Release 4.11 fs/xfs/xfs_log_recover.c
/*
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_bit.h"
#include "xfs_sb.h"
#include "xfs_mount.h"
#include "xfs_da_format.h"
#include "xfs_da_btree.h"
#include "xfs_inode.h"
#include "xfs_trans.h"
#include "xfs_log.h"
#include "xfs_log_priv.h"
#include "xfs_log_recover.h"
#include "xfs_inode_item.h"
#include "xfs_extfree_item.h"
#include "xfs_trans_priv.h"
#include "xfs_alloc.h"
#include "xfs_ialloc.h"
#include "xfs_quota.h"
#include "xfs_cksum.h"
#include "xfs_trace.h"
#include "xfs_icache.h"
#include "xfs_bmap_btree.h"
#include "xfs_error.h"
#include "xfs_dir2.h"
#include "xfs_rmap_item.h"
#include "xfs_buf_item.h"
#include "xfs_refcount_item.h"
#include "xfs_bmap_item.h"
#define BLK_AVG(blk1, blk2) ((blk1+blk2) >> 1)
STATIC int
xlog_find_zeroed(
struct xlog *,
xfs_daddr_t *);
STATIC int
xlog_clear_stale_blocks(
struct xlog *,
xfs_lsn_t);
#if defined(DEBUG)
STATIC void
xlog_recover_check_summary(
struct xlog *);
#else
#define xlog_recover_check_summary(log)
#endif
STATIC int
xlog_do_recovery_pass(
struct xlog *, xfs_daddr_t, xfs_daddr_t, int, xfs_daddr_t *);
/*
* This structure is used during recovery to record the buf log items which
* have been canceled and should not be replayed.
*/
struct xfs_buf_cancel {
xfs_daddr_t bc_blkno;
uint bc_len;
int bc_refcount;
struct list_head bc_list;
};
/*
* Sector aligned buffer routines for buffer create/read/write/access
*/
/*
* Verify the given count of basic blocks is valid number of blocks
* to specify for an operation involving the given XFS log buffer.
* Returns nonzero if the count is valid, 0 otherwise.
*/
static inline int
xlog_buf_bbcount_valid(
struct xlog *log,
int bbcount)
{
return bbcount > 0 && bbcount <= log->l_logBBsize;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alex Elder | 24 | 92.31% | 1 | 50.00% |
| Mark Tinguely | 2 | 7.69% | 1 | 50.00% |
| Total | 26 | 100.00% | 2 | 100.00% |
/*
* Allocate a buffer to hold log data. The buffer needs to be able
* to map to a range of nbblks basic blocks at any valid (basic
* block) offset within the log.
*/
STATIC xfs_buf_t *
xlog_get_bp(
struct xlog *log,
int nbblks)
{
struct xfs_buf *bp;
if (!xlog_buf_bbcount_valid(log, nbblks)) {
xfs_warn(log->l_mp, "Invalid block length (0x%x) for buffer",
nbblks);
XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_HIGH, log->l_mp);
return NULL;
}
/*
* We do log I/O in units of log sectors (a power-of-2
* multiple of the basic block size), so we round up the
* requested size to accommodate the basic blocks required
* for complete log sectors.
*
* In addition, the buffer may be used for a non-sector-
* aligned block offset, in which case an I/O of the
* requested size could extend beyond the end of the
* buffer. If the requested size is only 1 basic block it
* will never straddle a sector boundary, so this won't be
* an issue. Nor will this be a problem if the log I/O is
* done in basic blocks (sector size 1). But otherwise we
* extend the buffer by one extra log sector to ensure
* there's space to accommodate this possibility.
*/
if (nbblks > 1 && log->l_sectBBsize > 1)
nbblks += log->l_sectBBsize;
nbblks = round_up(nbblks, log->l_sectBBsize);
bp = xfs_buf_get_uncached(log->l_mp->m_logdev_targp, nbblks, 0);
if (bp)
xfs_buf_unlock(bp);
return bp;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 33 | 28.95% | 2 | 14.29% |
| David Chinner | 27 | 23.68% | 1 | 7.14% |
| Alex Elder | 20 | 17.54% | 4 | 28.57% |
| Nathan Scott | 19 | 16.67% | 2 | 14.29% |
| Dave Chinner | 11 | 9.65% | 2 | 14.29% |
| Mark Tinguely | 2 | 1.75% | 1 | 7.14% |
| Lucas De Marchi | 1 | 0.88% | 1 | 7.14% |
| Eric Sandeen | 1 | 0.88% | 1 | 7.14% |
| Total | 114 | 100.00% | 14 | 100.00% |
STATIC void
xlog_put_bp(
xfs_buf_t *bp)
{
xfs_buf_free(bp);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 13 | 86.67% | 1 | 33.33% |
| Nathan Scott | 1 | 6.67% | 1 | 33.33% |
| Eric Sandeen | 1 | 6.67% | 1 | 33.33% |
| Total | 15 | 100.00% | 3 | 100.00% |
/*
* Return the address of the start of the given block number's data
* in a log buffer. The buffer covers a log sector-aligned region.
*/
STATIC char *
xlog_align(
struct xlog *log,
xfs_daddr_t blk_no,
int nbblks,
struct xfs_buf *bp)
{
xfs_daddr_t offset = blk_no & ((xfs_daddr_t)log->l_sectBBsize - 1);
ASSERT(offset + nbblks <= bp->b_length);
return bp->b_addr + BBTOB(offset);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 36 | 60.00% | 3 | 37.50% |
| Alex Elder | 16 | 26.67% | 2 | 25.00% |
| Mark Tinguely | 4 | 6.67% | 1 | 12.50% |
| Chandra Seetharaman | 2 | 3.33% | 1 | 12.50% |
| Dave Chinner | 2 | 3.33% | 1 | 12.50% |
| Total | 60 | 100.00% | 8 | 100.00% |
/*
* nbblks should be uint, but oh well. Just want to catch that 32-bit length.
*/
STATIC int
xlog_bread_noalign(
struct xlog *log,
xfs_daddr_t blk_no,
int nbblks,
struct xfs_buf *bp)
{
int error;
if (!xlog_buf_bbcount_valid(log, nbblks)) {
xfs_warn(log->l_mp, "Invalid block length (0x%x) for buffer",
nbblks);
XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_HIGH, log->l_mp);
return -EFSCORRUPTED;
}
blk_no = round_down(blk_no, log->l_sectBBsize);
nbblks = round_up(nbblks, log->l_sectBBsize);
ASSERT(nbblks > 0);
ASSERT(nbblks <= bp->b_length);
XFS_BUF_SET_ADDR(bp, log->l_logBBstart + blk_no);
bp->b_flags |= XBF_READ;
bp->b_io_length = nbblks;
bp->b_error = 0;
error = xfs_buf_submit_wait(bp);
if (error && !XFS_FORCED_SHUTDOWN(log->l_mp))
xfs_buf_ioerror_alert(bp, __func__);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 70 | 44.03% | 3 | 17.65% |
| David Chinner | 29 | 18.24% | 3 | 17.65% |
| Dave Chinner | 28 | 17.61% | 6 | 35.29% |
| Alex Elder | 17 | 10.69% | 3 | 17.65% |
| Nathan Scott | 11 | 6.92% | 1 | 5.88% |
| Mark Tinguely | 4 | 2.52% | 1 | 5.88% |
| Total | 159 | 100.00% | 17 | 100.00% |
STATIC int
xlog_bread(
struct xlog *log,
xfs_daddr_t blk_no,
int nbblks,
struct xfs_buf *bp,
char **offset)
{
int error;
error = xlog_bread_noalign(log, blk_no, nbblks, bp);
if (error)
return error;
*offset = xlog_align(log, blk_no, nbblks, bp);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 63 | 94.03% | 2 | 66.67% |
| Mark Tinguely | 4 | 5.97% | 1 | 33.33% |
| Total | 67 | 100.00% | 3 | 100.00% |
/*
* Read at an offset into the buffer. Returns with the buffer in it's original
* state regardless of the result of the read.
*/
STATIC int
xlog_bread_offset(
struct xlog *log,
xfs_daddr_t blk_no, /* block to read from */
int nbblks, /* blocks to read */
struct xfs_buf *bp,
char *offset)
{
char *orig_offset = bp->b_addr;
int orig_len = BBTOB(bp->b_length);
int error, error2;
error = xfs_buf_associate_memory(bp, offset, BBTOB(nbblks));
if (error)
return error;
error = xlog_bread_noalign(log, blk_no, nbblks, bp);
/* must reset buffer pointer even on error */
error2 = xfs_buf_associate_memory(bp, orig_offset, orig_len);
if (error)
return error;
return error2;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 95 | 88.79% | 2 | 33.33% |
| Mark Tinguely | 4 | 3.74% | 1 | 16.67% |
| Christoph Hellwig | 4 | 3.74% | 1 | 16.67% |
| Chandra Seetharaman | 4 | 3.74% | 2 | 33.33% |
| Total | 107 | 100.00% | 6 | 100.00% |
/*
* Write out the buffer at the given block for the given number of blocks.
* The buffer is kept locked across the write and is returned locked.
* This can only be used for synchronous log writes.
*/
STATIC int
xlog_bwrite(
struct xlog *log,
xfs_daddr_t blk_no,
int nbblks,
struct xfs_buf *bp)
{
int error;
if (!xlog_buf_bbcount_valid(log, nbblks)) {
xfs_warn(log->l_mp, "Invalid block length (0x%x) for buffer",
nbblks);
XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_HIGH, log->l_mp);
return -EFSCORRUPTED;
}
blk_no = round_down(blk_no, log->l_sectBBsize);
nbblks = round_up(nbblks, log->l_sectBBsize);
ASSERT(nbblks > 0);
ASSERT(nbblks <= bp->b_length);
XFS_BUF_SET_ADDR(bp, log->l_logBBstart + blk_no);
xfs_buf_hold(bp);
xfs_buf_lock(bp);
bp->b_io_length = nbblks;
bp->b_error = 0;
error = xfs_bwrite(bp);
if (error)
xfs_buf_ioerror_alert(bp, __func__);
xfs_buf_relse(bp);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 81 | 50.62% | 5 | 29.41% |
| David Chinner | 25 | 15.62% | 2 | 11.76% |
| Alex Elder | 17 | 10.62% | 3 | 17.65% |
| Nathan Scott | 17 | 10.62% | 1 | 5.88% |
| Dave Chinner | 15 | 9.38% | 4 | 23.53% |
| Mark Tinguely | 4 | 2.50% | 1 | 5.88% |
| Chandra Seetharaman | 1 | 0.62% | 1 | 5.88% |
| Total | 160 | 100.00% | 17 | 100.00% |
#ifdef DEBUG
/*
* dump debug superblock and log record information
*/
STATIC void
xlog_header_check_dump(
xfs_mount_t *mp,
xlog_rec_header_t *head)
{
xfs_debug(mp, "%s: SB : uuid = %pU, fmt = %d",
__func__, &mp->m_sb.sb_uuid, XLOG_FMT);
xfs_debug(mp, " log : uuid = %pU, fmt = %d",
&head->h_fs_uuid, be32_to_cpu(head->h_fmt));
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 41 | 80.39% | 3 | 37.50% |
| Dave Chinner | 4 | 7.84% | 1 | 12.50% |
| Nathan Scott | 3 | 5.88% | 2 | 25.00% |
| Eric Sandeen | 2 | 3.92% | 1 | 12.50% |
| Harvey Harrison | 1 | 1.96% | 1 | 12.50% |
| Total | 51 | 100.00% | 8 | 100.00% |
#else
#define xlog_header_check_dump(mp, head)
#endif
/*
* check log record header for recovery
*/
STATIC int
xlog_header_check_recover(
xfs_mount_t *mp,
xlog_rec_header_t *head)
{
ASSERT(head->h_magicno == cpu_to_be32(XLOG_HEADER_MAGIC_NUM));
/*
* IRIX doesn't write the h_fmt field and leaves it zeroed
* (XLOG_FMT_UNKNOWN). This stops us from trying to recover
* a dirty log created in IRIX.
*/
if (unlikely(head->h_fmt != cpu_to_be32(XLOG_FMT))) {
xfs_warn(mp,
"dirty log written in incompatible format - can't recover");
xlog_header_check_dump(mp, head);
XFS_ERROR_REPORT("xlog_header_check_recover(1)",
XFS_ERRLEVEL_HIGH, mp);
return -EFSCORRUPTED;
} else if (unlikely(!uuid_equal(&mp->m_sb.sb_uuid, &head->h_fs_uuid))) {
xfs_warn(mp,
"dirty log entry has mismatched uuid - can't recover");
xlog_header_check_dump(mp, head);
XFS_ERROR_REPORT("xlog_header_check_recover(2)",
XFS_ERRLEVEL_HIGH, mp);
return -EFSCORRUPTED;
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 89 | 71.77% | 2 | 28.57% |
| Glen Overby | 22 | 17.74% | 1 | 14.29% |
| Dave Chinner | 10 | 8.06% | 2 | 28.57% |
| Eric Sandeen | 2 | 1.61% | 1 | 14.29% |
| Nathan Scott | 1 | 0.81% | 1 | 14.29% |
| Total | 124 | 100.00% | 7 | 100.00% |
/*
* read the head block of the log and check the header
*/
STATIC int
xlog_header_check_mount(
xfs_mount_t *mp,
xlog_rec_header_t *head)
{
ASSERT(head->h_magicno == cpu_to_be32(XLOG_HEADER_MAGIC_NUM));
if (uuid_is_nil(&head->h_fs_uuid)) {
/*
* IRIX doesn't write the h_fs_uuid or h_fmt fields. If
* h_fs_uuid is nil, we assume this log was last mounted
* by IRIX and continue.
