cregit-Linux how code gets into the kernel

Release 4.11 drivers/usb/musb/da8xx.c

Directory: drivers/usb/musb
/*
 * Texas Instruments DA8xx/OMAP-L1x "glue layer"
 *
 * Copyright (c) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
 *
 * Based on the DaVinci "glue layer" code.
 * Copyright (C) 2005-2006 by Texas Instruments
 *
 * DT support
 * Copyright (c) 2016 Petr Kulhavy <petr@barix.com>
 *
 * This file is part of the Inventra Controller Driver for Linux.
 *
 * The Inventra Controller Driver for Linux is free software; you
 * can redistribute it and/or modify it under the terms of the GNU
 * General Public License version 2 as published by the Free Software
 * Foundation.
 *
 * The Inventra Controller Driver for Linux is distributed in
 * the hope that it will be useful, but WITHOUT ANY WARRANTY;
 * without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
 * License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with The Inventra Controller Driver for Linux ; if not,
 * write to the Free Software Foundation, Inc., 59 Temple Place,
 * Suite 330, Boston, MA  02111-1307  USA
 *
 */

#include <linux/module.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/usb_phy_generic.h>

#include "musb_core.h"

/*
 * DA8XX specific definitions
 */

/* USB 2.0 OTG module registers */

#define DA8XX_USB_REVISION_REG	0x00

#define DA8XX_USB_CTRL_REG	0x04

#define DA8XX_USB_STAT_REG	0x08

#define DA8XX_USB_EMULATION_REG 0x0c

#define DA8XX_USB_MODE_REG	0x10	
/* Transparent, CDC, [Generic] RNDIS */

#define DA8XX_USB_AUTOREQ_REG	0x14

#define DA8XX_USB_SRP_FIX_TIME_REG 0x18

#define DA8XX_USB_TEARDOWN_REG	0x1c

#define DA8XX_USB_INTR_SRC_REG	0x20

#define DA8XX_USB_INTR_SRC_SET_REG 0x24

#define DA8XX_USB_INTR_SRC_CLEAR_REG 0x28

#define DA8XX_USB_INTR_MASK_REG 0x2c

#define DA8XX_USB_INTR_MASK_SET_REG 0x30

#define DA8XX_USB_INTR_MASK_CLEAR_REG 0x34

#define DA8XX_USB_INTR_SRC_MASKED_REG 0x38

#define DA8XX_USB_END_OF_INTR_REG 0x3c

#define DA8XX_USB_GENERIC_RNDIS_EP_SIZE_REG(n) (0x50 + (((n) - 1) << 2))

/* Control register bits */

#define DA8XX_SOFT_RESET_MASK	1


#define DA8XX_USB_TX_EP_MASK	0x1f		
/* EP0 + 4 Tx EPs */

#define DA8XX_USB_RX_EP_MASK	0x1e		
/* 4 Rx EPs */

/* USB interrupt register bits */

#define DA8XX_INTR_USB_SHIFT	16

#define DA8XX_INTR_USB_MASK	(0x1ff << DA8XX_INTR_USB_SHIFT) 
/* 8 Mentor */
					/* interrupts and DRVVBUS interrupt */

#define DA8XX_INTR_DRVVBUS	0x100

#define DA8XX_INTR_RX_SHIFT	8

#define DA8XX_INTR_RX_MASK	(DA8XX_USB_RX_EP_MASK << DA8XX_INTR_RX_SHIFT)

#define DA8XX_INTR_TX_SHIFT	0

#define DA8XX_INTR_TX_MASK	(DA8XX_USB_TX_EP_MASK << DA8XX_INTR_TX_SHIFT)


#define DA8XX_MENTOR_CORE_OFFSET 0x400


struct da8xx_glue {
	
struct device		*dev;
	
struct platform_device	*musb;
	
struct platform_device	*usb_phy;
	
struct clk		*clk;
	
struct phy		*phy;
};

/*
 * Because we don't set CTRL.UINT, it's "important" to:
 *      - not read/write INTRUSB/INTRUSBE (except during
 *        initial setup, as a workaround);
 *      - use INTSET/INTCLR instead.
 */

