cregit-Linux how code gets into the kernel

Release 4.11 drivers/usb/phy/phy-gpio-vbus-usb.c

Directory: drivers/usb/phy
/*
 * gpio-vbus.c - simple GPIO VBUS sensing driver for B peripheral devices
 *
 * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/usb.h>
#include <linux/workqueue.h>

#include <linux/regulator/consumer.h>

#include <linux/usb/gadget.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/usb/otg.h>


/*
 * A simple GPIO VBUS sensing driver for B peripheral only devices
 * with internal transceivers. It can control a D+ pullup GPIO and
 * a regulator to limit the current drawn from VBUS.
 *
 * Needs to be loaded before the UDC driver that will use it.
 */

struct gpio_vbus_data {
	
struct usb_phy		phy;
	
struct device          *dev;
	
struct regulator       *vbus_draw;
	
int			vbus_draw_enabled;
	
unsigned		mA;
	
struct delayed_work	work;
	
int			vbus;
	
int			irq;
};


/*
 * This driver relies on "both edges" triggering.  VBUS has 100 msec to
 * stabilize, so the peripheral controller driver may need to cope with
 * some bouncing due to current surges (e.g. charging local capacitance)
 * and contact chatter.
 *
 * REVISIT in desperate straits, toggling between rising and falling
 * edges might be workable.
 */

#define VBUS_IRQ_FLAGS \
	(IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)


/* interface to regulator framework */

static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA) { struct regulator *vbus_draw = gpio_vbus->vbus_draw; int enabled; int ret; if (!vbus_draw) return; enabled = gpio_vbus->vbus_draw_enabled; if (mA) { regulator_set_current_limit(vbus_draw, 0, 1000 * mA); if (!enabled) { ret = regulator_enable(vbus_draw); if (ret < 0) return; gpio_vbus->vbus_draw_enabled = 1; } } else { if (enabled) { ret = regulator_disable(vbus_draw); if (ret < 0) return; gpio_vbus->vbus_draw_enabled = 0; } } gpio_vbus->mA = mA; }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel9982.50%150.00%
Felipe Balbi2117.50%150.00%
Total120100.00%2100.00%


static int is_vbus_powered(struct gpio_vbus_mach_info *pdata) { int vbus; vbus = gpio_get_value(pdata->gpio_vbus); if (pdata->gpio_vbus_inverted) vbus = !vbus; return vbus; }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel2978.38%150.00%
Robert Jarzmik821.62%150.00%
Total37100.00%2100.00%


static void gpio_vbus_work(struct work_struct *work) { struct gpio_vbus_data *gpio_vbus = container_of(work, struct gpio_vbus_data, work.work); struct gpio_vbus_mach_info *pdata = dev_get_platdata(gpio_vbus->dev); int gpio, status, vbus; if (!gpio_vbus->phy.otg->gadget) return; vbus = is_vbus_powered(pdata); if ((vbus ^ gpio_vbus->vbus) == 0) return; gpio_vbus->vbus = vbus; /* Peripheral controllers which manage the pullup themselves won't have * gpio_pullup configured here. If it's configured here, we'll do what * isp1301_omap::b_peripheral() does and enable the pullup here... although * that may complicate usb_gadget_{,dis}connect() support. */ gpio = pdata->gpio_pullup; if (vbus) { status = USB_EVENT_VBUS; gpio_vbus->phy.otg->state = OTG_STATE_B_PERIPHERAL; gpio_vbus->phy.last_event = status; usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget); /* drawing a "unit load" is *always* OK, except for OTG */ set_vbus_draw(gpio_vbus, 100); /* optionally enable D+ pullup */ if (gpio_is_valid(gpio)) gpio_set_value(gpio, !pdata->gpio_pullup_inverted); atomic_notifier_call_chain(&gpio_vbus->phy.notifier, status, gpio_vbus->phy.otg->gadget); usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_ENUMERATED); } else { /* optionally disable D+ pullup */ if (gpio_is_valid(gpio)) gpio_set_value(gpio, pdata->gpio_pullup_inverted); set_vbus_draw(gpio_vbus, 0); usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget); status = USB_EVENT_NONE; gpio_vbus->phy.otg->state = OTG_STATE_B_IDLE; gpio_vbus->phy.last_event = status; atomic_notifier_call_chain(&gpio_vbus->phy.notifier, status, gpio_vbus->phy.otg->gadget); usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_NONE); } }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel10838.99%111.11%
Heiko Stübner6623.83%111.11%
Robert Jarzmik3412.27%111.11%
Shinya Kuribayashi3111.19%222.22%
Kiran Raparthy207.22%111.11%
Heikki Krogerus113.97%111.11%
Antoine Ténart41.44%111.11%
Jingoo Han31.08%111.11%
Total277100.00%9100.00%

