cregit-Linux how code gets into the kernel

Release 4.11 drivers/usb/phy/phy-qcom-8x16-usb.c

Directory: drivers/usb/phy
/*
 * Copyright (c) 2015, Linaro Limited
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 */

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/extcon.h>
#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/ulpi.h>


#define HSPHY_AHBBURST			0x0090

#define HSPHY_AHBMODE			0x0098

#define HSPHY_GENCONFIG			0x009c

#define HSPHY_GENCONFIG_2		0x00a0


#define HSPHY_USBCMD			0x0140

#define HSPHY_ULPI_VIEWPORT		0x0170

#define HSPHY_CTRL			0x0240


#define HSPHY_TXFIFO_IDLE_FORCE_DIS	BIT(4)

#define HSPHY_SESS_VLD_CTRL_EN		BIT(7)

#define HSPHY_POR_ASSERT		BIT(0)

#define HSPHY_RETEN			BIT(1)


#define HSPHY_SESS_VLD_CTRL		BIT(25)


#define ULPI_PWR_CLK_MNG_REG		0x88

#define ULPI_PWR_OTG_COMP_DISABLE	BIT(0)


#define ULPI_MISC_A			0x96

#define ULPI_MISC_A_VBUSVLDEXTSEL	BIT(1)

#define ULPI_MISC_A_VBUSVLDEXT		BIT(0)


#define HSPHY_3P3_MIN			3050000 
/* uV */

#define HSPHY_3P3_MAX			3300000 
/* uV */


#define HSPHY_1P8_MIN			1800000 
/* uV */

#define HSPHY_1P8_MAX			1800000 
/* uV */


#define HSPHY_VDD_MIN			5

#define HSPHY_VDD_MAX			7


struct phy_8x16 {
	
struct usb_phy			phy;
	
void __iomem			*regs;
	
struct clk			*core_clk;
	
struct clk			*iface_clk;
	
struct regulator_bulk_data	regulator[3];

	
struct reset_control		*phy_reset;

	
struct extcon_dev		*vbus_edev;
	
struct notifier_block		vbus_notify;

	
struct gpio_desc		*switch_gpio;
	
struct notifier_block		reboot_notify;
};


static int phy_8x16_notify_connect(struct usb_phy *phy, enum usb_device_speed speed) { struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy); u32 val; val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT; usb_phy_io_write(&qphy->phy, val, ULPI_SET(ULPI_MISC_A)); val = readl(qphy->regs + HSPHY_USBCMD); val |= HSPHY_SESS_VLD_CTRL; writel(val, qphy->regs + HSPHY_USBCMD); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Ivan T. Ivanov83100.00%1100.00%
Total83100.00%1100.00%


static int phy_8x16_notify_disconnect(struct usb_phy *phy, enum usb_device_speed speed) { struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy); u32 val; val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL; usb_phy_io_write(&qphy->phy, val, ULPI_CLR(ULPI_MISC_A)); val = readl(qphy->regs + HSPHY_USBCMD); val &= ~HSPHY_SESS_VLD_CTRL; writel(val, qphy->regs + HSPHY_USBCMD); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Ivan T. Ivanov84100.00%1100.00%
Total84100.00%1100.00%


static int phy_8x16_vbus_on(struct phy_8x16 *qphy) { phy_8x16_notify_connect(&qphy->phy, USB_SPEED_UNKNOWN); /* Switch D+/D- lines to Device connector */ gpiod_set_value_cansleep(qphy->switch_gpio, 0); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Ivan T. Ivanov34100.00%1100.00%
Total34100.00%1100.00%


static int phy_8x16_vbus_off(struct phy_8x16 *qphy) { phy_8x16_notify_disconnect(&qphy->phy, USB_SPEED_UNKNOWN); /* Switch D+/D- lines to USB HUB */ gpiod_set_value_cansleep(qphy->switch_gpio, 1); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Ivan T. Ivanov34100.00%1100.00%
Total34100.00%1100.00%


static int phy_8x16_vbus_notify(struct notifier_block *nb, unsigned long event, void *ptr) { struct phy_8x16 *qphy = container_of(nb, struct phy_8x16, vbus_notify); if (event) phy_8x16_vbus_on(qphy); else phy_8x16_vbus_off(qphy); return NOTIFY_DONE; }