/**
 * da8xx_musb_enable - enable interrupts
 */



static void da8xx_musb_enable(struct musb *musb)
{
	void __iomem *reg_base = musb->ctrl_base;
	u32 mask;

	/* Workaround: setup IRQs through both register sets. */
	mask = ((musb->epmask & DA8XX_USB_TX_EP_MASK) << DA8XX_INTR_TX_SHIFT) |
	       ((musb->epmask & DA8XX_USB_RX_EP_MASK) << DA8XX_INTR_RX_SHIFT) |
	       DA8XX_INTR_USB_MASK;
	musb_writel(reg_base, DA8XX_USB_INTR_MASK_SET_REG, mask);

	/* Force the DRVVBUS IRQ so we can start polling for ID change. */
	musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG,
			DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT);
}


Contributors
PersonTokensPropCommitsCommitProp
Sergei Shtylyov7197.26%150.00%


Felipe Balbi22.74%150.00%


Total73100.00%2100.00%



/**
 * da8xx_musb_disable - disable HDRC and flush interrupts
 */



static void da8xx_musb_disable(struct musb *musb)
{
	void __iomem *reg_base = musb->ctrl_base;

	musb_writel(reg_base, DA8XX_USB_INTR_MASK_CLEAR_REG,
		    DA8XX_INTR_USB_MASK |
		    DA8XX_INTR_TX_MASK | DA8XX_INTR_RX_MASK);
	musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
}


Contributors
PersonTokensPropCommitsCommitProp
Sergei Shtylyov4095.24%150.00%


Felipe Balbi24.76%150.00%


Total42100.00%2100.00%




#define portstate(stmt)		stmt




static void da8xx_musb_set_vbus(struct musb *musb, int is_on)
{
	WARN_ON(is_on && is_peripheral_active(musb));
}


Contributors
PersonTokensPropCommitsCommitProp
Sergei Shtylyov2395.83%150.00%


Felipe Balbi14.17%150.00%


Total24100.00%2100.00%




#define	POLL_SECONDS	2


static struct timer_list otg_workaround;




static void otg_timer(unsigned long _musb)
{
	struct musb		*musb = (void *)_musb;
	void __iomem		*mregs = musb->mregs;
	u8			devctl;
	unsigned long		flags;

	/*
         * We poll because DaVinci's won't expose several OTG-critical
         * status change events (from the transceiver) otherwise.
         */
	devctl = musb_readb(mregs, MUSB_DEVCTL);
	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
		usb_otg_state_string(musb->xceiv->otg->state));

	spin_lock_irqsave(&musb->lock, flags);
	switch (musb->xceiv->otg->state) {
	case OTG_STATE_A_WAIT_BCON:
		devctl &= ~MUSB_DEVCTL_SESSION;
		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);

		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
		if (devctl & MUSB_DEVCTL_BDEVICE) {
			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
			MUSB_DEV_MODE(musb);
		} else {
			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
			MUSB_HST_MODE(musb);
		}
		break;
	case OTG_STATE_A_WAIT_VFALL:
		/*
                 * Wait till VBUS falls below SessionEnd (~0.2 V); the 1.3
                 * RTL seems to mis-handle session "start" otherwise (or in
                 * our case "recover"), in routine "VBUS was valid by the time
                 * VBUSERR got reported during enumeration" cases.
                 */
		if (devctl & MUSB_DEVCTL_VBUS) {
			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
			break;
		}
		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
		musb_writel(musb->ctrl_base, DA8XX_USB_INTR_SRC_SET_REG,
			    MUSB_INTR_VBUSERROR << DA8XX_INTR_USB_SHIFT);
		break;
	case OTG_STATE_B_IDLE:
		/*
                 * There's no ID-changed IRQ, so we have no good way to tell
                 * when to switch to the A-Default state machine (by setting
                 * the DEVCTL.Session bit).
                 *
                 * Workaround:  whenever we're in B_IDLE, try setting the
                 * session flag every few seconds.  If it works, ID was
                 * grounded and we're now in the A-Default state machine.
                 *
                 * NOTE: setting the session flag is _supposed_ to trigger
                 * SRP but clearly it doesn't.
                 */
		musb_writeb(mregs, MUSB_DEVCTL, devctl | MUSB_DEVCTL_SESSION);
		devctl = musb_readb(mregs, MUSB_DEVCTL);
		if (devctl & MUSB_DEVCTL_BDEVICE)
			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
		else
			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
		break;
	default:
		break;
	}
	spin_unlock_irqrestore(&musb->lock, flags);
}