/* VBUS change IRQ handler */
static irqreturn_t gpio_vbus_irq(int irq, void *data) { struct platform_device *pdev = data; struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev); struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); struct usb_otg *otg = gpio_vbus->phy.otg; dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n", is_vbus_powered(pdata) ? "supplied" : "inactive", otg->gadget ? otg->gadget->name : "none"); if (otg->gadget) schedule_delayed_work(&gpio_vbus->work, msecs_to_jiffies(100)); return IRQ_HANDLED; }

Contributors

PersonTokensPropCommitsCommitProp
Robert Jarzmik7973.83%120.00%
Heikki Krogerus1413.08%120.00%
Shinya Kuribayashi65.61%120.00%
Philipp Zabel43.74%120.00%
Jingoo Han43.74%120.00%
Total107100.00%5100.00%

/* OTG transceiver interface */ /* bind/unbind the peripheral controller */
static int gpio_vbus_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) { struct gpio_vbus_data *gpio_vbus; struct gpio_vbus_mach_info *pdata; struct platform_device *pdev; int gpio; gpio_vbus = container_of(otg->usb_phy, struct gpio_vbus_data, phy); pdev = to_platform_device(gpio_vbus->dev); pdata = dev_get_platdata(gpio_vbus->dev); gpio = pdata->gpio_pullup; if (!gadget) { dev_dbg(&pdev->dev, "unregistering gadget '%s'\n", otg->gadget->name); /* optionally disable D+ pullup */ if (gpio_is_valid(gpio)) gpio_set_value(gpio, pdata->gpio_pullup_inverted); set_vbus_draw(gpio_vbus, 0); usb_gadget_vbus_disconnect(otg->gadget); otg->state = OTG_STATE_UNDEFINED; otg->gadget = NULL; return 0; } otg->gadget = gadget; dev_dbg(&pdev->dev, "registered gadget '%s'\n", gadget->name); /* initialize connection state */ gpio_vbus->vbus = 0; /* start with disconnected */ gpio_vbus_irq(gpio_vbus->irq, pdev); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel16591.16%116.67%
Shinya Kuribayashi94.97%233.33%
Jingoo Han31.66%116.67%
Heikki Krogerus31.66%116.67%
Antoine Ténart10.55%116.67%
Total181100.00%6100.00%

/* effective for B devices, ignored for A-peripheral */
static int gpio_vbus_set_power(struct usb_phy *phy, unsigned mA) { struct gpio_vbus_data *gpio_vbus; gpio_vbus = container_of(phy, struct gpio_vbus_data, phy); if (phy->otg->state == OTG_STATE_B_PERIPHERAL) set_vbus_draw(gpio_vbus, mA); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel4486.27%125.00%
Heikki Krogerus59.80%250.00%
Antoine Ténart23.92%125.00%
Total51100.00%4100.00%

/* for non-OTG B devices: set/clear transceiver suspend mode */
static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend) { struct gpio_vbus_data *gpio_vbus; gpio_vbus = container_of(phy, struct gpio_vbus_data, phy); /* draw max 0 mA from vbus in suspend mode; or the previously * recorded amount of current if not suspended * * NOTE: high powered configs (mA > 100) may draw up to 2.5 mA * if they're wake-enabled ... we don't handle that yet. */ return gpio_vbus_set_power(phy, suspend ? 0 : gpio_vbus->mA); }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel4189.13%133.33%
Heikki Krogerus510.87%266.67%
Total46100.00%3100.00%