*/
xfs_warn(mp, "nil uuid in log - IRIX style log");
} else if (unlikely(!uuid_equal(&mp->m_sb.sb_uuid, &head->h_fs_uuid))) {
xfs_warn(mp, "log has mismatched uuid - can't recover");
xlog_header_check_dump(mp, head);
XFS_ERROR_REPORT("xlog_header_check_mount",
XFS_ERRLEVEL_HIGH, mp);
return -EFSCORRUPTED;
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 78 | 78.00% | 2 | 28.57% |
| Glen Overby | 11 | 11.00% | 1 | 14.29% |
| Dave Chinner | 9 | 9.00% | 2 | 28.57% |
| Eric Sandeen | 1 | 1.00% | 1 | 14.29% |
| Nathan Scott | 1 | 1.00% | 1 | 14.29% |
| Total | 100 | 100.00% | 7 | 100.00% |
STATIC void
xlog_recover_iodone(
struct xfs_buf *bp)
{
if (bp->b_error) {
/*
* We're not going to bother about retrying
* this during recovery. One strike!
*/
if (!XFS_FORCED_SHUTDOWN(bp->b_target->bt_mount)) {
xfs_buf_ioerror_alert(bp, __func__);
xfs_force_shutdown(bp->b_target->bt_mount,
SHUTDOWN_META_IO_ERROR);
}
}
/*
* On v5 supers, a bli could be attached to update the metadata LSN.
* Clean it up.
*/
if (bp->b_fspriv)
xfs_buf_item_relse(bp);
ASSERT(bp->b_fspriv == NULL);
bp->b_iodone = NULL;
xfs_buf_ioend(bp);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 43 | 51.19% | 5 | 50.00% |
| Brian Foster | 21 | 25.00% | 1 | 10.00% |
| Dave Chinner | 17 | 20.24% | 2 | 20.00% |
| Chandra Seetharaman | 2 | 2.38% | 1 | 10.00% |
| Nathan Scott | 1 | 1.19% | 1 | 10.00% |
| Total | 84 | 100.00% | 10 | 100.00% |
/*
* This routine finds (to an approximation) the first block in the physical
* log which contains the given cycle. It uses a binary search algorithm.
* Note that the algorithm can not be perfect because the disk will not
* necessarily be perfect.
*/
STATIC int
xlog_find_cycle_start(
struct xlog *log,
struct xfs_buf *bp,
xfs_daddr_t first_blk,
xfs_daddr_t *last_blk,
uint cycle)
{
char *offset;
xfs_daddr_t mid_blk;
xfs_daddr_t end_blk;
uint mid_cycle;
int error;
end_blk = *last_blk;
mid_blk = BLK_AVG(first_blk, end_blk);
while (mid_blk != first_blk && mid_blk != end_blk) {
error = xlog_bread(log, mid_blk, 1, bp, &offset);
if (error)
return error;
mid_cycle = xlog_get_cycle(offset);
if (mid_cycle == cycle)
end_blk = mid_blk; /* last_half_cycle == mid_cycle */
else
first_blk = mid_blk; /* first_half_cycle == mid_cycle */
mid_blk = BLK_AVG(first_blk, end_blk);
}
ASSERT((mid_blk == first_blk && mid_blk+1 == end_blk) ||
(mid_blk == end_blk && mid_blk-1 == first_blk));
*last_blk = end_blk;
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 129 | 81.13% | 4 | 50.00% |
| Alex Elder | 19 | 11.95% | 1 | 12.50% |
| Nathan Scott | 6 | 3.77% | 1 | 12.50% |
| Mark Tinguely | 4 | 2.52% | 1 | 12.50% |
| David Chinner | 1 | 0.63% | 1 | 12.50% |
| Total | 159 | 100.00% | 8 | 100.00% |
/*
* Check that a range of blocks does not contain stop_on_cycle_no.
* Fill in *new_blk with the block offset where such a block is
* found, or with -1 (an invalid block number) if there is no such
* block in the range. The scan needs to occur from front to back
* and the pointer into the region must be updated since a later
* routine will need to perform another test.
*/
STATIC int
xlog_find_verify_cycle(
struct xlog *log,
xfs_daddr_t start_blk,
int nbblks,
uint stop_on_cycle_no,
xfs_daddr_t *new_blk)
{
xfs_daddr_t i, j;
uint cycle;
xfs_buf_t *bp;
xfs_daddr_t bufblks;
char *buf = NULL;
int error = 0;
/*
* Greedily allocate a buffer big enough to handle the full
* range of basic blocks we'll be examining. If that fails,
* try a smaller size. We need to be able to read at least
* a log sector, or we're out of luck.
*/
bufblks = 1 << ffs(nbblks);
while (bufblks > log->l_logBBsize)
bufblks >>= 1;
while (!(bp = xlog_get_bp(log, bufblks))) {
bufblks >>= 1;
if (bufblks < log->l_sectBBsize)
return -ENOMEM;
}
for (i = start_blk; i < start_blk + nbblks; i += bufblks) {
int bcount;
bcount = min(bufblks, (start_blk + nbblks - i));
error = xlog_bread(log, i, bcount, bp, &buf);
if (error)
goto out;
for (j = 0; j < bcount; j++) {
cycle = xlog_get_cycle(buf);
if (cycle == stop_on_cycle_no) {
*new_blk = i+j;
goto out;
}
buf += BBSIZE;
}
}
*new_blk = -1;
out:
xlog_put_bp(bp);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 188 | 84.30% | 4 | 33.33% |
| Nathan Scott | 16 | 7.17% | 3 | 25.00% |
| Dave Chinner | 13 | 5.83% | 2 | 16.67% |
| Alex Elder | 4 | 1.79% | 2 | 16.67% |
| Mark Tinguely | 2 | 0.90% | 1 | 8.33% |
| Total | 223 | 100.00% | 12 | 100.00% |
/*
* Potentially backup over partial log record write.
*
* In the typical case, last_blk is the number of the block directly after
* a good log record. Therefore, we subtract one to get the block number
* of the last block in the given buffer. extra_bblks contains the number
* of blocks we would have read on a previous read. This happens when the
* last log record is split over the end of the physical log.
*
* extra_bblks is the number of blocks potentially verified on a previous
* call to this routine.
*/
STATIC int
xlog_find_verify_log_record(
struct xlog *log,
xfs_daddr_t start_blk,
xfs_daddr_t *last_blk,
int extra_bblks)
{
xfs_daddr_t i;
xfs_buf_t *bp;
char *offset = NULL;
xlog_rec_header_t *head = NULL;
int error = 0;
int smallmem = 0;
int num_blks = *last_blk - start_blk;
int xhdrs;
ASSERT(start_blk != 0 || *last_blk != start_blk);
if (!(bp = xlog_get_bp(log, num_blks))) {
if (!(bp = xlog_get_bp(log, 1)))
return -ENOMEM;
smallmem = 1;
} else {
error = xlog_bread(log, start_blk, num_blks, bp, &offset);
if (error)
goto out;
offset += ((num_blks - 1) << BBSHIFT);
}
for (i = (*last_blk) - 1; i >= 0; i--) {
if (i < start_blk) {
/* valid log record not found */
xfs_warn(log->l_mp,
"Log inconsistent (didn't find previous header)");
ASSERT(0);
error = -EIO;
goto out;
}
if (smallmem) {
error = xlog_bread(log, i, 1, bp, &offset);
if (error)
goto out;
}
head = (xlog_rec_header_t *)offset;
if (head->h_magicno == cpu_to_be32(XLOG_HEADER_MAGIC_NUM))
break;
if (!smallmem)
offset -= BBSIZE;
}
/*
* We hit the beginning of the physical log & still no header. Return
* to caller. If caller can handle a return of -1, then this routine
* will be called again for the end of the physical log.
*/
if (i == -1) {
error = 1;
goto out;
}
/*
* We have the final block of the good log (the first block
* of the log record _before_ the head. So we check the uuid.
*/
if ((error = xlog_header_check_mount(log->l_mp, head)))
goto out;
/*
* We may have found a log record header before we expected one.
* last_blk will be the 1st block # with a given cycle #. We may end
* up reading an entire log record. In this case, we don't want to
* reset last_blk. Only when last_blk points in the middle of a log
* record do we update last_blk.
*/
if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
uint h_size = be32_to_cpu(head->h_size);
xhdrs = h_size / XLOG_HEADER_CYCLE_SIZE;
if (h_size % XLOG_HEADER_CYCLE_SIZE)
xhdrs++;
} else {
xhdrs = 1;
}
if (*last_blk - i + extra_bblks !=
BTOBB(be32_to_cpu(head->h_len)) + xhdrs)
*last_blk = i;
out:
xlog_put_bp(bp);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 344 | 91.25% | 5 | 38.46% |
| Nathan Scott | 22 | 5.84% | 4 | 30.77% |
| Dave Chinner | 8 | 2.12% | 2 | 15.38% |
| Mark Tinguely | 2 | 0.53% | 1 | 7.69% |
| Eric Sandeen | 1 | 0.27% | 1 | 7.69% |
| Total | 377 | 100.00% | 13 | 100.00% |
/*
* Head is defined to be the point of the log where the next log write
* could go. This means that incomplete LR writes at the end are
* eliminated when calculating the head. We aren't guaranteed that previous
* LR have complete transactions. We only know that a cycle number of
* current cycle number -1 won't be present in the log if we start writing
* from our current block number.
*
* last_blk contains the block number of the first block with a given
* cycle number.
*
* Return: zero if normal, non-zero if error.
*/
STATIC int
xlog_find_head(
struct xlog *log,
xfs_daddr_t *return_head_blk)
{
xfs_buf_t *bp;
char *offset;
xfs_daddr_t new_blk, first_blk, start_blk, last_blk, head_blk;
int num_scan_bblks;
uint first_half_cycle, last_half_cycle;
uint stop_on_cycle;
int error, log_bbnum = log->l_logBBsize;
/* Is the end of the log device zeroed? */
error = xlog_find_zeroed(log, &first_blk);
if (error < 0) {
xfs_warn(log->l_mp, "empty log check failed");
return error;
}
if (error == 1) {
*return_head_blk = first_blk;
/* Is the whole lot zeroed? */
if (!first_blk) {
/* Linux XFS shouldn't generate totally zeroed logs -
* mkfs etc write a dummy unmount record to a fresh
* log so we can store the uuid in there
*/
xfs_warn(log->l_mp, "totally zeroed log");
}
return 0;
}
first_blk = 0; /* get cycle # of 1st block */
bp = xlog_get_bp(log, 1);
if (!bp)
return -ENOMEM;
error = xlog_bread(log, 0, 1, bp, &offset);
if (error)
goto bp_err;
first_half_cycle = xlog_get_cycle(offset);
last_blk = head_blk = log_bbnum - 1; /* get cycle # of last block */
error = xlog_bread(log, last_blk, 1, bp, &offset);
if (error)
goto bp_err;
last_half_cycle = xlog_get_cycle(offset);
ASSERT(last_half_cycle != 0);
/*
* If the 1st half cycle number is equal to the last half cycle number,
* then the entire log is stamped with the same cycle number. In this
* case, head_blk can't be set to zero (which makes sense). The below
* math doesn't work out properly with head_blk equal to zero. Instead,
* we set it to log_bbnum which is an invalid block number, but this
* value makes the math correct. If head_blk doesn't changed through
* all the tests below, *head_blk is set to zero at the very end rather
* than log_bbnum. In a sense, log_bbnum and zero are the same block
* in a circular file.
*/
if (first_half_cycle == last_half_cycle) {
/*
* In this case we believe that the entire log should have
* cycle number last_half_cycle. We need to scan backwards
* from the end verifying that there are no holes still
* containing last_half_cycle - 1. If we find such a hole,
* then the start of that hole will be the new head. The
* simple case looks like
* x | x ... | x - 1 | x
* Another case that fits this picture would be
* x | x + 1 | x ... | x
* In this case the head really is somewhere at the end of the
* log, as one of the latest writes at the beginning was
* incomplete.
* One more case is
* x | x + 1 | x ... | x - 1 | x
* This is really the combination of the above two cases, and
* the head has to end up at the start of the x-1 hole at the
* end of the log.
*
* In the 256k log case, we will read from the beginning to the
* end of the log and search for cycle numbers equal to x-1.
* We don't worry about the x+1 blocks that we encounter,
* because we know that they cannot be the head since the log
* started with x.
*/
head_blk = log_bbnum;
stop_on_cycle = last_half_cycle - 1;
} else {
/*
* In this case we want to find the first block with cycle
* number matching last_half_cycle. We expect the log to be
* some variation on
* x + 1 ... | x ... | x
* The first block with cycle number x (last_half_cycle) will
* be where the new head belongs. First we do a binary search
* for the first occurrence of last_half_cycle. The binary
* search may not be totally accurate, so then we scan back
* from there looking for occurrences of last_half_cycle before
* us. If that backwards scan wraps around the beginning of
* the log, then we look for occurrences of last_half_cycle - 1
* at the end of the log. The cases we're looking for look
* like
* v binary search stopped here
* x + 1 ... | x | x + 1 | x ... | x
* ^ but we want to locate this spot
* or
* <---------> less than scan distance
* x + 1 ... | x ... | x - 1 | x
* ^ we want to locate this spot
*/
stop_on_cycle = last_half_cycle;
if ((error = xlog_find_cycle_start(log, bp, first_blk,
&head_blk, last_half_cycle)))
goto bp_err;
}
/*
* Now validate the answer. Scan back some number of maximum possible
* blocks and make sure each one has the expected cycle number. The
* maximum is determined by the total possible amount of buffering
* in the in-core log. The following number can be made tighter if
* we actually look at the block size of the filesystem.