Contributors
PersonTokensPropCommitsCommitProp
Sergei Shtylyov25792.45%120.00%


Antoine Ténart124.32%120.00%


Felipe Balbi51.80%240.00%


Anatolij Gustschin41.44%120.00%


Total278100.00%5100.00%






static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
{
	static unsigned long last_timer;

	if (timeout == 0)
		timeout = jiffies + msecs_to_jiffies(3);

	/* Never idle if active, or when VBUS timeout is not set as host */
	if (musb->is_active || (musb->a_wait_bcon == 0 &&
				musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) {
		dev_dbg(musb->controller, "%s active, deleting timer\n",
			usb_otg_state_string(musb->xceiv->otg->state));
		del_timer(&otg_workaround);
		last_timer = jiffies;
		return;
	}

	if (time_after(last_timer, timeout) && timer_pending(&otg_workaround)) {
		dev_dbg(musb->controller, "Longer idle timer already pending, ignoring...\n");
		return;
	}
	last_timer = timeout;

	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
		usb_otg_state_string(musb->xceiv->otg->state),
		jiffies_to_msecs(timeout - jiffies));
	mod_timer(&otg_workaround, timeout);
}


Contributors
PersonTokensPropCommitsCommitProp
Sergei Shtylyov12981.13%116.67%


Felipe Balbi1610.06%350.00%


Anatolij Gustschin85.03%116.67%


Antoine Ténart63.77%116.67%


Total159100.00%6100.00%






static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
{
	struct musb		*musb = hci;
	void __iomem		*reg_base = musb->ctrl_base;
	struct usb_otg		*otg = musb->xceiv->otg;
	unsigned long		flags;
	irqreturn_t		ret = IRQ_NONE;
	u32			status;

	spin_lock_irqsave(&musb->lock, flags);

	/*
         * NOTE: DA8XX shadows the Mentor IRQs.  Don't manage them through
         * the Mentor registers (except for setup), use the TI ones and EOI.
         */

	/* Acknowledge and handle non-CPPI interrupts */
	status = musb_readl(reg_base, DA8XX_USB_INTR_SRC_MASKED_REG);
	if (!status)
		goto eoi;

	musb_writel(reg_base, DA8XX_USB_INTR_SRC_CLEAR_REG, status);
	dev_dbg(musb->controller, "USB IRQ %08x\n", status);

	musb->int_rx = (status & DA8XX_INTR_RX_MASK) >> DA8XX_INTR_RX_SHIFT;
	musb->int_tx = (status & DA8XX_INTR_TX_MASK) >> DA8XX_INTR_TX_SHIFT;
	musb->int_usb = (status & DA8XX_INTR_USB_MASK) >> DA8XX_INTR_USB_SHIFT;

	/*
         * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
         * DA8xx's missing ID change IRQ.  We need an ID change IRQ to
         * switch appropriately between halves of the OTG state machine.
         * Managing DEVCTL.Session per Mentor docs requires that we know its
         * value but DEVCTL.BDevice is invalid without DEVCTL.Session set.
         * Also, DRVVBUS pulses for SRP (but not at 5 V)...
         */
	if (status & (DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT)) {
		int drvvbus = musb_readl(reg_base, DA8XX_USB_STAT_REG);
		void __iomem *mregs = musb->mregs;
		u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
		int err;

		err = musb->int_usb & MUSB_INTR_VBUSERROR;
		if (err) {
			/*
                         * The Mentor core doesn't debounce VBUS as needed
                         * to cope with device connect current spikes. This
                         * means it's not uncommon for bus-powered devices
                         * to get VBUS errors during enumeration.
                         *
                         * This is a workaround, but newer RTL from Mentor
                         * seems to allow a better one: "re"-starting sessions
                         * without waiting for VBUS to stop registering in
                         * devctl.
                         */
			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
			WARNING("VBUS error workaround (delay coming)\n");
		} else if (drvvbus) {
			MUSB_HST_MODE(musb);
			otg->default_a = 1;
			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
			del_timer(&otg_workaround);
		} else {
			musb->is_active = 0;
			MUSB_DEV_MODE(musb);
			otg->default_a = 0;
			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
		}

