Release 4.11 drivers/watchdog/nv_tco.h

/*
 *      nv_tco: TCO timer driver for nVidia chipsets.
 *
 *      (c) Copyright 2005 Google Inc., All Rights Reserved.
 *
 *      Supported Chipsets:
 *              - MCP51/MCP55
 *
 *      (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights
 *      Reserved.
 *                              http://www.kernelconcepts.de
 *
 *      This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License
 *      as published by the Free Software Foundation; either version
 *      2 of the License, or (at your option) any later version.
 *
 *      Neither kernel concepts nor Nils Faerber admit liability nor provide
 *      warranty for any of this software. This material is provided
 *      "AS-IS" and at no charge.
 *
 *      (c) Copyright 2000      kernel concepts <nils@kernelconcepts.de>
 *                              developed for
 *                              Jentro AG, Haar/Munich (Germany)
 *
 *      TCO timer driver for NV chipsets
 *      based on softdog.c by Alan Cox <alan@redhat.com>
 */

/*
 * Some address definitions for the TCO
 */


#define TCO_RLD(base)	((base) + 0x00)	
/* TCO Timer Reload and Current Value */

#define TCO_TMR(base)	((base) + 0x01)	
/* TCO Timer Initial Value      */


#define TCO_STS(base)	((base) + 0x04)	
/* TCO Status Register          */
/*
 * TCO Boot Status bit: set on TCO reset, reset by software or standby
 * power-good (survives reboots), unfortunately this bit is never
 * set.
 */

#  define TCO_STS_BOOT_STS	(1 << 9)
/*
 * first and 2nd timeout status bits, these also survive a warm boot,
 * and they work, so we use them.
 */

#  define TCO_STS_TCO_INT_STS	(1 << 1)

#  define TCO_STS_TCO2TO_STS	(1 << 10)

#  define TCO_STS_RESET		(TCO_STS_BOOT_STS | TCO_STS_TCO2TO_STS | \
                                 TCO_STS_TCO_INT_STS)


#define TCO_CNT(base)	((base) + 0x08)	
/* TCO Control Register */

#  define TCO_CNT_TCOHALT	(1 << 12)


#define MCP51_SMBUS_SETUP_B 0xe8

#  define MCP51_SMBUS_SETUP_B_TCO_REBOOT (1 << 25)

/*
 * The SMI_EN register is at the base io address + 0x04,
 * while TCOBASE is + 0x40.
 */

#define MCP51_SMI_EN(base)	((base) - 0x40 + 0x04)

#  define MCP51_SMI_EN_TCO	((1 << 4) | (1 << 5))
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Mike Waychison
76
100.00%
1
100.00%
Total
76
100.00%
1
100.00%
Directory: drivers/watchdog

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.