*/
num_scan_bblks = XLOG_TOTAL_REC_SHIFT(log);
if (head_blk >= num_scan_bblks) {
/*
* We are guaranteed that the entire check can be performed
* in one buffer.
*/
start_blk = head_blk - num_scan_bblks;
if ((error = xlog_find_verify_cycle(log,
start_blk, num_scan_bblks,
stop_on_cycle, &new_blk)))
goto bp_err;
if (new_blk != -1)
head_blk = new_blk;
} else { /* need to read 2 parts of log */
/*
* We are going to scan backwards in the log in two parts.
* First we scan the physical end of the log. In this part
* of the log, we are looking for blocks with cycle number
* last_half_cycle - 1.
* If we find one, then we know that the log starts there, as
* we've found a hole that didn't get written in going around
* the end of the physical log. The simple case for this is
* x + 1 ... | x ... | x - 1 | x
* <---------> less than scan distance
* If all of the blocks at the end of the log have cycle number
* last_half_cycle, then we check the blocks at the start of
* the log looking for occurrences of last_half_cycle. If we
* find one, then our current estimate for the location of the
* first occurrence of last_half_cycle is wrong and we move
* back to the hole we've found. This case looks like
* x + 1 ... | x | x + 1 | x ...
* ^ binary search stopped here
* Another case we need to handle that only occurs in 256k
* logs is
* x + 1 ... | x ... | x+1 | x ...
* ^ binary search stops here
* In a 256k log, the scan at the end of the log will see the
* x + 1 blocks. We need to skip past those since that is
* certainly not the head of the log. By searching for
* last_half_cycle-1 we accomplish that.
*/
ASSERT(head_blk <= INT_MAX &&
(xfs_daddr_t) num_scan_bblks >= head_blk);
start_blk = log_bbnum - (num_scan_bblks - head_blk);
if ((error = xlog_find_verify_cycle(log, start_blk,
num_scan_bblks - (int)head_blk,
(stop_on_cycle - 1), &new_blk)))
goto bp_err;
if (new_blk != -1) {
head_blk = new_blk;
goto validate_head;
}
/*
* Scan beginning of log now. The last part of the physical
* log is good. This scan needs to verify that it doesn't find
* the last_half_cycle.
*/
start_blk = 0;
ASSERT(head_blk <= INT_MAX);
if ((error = xlog_find_verify_cycle(log,
start_blk, (int)head_blk,
stop_on_cycle, &new_blk)))
goto bp_err;
if (new_blk != -1)
head_blk = new_blk;
}
validate_head:
/*
* Now we need to make sure head_blk is not pointing to a block in
* the middle of a log record.
*/
num_scan_bblks = XLOG_REC_SHIFT(log);
if (head_blk >= num_scan_bblks) {
start_blk = head_blk - num_scan_bblks; /* don't read head_blk */
/* start ptr at last block ptr before head_blk */
error = xlog_find_verify_log_record(log, start_blk, &head_blk, 0);
if (error == 1)
error = -EIO;
if (error)
goto bp_err;
} else {
start_blk = 0;
ASSERT(head_blk <= INT_MAX);
error = xlog_find_verify_log_record(log, start_blk, &head_blk, 0);
if (error < 0)
goto bp_err;
if (error == 1) {
/* We hit the beginning of the log during our search */
start_blk = log_bbnum - (num_scan_bblks - head_blk);
new_blk = log_bbnum;
ASSERT(start_blk <= INT_MAX &&
(xfs_daddr_t) log_bbnum-start_blk >= 0);
ASSERT(head_blk <= INT_MAX);
error = xlog_find_verify_log_record(log, start_blk,
&new_blk, (int)head_blk);
if (error == 1)
error = -EIO;
if (error)
goto bp_err;
if (new_blk != log_bbnum)
head_blk = new_blk;
} else if (error)
goto bp_err;
}
xlog_put_bp(bp);
if (head_blk == log_bbnum)
*return_head_blk = 0;
else
*return_head_blk = head_blk;
/*
* When returning here, we have a good block number. Bad block
* means that during a previous crash, we didn't have a clean break
* from cycle number N to cycle number N-1. In this case, we need
* to find the first block with cycle number N-1.
*/
return 0;
bp_err:
xlog_put_bp(bp);
if (error)
xfs_warn(log->l_mp, "failed to find log head");
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 591 | 85.04% | 5 | 33.33% |
| Dave Chinner | 63 | 9.06% | 2 | 13.33% |
| Nathan Scott | 22 | 3.17% | 5 | 33.33% |
| Alex Elder | 17 | 2.45% | 2 | 13.33% |
| Mark Tinguely | 2 | 0.29% | 1 | 6.67% |
| Total | 695 | 100.00% | 15 | 100.00% |
/*
* Seek backwards in the log for log record headers.
*
* Given a starting log block, walk backwards until we find the provided number
* of records or hit the provided tail block. The return value is the number of
* records encountered or a negative error code. The log block and buffer
* pointer of the last record seen are returned in rblk and rhead respectively.
*/
STATIC int
xlog_rseek_logrec_hdr(
struct xlog *log,
xfs_daddr_t head_blk,
xfs_daddr_t tail_blk,
int count,
struct xfs_buf *bp,
xfs_daddr_t *rblk,
struct xlog_rec_header **rhead,
bool *wrapped)
{
int i;
int error;
int found = 0;
char *offset = NULL;
xfs_daddr_t end_blk;
*wrapped = false;
/*
* Walk backwards from the head block until we hit the tail or the first
* block in the log.
*/
end_blk = head_blk > tail_blk ? tail_blk : 0;
for (i = (int) head_blk - 1; i >= end_blk; i--) {
error = xlog_bread(log, i, 1, bp, &offset);
if (error)
goto out_error;
if (*(__be32 *) offset == cpu_to_be32(XLOG_HEADER_MAGIC_NUM)) {
*rblk = i;
*rhead = (struct xlog_rec_header *) offset;
if (++found == count)
break;
}
}
/*
* If we haven't hit the tail block or the log record header count,
* start looking again from the end of the physical log. Note that
* callers can pass head == tail if the tail is not yet known.
*/
if (tail_blk >= head_blk && found != count) {
for (i = log->l_logBBsize - 1; i >= (int) tail_blk; i--) {
error = xlog_bread(log, i, 1, bp, &offset);
if (error)
goto out_error;
if (*(__be32 *)offset ==
cpu_to_be32(XLOG_HEADER_MAGIC_NUM)) {
*wrapped = true;
*rblk = i;
*rhead = (struct xlog_rec_header *) offset;
if (++found == count)
break;
}
}
}
return found;
out_error:
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Brian Foster | 267 | 100.00% | 1 | 100.00% |
| Total | 267 | 100.00% | 1 | 100.00% |
/*
* Seek forward in the log for log record headers.
*
* Given head and tail blocks, walk forward from the tail block until we find
* the provided number of records or hit the head block. The return value is the
* number of records encountered or a negative error code. The log block and
* buffer pointer of the last record seen are returned in rblk and rhead
* respectively.
*/
STATIC int
xlog_seek_logrec_hdr(
struct xlog *log,
xfs_daddr_t head_blk,
xfs_daddr_t tail_blk,
int count,
struct xfs_buf *bp,
xfs_daddr_t *rblk,
struct xlog_rec_header **rhead,
bool *wrapped)
{
int i;
int error;
int found = 0;
char *offset = NULL;
xfs_daddr_t end_blk;
*wrapped = false;
/*
* Walk forward from the tail block until we hit the head or the last
* block in the log.
*/
end_blk = head_blk > tail_blk ? head_blk : log->l_logBBsize - 1;
for (i = (int) tail_blk; i <= end_blk; i++) {
error = xlog_bread(log, i, 1, bp, &offset);
if (error)
goto out_error;
if (*(__be32 *) offset == cpu_to_be32(XLOG_HEADER_MAGIC_NUM)) {
*rblk = i;
*rhead = (struct xlog_rec_header *) offset;
if (++found == count)
break;
}
}
/*
* If we haven't hit the head block or the log record header count,
* start looking again from the start of the physical log.
*/
if (tail_blk > head_blk && found != count) {
for (i = 0; i < (int) head_blk; i++) {
error = xlog_bread(log, i, 1, bp, &offset);
if (error)
goto out_error;
if (*(__be32 *)offset ==
cpu_to_be32(XLOG_HEADER_MAGIC_NUM)) {
*wrapped = true;
*rblk = i;
*rhead = (struct xlog_rec_header *) offset;
if (++found == count)
break;
}
}
}
return found;
out_error:
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Brian Foster | 185 | 69.81% | 2 | 25.00% |
| Christoph Hellwig | 75 | 28.30% | 3 | 37.50% |
| Nathan Scott | 2 | 0.75% | 1 | 12.50% |
| Mark Tinguely | 2 | 0.75% | 1 | 12.50% |
| Eric Sandeen | 1 | 0.38% | 1 | 12.50% |
| Total | 265 | 100.00% | 8 | 100.00% |
/*
* Check the log tail for torn writes. This is required when torn writes are
* detected at the head and the head had to be walked back to a previous record.
* The tail of the previous record must now be verified to ensure the torn
* writes didn't corrupt the previous tail.
*
* Return an error if CRC verification fails as recovery cannot proceed.
*/
STATIC int
xlog_verify_tail(
struct xlog *log,
xfs_daddr_t head_blk,
xfs_daddr_t tail_blk)
{
struct xlog_rec_header *thead;
struct xfs_buf *bp;
xfs_daddr_t first_bad;
int count;
int error = 0;
bool wrapped;
xfs_daddr_t tmp_head;
bp = xlog_get_bp(log, 1);
if (!bp)
return -ENOMEM;
/*
* Seek XLOG_MAX_ICLOGS + 1 records past the current tail record to get
* a temporary head block that points after the last possible
* concurrently written record of the tail.
*/
count = xlog_seek_logrec_hdr(log, head_blk, tail_blk,
XLOG_MAX_ICLOGS + 1, bp, &tmp_head, &thead,
&wrapped);
if (count < 0) {
error = count;
goto out;
}
/*
* If the call above didn't find XLOG_MAX_ICLOGS + 1 records, we ran
* into the actual log head. tmp_head points to the start of the record
* so update it to the actual head block.
*/
if (count < XLOG_MAX_ICLOGS + 1)
tmp_head = head_blk;
/*
* We now have a tail and temporary head block that covers at least
* XLOG_MAX_ICLOGS records from the tail. We need to verify that these
* records were completely written. Run a CRC verification pass from
* tail to head and return the result.
*/
error = xlog_do_recovery_pass(log, tmp_head, tail_blk,
XLOG_RECOVER_CRCPASS, &first_bad);
out:
xlog_put_bp(bp);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Brian Foster | 144 | 100.00% | 1 | 100.00% |
| Total | 144 | 100.00% | 1 | 100.00% |
/*
* Detect and trim torn writes from the head of the log.
*
* Storage without sector atomicity guarantees can result in torn writes in the
* log in the event of a crash. Our only means to detect this scenario is via
* CRC verification. While we can't always be certain that CRC verification
* failure is due to a torn write vs. an unrelated corruption, we do know that
* only a certain number (XLOG_MAX_ICLOGS) of log records can be written out at
* one time. Therefore, CRC verify up to XLOG_MAX_ICLOGS records at the head of
* the log and treat failures in this range as torn writes as a matter of
* policy. In the event of CRC failure, the head is walked back to the last good
* record in the log and the tail is updated from that record and verified.
*/
STATIC int
xlog_verify_head(
struct xlog *log,
xfs_daddr_t *head_blk, /* in/out: unverified head */
xfs_daddr_t *tail_blk, /* out: tail block */
struct xfs_buf *bp,
xfs_daddr_t *rhead_blk, /* start blk of last record */
struct xlog_rec_header **rhead, /* ptr to last record */
bool *wrapped) /* last rec. wraps phys. log */
{
struct xlog_rec_header *tmp_rhead;
struct xfs_buf *tmp_bp;
xfs_daddr_t first_bad;
xfs_daddr_t tmp_rhead_blk;
int found;
int error;
bool tmp_wrapped;
/*
* Check the head of the log for torn writes. Search backwards from the
* head until we hit the tail or the maximum number of log record I/Os
* that could have been in flight at one time. Use a temporary buffer so
* we don't trash the rhead/bp pointers from the caller.
*/
tmp_bp = xlog_get_bp(log, 1);
if (!tmp_bp)
return -ENOMEM;
error = xlog_rseek_logrec_hdr(log, *head_blk, *tail_blk,
XLOG_MAX_ICLOGS, tmp_bp, &tmp_rhead_blk,
&tmp_rhead, &tmp_wrapped);
xlog_put_bp(tmp_bp);
if (error < 0)
return error;
/*
* Now run a CRC verification pass over the records starting at the
* block found above to the current head. If a CRC failure occurs, the
* log block of the first bad record is saved in first_bad.
