cregit-Linux how code gets into the kernel

Release 4.11 drivers/usb/musb/ux500.c

Directory: drivers/usb/musb
/*
 * Copyright (C) 2010 ST-Ericsson AB
 * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
 *
 * Based on omap2430.c
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/usb/musb-ux500.h>

#include "musb_core.h"


static const struct musb_hdrc_config ux500_musb_hdrc_config = {
	.multipoint	= true,
	.dyn_fifo	= true,
	.num_eps	= 16,
	.ram_bits	= 16,
};


struct ux500_glue {
	
struct device		*dev;
	
struct platform_device	*musb;
	
struct clk		*clk;
};

#define glue_to_musb(g)	platform_get_drvdata(g->musb)


static void ux500_musb_set_vbus(struct musb *musb, int is_on) { u8 devctl; unsigned long timeout = jiffies + msecs_to_jiffies(1000); /* HDRC controls CPEN, but beware current surges during device * connect. They can trigger transient overcurrent conditions * that must be ignored. */ devctl = musb_readb(musb->mregs, MUSB_DEVCTL); if (is_on) { if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) { /* start the session */ devctl |= MUSB_DEVCTL_SESSION; musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); /* * Wait for the musb to set as A device to enable the * VBUS */ while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) { if (time_after(jiffies, timeout)) { dev_err(musb->controller, "configured as A device timeout"); break; } } } else { musb->is_active = 1; musb->xceiv->otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; devctl |= MUSB_DEVCTL_SESSION; MUSB_HST_MODE(musb); } } else { musb->is_active = 0; /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and jumping * right to B_IDLE... */ musb->xceiv->otg->default_a = 0; devctl &= ~MUSB_DEVCTL_SESSION; MUSB_DEV_MODE(musb); } musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); /* * Devctl values will be updated after vbus goes below * session_valid. The time taken depends on the capacitance * on VBUS line. The max discharge time can be upto 1 sec * as per the spec. Typically on our platform, it is 200ms */ if (!is_on) mdelay(200); dev_dbg(musb->controller, "VBUS %s, devctl %02x\n", usb_otg_state_string(musb->xceiv->otg->state), musb_readb(musb->mregs, MUSB_DEVCTL)); }

Contributors

PersonTokensPropCommitsCommitProp
Fabio Baltieri22697.41%150.00%
Antoine Ténart62.59%150.00%
Total232100.00%2100.00%


static int musb_otg_notifications(struct notifier_block *nb, unsigned long event, void *unused) { struct musb *musb = container_of(nb, struct musb, nb); dev_dbg(musb->controller, "musb_otg_notifications %ld %s\n", event, usb_otg_state_string(musb->xceiv->otg->state)); switch (event) { case UX500_MUSB_ID: dev_dbg(musb->controller, "ID GND\n"); ux500_musb_set_vbus(musb, 1); break; case UX500_MUSB_VBUS: dev_dbg(musb->controller, "VBUS Connect\n"); break; case UX500_MUSB_NONE: dev_dbg(musb->controller, "VBUS Disconnect\n"); if (is_host_active(musb)) ux500_musb_set_vbus(musb, 0); else musb->xceiv->otg->state = OTG_STATE_B_IDLE; break; default: dev_dbg(musb->controller, "ID float\n"); return NOTIFY_DONE; } return NOTIFY_OK; }

Contributors

PersonTokensPropCommitsCommitProp
Fabio Baltieri14597.32%266.67%
Antoine Ténart42.68%133.33%
Total149100.00%3100.00%


static irqreturn_t ux500_musb_interrupt(int irq, void *__hci) { unsigned long flags; irqreturn_t retval = IRQ_NONE; struct musb *musb = __hci; spin_lock_irqsave(&musb->lock, flags); musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); if (musb->int_usb || musb->int_tx || musb->int_rx) retval = musb_interrupt(musb); spin_unlock_irqrestore(&musb->lock, flags); return retval; }