/* platform driver interface */
static int gpio_vbus_probe(struct platform_device *pdev) { struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev); struct gpio_vbus_data *gpio_vbus; struct resource *res; int err, gpio, irq; unsigned long irqflags; if (!pdata || !gpio_is_valid(pdata->gpio_vbus)) return -EINVAL; gpio = pdata->gpio_vbus; gpio_vbus = devm_kzalloc(&pdev->dev, sizeof(struct gpio_vbus_data), GFP_KERNEL); if (!gpio_vbus) return -ENOMEM; gpio_vbus->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg), GFP_KERNEL); if (!gpio_vbus->phy.otg) return -ENOMEM; platform_set_drvdata(pdev, gpio_vbus); gpio_vbus->dev = &pdev->dev; gpio_vbus->phy.label = "gpio-vbus"; gpio_vbus->phy.dev = gpio_vbus->dev; gpio_vbus->phy.set_power = gpio_vbus_set_power; gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend; gpio_vbus->phy.otg->state = OTG_STATE_UNDEFINED; gpio_vbus->phy.otg->usb_phy = &gpio_vbus->phy; gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral; err = devm_gpio_request(&pdev->dev, gpio, "vbus_detect"); if (err) { dev_err(&pdev->dev, "can't request vbus gpio %d, err: %d\n", gpio, err); return err; } gpio_direction_input(gpio); res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res) { irq = res->start; irqflags = (res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED; } else { irq = gpio_to_irq(gpio); irqflags = VBUS_IRQ_FLAGS; } gpio_vbus->irq = irq; /* if data line pullup is in use, initialize it to "not pulling up" */ gpio = pdata->gpio_pullup; if (gpio_is_valid(gpio)) { err = devm_gpio_request(&pdev->dev, gpio, "udc_pullup"); if (err) { dev_err(&pdev->dev, "can't request pullup gpio %d, err: %d\n", gpio, err); return err; } gpio_direction_output(gpio, pdata->gpio_pullup_inverted); } err = devm_request_irq(&pdev->dev, irq, gpio_vbus_irq, irqflags, "vbus_detect", pdev); if (err) { dev_err(&pdev->dev, "can't request irq %i, err: %d\n", irq, err); return err; } INIT_DELAYED_WORK(&gpio_vbus->work, gpio_vbus_work); gpio_vbus->vbus_draw = devm_regulator_get(&pdev->dev, "vbus_draw"); if (IS_ERR(gpio_vbus->vbus_draw)) { dev_dbg(&pdev->dev, "can't get vbus_draw regulator, err: %ld\n", PTR_ERR(gpio_vbus->vbus_draw)); gpio_vbus->vbus_draw = NULL; } /* only active when a gadget is registered */ err = usb_add_phy(&gpio_vbus->phy, USB_PHY_TYPE_USB2); if (err) { dev_err(&pdev->dev, "can't register transceiver, err: %d\n", err); return err; } device_init_wakeup(&pdev->dev, pdata->wakeup); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel33163.41%16.67%
Heikki Krogerus5610.73%16.67%
Himangi Saraogi438.24%16.67%
Shinya Kuribayashi366.90%426.67%
Dmitry Baryshkov275.17%16.67%
Robert Jarzmik193.64%213.33%
Jingoo Han40.77%16.67%
Kishon Vijay Abraham I30.57%213.33%
Antoine Ténart30.57%213.33%
Total522100.00%15100.00%


static int gpio_vbus_remove(struct platform_device *pdev) { struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); device_init_wakeup(&pdev->dev, 0); cancel_delayed_work_sync(&gpio_vbus->work); usb_remove_phy(&gpio_vbus->phy); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel2754.00%125.00%
Shinya Kuribayashi1836.00%250.00%
Kishon Vijay Abraham I510.00%125.00%
Total50100.00%4100.00%

#ifdef CONFIG_PM
static int gpio_vbus_pm_suspend(struct device *dev) { struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev); if (device_may_wakeup(dev)) enable_irq_wake(gpio_vbus->irq); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shinya Kuribayashi38100.00%1100.00%
Total38100.00%1100.00%


static int gpio_vbus_pm_resume(struct device *dev) { struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev); if (device_may_wakeup(dev)) disable_irq_wake(gpio_vbus->irq); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shinya Kuribayashi38100.00%1100.00%
Total38100.00%1100.00%

static const struct dev_pm_ops gpio_vbus_dev_pm_ops = { .suspend = gpio_vbus_pm_suspend, .resume = gpio_vbus_pm_resume, }; #endif MODULE_ALIAS("platform:gpio-vbus"); static struct platform_driver gpio_vbus_driver = { .driver = { .name = "gpio-vbus", #ifdef CONFIG_PM .pm = &gpio_vbus_dev_pm_ops, #endif }, .probe = gpio_vbus_probe, .remove = gpio_vbus_remove, }; module_platform_driver(gpio_vbus_driver); MODULE_DESCRIPTION("simple GPIO controlled OTG transceiver driver"); MODULE_AUTHOR("Philipp Zabel"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel95758.35%14.00%
Shinya Kuribayashi21913.35%728.00%
Robert Jarzmik1478.96%28.00%
Heikki Krogerus965.85%28.00%
Heiko Stübner664.02%14.00%
Himangi Saraogi432.62%14.00%
Dmitry Baryshkov271.65%14.00%
Felipe Balbi211.28%14.00%
Kiran Raparthy201.22%14.00%
Jingoo Han140.85%14.00%
Antoine Ténart100.61%28.00%
Kishon Vijay Abraham I80.49%28.00%
Johan Hovold60.37%14.00%
Tejun Heo30.18%14.00%
Paul Gortmaker30.18%14.00%
Total1640100.00%25100.00%
Directory: drivers/usb/phy
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.