*/
error = xlog_do_recovery_pass(log, *head_blk, tmp_rhead_blk,
XLOG_RECOVER_CRCPASS, &first_bad);
if (error == -EFSBADCRC) {
/*
* We've hit a potential torn write. Reset the error and warn
* about it.
*/
error = 0;
xfs_warn(log->l_mp,
"Torn write (CRC failure) detected at log block 0x%llx. Truncating head block from 0x%llx.",
first_bad, *head_blk);
/*
* Get the header block and buffer pointer for the last good
* record before the bad record.
*
* Note that xlog_find_tail() clears the blocks at the new head
* (i.e., the records with invalid CRC) if the cycle number
* matches the the current cycle.
*/
found = xlog_rseek_logrec_hdr(log, first_bad, *tail_blk, 1, bp,
rhead_blk, rhead, wrapped);
if (found < 0)
return found;
if (found == 0) /* XXX: right thing to do here? */
return -EIO;
/*
* Reset the head block to the starting block of the first bad
* log record and set the tail block based on the last good
* record.
*
* Bail out if the updated head/tail match as this indicates
* possible corruption outside of the acceptable
* (XLOG_MAX_ICLOGS) range. This is a job for xfs_repair...
*/
*head_blk = first_bad;
*tail_blk = BLOCK_LSN(be64_to_cpu((*rhead)->h_tail_lsn));
if (*head_blk == *tail_blk) {
ASSERT(0);
return 0;
}
/*
* Now verify the tail based on the updated head. This is
* required because the torn writes trimmed from the head could
* have been written over the tail of a previous record. Return
* any errors since recovery cannot proceed if the tail is
* corrupt.
*
* XXX: This leaves a gap in truly robust protection from torn
* writes in the log. If the head is behind the tail, the tail
* pushes forward to create some space and then a crash occurs
* causing the writes into the previous record's tail region to
* tear, log recovery isn't able to recover.
*
* How likely is this to occur? If possible, can we do something
* more intelligent here? Is it safe to push the tail forward if
* we can determine that the tail is within the range of the
* torn write (e.g., the kernel can only overwrite the tail if
* it has actually been pushed forward)? Alternatively, could we
* somehow prevent this condition at runtime?
*/
error = xlog_verify_tail(log, *head_blk, *tail_blk);
}
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Brian Foster | 263 | 96.34% | 2 | 50.00% |
| Christoph Hellwig | 7 | 2.56% | 1 | 25.00% |
| Dave Chinner | 3 | 1.10% | 1 | 25.00% |
| Total | 273 | 100.00% | 4 | 100.00% |
/*
* Check whether the head of the log points to an unmount record. In other
* words, determine whether the log is clean. If so, update the in-core state
* appropriately.
*/
static int
xlog_check_unmount_rec(
struct xlog *log,
xfs_daddr_t *head_blk,
xfs_daddr_t *tail_blk,
struct xlog_rec_header *rhead,
xfs_daddr_t rhead_blk,
struct xfs_buf *bp,
bool *clean)
{
struct xlog_op_header *op_head;
xfs_daddr_t umount_data_blk;
xfs_daddr_t after_umount_blk;
int hblks;
int error;
char *offset;
*clean = false;
/*
* Look for unmount record. If we find it, then we know there was a
* clean unmount. Since 'i' could be the last block in the physical
* log, we convert to a log block before comparing to the head_blk.
*
* Save the current tail lsn to use to pass to xlog_clear_stale_blocks()
* below. We won't want to clear the unmount record if there is one, so
* we pass the lsn of the unmount record rather than the block after it.
*/
if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
int h_size = be32_to_cpu(rhead->h_size);
int h_version = be32_to_cpu(rhead->h_version);
if ((h_version & XLOG_VERSION_2) &&
(h_size > XLOG_HEADER_CYCLE_SIZE)) {
hblks = h_size / XLOG_HEADER_CYCLE_SIZE;
if (h_size % XLOG_HEADER_CYCLE_SIZE)
hblks++;
} else {
hblks = 1;
}
} else {
hblks = 1;
}
after_umount_blk = rhead_blk + hblks + BTOBB(be32_to_cpu(rhead->h_len));
after_umount_blk = do_mod(after_umount_blk, log->l_logBBsize);
if (*head_blk == after_umount_blk &&
be32_to_cpu(rhead->h_num_logops) == 1) {
umount_data_blk = rhead_blk + hblks;
umount_data_blk = do_mod(umount_data_blk, log->l_logBBsize);
error = xlog_bread(log, umount_data_blk, 1, bp, &offset);
if (error)
return error;
op_head = (struct xlog_op_header *)offset;
if (op_head->oh_flags & XLOG_UNMOUNT_TRANS) {
/*
* Set tail and last sync so that newly written log
* records will point recovery to after the current
* unmount record.
*/
xlog_assign_atomic_lsn(&log->l_tail_lsn,
log->l_curr_cycle, after_umount_blk);
xlog_assign_atomic_lsn(&log->l_last_sync_lsn,
log->l_curr_cycle, after_umount_blk);
*tail_blk = after_umount_blk;
*clean = true;
}
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Brian Foster | 165 | 57.29% | 2 | 20.00% |
| Christoph Hellwig | 112 | 38.89% | 3 | 30.00% |
| Dave Chinner | 8 | 2.78% | 2 | 20.00% |
| David Chinner | 1 | 0.35% | 1 | 10.00% |
| Eric Sandeen | 1 | 0.35% | 1 | 10.00% |
| Nathan Scott | 1 | 0.35% | 1 | 10.00% |
| Total | 288 | 100.00% | 10 | 100.00% |
static void
xlog_set_state(
struct xlog *log,
xfs_daddr_t head_blk,
struct xlog_rec_header *rhead,
xfs_daddr_t rhead_blk,
bool bump_cycle)
{
/*
* Reset log values according to the state of the log when we
* crashed. In the case where head_blk == 0, we bump curr_cycle
* one because the next write starts a new cycle rather than
* continuing the cycle of the last good log record. At this
* point we have guaranteed that all partial log records have been
* accounted for. Therefore, we know that the last good log record
* written was complete and ended exactly on the end boundary
* of the physical log.
*/
log->l_prev_block = rhead_blk;
log->l_curr_block = (int)head_blk;
log->l_curr_cycle = be32_to_cpu(rhead->h_cycle);
if (bump_cycle)
log->l_curr_cycle++;
atomic64_set(&log->l_tail_lsn, be64_to_cpu(rhead->h_tail_lsn));
atomic64_set(&log->l_last_sync_lsn, be64_to_cpu(rhead->h_lsn));
xlog_assign_grant_head(&log->l_reserve_head.grant, log->l_curr_cycle,
BBTOB(log->l_curr_block));
xlog_assign_grant_head(&log->l_write_head.grant, log->l_curr_cycle,
BBTOB(log->l_curr_block));
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Brian Foster | 133 | 100.00% | 1 | 100.00% |
| Total | 133 | 100.00% | 1 | 100.00% |
/*
* Find the sync block number or the tail of the log.
*
* This will be the block number of the last record to have its
* associated buffers synced to disk. Every log record header has
* a sync lsn embedded in it. LSNs hold block numbers, so it is easy
* to get a sync block number. The only concern is to figure out which
* log record header to believe.
*
* The following algorithm uses the log record header with the largest
* lsn. The entire log record does not need to be valid. We only care
* that the header is valid.
*
* We could speed up search by using current head_blk buffer, but it is not
* available.
*/
STATIC int
xlog_find_tail(
struct xlog *log,
xfs_daddr_t *head_blk,
xfs_daddr_t *tail_blk)
{
xlog_rec_header_t *rhead;
char *offset = NULL;
xfs_buf_t *bp;
int error;
xfs_daddr_t rhead_blk;
xfs_lsn_t tail_lsn;
bool wrapped = false;
bool clean = false;
/*
* Find previous log record
*/
if ((error = xlog_find_head(log, head_blk)))
return error;
ASSERT(*head_blk < INT_MAX);
bp = xlog_get_bp(log, 1);
if (!bp)
return -ENOMEM;
if (*head_blk == 0) { /* special case */
error = xlog_bread(log, 0, 1, bp, &offset);
if (error)
goto done;
if (xlog_get_cycle(offset) == 0) {
*tail_blk = 0;
/* leave all other log inited values alone */
goto done;
}
}
/*
* Search backwards through the log looking for the log record header
* block. This wraps all the way back around to the head so something is
* seriously wrong if we can't find it.
*/
error = xlog_rseek_logrec_hdr(log, *head_blk, *head_blk, 1, bp,
&rhead_blk, &rhead, &wrapped);
if (error < 0)
return error;
if (!error) {
xfs_warn(log->l_mp, "%s: couldn't find sync record", __func__);
return -EIO;
}
*tail_blk = BLOCK_LSN(be64_to_cpu(rhead->h_tail_lsn));
/*
* Set the log state based on the current head record.
*/
xlog_set_state(log, *head_blk, rhead, rhead_blk, wrapped);
tail_lsn = atomic64_read(&log->l_tail_lsn);
/*
* Look for an unmount record at the head of the log. This sets the log
* state to determine whether recovery is necessary.
*/
error = xlog_check_unmount_rec(log, head_blk, tail_blk, rhead,
rhead_blk, bp, &clean);
if (error)
goto done;
/*
* Verify the log head if the log is not clean (e.g., we have anything
* but an unmount record at the head). This uses CRC verification to
* detect and trim torn writes. If discovered, CRC failures are
* considered torn writes and the log head is trimmed accordingly.
*
* Note that we can only run CRC verification when the log is dirty
* because there's no guarantee that the log data behind an unmount
* record is compatible with the current architecture.
*/
if (!clean) {
xfs_daddr_t orig_head = *head_blk;
error = xlog_verify_head(log, head_blk, tail_blk, bp,
&rhead_blk, &rhead, &wrapped);
if (error)
goto done;
/* update in-core state again if the head changed */
if (*head_blk != orig_head) {
xlog_set_state(log, *head_blk, rhead, rhead_blk,
wrapped);
tail_lsn = atomic64_read(&log->l_tail_lsn);
error = xlog_check_unmount_rec(log, head_blk, tail_blk,
rhead, rhead_blk, bp,
&clean);
if (error)
goto done;
}
}
/*
* Note that the unmount was clean. If the unmount was not clean, we
* need to know this to rebuild the superblock counters from the perag
* headers if we have a filesystem using non-persistent counters.
*/
if (clean)
log->l_mp->m_flags |= XFS_MOUNT_WAS_CLEAN;
/*
* Make sure that there are no blocks in front of the head
* with the same cycle number as the head. This can happen
* because we allow multiple outstanding log writes concurrently,
* and the later writes might make it out before earlier ones.
*
* We use the lsn from before modifying it so that we'll never
* overwrite the unmount record after a clean unmount.
*
* Do this only if we are going to recover the filesystem
*
* NOTE: This used to say "if (!readonly)"
* However on Linux, we can & do recover a read-only filesystem.
* We only skip recovery if NORECOVERY is specified on mount,
* in which case we would not be here.
*
* But... if the -device- itself is readonly, just skip this.
* We can't recover this device anyway, so it won't matter.
*/
if (!xfs_readonly_buftarg(log->l_mp->m_logdev_targp))
error = xlog_clear_stale_blocks(log, tail_lsn);
done:
xlog_put_bp(bp);
if (error)
xfs_warn(log->l_mp, "failed to locate log tail");
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Brian Foster | 323 | 74.42% | 5 | 27.78% |
| Christoph Hellwig | 74 | 17.05% | 3 | 16.67% |
| Dave Chinner | 16 | 3.69% | 5 | 27.78% |
| Eric Sandeen | 10 | 2.30% | 2 | 11.11% |
| David Chinner | 8 | 1.84% | 1 | 5.56% |
| Alex Elder | 2 | 0.46% | 1 | 5.56% |
| Nathan Scott | 1 | 0.23% | 1 | 5.56% |
| Total | 434 | 100.00% | 18 | 100.00% |
/*
* Is the log zeroed at all?
*
* The last binary search should be changed to perform an X block read
* once X becomes small enough. You can then search linearly through
* the X blocks. This will cut down on the number of reads we need to do.
*
* If the log is partially zeroed, this routine will pass back the blkno
* of the first block with cycle number 0. It won't have a complete LR
* preceding it.
*
* Return:
* 0 => the log is completely written to
* 1 => use *blk_no as the first block of the log
* <0 => error has occurred
*/
STATIC int
xlog_find_zeroed(
struct xlog *log,
xfs_daddr_t *blk_no)
{
xfs_buf_t *bp;
char *offset;
uint first_cycle, last_cycle;
xfs_daddr_t new_blk, last_blk, start_blk;
xfs_daddr_t num_scan_bblks;
int error, log_bbnum = log->l_logBBsize;
*blk_no = 0;
/* check totally zeroed log */
bp = xlog_get_bp(log, 1);
if (!bp)
return -ENOMEM;
error = xlog_bread(log, 0, 1, bp, &offset);
if (error)
goto bp_err;
first_cycle = xlog_get_cycle(offset);
if (first_cycle == 0) { /* completely zeroed log */
*blk_no = 0;
xlog_put_bp(bp);
return 1;
}
/* check partially zeroed log */
error = xlog_bread(log, log_bbnum-1, 1, bp, &offset);
if (error)
goto bp_err;
last_cycle = xlog_get_cycle(offset);
if (last_cycle != 0) { /* log completely written to */
xlog_put_bp(bp);
return 0;
} else if (first_cycle != 1) {
/*
* If the cycle of the last block is zero, the cycle of
* the first block must be 1. If it's not, maybe we're
* not looking at a log... Bail out.
