Release 4.11 drivers/usb/host/sl811.h
/*
* SL811HS register declarations and HCD data structures
*
* Copyright (C) 2004 Psion Teklogix
* Copyright (C) 2004 David Brownell
* Copyright (C) 2001 Cypress Semiconductor Inc.
*/
/*
* SL811HS has transfer registers, and control registers. In host/master
* mode one set of registers is used; in peripheral/slave mode, another.
* - SL11H only has some "A" transfer registers from 0x00-0x04
* - SL811HS also has "B" registers from 0x08-0x0c
* - SL811S (or HS in slave mode) has four A+B sets, at 00, 10, 20, 30
*/
#define SL811_EP_A(base) ((base) + 0)
#define SL811_EP_B(base) ((base) + 8)
#define SL811_HOST_BUF 0x00
#define SL811_PERIPH_EP0 0x00
#define SL811_PERIPH_EP1 0x10
#define SL811_PERIPH_EP2 0x20
#define SL811_PERIPH_EP3 0x30
/* TRANSFER REGISTERS: host and peripheral sides are similar
* except for the control models (master vs slave).
*/
#define SL11H_HOSTCTLREG 0
# define SL11H_HCTLMASK_ARM 0x01
# define SL11H_HCTLMASK_ENABLE 0x02
# define SL11H_HCTLMASK_IN 0x00
# define SL11H_HCTLMASK_OUT 0x04
# define SL11H_HCTLMASK_ISOCH 0x10
# define SL11H_HCTLMASK_AFTERSOF 0x20
# define SL11H_HCTLMASK_TOGGLE 0x40
# define SL11H_HCTLMASK_PREAMBLE 0x80
#define SL11H_BUFADDRREG 1
#define SL11H_BUFLNTHREG 2
#define SL11H_PKTSTATREG 3
/* read */
# define SL11H_STATMASK_ACK 0x01
# define SL11H_STATMASK_ERROR 0x02
# define SL11H_STATMASK_TMOUT 0x04
# define SL11H_STATMASK_SEQ 0x08
# define SL11H_STATMASK_SETUP 0x10
# define SL11H_STATMASK_OVF 0x20
# define SL11H_STATMASK_NAK 0x40
# define SL11H_STATMASK_STALL 0x80
#define SL11H_PIDEPREG 3
/* write */
# define SL_SETUP 0xd0
# define SL_IN 0x90
# define SL_OUT 0x10
# define SL_SOF 0x50
# define SL_PREAMBLE 0xc0
# define SL_NAK 0xa0
# define SL_STALL 0xe0
# define SL_DATA0 0x30
# define SL_DATA1 0xb0
#define SL11H_XFERCNTREG 4
/* read */
#define SL11H_DEVADDRREG 4
/* write */
/* CONTROL REGISTERS: host and peripheral are very different.
*/
#define SL11H_CTLREG1 5
# define SL11H_CTL1MASK_SOF_ENA 0x01
# define SL11H_CTL1MASK_FORCE 0x18
# define SL11H_CTL1MASK_NORMAL 0x00
# define SL11H_CTL1MASK_SE0 0x08
/* reset */
# define SL11H_CTL1MASK_J 0x10
# define SL11H_CTL1MASK_K 0x18
/* resume */
# define SL11H_CTL1MASK_LSPD 0x20
# define SL11H_CTL1MASK_SUSPEND 0x40
#define SL11H_IRQ_ENABLE 6
# define SL11H_INTMASK_DONE_A 0x01
# define SL11H_INTMASK_DONE_B 0x02
# define SL11H_INTMASK_SOFINTR 0x10
# define SL11H_INTMASK_INSRMV 0x20
/* to/from SE0 */
# define SL11H_INTMASK_RD 0x40
# define SL11H_INTMASK_DP 0x80
/* only in INTSTATREG */
#define SL11S_ADDRESS 7
/* 0x08-0x0c are for the B buffer (not in SL11) */
#define SL11H_IRQ_STATUS 0x0D
/* write to ack */
#define SL11H_HWREVREG 0x0E
/* read */
# define SL11H_HWRMASK_HWREV 0xF0
#define SL11H_SOFLOWREG 0x0E
/* write */
#define SL11H_SOFTMRREG 0x0F
/* read */
/* a write to this register enables SL811HS features.
* HOST flag presumably overrides the chip input signal?
*/
#define SL811HS_CTLREG2 0x0F
# define SL811HS_CTL2MASK_SOF_MASK 0x3F
# define SL811HS_CTL2MASK_DSWAP 0x40
# define SL811HS_CTL2MASK_HOST 0x80
#define SL811HS_CTL2_INIT (SL811HS_CTL2MASK_HOST | 0x2e)
/* DATA BUFFERS: registers from 0x10..0xff are for data buffers;
* that's 240 bytes, which we'll split evenly between A and B sides.
