);
if (ACPI_FAILURE(status) || !pld)
return adev;
port_dev->location = USB_ACPI_LOCATION_VALID
| pld->group_token << 8 | pld->group_position;
port_dev->connect_type = usb_acpi_get_connect_type(handle, pld);
ACPI_FREE(pld);
return adev;
}
return NULL;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dan J Williams | 98 | 32.56% | 3 | 33.33% |
| Lan Tianyu | 94 | 31.23% | 3 | 33.33% |
| Matthew Garrett | 70 | 23.26% | 2 | 22.22% |
| Rafael J. Wysocki | 39 | 12.96% | 1 | 11.11% |
| Total | 301 | 100.00% | 9 | 100.00% |
static bool usb_acpi_bus_match(struct device *dev)
{
return is_usb_device(dev) || is_usb_port(dev);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Rafael J. Wysocki | 22 | 100.00% | 1 | 100.00% |
| Total | 22 | 100.00% | 1 | 100.00% |
static struct acpi_bus_type usb_acpi_bus = {
.name = "USB",
.match = usb_acpi_bus_match,
.find_companion = usb_acpi_find_companion,
};
int usb_acpi_register(void)
{
return register_acpi_bus_type(&usb_acpi_bus);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Matthew Garrett | 14 | 100.00% | 1 | 100.00% |
| Total | 14 | 100.00% | 1 | 100.00% |
void usb_acpi_unregister(void)
{
unregister_acpi_bus_type(&usb_acpi_bus);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Matthew Garrett | 13 | 100.00% | 1 | 100.00% |
| Total | 13 | 100.00% | 1 | 100.00% |
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Lan Tianyu | 290 | 38.93% | 4 | 33.33% |
| Matthew Garrett | 216 | 28.99% | 2 | 16.67% |
| Dan J Williams | 171 | 22.95% | 3 | 25.00% |
| Rafael J. Wysocki | 67 | 8.99% | 2 | 16.67% |
| Rahul Bedarkar | 1 | 0.13% | 1 | 8.33% |
| Total | 745 | 100.00% | 12 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.