*/
xfs_warn(log->l_mp,
"Log inconsistent or not a log (last==0, first!=1)");
error = -EINVAL;
goto bp_err;
}
/* we have a partially zeroed log */
last_blk = log_bbnum-1;
if ((error = xlog_find_cycle_start(log, bp, 0, &last_blk, 0)))
goto bp_err;
/*
* Validate the answer. Because there is no way to guarantee that
* the entire log is made up of log records which are the same size,
* we scan over the defined maximum blocks. At this point, the maximum
* is not chosen to mean anything special. XXXmiken
*/
num_scan_bblks = XLOG_TOTAL_REC_SHIFT(log);
ASSERT(num_scan_bblks <= INT_MAX);
if (last_blk < num_scan_bblks)
num_scan_bblks = last_blk;
start_blk = last_blk - num_scan_bblks;
/*
* We search for any instances of cycle number 0 that occur before
* our current estimate of the head. What we're trying to detect is
* 1 ... | 0 | 1 | 0...
* ^ binary search ends here
*/
if ((error = xlog_find_verify_cycle(log, start_blk,
(int)num_scan_bblks, 0, &new_blk)))
goto bp_err;
if (new_blk != -1)
last_blk = new_blk;
/*
* Potentially backup over partial log record write. We don't need
* to search the end of the log because we know it is zero.
*/
error = xlog_find_verify_log_record(log, start_blk, &last_blk, 0);
if (error == 1)
error = -EIO;
if (error)
goto bp_err;
*blk_no = last_blk;
bp_err:
xlog_put_bp(bp);
if (error)
return error;
return 1;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 304 | 85.88% | 4 | 33.33% |
| Nathan Scott | 26 | 7.34% | 2 | 16.67% |
| Dave Chinner | 13 | 3.67% | 2 | 16.67% |
| Eric Sandeen | 6 | 1.69% | 1 | 8.33% |
| Russell Cattelan | 2 | 0.56% | 1 | 8.33% |
| Mark Tinguely | 2 | 0.56% | 1 | 8.33% |
| David Chinner | 1 | 0.28% | 1 | 8.33% |
| Total | 354 | 100.00% | 12 | 100.00% |
/*
* These are simple subroutines used by xlog_clear_stale_blocks() below
* to initialize a buffer full of empty log record headers and write
* them into the log.
*/
STATIC void
xlog_add_record(
struct xlog *log,
char *buf,
int cycle,
int block,
int tail_cycle,
int tail_block)
{
xlog_rec_header_t *recp = (xlog_rec_header_t *)buf;
memset(buf, 0, BBSIZE);
recp->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM);
recp->h_cycle = cpu_to_be32(cycle);
recp->h_version = cpu_to_be32(
xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? 2 : 1);
recp->h_lsn = cpu_to_be64(xlog_assign_lsn(cycle, block));
recp->h_tail_lsn = cpu_to_be64(xlog_assign_lsn(tail_cycle, tail_block));
recp->h_fmt = cpu_to_be32(XLOG_FMT);
memcpy(&recp->h_fs_uuid, &log->l_mp->m_sb.sb_uuid, sizeof(uuid_t));
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 90 | 62.50% | 4 | 57.14% |
| Nathan Scott | 51 | 35.42% | 1 | 14.29% |
| Mark Tinguely | 2 | 1.39% | 1 | 14.29% |
| Eric Sandeen | 1 | 0.69% | 1 | 14.29% |
| Total | 144 | 100.00% | 7 | 100.00% |
STATIC int
xlog_write_log_records(
struct xlog *log,
int cycle,
int start_block,
int blocks,
int tail_cycle,
int tail_block)
{
char *offset;
xfs_buf_t *bp;
int balign, ealign;
int sectbb = log->l_sectBBsize;
int end_block = start_block + blocks;
int bufblks;
int error = 0;
int i, j = 0;
/*
* Greedily allocate a buffer big enough to handle the full
* range of basic blocks to be written. If that fails, try
* a smaller size. We need to be able to write at least a
* log sector, or we're out of luck.
*/
bufblks = 1 << ffs(blocks);
while (bufblks > log->l_logBBsize)
bufblks >>= 1;
while (!(bp = xlog_get_bp(log, bufblks))) {
bufblks >>= 1;
if (bufblks < sectbb)
return -ENOMEM;
}
/* We may need to do a read at the start to fill in part of
* the buffer in the starting sector not covered by the first
* write below.
*/
balign = round_down(start_block, sectbb);
if (balign != start_block) {
error = xlog_bread_noalign(log, start_block, 1, bp);
if (error)
goto out_put_bp;
j = start_block - balign;
}
for (i = start_block; i < end_block; i += bufblks) {
int bcount, endcount;
bcount = min(bufblks, end_block - start_block);
endcount = bcount - j;
/* We may need to do a read at the end to fill in part of
* the buffer in the final sector not covered by the write.
* If this is the same sector as the above read, skip it.
*/
ealign = round_down(end_block, sectbb);
if (j == 0 && (start_block + endcount > ealign)) {
offset = bp->b_addr + BBTOB(ealign - start_block);
error = xlog_bread_offset(log, ealign, sectbb,
bp, offset);
if (error)
break;
}
offset = xlog_align(log, start_block, endcount, bp);
for (; j < endcount; j++) {
xlog_add_record(log, offset, cycle, i+j,
tail_cycle, tail_block);
offset += BBSIZE;
}
error = xlog_bwrite(log, start_block, endcount, bp);
if (error)
break;
start_block += endcount;
j = 0;
}
out_put_bp:
xlog_put_bp(bp);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Nathan Scott | 219 | 63.85% | 1 | 7.69% |
| Christoph Hellwig | 87 | 25.36% | 3 | 23.08% |
| Dave Chinner | 15 | 4.37% | 3 | 23.08% |
| Alex Elder | 11 | 3.21% | 3 | 23.08% |
| David Chinner | 7 | 2.04% | 1 | 7.69% |
| Chandra Seetharaman | 2 | 0.58% | 1 | 7.69% |
| Mark Tinguely | 2 | 0.58% | 1 | 7.69% |
| Total | 343 | 100.00% | 13 | 100.00% |
/*
* This routine is called to blow away any incomplete log writes out
* in front of the log head. We do this so that we won't become confused
* if we come up, write only a little bit more, and then crash again.
* If we leave the partial log records out there, this situation could
* cause us to think those partial writes are valid blocks since they
* have the current cycle number. We get rid of them by overwriting them
* with empty log records with the old cycle number rather than the
* current one.
*
* The tail lsn is passed in rather than taken from
* the log so that we will not write over the unmount record after a
* clean unmount in a 512 block log. Doing so would leave the log without
* any valid log records in it until a new one was written. If we crashed
* during that time we would not be able to recover.
*/
STATIC int
xlog_clear_stale_blocks(
struct xlog *log,
xfs_lsn_t tail_lsn)
{
int tail_cycle, head_cycle;
int tail_block, head_block;
int tail_distance, max_distance;
int distance;
int error;
tail_cycle = CYCLE_LSN(tail_lsn);
tail_block = BLOCK_LSN(tail_lsn);
head_cycle = log->l_curr_cycle;
head_block = log->l_curr_block;
/*
* Figure out the distance between the new head of the log
* and the tail. We want to write over any blocks beyond the
* head that we may have written just before the crash, but
* we don't want to overwrite the tail of the log.
*/
if (head_cycle == tail_cycle) {
/*
* The tail is behind the head in the physical log,
* so the distance from the head to the tail is the
* distance from the head to the end of the log plus
* the distance from the beginning of the log to the
* tail.
*/
if (unlikely(head_block < tail_block || head_block >= log->l_logBBsize)) {
XFS_ERROR_REPORT("xlog_clear_stale_blocks(1)",
XFS_ERRLEVEL_LOW, log->l_mp);
return -EFSCORRUPTED;
}
tail_distance = tail_block + (log->l_logBBsize - head_block);
} else {
/*
* The head is behind the tail in the physical log,
* so the distance from the head to the tail is just
* the tail block minus the head block.
*/
if (unlikely(head_block >= tail_block || head_cycle != (tail_cycle + 1))){
XFS_ERROR_REPORT("xlog_clear_stale_blocks(2)",
XFS_ERRLEVEL_LOW, log->l_mp);
return -EFSCORRUPTED;
}
tail_distance = tail_block - head_block;
}
/*
* If the head is right up against the tail, we can't clear
* anything.
*/
if (tail_distance <= 0) {
ASSERT(tail_distance == 0);
return 0;
}
max_distance = XLOG_TOTAL_REC_SHIFT(log);
/*
* Take the smaller of the maximum amount of outstanding I/O
* we could have and the distance to the tail to clear out.
* We take the smaller so that we don't overwrite the tail and
* we don't waste all day writing from the head to the tail
* for no reason.
*/
max_distance = MIN(max_distance, tail_distance);
if ((head_block + max_distance) <= log->l_logBBsize) {
/*
* We can stomp all the blocks we need to without
* wrapping around the end of the log. Just do it
* in a single write. Use the cycle number of the
* current cycle minus one so that the log will look like:
* n ... | n - 1 ...
*/
error = xlog_write_log_records(log, (head_cycle - 1),
head_block, max_distance, tail_cycle,
tail_block);
if (error)
return error;
} else {
/*
* We need to wrap around the end of the physical log in
* order to clear all the blocks. Do it in two separate
* I/Os. The first write should be from the head to the
* end of the physical log, and it should use the current
* cycle number minus one just like above.
*/
distance = log->l_logBBsize - head_block;
error = xlog_write_log_records(log, (head_cycle - 1),
head_block, distance, tail_cycle,
tail_block);
if (error)
return error;
/*
* Now write the blocks at the start of the physical log.
* This writes the remainder of the blocks we want to clear.
* It uses the current cycle number since we're now on the
* same cycle as the head so that we get:
* n ... n ... | n - 1 ...
* ^^^^^ blocks we're writing
*/
distance = max_distance - (log->l_logBBsize - head_block);
error = xlog_write_log_records(log, head_cycle, 0, distance,
tail_cycle, tail_block);
if (error)
return error;
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 278 | 87.42% | 1 | 16.67% |
| Glen Overby | 32 | 10.06% | 1 | 16.67% |
| Nathan Scott | 3 | 0.94% | 1 | 16.67% |
| Dave Chinner | 2 | 0.63% | 1 | 16.67% |
| Mark Tinguely | 2 | 0.63% | 1 | 16.67% |
| Russell Cattelan | 1 | 0.31% | 1 | 16.67% |
| Total | 318 | 100.00% | 6 | 100.00% |
/******************************************************************************
*
* Log recover routines
*
******************************************************************************
*/
/*
* Sort the log items in the transaction.
*
* The ordering constraints are defined by the inode allocation and unlink
* behaviour. The rules are:
*
* 1. Every item is only logged once in a given transaction. Hence it
* represents the last logged state of the item. Hence ordering is
* dependent on the order in which operations need to be performed so
* required initial conditions are always met.
*
* 2. Cancelled buffers are recorded in pass 1 in a separate table and
* there's nothing to replay from them so we can simply cull them
* from the transaction. However, we can't do that until after we've
* replayed all the other items because they may be dependent on the
* cancelled buffer and replaying the cancelled buffer can remove it
* form the cancelled buffer table. Hence they have tobe done last.
*
* 3. Inode allocation buffers must be replayed before inode items that
* read the buffer and replay changes into it. For filesystems using the
* ICREATE transactions, this means XFS_LI_ICREATE objects need to get
* treated the same as inode allocation buffers as they create and
* initialise the buffers directly.
*
* 4. Inode unlink buffers must be replayed after inode items are replayed.
* This ensures that inodes are completely flushed to the inode buffer
* in a "free" state before we remove the unlinked inode list pointer.
*
* Hence the ordering needs to be inode allocation buffers first, inode items
* second, inode unlink buffers third and cancelled buffers last.
*
* But there's a problem with that - we can't tell an inode allocation buffer
* apart from a regular buffer, so we can't separate them. We can, however,
* tell an inode unlink buffer from the others, and so we can separate them out
* from all the other buffers and move them to last.
*
* Hence, 4 lists, in order from head to tail:
* - buffer_list for all buffers except cancelled/inode unlink buffers
* - item_list for all non-buffer items
* - inode_buffer_list for inode unlink buffers
* - cancel_list for the cancelled buffers
*
* Note that we add objects to the tail of the lists so that first-to-last
* ordering is preserved within the lists. Adding objects to the head of the
* list means when we traverse from the head we walk them in last-to-first
* order. For cancelled buffers and inode unlink buffers this doesn't matter,
* but for all other items there may be specific ordering that we need to
* preserve.