		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
				drvvbus ? "on" : "off",
				usb_otg_state_string(musb->xceiv->otg->state),
				err ? " ERROR" : "",
				devctl);
		ret = IRQ_HANDLED;
	}

	if (musb->int_tx || musb->int_rx || musb->int_usb)
		ret |= musb_interrupt(musb);

 eoi:
	/* EOI needs to be written for the IRQ to be re-asserted. */
	if (ret == IRQ_HANDLED || status)
		musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);

	/* Poll for ID change */
	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
		mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);

	spin_unlock_irqrestore(&musb->lock, flags);

	return ret;
}


Contributors
PersonTokensPropCommitsCommitProp
Sergei Shtylyov39391.18%112.50%


Heikki Krogerus133.02%112.50%


Felipe Balbi102.32%337.50%


Antoine Ténart102.32%112.50%


Anatolij Gustschin40.93%112.50%


Mikhail Kshevetskiy10.23%112.50%


Total431100.00%8100.00%






static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
{
	struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
	enum phy_mode phy_mode;

	/*
         * The PHY has some issues when it is forced in device or host mode.
         * Unless the user request another mode, configure the PHY in OTG mode.
         */
	if (!musb->is_initialized)
		return phy_set_mode(glue->phy, PHY_MODE_USB_OTG);

	switch (musb_mode) {
	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
		phy_mode = PHY_MODE_USB_HOST;
		break;
	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
		phy_mode = PHY_MODE_USB_DEVICE;
		break;
	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
		phy_mode = PHY_MODE_USB_OTG;
		break;
	default:
		return -EINVAL;
	}

	return phy_set_mode(glue->phy, phy_mode);
}


Contributors
PersonTokensPropCommitsCommitProp
Sergei Shtylyov4545.92%125.00%


David Lechner3333.67%125.00%


Alexandre Bailon1818.37%125.00%


Felipe Balbi22.04%125.00%


Total98100.00%4100.00%






static int da8xx_musb_init(struct musb *musb)
{
	struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
	void __iomem *reg_base = musb->ctrl_base;
	u32 rev;
	int ret = -ENODEV;

	musb->mregs += DA8XX_MENTOR_CORE_OFFSET;

	ret = clk_prepare_enable(glue->clk);
	if (ret) {
		dev_err(glue->dev, "failed to enable clock\n");
		return ret;
	}

	/* Returns zero if e.g. not clocked */
	rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
	if (!rev)
		goto fail;

	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
	if (IS_ERR_OR_NULL(musb->xceiv)) {
		ret = -EPROBE_DEFER;
		goto fail;
	}

	setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);

	/* Reset the controller */
	musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);

	/* Start the on-chip PHY and its PLL. */
	ret = phy_init(glue->phy);
	if (ret) {
		dev_err(glue->dev, "Failed to init phy.\n");
		goto fail;
	}

	ret = phy_power_on(glue->phy);
	if (ret) {
		dev_err(glue->dev, "Failed to power on phy.\n");
		goto err_phy_power_on;
	}

	msleep(5);

	/* NOTE: IRQs are in mixed mode, not bypass to pure MUSB */
	pr_debug("DA8xx OTG revision %08x, control %02x\n", rev,
		 musb_readb(reg_base, DA8XX_USB_CTRL_REG));

	musb->isr = da8xx_musb_interrupt;
	return 0;

err_phy_power_on:
	phy_exit(glue->phy);
fail:
	clk_disable_unprepare(glue->clk);
	return ret;
}