Contributors

PersonTokensPropCommitsCommitProp
Ivan T. Ivanov52100.00%1100.00%
Total52100.00%1100.00%


static int phy_8x16_init(struct usb_phy *phy) { struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy); u32 val, init[] = {0x44, 0x6B, 0x24, 0x13}; u32 addr = ULPI_EXT_VENDOR_SPECIFIC; int idx, state; for (idx = 0; idx < ARRAY_SIZE(init); idx++) usb_phy_io_write(phy, init[idx], addr + idx); reset_control_reset(qphy->phy_reset); /* Assert USB HSPHY_POR */ val = readl(qphy->regs + HSPHY_CTRL); val |= HSPHY_POR_ASSERT; writel(val, qphy->regs + HSPHY_CTRL); /* * wait for minimum 10 microseconds as suggested in HPG. * Use a slightly larger value since the exact value didn't * work 100% of the time. */ usleep_range(12, 15); /* Deassert USB HSPHY_POR */ val = readl(qphy->regs + HSPHY_CTRL); val &= ~HSPHY_POR_ASSERT; writel(val, qphy->regs + HSPHY_CTRL); usleep_range(10, 15); writel(0x00, qphy->regs + HSPHY_AHBBURST); writel(0x08, qphy->regs + HSPHY_AHBMODE); /* workaround for rx buffer collision issue */ val = readl(qphy->regs + HSPHY_GENCONFIG); val &= ~HSPHY_TXFIFO_IDLE_FORCE_DIS; writel(val, qphy->regs + HSPHY_GENCONFIG); val = readl(qphy->regs + HSPHY_GENCONFIG_2); val |= HSPHY_SESS_VLD_CTRL_EN; writel(val, qphy->regs + HSPHY_GENCONFIG_2); val = ULPI_PWR_OTG_COMP_DISABLE; usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG)); state = extcon_get_state(qphy->vbus_edev, EXTCON_USB); if (state) phy_8x16_vbus_on(qphy); else phy_8x16_vbus_off(qphy); val = usb_phy_io_read(&qphy->phy, ULPI_FUNC_CTRL); val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; val |= ULPI_FUNC_CTRL_OPMODE_NORMAL; usb_phy_io_write(&qphy->phy, val, ULPI_FUNC_CTRL); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Ivan T. Ivanov31299.68%266.67%
Chanwoo Choi10.32%133.33%
Total313100.00%3100.00%


static void phy_8x16_shutdown(struct usb_phy *phy) { u32 val; /* Put the controller in non-driving mode */ val = usb_phy_io_read(phy, ULPI_FUNC_CTRL); val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; usb_phy_io_write(phy, val, ULPI_FUNC_CTRL); }

Contributors

PersonTokensPropCommitsCommitProp
Ivan T. Ivanov42100.00%1100.00%
Total42100.00%1100.00%


static int phy_8x16_read_devicetree(struct phy_8x16 *qphy) { struct device *dev = qphy->phy.dev; int ret; qphy->core_clk = devm_clk_get(dev, "core"); if (IS_ERR(qphy->core_clk)) return PTR_ERR(qphy->core_clk); qphy->iface_clk = devm_clk_get(dev, "iface"); if (IS_ERR(qphy->iface_clk)) return PTR_ERR(qphy->iface_clk); qphy->regulator[0].supply = "v3p3"; qphy->regulator[1].supply = "v1p8"; qphy->regulator[2].supply = "vddcx"; ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->regulator), qphy->regulator); if (ret) return ret; qphy->phy_reset = devm_reset_control_get(dev, "phy"); if (IS_ERR(qphy->phy_reset)) return PTR_ERR(qphy->phy_reset); qphy->switch_gpio = devm_gpiod_get_optional(dev, "switch", GPIOD_OUT_LOW); return PTR_ERR_OR_ZERO(qphy->switch_gpio); }

Contributors

PersonTokensPropCommitsCommitProp
Ivan T. Ivanov17291.49%133.33%
Arnd Bergmann157.98%133.33%
Felipe Balbi10.53%133.33%
Total188100.00%3100.00%


static int phy_8x16_reboot_notify(struct notifier_block *this, unsigned long code, void *unused) { struct phy_8x16 *qphy; qphy = container_of(this, struct phy_8x16, reboot_notify); /* * Ensure that D+/D- lines are routed to uB connector, so * we could load bootloader/kernel at next reboot_notify */ gpiod_set_value_cansleep(qphy->switch_gpio, 0); return NOTIFY_DONE; }