*/
STATIC int
xlog_recover_reorder_trans(
struct xlog *log,
struct xlog_recover *trans,
int pass)
{
xlog_recover_item_t *item, *n;
int error = 0;
LIST_HEAD(sort_list);
LIST_HEAD(cancel_list);
LIST_HEAD(buffer_list);
LIST_HEAD(inode_buffer_list);
LIST_HEAD(inode_list);
list_splice_init(&trans->r_itemq, &sort_list);
list_for_each_entry_safe(item, n, &sort_list, ri_list) {
xfs_buf_log_format_t *buf_f = item->ri_buf[0].i_addr;
switch (ITEM_TYPE(item)) {
case XFS_LI_ICREATE:
list_move_tail(&item->ri_list, &buffer_list);
break;
case XFS_LI_BUF:
if (buf_f->blf_flags & XFS_BLF_CANCEL) {
trace_xfs_log_recover_item_reorder_head(log,
trans, item, pass);
list_move(&item->ri_list, &cancel_list);
break;
}
if (buf_f->blf_flags & XFS_BLF_INODE_BUF) {
list_move(&item->ri_list, &inode_buffer_list);
break;
}
list_move_tail(&item->ri_list, &buffer_list);
break;
case XFS_LI_INODE:
case XFS_LI_DQUOT:
case XFS_LI_QUOTAOFF:
case XFS_LI_EFD:
case XFS_LI_EFI:
case XFS_LI_RUI:
case XFS_LI_RUD:
case XFS_LI_CUI:
case XFS_LI_CUD:
case XFS_LI_BUI:
case XFS_LI_BUD:
trace_xfs_log_recover_item_reorder_tail(log,
trans, item, pass);
list_move_tail(&item->ri_list, &inode_list);
break;
default:
xfs_warn(log->l_mp,
"%s: unrecognized type of log operation",
__func__);
ASSERT(0);
/*
* return the remaining items back to the transaction
* item list so they can be freed in caller.
*/
if (!list_empty(&sort_list))
list_splice_init(&sort_list, &trans->r_itemq);
error = -EIO;
goto out;
}
}
out:
ASSERT(list_empty(&sort_list));
if (!list_empty(&buffer_list))
list_splice(&buffer_list, &trans->r_itemq);
if (!list_empty(&inode_list))
list_splice_tail(&inode_list, &trans->r_itemq);
if (!list_empty(&inode_buffer_list))
list_splice_tail(&inode_buffer_list, &trans->r_itemq);
if (!list_empty(&cancel_list))
list_splice_tail(&cancel_list, &trans->r_itemq);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 223 | 58.38% | 3 | 27.27% |
| Christoph Hellwig | 80 | 20.94% | 1 | 9.09% |
| David Chinner | 54 | 14.14% | 2 | 18.18% |
| Darrick J. Wong | 18 | 4.71% | 3 | 27.27% |
| Stephen Lord | 6 | 1.57% | 1 | 9.09% |
| Nathan Scott | 1 | 0.26% | 1 | 9.09% |
| Total | 382 | 100.00% | 11 | 100.00% |
/*
* Build up the table of buf cancel records so that we don't replay
* cancelled data in the second pass. For buffer records that are
* not cancel records, there is nothing to do here so we just return.
*
* If we get a cancel record which is already in the table, this indicates
* that the buffer was cancelled multiple times. In order to ensure
* that during pass 2 we keep the record in the table until we reach its
* last occurrence in the log, we keep a reference count in the cancel
* record in the table to tell us how many times we expect to see this
* record during the second pass.
*/
STATIC int
xlog_recover_buffer_pass1(
struct xlog *log,
struct xlog_recover_item *item)
{
xfs_buf_log_format_t *buf_f = item->ri_buf[0].i_addr;
struct list_head *bucket;
struct xfs_buf_cancel *bcp;
/*
* If this isn't a cancel buffer item, then just return.
*/
if (!(buf_f->blf_flags & XFS_BLF_CANCEL)) {
trace_xfs_log_recover_buf_not_cancel(log, buf_f);
return 0;
}
/*
* Insert an xfs_buf_cancel record into the hash table of them.
* If there is already an identical record, bump its reference count.
*/
bucket = XLOG_BUF_CANCEL_BUCKET(log, buf_f->blf_blkno);
list_for_each_entry(bcp, bucket, bc_list) {
if (bcp->bc_blkno == buf_f->blf_blkno &&
bcp->bc_len == buf_f->blf_len) {
bcp->bc_refcount++;
trace_xfs_log_recover_buf_cancel_ref_inc(log, buf_f);
return 0;
}
}
bcp = kmem_alloc(sizeof(struct xfs_buf_cancel), KM_SLEEP);
bcp->bc_blkno = buf_f->blf_blkno;
bcp->bc_len = buf_f->blf_len;
bcp->bc_refcount = 1;
list_add_tail(&bcp->bc_list, bucket);
trace_xfs_log_recover_buf_cancel_add(log, buf_f);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 99 | 56.57% | 3 | 27.27% |
| Christoph Hellwig | 43 | 24.57% | 2 | 18.18% |
| David Chinner | 19 | 10.86% | 1 | 9.09% |
| Stephen Lord | 8 | 4.57% | 1 | 9.09% |
| Mark Tinguely | 4 | 2.29% | 2 | 18.18% |
| Nathan Scott | 2 | 1.14% | 2 | 18.18% |
| Total | 175 | 100.00% | 11 | 100.00% |
/*
* Check to see whether the buffer being recovered has a corresponding
* entry in the buffer cancel record table. If it is, return the cancel
* buffer structure to the caller.
*/
STATIC struct xfs_buf_cancel *
xlog_peek_buffer_cancelled(
struct xlog *log,
xfs_daddr_t blkno,
uint len,
unsigned short flags)
{
struct list_head *bucket;
struct xfs_buf_cancel *bcp;
if (!log->l_buf_cancel_table) {
/* empty table means no cancelled buffers in the log */
ASSERT(!(flags & XFS_BLF_CANCEL));
return NULL;
}
bucket = XLOG_BUF_CANCEL_BUCKET(log, blkno);
list_for_each_entry(bcp, bucket, bc_list) {
if (bcp->bc_blkno == blkno && bcp->bc_len == len)
return bcp;
}
/*
* We didn't find a corresponding entry in the table, so return 0 so
* that the buffer is NOT cancelled.
*/
ASSERT(!(flags & XFS_BLF_CANCEL));
return NULL;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 68 | 64.15% | 4 | 36.36% |
| Christoph Hellwig | 16 | 15.09% | 2 | 18.18% |
| David Chinner | 14 | 13.21% | 1 | 9.09% |
| Stephen Lord | 4 | 3.77% | 1 | 9.09% |
| Mark Tinguely | 2 | 1.89% | 2 | 18.18% |
| Darrick J. Wong | 2 | 1.89% | 1 | 9.09% |
| Total | 106 | 100.00% | 11 | 100.00% |
/*
* If the buffer is being cancelled then return 1 so that it will be cancelled,
* otherwise return 0. If the buffer is actually a buffer cancel item
* (XFS_BLF_CANCEL is set), then decrement the refcount on the entry in the
* table and remove it from the table if this is the last reference.
*
* We remove the cancel record from the table when we encounter its last
* occurrence in the log so that if the same buffer is re-used again after its
* last cancellation we actually replay the changes made at that point.
*/
STATIC int
xlog_check_buffer_cancelled(
struct xlog *log,
xfs_daddr_t blkno,
uint len,
unsigned short flags)
{
struct xfs_buf_cancel *bcp;
bcp = xlog_peek_buffer_cancelled(log, blkno, len, flags);
if (!bcp)
return 0;
/*
* We've go a match, so return 1 so that the recovery of this buffer
* is cancelled. If this buffer is actually a buffer cancel log
* item, then decrement the refcount on the one in the table and
* remove it if this is the last reference.
*/
if (flags & XFS_BLF_CANCEL) {
if (--bcp->bc_refcount == 0) {
list_del(&bcp->bc_list);
kmem_free(bcp);
}
}
return 1;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 69 | 83.13% | 3 | 33.33% |
| Christoph Hellwig | 8 | 9.64% | 1 | 11.11% |
| Mark Tinguely | 2 | 2.41% | 2 | 22.22% |
| Darrick J. Wong | 2 | 2.41% | 1 | 11.11% |
| Stephen Lord | 1 | 1.20% | 1 | 11.11% |
| David Chinner | 1 | 1.20% | 1 | 11.11% |
| Total | 83 | 100.00% | 9 | 100.00% |
/*
* Perform recovery for a buffer full of inodes. In these buffers, the only
* data which should be recovered is that which corresponds to the
* di_next_unlinked pointers in the on disk inode structures. The rest of the
* data for the inodes is always logged through the inodes themselves rather
* than the inode buffer and is recovered in xlog_recover_inode_pass2().
*
* The only time when buffers full of inodes are fully recovered is when the
* buffer is full of newly allocated inodes. In this case the buffer will
* not be marked as an inode buffer and so will be sent to
* xlog_recover_do_reg_buffer() below during recovery.
*/
STATIC int
xlog_recover_do_inode_buffer(
struct xfs_mount *mp,
xlog_recover_item_t *item,
struct xfs_buf *bp,
xfs_buf_log_format_t *buf_f)
{
int i;
int item_index = 0;
int bit = 0;
int nbits = 0;
int reg_buf_offset = 0;
int reg_buf_bytes = 0;
int next_unlinked_offset;
int inodes_per_buf;
xfs_agino_t *logged_nextp;
xfs_agino_t *buffer_nextp;
trace_xfs_log_recover_buf_inode_buf(mp->m_log, buf_f);
/*
* Post recovery validation only works properly on CRC enabled
* filesystems.
*/
if (xfs_sb_version_hascrc(&mp->m_sb))
bp->b_ops = &xfs_inode_buf_ops;
inodes_per_buf = BBTOB(bp->b_io_length) >> mp->m_sb.sb_inodelog;
for (i = 0; i < inodes_per_buf; i++) {
next_unlinked_offset = (i * mp->m_sb.sb_inodesize) +
offsetof(xfs_dinode_t, di_next_unlinked);
while (next_unlinked_offset >=
(reg_buf_offset + reg_buf_bytes)) {
/*
* The next di_next_unlinked field is beyond
* the current logged region. Find the next
* logged region that contains or is beyond
* the current di_next_unlinked field.
*/
bit += nbits;
bit = xfs_next_bit(buf_f->blf_data_map,
buf_f->blf_map_size, bit);
/*
* If there are no more logged regions in the
* buffer, then we're done.
*/
if (bit == -1)
return 0;
nbits = xfs_contig_bits(buf_f->blf_data_map,
buf_f->blf_map_size, bit);
ASSERT(nbits > 0);
reg_buf_offset = bit << XFS_BLF_SHIFT;
reg_buf_bytes = nbits << XFS_BLF_SHIFT;
item_index++;
}
/*
* If the current logged region starts after the current
* di_next_unlinked field, then move on to the next
* di_next_unlinked field.
*/
if (next_unlinked_offset < reg_buf_offset)
continue;
ASSERT(item->ri_buf[item_index].i_addr != NULL);
ASSERT((item->ri_buf[item_index].i_len % XFS_BLF_CHUNK) == 0);
ASSERT((reg_buf_offset + reg_buf_bytes) <=
BBTOB(bp->b_io_length));
/*
* The current logged region contains a copy of the
* current di_next_unlinked field. Extract its value
* and copy it to the buffer copy.
*/
logged_nextp = item->ri_buf[item_index].i_addr +
next_unlinked_offset - reg_buf_offset;
if (unlikely(*logged_nextp == 0)) {
xfs_alert(mp,
"Bad inode buffer log record (ptr = 0x%p, bp = 0x%p). "
"Trying to replay bad (0) inode di_next_unlinked field.",
item, bp);
XFS_ERROR_REPORT("xlog_recover_do_inode_buf",
XFS_ERRLEVEL_LOW, mp);
return -EFSCORRUPTED;
}
buffer_nextp = xfs_buf_offset(bp, next_unlinked_offset);
*buffer_nextp = *logged_nextp;
/*
* If necessary, recalculate the CRC in the on-disk inode. We
* have to leave the inode in a consistent state for whoever
* reads it next....
*/
xfs_dinode_calc_crc(mp,
xfs_buf_offset(bp, i * mp->m_sb.sb_inodesize));
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 302 | 82.07% | 4 | 36.36% |
| Christoph Hellwig | 43 | 11.68% | 4 | 36.36% |
| David Chinner | 12 | 3.26% | 1 | 9.09% |
| Mark Tinguely | 8 | 2.17% | 1 | 9.09% |
| Stephen Lord | 3 | 0.82% | 1 | 9.09% |
| Total | 368 | 100.00% | 11 | 100.00% |
/*
* V5 filesystems know the age of the buffer on disk being recovered. We can
* have newer objects on disk than we are replaying, and so for these cases we
* don't want to replay the current change as that will make the buffer contents
* temporarily invalid on disk.
*
* The magic number might not match the buffer type we are going to recover
* (e.g. reallocated blocks), so we ignore the xfs_buf_log_format flags. Hence
* extract the LSN of the existing object in the buffer based on it's current
* magic number. If we don't recognise the magic number in the buffer, then
* return a LSN of -1 so that the caller knows it was an unrecognised block and
* so can recover the buffer.
*
* Note: we cannot rely solely on magic number matches to determine that the
* buffer has a valid LSN - we also need to verify that it belongs to this
* filesystem, so we need to extract the object's LSN and compare it to that
* which we read from the superblock. If the UUIDs don't match, then we've got a
* stale metadata block from an old filesystem instance that we need to recover
* over the top of.