Contributors

PersonTokensPropCommitsCommitProp
Philippe De Swert112100.00%1100.00%
Total112100.00%1100.00%


static int ux500_musb_init(struct musb *musb) { int status; musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) { pr_err("HS USB OTG: no transceiver configured\n"); return -EPROBE_DEFER; } musb->nb.notifier_call = musb_otg_notifications; status = usb_register_notifier(musb->xceiv, &musb->nb); if (status < 0) { dev_dbg(musb->controller, "notification register failed\n"); return status; } musb->isr = ux500_musb_interrupt; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Fabio Baltieri4547.87%114.29%
Mian Yousaf Kaukab3537.23%114.29%
Kishon Vijay Abraham I77.45%342.86%
Philippe De Swert66.38%114.29%
Ming Lei11.06%114.29%
Total94100.00%7100.00%


static int ux500_musb_exit(struct musb *musb) { usb_unregister_notifier(musb->xceiv, &musb->nb); usb_put_phy(musb->xceiv); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Mian Yousaf Kaukab2060.61%133.33%
Fabio Baltieri1236.36%133.33%
Kishon Vijay Abraham I13.03%133.33%
Total33100.00%3100.00%

static const struct musb_platform_ops ux500_ops = { .quirks = MUSB_DMA_UX500 | MUSB_INDEXED_EP, #ifdef CONFIG_USB_UX500_DMA .dma_init = ux500_dma_controller_create, .dma_exit = ux500_dma_controller_destroy, #endif .init = ux500_musb_init, .exit = ux500_musb_exit, .fifo_mode = 5, .set_vbus = ux500_musb_set_vbus, };
static struct musb_hdrc_platform_data * ux500_of_probe(struct platform_device *pdev, struct device_node *np) { struct musb_hdrc_platform_data *pdata; const char *mode; int strlen; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return NULL; mode = of_get_property(np, "dr_mode", &strlen); if (!mode) { dev_err(&pdev->dev, "No 'dr_mode' property found\n"); return NULL; } if (strlen > 0) { if (!strcmp(mode, "host")) pdata->mode = MUSB_HOST; if (!strcmp(mode, "otg")) pdata->mode = MUSB_OTG; if (!strcmp(mode, "peripheral")) pdata->mode = MUSB_PERIPHERAL; } return pdata; }

Contributors

PersonTokensPropCommitsCommitProp
Lee Jones148100.00%1100.00%
Total148100.00%1100.00%


static int ux500_probe(struct platform_device *pdev) { struct resource musb_resources[2]; struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); struct device_node *np = pdev->dev.of_node; struct platform_device *musb; struct ux500_glue *glue; struct clk *clk; int ret = -ENOMEM; if (!pdata) { if (np) { pdata = ux500_of_probe(pdev, np); if (!pdata) goto err0; pdev->dev.platform_data = pdata; } else { dev_err(&pdev->dev, "no pdata or device tree found\n"); goto err0; } } glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) goto err0; musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); goto err0; } clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); ret = PTR_ERR(clk); goto err1; } ret = clk_prepare_enable(clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock\n"); goto err1; } musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &pdev->dev.coherent_dma_mask; musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; glue->dev = &pdev->dev; glue->musb = musb; glue->clk = clk; pdata->platform_ops = &ux500_ops; pdata->config = &ux500_musb_hdrc_config; platform_set_drvdata(pdev, glue); memset(musb_resources, 0x00, sizeof(*musb_resources) * ARRAY_SIZE(musb_resources)); musb_resources[0].name = pdev->resource[0].name; musb_resources[0].start = pdev->resource[0].start; musb_resources[0].end = pdev->resource[0].end; musb_resources[0].flags = pdev->resource[0].flags; musb_resources[1].name = pdev->resource[1].name; musb_resources[1].start = pdev->resource[1].start; musb_resources[1].end = pdev->resource[1].end; musb_resources[1].flags = pdev->resource[1].flags; ret = platform_device_add_resources(musb, musb_resources, ARRAY_SIZE(musb_resources)); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); goto err2; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); goto err2; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); goto err2; } return 0; err2: clk_disable_unprepare(clk); err1: platform_device_put(musb); err0: return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Mian Yousaf Kaukab32355.88%218.18%
Felipe Balbi15827.34%19.09%
Lee Jones7512.98%436.36%
Himangi Saraogi152.60%19.09%
Jingoo Han40.69%19.09%
Fabio Baltieri20.35%19.09%
Sebastian Andrzej Siewior10.17%19.09%
Total578100.00%11100.00%