Contributors

PersonTokensPropCommitsCommitProp
Ivan T. Ivanov49100.00%1100.00%
Total49100.00%1100.00%


static int phy_8x16_probe(struct platform_device *pdev) { struct phy_8x16 *qphy; struct resource *res; struct usb_phy *phy; int ret; qphy = devm_kzalloc(&pdev->dev, sizeof(*qphy), GFP_KERNEL); if (!qphy) return -ENOMEM; platform_set_drvdata(pdev, qphy); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -EINVAL; qphy->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!qphy->regs) return -ENOMEM; phy = &qphy->phy; phy->dev = &pdev->dev; phy->label = dev_name(&pdev->dev); phy->init = phy_8x16_init; phy->shutdown = phy_8x16_shutdown; phy->notify_connect = phy_8x16_notify_connect; phy->notify_disconnect = phy_8x16_notify_disconnect; phy->io_priv = qphy->regs + HSPHY_ULPI_VIEWPORT; phy->io_ops = &ulpi_viewport_access_ops; phy->type = USB_PHY_TYPE_USB2; ret = phy_8x16_read_devicetree(qphy); if (ret < 0) return ret; qphy->vbus_edev = extcon_get_edev_by_phandle(phy->dev, 0); if (IS_ERR(qphy->vbus_edev)) return PTR_ERR(qphy->vbus_edev); ret = clk_set_rate(qphy->core_clk, INT_MAX); if (ret < 0) dev_dbg(phy->dev, "Can't boost core clock\n"); ret = clk_prepare_enable(qphy->core_clk); if (ret < 0) return ret; ret = clk_prepare_enable(qphy->iface_clk); if (ret < 0) goto off_core; ret = regulator_bulk_enable(ARRAY_SIZE(qphy->regulator), qphy->regulator); if (WARN_ON(ret)) goto off_clks; qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify; ret = devm_extcon_register_notifier(&pdev->dev, qphy->vbus_edev, EXTCON_USB, &qphy->vbus_notify); if (ret < 0) goto off_power; ret = usb_add_phy_dev(&qphy->phy); if (ret) goto off_power; qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify; register_reboot_notifier(&qphy->reboot_notify); return 0; off_power: regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator); off_clks: clk_disable_unprepare(qphy->iface_clk); off_core: clk_disable_unprepare(qphy->core_clk); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Ivan T. Ivanov40593.10%250.00%
Arnd Bergmann235.29%125.00%
Chanwoo Choi71.61%125.00%
Total435100.00%4100.00%


static int phy_8x16_remove(struct platform_device *pdev) { struct phy_8x16 *qphy = platform_get_drvdata(pdev); unregister_reboot_notifier(&qphy->reboot_notify); /* * Ensure that D+/D- lines are routed to uB connector, so * we could load bootloader/kernel at next reboot_notify */ gpiod_set_value_cansleep(qphy->switch_gpio, 0); usb_remove_phy(&qphy->phy); clk_disable_unprepare(qphy->iface_clk); clk_disable_unprepare(qphy->core_clk); regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Ivan T. Ivanov6887.18%150.00%
Arnd Bergmann1012.82%150.00%
Total78100.00%2100.00%

static const struct of_device_id phy_8x16_dt_match[] = { { .compatible = "qcom,usb-8x16-phy" }, { } }; MODULE_DEVICE_TABLE(of, phy_8x16_dt_match); static struct platform_driver phy_8x16_driver = { .probe = phy_8x16_probe, .remove = phy_8x16_remove, .driver = { .name = "phy-qcom-8x16-usb", .of_match_table = phy_8x16_dt_match, }, }; module_platform_driver(phy_8x16_driver); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Qualcomm APQ8016/MSM8916 chipsets USB transceiver driver");

Overall Contributors

PersonTokensPropCommitsCommitProp
Ivan T. Ivanov160296.33%240.00%
Arnd Bergmann523.13%120.00%
Chanwoo Choi80.48%120.00%
Felipe Balbi10.06%120.00%
Total1663100.00%5100.00%
Directory: drivers/usb/phy
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.