*/
static xfs_lsn_t
xlog_recover_get_buf_lsn(
struct xfs_mount *mp,
struct xfs_buf *bp)
{
__uint32_t magic32;
__uint16_t magic16;
__uint16_t magicda;
void *blk = bp->b_addr;
uuid_t *uuid;
xfs_lsn_t lsn = -1;
/* v4 filesystems always recover immediately */
if (!xfs_sb_version_hascrc(&mp->m_sb))
goto recover_immediately;
magic32 = be32_to_cpu(*(__be32 *)blk);
switch (magic32) {
case XFS_ABTB_CRC_MAGIC:
case XFS_ABTC_CRC_MAGIC:
case XFS_ABTB_MAGIC:
case XFS_ABTC_MAGIC:
case XFS_RMAP_CRC_MAGIC:
case XFS_REFC_CRC_MAGIC:
case XFS_IBT_CRC_MAGIC:
case XFS_IBT_MAGIC: {
struct xfs_btree_block *btb = blk;
lsn = be64_to_cpu(btb->bb_u.s.bb_lsn);
uuid = &btb->bb_u.s.bb_uuid;
break;
}
case XFS_BMAP_CRC_MAGIC:
case XFS_BMAP_MAGIC: {
struct xfs_btree_block *btb = blk;
lsn = be64_to_cpu(btb->bb_u.l.bb_lsn);
uuid = &btb->bb_u.l.bb_uuid;
break;
}
case XFS_AGF_MAGIC:
lsn = be64_to_cpu(((struct xfs_agf *)blk)->agf_lsn);
uuid = &((struct xfs_agf *)blk)->agf_uuid;
break;
case XFS_AGFL_MAGIC:
lsn = be64_to_cpu(((struct xfs_agfl *)blk)->agfl_lsn);
uuid = &((struct xfs_agfl *)blk)->agfl_uuid;
break;
case XFS_AGI_MAGIC:
lsn = be64_to_cpu(((struct xfs_agi *)blk)->agi_lsn);
uuid = &((struct xfs_agi *)blk)->agi_uuid;
break;
case XFS_SYMLINK_MAGIC:
lsn = be64_to_cpu(((struct xfs_dsymlink_hdr *)blk)->sl_lsn);
uuid = &((struct xfs_dsymlink_hdr *)blk)->sl_uuid;
break;
case XFS_DIR3_BLOCK_MAGIC:
case XFS_DIR3_DATA_MAGIC:
case XFS_DIR3_FREE_MAGIC:
lsn = be64_to_cpu(((struct xfs_dir3_blk_hdr *)blk)->lsn);
uuid = &((struct xfs_dir3_blk_hdr *)blk)->uuid;
break;
case XFS_ATTR3_RMT_MAGIC:
/*
* Remote attr blocks are written synchronously, rather than
* being logged. That means they do not contain a valid LSN
* (i.e. transactionally ordered) in them, and hence any time we
* see a buffer to replay over the top of a remote attribute
* block we should simply do so.
*/
goto recover_immediately;
case XFS_SB_MAGIC:
/*
* superblock uuids are magic. We may or may not have a
* sb_meta_uuid on disk, but it will be set in the in-core
* superblock. We set the uuid pointer for verification
* according to the superblock feature mask to ensure we check
* the relevant UUID in the superblock.
*/
lsn = be64_to_cpu(((struct xfs_dsb *)blk)->sb_lsn);
if (xfs_sb_version_hasmetauuid(&mp->m_sb))
uuid = &((struct xfs_dsb *)blk)->sb_meta_uuid;
else
uuid = &((struct xfs_dsb *)blk)->sb_uuid;
break;
default:
break;
}
if (lsn != (xfs_lsn_t)-1) {
if (!uuid_equal(&mp->m_sb.sb_meta_uuid, uuid))
goto recover_immediately;
return lsn;
}
magicda = be16_to_cpu(((struct xfs_da_blkinfo *)blk)->magic);
switch (magicda) {
case XFS_DIR3_LEAF1_MAGIC:
case XFS_DIR3_LEAFN_MAGIC:
case XFS_DA3_NODE_MAGIC:
lsn = be64_to_cpu(((struct xfs_da3_blkinfo *)blk)->lsn);
uuid = &((struct xfs_da3_blkinfo *)blk)->uuid;
break;
default:
break;
}
if (lsn != (xfs_lsn_t)-1) {
if (!uuid_equal(&mp->m_sb.sb_uuid, uuid))
goto recover_immediately;
return lsn;
}
/*
* We do individual object checks on dquot and inode buffers as they
* have their own individual LSN records. Also, we could have a stale
* buffer here, so we have to at least recognise these buffer types.
*
* A notd complexity here is inode unlinked list processing - it logs
* the inode directly in the buffer, but we don't know which inodes have
* been modified, and there is no global buffer LSN. Hence we need to
* recover all inode buffer types immediately. This problem will be
* fixed by logical logging of the unlinked list modifications.
*/
magic16 = be16_to_cpu(*(__be16 *)blk);
switch (magic16) {
case XFS_DQUOT_MAGIC:
case XFS_DINODE_MAGIC:
goto recover_immediately;
default:
break;
}
/* unknown buffer contents, recover immediately */
recover_immediately:
return (xfs_lsn_t)-1;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 524 | 88.96% | 8 | 53.33% |
| Christoph Hellwig | 57 | 9.68% | 3 | 20.00% |
| Darrick J. Wong | 6 | 1.02% | 2 | 13.33% |
| Mark Tinguely | 1 | 0.17% | 1 | 6.67% |
| Stephen Lord | 1 | 0.17% | 1 | 6.67% |
| Total | 589 | 100.00% | 15 | 100.00% |
/*
* Validate the recovered buffer is of the correct type and attach the
* appropriate buffer operations to them for writeback. Magic numbers are in a
* few places:
* the first 16 bits of the buffer (inode buffer, dquot buffer),
* the first 32 bits of the buffer (most blocks),
* inside a struct xfs_da_blkinfo at the start of the buffer.
*/
static void
xlog_recover_validate_buf_type(
struct xfs_mount *mp,
struct xfs_buf *bp,
xfs_buf_log_format_t *buf_f,
xfs_lsn_t current_lsn)
{
struct xfs_da_blkinfo *info = bp->b_addr;
__uint32_t magic32;
__uint16_t magic16;
__uint16_t magicda;
char *warnmsg = NULL;
/*
* We can only do post recovery validation on items on CRC enabled
* fielsystems as we need to know when the buffer was written to be able
* to determine if we should have replayed the item. If we replay old
* metadata over a newer buffer, then it will enter a temporarily
* inconsistent state resulting in verification failures. Hence for now
* just avoid the verification stage for non-crc filesystems
*/
if (!xfs_sb_version_hascrc(&mp->m_sb))
return;
magic32 = be32_to_cpu(*(__be32 *)bp->b_addr);
magic16 = be16_to_cpu(*(__be16*)bp->b_addr);
magicda = be16_to_cpu(info->magic);
switch (xfs_blft_from_flags(buf_f)) {
case XFS_BLFT_BTREE_BUF:
switch (magic32) {
case XFS_ABTB_CRC_MAGIC:
case XFS_ABTC_CRC_MAGIC:
case XFS_ABTB_MAGIC:
case XFS_ABTC_MAGIC:
bp->b_ops = &xfs_allocbt_buf_ops;
break;
case XFS_IBT_CRC_MAGIC:
case XFS_FIBT_CRC_MAGIC:
case XFS_IBT_MAGIC:
case XFS_FIBT_MAGIC:
bp->b_ops = &xfs_inobt_buf_ops;
break;
case XFS_BMAP_CRC_MAGIC:
case XFS_BMAP_MAGIC:
bp->b_ops = &xfs_bmbt_buf_ops;
break;
case XFS_RMAP_CRC_MAGIC:
bp->b_ops = &xfs_rmapbt_buf_ops;
break;
case XFS_REFC_CRC_MAGIC:
bp->b_ops = &xfs_refcountbt_buf_ops;
break;
default:
warnmsg = "Bad btree block magic!";
break;
}
break;
case XFS_BLFT_AGF_BUF:
if (magic32 != XFS_AGF_MAGIC) {
warnmsg = "Bad AGF block magic!";
break;
}
bp->b_ops = &xfs_agf_buf_ops;
break;
case XFS_BLFT_AGFL_BUF:
if (magic32 != XFS_AGFL_MAGIC) {
warnmsg = "Bad AGFL block magic!";
break;
}
bp->b_ops = &xfs_agfl_buf_ops;
break;
case XFS_BLFT_AGI_BUF:
if (magic32 != XFS_AGI_MAGIC) {
warnmsg = "Bad AGI block magic!";
break;
}
bp->b_ops = &xfs_agi_buf_ops;
break;
case XFS_BLFT_UDQUOT_BUF:
case XFS_BLFT_PDQUOT_BUF:
case XFS_BLFT_GDQUOT_BUF:
#ifdef CONFIG_XFS_QUOTA
if (magic16 != XFS_DQUOT_MAGIC) {
warnmsg = "Bad DQUOT block magic!";
break;
}
bp->b_ops = &xfs_dquot_buf_ops;
#else
xfs_alert(mp,
"Trying to recover dquots without QUOTA support built in!");
ASSERT(0);
#endif
break;
case XFS_BLFT_DINO_BUF:
if (magic16 != XFS_DINODE_MAGIC) {
warnmsg = "Bad INODE block magic!";
break;
}
bp->b_ops = &xfs_inode_buf_ops;
break;
case XFS_BLFT_SYMLINK_BUF:
if (magic32 != XFS_SYMLINK_MAGIC) {
warnmsg = "Bad symlink block magic!";
break;
}
bp->b_ops = &xfs_symlink_buf_ops;
break;
case XFS_BLFT_DIR_BLOCK_BUF:
if (magic32 != XFS_DIR2_BLOCK_MAGIC &&
magic32 != XFS_DIR3_BLOCK_MAGIC) {
warnmsg = "Bad dir block magic!";
break;
}
bp->b_ops = &xfs_dir3_block_buf_ops;
break;
case XFS_BLFT_DIR_DATA_BUF:
if (magic32 != XFS_DIR2_DATA_MAGIC &&
magic32 != XFS_DIR3_DATA_MAGIC) {
warnmsg = "Bad dir data magic!";
break;
}
bp->b_ops = &xfs_dir3_data_buf_ops;
break;
case XFS_BLFT_DIR_FREE_BUF:
if (magic32 != XFS_DIR2_FREE_MAGIC &&
magic32 != XFS_DIR3_FREE_MAGIC) {
warnmsg = "Bad dir3 free magic!";
break;
}
bp->b_ops = &xfs_dir3_free_buf_ops;
break;
case XFS_BLFT_DIR_LEAF1_BUF:
if (magicda != XFS_DIR2_LEAF1_MAGIC &&
magicda != XFS_DIR3_LEAF1_MAGIC) {
warnmsg = "Bad dir leaf1 magic!";
break;
}
bp->b_ops = &xfs_dir3_leaf1_buf_ops;
break;
case XFS_BLFT_DIR_LEAFN_BUF:
if (magicda != XFS_DIR2_LEAFN_MAGIC &&
magicda != XFS_DIR3_LEAFN_MAGIC) {
warnmsg = "Bad dir leafn magic!";
break;
}
bp->b_ops = &xfs_dir3_leafn_buf_ops;
break;
case XFS_BLFT_DA_NODE_BUF:
if (magicda != XFS_DA_NODE_MAGIC &&
magicda != XFS_DA3_NODE_MAGIC) {
warnmsg = "Bad da node magic!";
break;
}
bp->b_ops = &xfs_da3_node_buf_ops;
break;
case XFS_BLFT_ATTR_LEAF_BUF:
if (magicda != XFS_ATTR_LEAF_MAGIC &&
magicda != XFS_ATTR3_LEAF_MAGIC) {
warnmsg = "Bad attr leaf magic!";
break;
}
bp->b_ops = &xfs_attr3_leaf_buf_ops;
break;
case XFS_BLFT_ATTR_RMT_BUF:
if (magic32 != XFS_ATTR3_RMT_MAGIC) {
warnmsg = "Bad attr remote magic!";
break;
}
bp->b_ops = &xfs_attr3_rmt_buf_ops;
break;
case XFS_BLFT_SB_BUF:
if (magic32 != XFS_SB_MAGIC) {
warnmsg = "Bad SB block magic!";
break;
}
bp->b_ops = &xfs_sb_buf_ops;
break;
#ifdef CONFIG_XFS_RT
case XFS_BLFT_RTBITMAP_BUF:
case XFS_BLFT_RTSUMMARY_BUF:
/* no magic numbers for verification of RT buffers */
bp->b_ops = &xfs_rtbuf_ops;
break;
#endif /* CONFIG_XFS_RT */
default:
xfs_warn(mp, "Unknown buffer type %d!",
xfs_blft_from_flags(buf_f));
break;
}
/*
* Nothing else to do in the case of a NULL current LSN as this means
* the buffer is more recent than the change in the log and will be
* skipped.
*/
if (current_lsn == NULLCOMMITLSN)
return;
if (warnmsg) {
xfs_warn(mp, warnmsg);
ASSERT(0);
}
/*
* We must update the metadata LSN of the buffer as it is written out to
* ensure that older transactions never replay over this one and corrupt
* the buffer. This can occur if log recovery is interrupted at some
* point after the current transaction completes, at which point a
* subsequent mount starts recovery from the beginning.
