cregit-Linux how code gets into the kernel

Release 4.11 drivers/usb/musb/blackfin.h

Directory: drivers/usb/musb
/*
 * Copyright (C) 2007 by Analog Devices, Inc.
 *
 * The Inventra Controller Driver for Linux is free software; you
 * can redistribute it and/or modify it under the terms of the GNU
 * General Public License version 2 as published by the Free Software
 * Foundation.
 */

#ifndef __MUSB_BLACKFIN_H__

#define __MUSB_BLACKFIN_H__

/*
 * Blackfin specific definitions
 */

/* Anomalies notes:
 *
 *  05000450 - USB DMA Mode 1 Short Packet Data Corruption:
 *             MUSB driver is designed to transfer buffer of N * maxpacket size
 *             in DMA mode 1 and leave the rest of the data to the next
 *             transfer in DMA mode 0, so we never transmit a short packet in
 *             DMA mode 1.
 *
 *  05000463 - This anomaly doesn't affect this driver since it
 *             never uses L1 or L2 memory as data destination.
 *
 *  05000464 - This anomaly doesn't affect this driver since it
 *             never uses L1 or L2 memory as data source.
 *
 *  05000465 - The anomaly can be seen when SCLK is over 100 MHz, and there is
 *             no way to workaround for bulk endpoints.  Since the wMaxPackSize
 *             of bulk is less than or equal to 512, while the fifo size of
 *             endpoint 5, 6, 7 is 1024, the double buffer mode is enabled
 *             automatically when these endpoints are used for bulk OUT.
 *
 *  05000466 - This anomaly doesn't affect this driver since it never mixes
 *             concurrent DMA and core accesses to the TX endpoint FIFOs.
 *
 *  05000467 - The workaround for this anomaly will introduce another
 *             anomaly - 05000465.
 */

/* The Mentor USB DMA engine on BF52x (silicon v0.0 and v0.1) seems to be
 * unstable in host mode.  This may be caused by Anomaly 05000380.  After
 * digging out the root cause, we will change this number accordingly.
 * So, need to either use silicon v0.2+ or disable DMA mode in MUSB.
 */
#if ANOMALY_05000380 && defined(CONFIG_BF52x) && \
	!defined(CONFIG_MUSB_PIO_ONLY)
# error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1"
#endif


#undef DUMP_FIFO_DATA
#ifdef DUMP_FIFO_DATA

static void dump_fifo_data(u8 *buf, u16 len) { u8 *tmp = buf; int i; for (i = 0; i < len; i++) { if (!(i % 16) && i) pr_debug("\n"); pr_debug("%02x ", *tmp++); } pr_debug("\n"); }

Contributors

PersonTokensPropCommitsCommitProp
Bryan Wu67100.00%1100.00%
Total67100.00%1100.00%

#else #define dump_fifo_data(buf, len) do {} while (0) #endif #define USB_DMA_BASE USB_DMA_INTERRUPT #define USB_DMAx_CTRL 0x04 #define USB_DMAx_ADDR_LOW 0x08 #define USB_DMAx_ADDR_HIGH 0x0C #define USB_DMAx_COUNT_LOW 0x10 #define USB_DMAx_COUNT_HIGH 0x14 #define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg) /* Almost 1 second */ #define TIMER_DELAY (1 * HZ) static struct timer_list musb_conn_timer; #endif /* __MUSB_BLACKFIN_H__ */

Overall Contributors

PersonTokensPropCommitsCommitProp
Bryan Wu14086.42%133.33%
Sonic Zhang2213.58%266.67%
Total162100.00%3100.00%
Directory: drivers/usb/musb
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.