* Only ISO can use more than 64 bytes per packet.
* (The SL11S has 0x40..0xff for buffers.)
*/
#define H_MAXPACKET 120
/* bytes in A or B fifos */
#define SL11H_DATA_START 0x10
#define SL811HS_PACKET_BUF(is_a) ((is_a) \
? SL11H_DATA_START \
: (SL11H_DATA_START + H_MAXPACKET))
/*-------------------------------------------------------------------------*/
#define LOG2_PERIODIC_SIZE 5
/* arbitrary; this matches OHCI */
#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE)
struct sl811 {
spinlock_t lock;
void __iomem *addr_reg;
void __iomem *data_reg;
struct sl811_platform_data *board;
struct dentry *debug_file;
unsigned long stat_insrmv;
unsigned long stat_wake;
unsigned long stat_sof;
unsigned long stat_a;
unsigned long stat_b;
unsigned long stat_lost;
unsigned long stat_overrun;
/* sw model */
struct timer_list timer;
struct sl811h_ep *next_periodic;
struct sl811h_ep *next_async;
struct sl811h_ep *active_a;
unsigned long jiffies_a;
struct sl811h_ep *active_b;
unsigned long jiffies_b;
u32 port1;
u8 ctrl1, ctrl2, irq_enable;
u16 frame;
/* async schedule: control, bulk */
struct list_head async;
/* periodic schedule: interrupt, iso */
u16 load[PERIODIC_SIZE];
struct sl811h_ep *periodic[PERIODIC_SIZE];
unsigned periodic_count;
};
static inline struct sl811 *hcd_to_sl811(struct usb_hcd *hcd)
{
return (struct sl811 *) (hcd->hcd_priv);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| David Brownell | 14 | 53.85% | 1 | 50.00% |
| Alan Stern | 12 | 46.15% | 1 | 50.00% |
| Total | 26 | 100.00% | 2 | 100.00% |
static inline struct usb_hcd *sl811_to_hcd(struct sl811 *sl811)
{
return container_of((void *) sl811, struct usb_hcd, hcd_priv);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alan Stern | 21 | 72.41% | 1 | 50.00% |
| David Brownell | 8 | 27.59% | 1 | 50.00% |
| Total | 29 | 100.00% | 2 | 100.00% |
struct sl811h_ep {
struct usb_host_endpoint *hep;
struct usb_device *udev;
u8 defctrl;
u8 maxpacket;
u8 epnum;
u8 nextpid;
u16 error_count;
u16 nak_count;
u16 length; /* of current packet */
/* periodic schedule */
u16 period;
u16 branch;
u16 load;
struct sl811h_ep *next;
/* async schedule */
struct list_head schedule;
};
/*-------------------------------------------------------------------------*/
/* These register utilities should work for the SL811S register API too
* NOTE: caller must hold sl811->lock.
*/
static inline u8 sl811_read(struct sl811 *sl811, int reg)
{
writeb(reg, sl811->addr_reg);
return readb(sl811->data_reg);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| David Brownell | 32 | 100.00% | 1 | 100.00% |
| Total | 32 | 100.00% | 1 | 100.00% |
static inline void sl811_write(struct sl811 *sl811, int reg, u8 val)
{
writeb(reg, sl811->addr_reg);
writeb(val, sl811->data_reg);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| David Brownell | 36 | 100.00% | 1 | 100.00% |
| Total | 36 | 100.00% | 1 | 100.00% |
static inline void
sl811_write_buf(struct sl811 *sl811, int addr, const void *buf, size_t count)
{
const u8 *data;
void __iomem *data_reg;
if (!count)
return;
writeb(addr, sl811->addr_reg);
data = buf;
data_reg = sl811->data_reg;
do {
writeb(*data++, data_reg);
} while (--count);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| David Brownell | 76 | 100.00% | 1 | 100.00% |
| Total | 76 | 100.00% | 1 | 100.00% |
static inline void
sl811_read_buf(struct sl811 *sl811, int addr, void *buf, size_t count)
{
u8 *data;
void __iomem *data_reg;
if (!count)
return;
writeb(addr, sl811->addr_reg);
data = buf;
data_reg = sl811->data_reg;
do {
*data++ = readb(data_reg);
} while (--count);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| David Brownell | 74 | 100.00% | 1 | 100.00% |
| Total | 74 | 100.00% | 1 | 100.00% |
/*-------------------------------------------------------------------------*/
#ifdef PACKET_TRACE
# define PACKET pr_debug("sl811: "stuff)
#else
# define PACKET(stuff...) do{}while(0)
#endif
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| David Brownell | 756 | 95.45% | 2 | 40.00% |
| Alan Stern | 33 | 4.17% | 1 | 20.00% |
| Greg Kroah-Hartman | 3 | 0.38% | 2 | 40.00% |
| Total | 792 | 100.00% | 5 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.