static int ux500_remove(struct platform_device *pdev) { struct ux500_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); clk_disable_unprepare(glue->clk); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Mian Yousaf Kaukab3694.74%133.33%
Fabio Baltieri12.63%133.33%
Wei Yongjun12.63%133.33%
Total38100.00%3100.00%

#ifdef CONFIG_PM_SLEEP
static int ux500_suspend(struct device *dev) { struct ux500_glue *glue = dev_get_drvdata(dev); struct musb *musb = glue_to_musb(glue); if (musb) usb_phy_set_suspend(musb->xceiv, 1); clk_disable_unprepare(glue->clk); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Mian Yousaf Kaukab4888.89%125.00%
Ulf Hansson47.41%125.00%
Fabio Baltieri11.85%125.00%
Heikki Krogerus11.85%125.00%
Total54100.00%4100.00%


static int ux500_resume(struct device *dev) { struct ux500_glue *glue = dev_get_drvdata(dev); struct musb *musb = glue_to_musb(glue); int ret; ret = clk_prepare_enable(glue->clk); if (ret) { dev_err(dev, "failed to enable clock\n"); return ret; } if (musb) usb_phy_set_suspend(musb->xceiv, 0); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Mian Yousaf Kaukab6992.00%125.00%
Ulf Hansson45.33%125.00%
Heikki Krogerus11.33%125.00%
Fabio Baltieri11.33%125.00%
Total75100.00%4100.00%

#endif static SIMPLE_DEV_PM_OPS(ux500_pm_ops, ux500_suspend, ux500_resume); static const struct of_device_id ux500_match[] = { { .compatible = "stericsson,db8500-musb", }, {} }; MODULE_DEVICE_TABLE(of, ux500_match); static struct platform_driver ux500_driver = { .probe = ux500_probe, .remove = ux500_remove, .driver = { .name = "musb-ux500", .pm = &ux500_pm_ops, .of_match_table = ux500_match, }, }; MODULE_DESCRIPTION("UX500 MUSB Glue Layer"); MODULE_AUTHOR("Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>"); MODULE_LICENSE("GPL v2"); module_platform_driver(ux500_driver);

Overall Contributors

PersonTokensPropCommitsCommitProp
Mian Yousaf Kaukab64436.93%26.06%
Fabio Baltieri44125.29%412.12%
Lee Jones27615.83%412.12%
Felipe Balbi1649.40%39.09%
Philippe De Swert1186.77%13.03%
Tony Lindgren271.55%412.12%
Himangi Saraogi150.86%13.03%
Daniel Mack120.69%13.03%
Kishon Vijay Abraham I110.63%39.09%
Antoine Ténart100.57%13.03%
Ulf Hansson80.46%13.03%
Luis de Bethencourt70.40%13.03%
Jingoo Han40.23%13.03%
Heikki Krogerus20.11%13.03%
Sebastian Andrzej Siewior10.06%13.03%
Srinivas Kandagatla10.06%13.03%
Ming Lei10.06%13.03%
Bhumika Goyal10.06%13.03%
Wei Yongjun10.06%13.03%
Total1744100.00%33100.00%
Directory: drivers/usb/musb
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.