cregit-Linux how code gets into the kernel

Release 4.11 drivers/usb/misc/isight_firmware.c

Directory: drivers/usb/misc
/*
 * Driver for loading USB isight firmware
 *
 * Copyright (C) 2008 Matthew Garrett <mjg@redhat.com>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation, version 2.
 *
 * The USB isight cameras in recent Apples are roughly compatible with the USB
 * video class specification, and can be driven by uvcvideo. However, they
 * need firmware to be loaded beforehand. After firmware loading, the device
 * detaches from the USB bus and reattaches with a new device ID. It can then
 * be claimed by the uvc driver.
 *
 * The firmware is non-free and must be extracted by the user. Tools to do this
 * are available at http://bersace03.free.fr/ift/
 *
 * The isight firmware loading was reverse engineered by Johannes Berg
 * <johannes@sipsolutions.de>, and this driver is based on code by Ronald
 * Bultje <rbultje@ronald.bitfreak.net>
 */

#include <linux/usb.h>
#include <linux/firmware.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/slab.h>


static const struct usb_device_id id_table[] = {
	{USB_DEVICE(0x05ac, 0x8300)},
	{},
};

MODULE_DEVICE_TABLE(usb, id_table);


static int isight_firmware_load(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); int llen, len, req, ret = 0; const struct firmware *firmware; unsigned char *buf = kmalloc(50, GFP_KERNEL); unsigned char data[4]; const u8 *ptr; if (!buf) return -ENOMEM; if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) { printk(KERN_ERR "Unable to load isight firmware\n"); ret = -ENODEV; goto out; } ptr = firmware->data; buf[0] = 0x01; if (usb_control_msg (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1, 300) != 1) { printk(KERN_ERR "Failed to initialise isight firmware loader\n"); ret = -ENODEV; goto out; } while (ptr+4 <= firmware->data+firmware->size) { memcpy(data, ptr, 4); len = (data[0] << 8 | data[1]); req = (data[2] << 8 | data[3]); ptr += 4; if (len == 0x8001) break; /* success */ else if (len == 0) continue; for (; len > 0; req += 50) { llen = min(len, 50); len -= llen; if (ptr+llen > firmware->data+firmware->size) { printk(KERN_ERR "Malformed isight firmware"); ret = -ENODEV; goto out; } memcpy(buf, ptr, llen); ptr += llen; if (usb_control_msg (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0, buf, llen, 300) != llen) { printk(KERN_ERR "Failed to load isight firmware\n"); ret = -ENODEV; goto out; } } } buf[0] = 0x00; if (usb_control_msg (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1, 300) != 1) { printk(KERN_ERR "isight firmware loading completion failed\n"); ret = -ENODEV; } out: kfree(buf); release_firmware(firmware); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Matthew Garrett40394.60%240.00%
Greg Kroah-Hartman173.99%240.00%
Parag Warudkar61.41%120.00%
Total426100.00%5100.00%

MODULE_FIRMWARE("isight.fw");
static void isight_firmware_disconnect(struct usb_interface *intf) { }

Contributors

PersonTokensPropCommitsCommitProp
Matthew Garrett10100.00%1100.00%
Total10100.00%1100.00%

static struct usb_driver isight_firmware_driver = { .name = "isight_firmware", .probe = isight_firmware_load, .disconnect = isight_firmware_disconnect, .id_table = id_table, }; module_usb_driver(isight_firmware_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");

Overall Contributors

PersonTokensPropCommitsCommitProp
Matthew Garrett49293.54%222.22%
Greg Kroah-Hartman193.61%333.33%
Parag Warudkar61.14%111.11%
Ben Hutchings50.95%111.11%
Tejun Heo30.57%111.11%
Márton Németh10.19%111.11%
Total526100.00%9100.00%
Directory: drivers/usb/misc
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.