Contributors
PersonTokensPropCommitsCommitProp
Sergei Shtylyov11445.42%112.50%


David Lechner8433.47%112.50%


Alexandre Bailon2911.55%112.50%


Ming Lei145.58%112.50%


Kishon Vijay Abraham I72.79%337.50%


Felipe Balbi31.20%112.50%


Total251100.00%8100.00%






static int da8xx_musb_exit(struct musb *musb)
{
	struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);

	del_timer_sync(&otg_workaround);

	phy_power_off(glue->phy);
	phy_exit(glue->phy);
	clk_disable_unprepare(glue->clk);

	usb_put_phy(musb->xceiv);

	return 0;
}


Contributors
PersonTokensPropCommitsCommitProp
David Lechner3454.84%125.00%


Sergei Shtylyov2540.32%125.00%


Felipe Balbi23.23%125.00%


Kishon Vijay Abraham I11.61%125.00%


Total62100.00%4100.00%






static inline u8 get_vbus_power(struct device *dev)
{
	struct regulator *vbus_supply;
	int current_uA;

	vbus_supply = regulator_get_optional(dev, "vbus");
	if (IS_ERR(vbus_supply))
		return 255;
	current_uA = regulator_get_current_limit(vbus_supply);
	regulator_put(vbus_supply);
	if (current_uA <= 0 || current_uA > 510000)
		return 255;
	return current_uA / 1000 / 2;
}


Contributors
PersonTokensPropCommitsCommitProp
Petr Kulhavy71100.00%1100.00%


Total71100.00%1100.00%




static const struct musb_platform_ops da8xx_ops = {
	.quirks		= MUSB_INDEXED_EP | MUSB_PRESERVE_SESSION,
	.init		= da8xx_musb_init,
	.exit		= da8xx_musb_exit,

	.fifo_mode	= 2,
	.enable		= da8xx_musb_enable,
	.disable	= da8xx_musb_disable,

	.set_mode	= da8xx_musb_set_mode,
	.try_idle	= da8xx_musb_try_idle,

	.set_vbus	= da8xx_musb_set_vbus,
};


static const struct platform_device_info da8xx_dev_info = {
	.name		= "musb-hdrc",
	.id		= PLATFORM_DEVID_AUTO,
	.dma_mask	= DMA_BIT_MASK(32),
};


static const struct musb_hdrc_config da8xx_config = {
	.ram_bits = 10,
	.num_eps = 5,
	.multipoint = 1,
};




static int da8xx_probe(struct platform_device *pdev)
{
	struct resource musb_resources[2];
	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
	struct da8xx_glue		*glue;
	struct platform_device_info	pinfo;
	struct clk			*clk;
	struct device_node		*np = pdev->dev.of_node;
	int				ret;

	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
	if (!glue)
		return -ENOMEM;

	clk = devm_clk_get(&pdev->dev, "usb20");
	if (IS_ERR(clk)) {
		dev_err(&pdev->dev, "failed to get clock\n");
		return PTR_ERR(clk);
	}

	glue->phy = devm_phy_get(&pdev->dev, "usb-phy");
	if (IS_ERR(glue->phy)) {
		if (PTR_ERR(glue->phy) != -EPROBE_DEFER)
			dev_err(&pdev->dev, "failed to get phy\n");
		return PTR_ERR(glue->phy);
	}

	glue->dev			= &pdev->dev;
	glue->clk			= clk;

	if (IS_ENABLED(CONFIG_OF) && np) {
		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
		if (!pdata)
			return -ENOMEM;

		pdata->config	= &da8xx_config;
		pdata->mode	= musb_get_mode(&pdev->dev);
		pdata->power	= get_vbus_power(&pdev->dev);
	}

	pdata->platform_ops		= &da8xx_ops;

	glue->usb_phy = usb_phy_generic_register();
	ret = PTR_ERR_OR_ZERO(glue->usb_phy);
	if (ret) {
		dev_err(&pdev->dev, "failed to register usb_phy\n");
		return ret;
	}
	platform_set_drvdata(pdev, glue);

	memset(musb_resources, 0x00, sizeof(*musb_resources) *
			ARRAY_SIZE(musb_resources));

	musb_resources[0].name = pdev->resource[0].name;
	musb_resources[0].start = pdev->resource[0].start;
	musb_resources[0].end = pdev->resource[0].end;
	musb_resources[0].flags = pdev->resource[0].flags;

	musb_resources[1].name = pdev->resource[1].name;
	musb_resources[1].start = pdev->resource[1].start;
	musb_resources[1].end = pdev->resource[1].end;
	musb_resources[1].flags = pdev->resource[1].flags;

	pinfo = da8xx_dev_info;
	pinfo.parent = &pdev->dev;
	pinfo.res = musb_resources;
	pinfo.num_res = ARRAY_SIZE(musb_resources);
	pinfo.data = pdata;
	pinfo.size_data = sizeof(*pdata);

	glue->musb = platform_device_register_full(&pinfo);
	ret = PTR_ERR_OR_ZERO(glue->musb);
	if (ret) {
		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
		usb_phy_generic_unregister(glue->usb_phy);
	}

	return ret;
}


Contributors
PersonTokensPropCommitsCommitProp
Felipe Balbi33360.77%750.00%


Petr Kulhavy8014.60%17.14%


David Lechner6612.04%321.43%


Russell King478.58%17.14%


Arnd Bergmann183.28%17.14%


Jingoo Han40.73%17.14%


Total548100.00%14100.00%






static int da8xx_remove(struct platform_device *pdev)
{
	struct da8xx_glue		*glue = platform_get_drvdata(pdev);

	platform_device_unregister(glue->musb);
	usb_phy_generic_unregister(glue->usb_phy);

	return 0;
}


Contributors
PersonTokensPropCommitsCommitProp
Felipe Balbi3694.74%571.43%


David Lechner12.63%114.29%


Wei Yongjun12.63%114.29%


Total38100.00%7100.00%



#ifdef CONFIG_PM_SLEEP



static int da8xx_suspend(struct device *dev)
{
	int ret;
	struct da8xx_glue *glue = dev_get_drvdata(dev);

	ret = phy_power_off(glue->phy);
	if (ret)
		return ret;
	clk_disable_unprepare(glue->clk);

	return 0;
}


Contributors
PersonTokensPropCommitsCommitProp
Alexandre Bailon50100.00%1100.00%


Total50100.00%1100.00%






static int da8xx_resume(struct device *dev)
{
	int ret;
	struct da8xx_glue *glue = dev_get_drvdata(dev);

	ret = clk_prepare_enable(glue->clk);
	if (ret)
		return ret;
	return phy_power_on(glue->phy);
}

Contributors
PersonTokensPropCommitsCommitProp
Alexandre Bailon48100.00%1100.00%


Total48100.00%1100.00%



#endif

static SIMPLE_DEV_PM_OPS(da8xx_pm_ops, da8xx_suspend, da8xx_resume);

#ifdef CONFIG_OF

static const struct of_device_id da8xx_id_table[] = {
	{
		.compatible = "ti,da830-musb",
        },
	{},
};
MODULE_DEVICE_TABLE(of, da8xx_id_table);
#endif


static struct platform_driver da8xx_driver = {
	.probe		= da8xx_probe,
	.remove		= da8xx_remove,
	.driver		= {
		.name	= "musb-da8xx",
		.pm = &da8xx_pm_ops,
		.of_match_table = of_match_ptr(da8xx_id_table),
        },
};

MODULE_DESCRIPTION("DA8xx/OMAP-L1x MUSB Glue Layer");
MODULE_AUTHOR("Sergei Shtylyov <sshtylyov@ru.mvista.com>");
MODULE_LICENSE("GPL v2");

module_platform_driver(da8xx_driver);

Overall Contributors
PersonTokensPropCommitsCommitProp
Sergei Shtylyov125148.41%12.70%


Felipe Balbi54120.94%1335.14%


David Lechner2288.82%38.11%


Petr Kulhavy2138.24%12.70%


Alexandre Bailon1686.50%410.81%


Russell King662.55%12.70%


Antoine Ténart281.08%12.70%


Arnd Bergmann180.70%12.70%


Anatolij Gustschin160.62%12.70%


Ming Lei140.54%12.70%


Heikki Krogerus130.50%12.70%


Kishon Vijay Abraham I110.43%38.11%


Tony Lindgren100.39%25.41%


Jingoo Han40.15%12.70%


Srinivas Kandagatla10.04%12.70%


Wei Yongjun10.04%12.70%


Mikhail Kshevetskiy10.04%12.70%


Total2584100.00%37100.00%


Directory: drivers/usb/musb



Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.