*
* Write verifiers update the metadata LSN from log items attached to
* the buffer. Therefore, initialize a bli purely to carry the LSN to
* the verifier. We'll clean it up in our ->iodone() callback.
*/
if (bp->b_ops) {
struct xfs_buf_log_item *bip;
ASSERT(!bp->b_iodone || bp->b_iodone == xlog_recover_iodone);
bp->b_iodone = xlog_recover_iodone;
xfs_buf_item_init(bp, mp);
bip = bp->b_fspriv;
bip->bli_item.li_lsn = current_lsn;
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 471 | 64.79% | 13 | 48.15% |
| Brian Foster | 128 | 17.61% | 4 | 14.81% |
| Christoph Hellwig | 102 | 14.03% | 5 | 18.52% |
| Darrick J. Wong | 22 | 3.03% | 2 | 7.41% |
| David Chinner | 2 | 0.28% | 1 | 3.70% |
| Glen Overby | 1 | 0.14% | 1 | 3.70% |
| Timothy Shimmin | 1 | 0.14% | 1 | 3.70% |
| Total | 727 | 100.00% | 27 | 100.00% |
/*
* Perform a 'normal' buffer recovery. Each logged region of the
* buffer should be copied over the corresponding region in the
* given buffer. The bitmap in the buf log format structure indicates
* where to place the logged data.
*/
STATIC void
xlog_recover_do_reg_buffer(
struct xfs_mount *mp,
xlog_recover_item_t *item,
struct xfs_buf *bp,
xfs_buf_log_format_t *buf_f,
xfs_lsn_t current_lsn)
{
int i;
int bit;
int nbits;
int error;
trace_xfs_log_recover_buf_reg_buf(mp->m_log, buf_f);
bit = 0;
i = 1; /* 0 is the buf format structure */
while (1) {
bit = xfs_next_bit(buf_f->blf_data_map,
buf_f->blf_map_size, bit);
if (bit == -1)
break;
nbits = xfs_contig_bits(buf_f->blf_data_map,
buf_f->blf_map_size, bit);
ASSERT(nbits > 0);
ASSERT(item->ri_buf[i].i_addr != NULL);
ASSERT(item->ri_buf[i].i_len % XFS_BLF_CHUNK == 0);
ASSERT(BBTOB(bp->b_io_length) >=
((uint)bit << XFS_BLF_SHIFT) + (nbits << XFS_BLF_SHIFT));
/*
* The dirty regions logged in the buffer, even though
* contiguous, may span multiple chunks. This is because the
* dirty region may span a physical page boundary in a buffer
* and hence be split into two separate vectors for writing into
* the log. Hence we need to trim nbits back to the length of
* the current region being copied out of the log.
*/
if (item->ri_buf[i].i_len < (nbits << XFS_BLF_SHIFT))
nbits = item->ri_buf[i].i_len >> XFS_BLF_SHIFT;
/*
* Do a sanity check if this is a dquot buffer. Just checking
* the first dquot in the buffer should do. XXXThis is
* probably a good thing to do for other buf types also.
*/
error = 0;
if (buf_f->blf_flags &
(XFS_BLF_UDQUOT_BUF|XFS_BLF_PDQUOT_BUF|XFS_BLF_GDQUOT_BUF)) {
if (item->ri_buf[i].i_addr == NULL) {
xfs_alert(mp,
"XFS: NULL dquot in %s.", __func__);
goto next;
}
if (item->ri_buf[i].i_len < sizeof(xfs_disk_dquot_t)) {
xfs_alert(mp,
"XFS: dquot too small (%d) in %s.",
item->ri_buf[i].i_len, __func__);
goto next;
}
error = xfs_dqcheck(mp, item->ri_buf[i].i_addr,
-1, 0, XFS_QMOPT_DOWARN,
"dquot_buf_recover");
if (error)
goto next;
}
memcpy(xfs_buf_offset(bp,
(uint)bit << XFS_BLF_SHIFT), /* dest */
item->ri_buf[i].i_addr, /* source */
nbits<<XFS_BLF_SHIFT); /* length */
next:
i++;
bit += nbits;
}
/* Shouldn't be any more regions */
ASSERT(i == item->ri_total);
xlog_recover_validate_buf_type(mp, bp, buf_f, current_lsn);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 311 | 83.16% | 9 | 52.94% |
| Christoph Hellwig | 50 | 13.37% | 5 | 29.41% |
| David Chinner | 6 | 1.60% | 1 | 5.88% |
| Brian Foster | 5 | 1.34% | 1 | 5.88% |
| Timothy Shimmin | 2 | 0.53% | 1 | 5.88% |
| Total | 374 | 100.00% | 17 | 100.00% |
/*
* Perform a dquot buffer recovery.
* Simple algorithm: if we have found a QUOTAOFF log item of the same type
* (ie. USR or GRP), then just toss this buffer away; don't recover it.
* Else, treat it as a regular buffer and do recovery.
*
* Return false if the buffer was tossed and true if we recovered the buffer to
* indicate to the caller if the buffer needs writing.
*/
STATIC bool
xlog_recover_do_dquot_buffer(
struct xfs_mount *mp,
struct xlog *log,
struct xlog_recover_item *item,
struct xfs_buf *bp,
struct xfs_buf_log_format *buf_f)
{
uint type;
trace_xfs_log_recover_buf_dquot_buf(log, buf_f);
/*
* Filesystems are required to send in quota flags at mount time.
*/
if (!mp->m_qflags)
return false;
type = 0;
if (buf_f->blf_flags & XFS_BLF_UDQUOT_BUF)
type |= XFS_DQ_USER;
if (buf_f->blf_flags & XFS_BLF_PDQUOT_BUF)
type |= XFS_DQ_PROJ;
if (buf_f->blf_flags & XFS_BLF_GDQUOT_BUF)
type |= XFS_DQ_GROUP;
/*
* This type of quotas was turned off, so ignore this buffer
*/
if (log->l_quotaoffs_flag & type)
return false;
xlog_recover_do_reg_buffer(mp, item, bp, buf_f, NULLCOMMITLSN);
return true;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 64 | 53.33% | 3 | 23.08% |
| Dave Chinner | 36 | 30.00% | 6 | 46.15% |
| Mark Tinguely | 10 | 8.33% | 1 | 7.69% |
| Nathan Scott | 8 | 6.67% | 2 | 15.38% |
| Brian Foster | 2 | 1.67% | 1 | 7.69% |
| Total | 120 | 100.00% | 13 | 100.00% |
/*
* This routine replays a modification made to a buffer at runtime.
* There are actually two types of buffer, regular and inode, which
* are handled differently. Inode buffers are handled differently
* in that we only recover a specific set of data from them, namely
* the inode di_next_unlinked fields. This is because all other inode
* data is actually logged via inode records and any data we replay
* here which overlaps that may be stale.
*
* When meta-data buffers are freed at run time we log a buffer item
* with the XFS_BLF_CANCEL bit set to indicate that previous copies
* of the buffer in the log should not be replayed at recovery time.
* This is so that if the blocks covered by the buffer are reused for
* file data before we crash we don't end up replaying old, freed
* meta-data into a user's file.
*
* To handle the cancellation of buffer log items, we make two passes
* over the log during recovery. During the first we build a table of
* those buffers which have been cancelled, and during the second we
* only replay those buffers which do not have corresponding cancel
* records in the table. See xlog_recover_buffer_pass[1,2] above
* for more details on the implementation of the table of cancel records.
*/
STATIC int
xlog_recover_buffer_pass2(
struct xlog *log,
struct list_head *buffer_list,
struct xlog_recover_item *item,
xfs_lsn_t current_lsn)
{
xfs_buf_log_format_t *buf_f = item->ri_buf[0].i_addr;
xfs_mount_t *mp = log->l_mp;
xfs_buf_t *bp;
int error;
uint buf_flags;
xfs_lsn_t lsn;
/*
* In this pass we only want to recover all the buffers which have
* not been cancelled and are not cancellation buffers themselves.
*/
if (xlog_check_buffer_cancelled(log, buf_f->blf_blkno,
buf_f->blf_len, buf_f->blf_flags)) {
trace_xfs_log_recover_buf_cancel(log, buf_f);
return 0;
}
trace_xfs_log_recover_buf_recover(log, buf_f);
buf_flags = 0;
if (buf_f->blf_flags & XFS_BLF_INODE_BUF)
buf_flags |= XBF_UNMAPPED;
bp = xfs_buf_read(mp->m_ddev_targp, buf_f->blf_blkno, buf_f->blf_len,
buf_flags, NULL);
if (!bp)
return -ENOMEM;
error = bp->b_error;
if (error) {
xfs_buf_ioerror_alert(bp, "xlog_recover_do..(read#1)");
goto out_release;
}
/*
* Recover the buffer only if we get an LSN from it and it's less than
* the lsn of the transaction we are replaying.
*
* Note that we have to be extremely careful of readahead here.
* Readahead does not attach verfiers to the buffers so if we don't
* actually do any replay after readahead because of the LSN we found
* in the buffer if more recent than that current transaction then we
* need to attach the verifier directly. Failure to do so can lead to
* future recovery actions (e.g. EFI and unlinked list recovery) can
* operate on the buffers and they won't get the verifier attached. This
* can lead to blocks on disk having the correct content but a stale
* CRC.
*
* It is safe to assume these clean buffers are currently up to date.
* If the buffer is dirtied by a later transaction being replayed, then
* the verifier will be reset to match whatever recover turns that
* buffer into.
*/
lsn = xlog_recover_get_buf_lsn(mp, bp);
if (lsn && lsn != -1 && XFS_LSN_CMP(lsn, current_lsn) >= 0) {
trace_xfs_log_recover_buf_skip(log, buf_f);
xlog_recover_validate_buf_type(mp, bp, buf_f, NULLCOMMITLSN);
goto out_release;
}
if (buf_f->blf_flags & XFS_BLF_INODE_BUF) {
error = xlog_recover_do_inode_buffer(mp, item, bp, buf_f);
if (error)
goto out_release;
} else if (buf_f->blf_flags &
(XFS_BLF_UDQUOT_BUF|XFS_BLF_PDQUOT_BUF|XFS_BLF_GDQUOT_BUF)) {
bool dirty;
dirty = xlog_recover_do_dquot_buffer(mp, log, item, bp, buf_f);
if (!dirty)
goto out_release;
} else {
xlog_recover_do_reg_buffer(mp, item, bp, buf_f, current_lsn);
}
/*
* Perform delayed write on the buffer. Asynchronous writes will be
* slower when taking into account all the buffers to be flushed.
*
* Also make sure that only inode buffers with good sizes stay in
* the buffer cache. The kernel moves inodes in buffers of 1 block
* or mp->m_inode_cluster_size bytes, whichever is bigger. The inode
* buffers in the log can be a different size if the log was generated
* by an older kernel using unclustered inode buffers or a newer kernel
* running with a different inode cluster size. Regardless, if the
* the inode buffer size isn't MAX(blocksize, mp->m_inode_cluster_size)
* for *our* value of mp->m_inode_cluster_size, then we need to keep
* the buffer out of the buffer cache so that the buffer won't
* overlap with future reads of those inodes.
*/
if (XFS_DINODE_MAGIC ==
be16_to_cpu(*((__be16 *)xfs_buf_offset(bp, 0))) &&
(BBTOB(bp->b_io_length) != MAX(log->l_mp->m_sb.sb_blocksize,
(__uint32_t)log->l_mp->m_inode_cluster_size))) {
xfs_buf_stale(bp);
error = xfs_bwrite(bp);
} else {
ASSERT(bp->b_target->bt_mount == mp);
bp->b_iodone = xlog_recover_iodone;
xfs_buf_delwri_queue(bp, buffer_list);
}
out_release:
xfs_buf_relse(bp);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 227 | 55.77% | 14 | 36.84% |
| Dave Chinner | 146 | 35.87% | 14 | 36.84% |
| Brian Foster | 11 | 2.70% | 2 | 5.26% |
| Chandra Seetharaman | 11 | 2.70% | 3 | 7.89% |
| Mark Tinguely | 4 | 0.98% | 1 | 2.63% |
| Nathan Scott | 3 | 0.74% | 2 | 5.26% |
| Jie Liu | 3 | 0.74% | 1 | 2.63% |
| David Chinner | 2 | 0.49% | 1 | 2.63% |
| Total | 407 | 100.00% | 38 | 100.00% |
/*
* Inode fork owner changes
*
* If we have been told that we have to reparent the inode fork, it's because an
* extent swap operation on a CRC enabled filesystem has been done and we are
* replaying it. We need to walk the BMBT of the appropriate fork and change the
* owners of it.
*
* The complexity here is that we don't have an inode context to work with, so
* after we've replayed the inode we need to instantiate one. This is where the
* fun begins.
*
* We are in the middle of log recovery, so we can't run transactions. That
* means we cannot use cache coherent inode instantiation via xfs_iget(), as
* that will result in the corresponding iput() running the inode through
* xfs_inactive(). If we've just replayed an inode core that changes the link
* count to zero (i.e. it's been unlinked), then xfs_inactive() will run
* transactions (bad!).
*
* So, to avoid this, we instantiate an inode directly from the inode core we've
* just recovered. We have the buffer still locked, and all we really need to
* instantiate is the inode core and the forks being modified. We can do this
* manually, then run the inode btree owner change, and then tear down the
* xfs_inode without having to run any transactions at all.
*
* Also, because we don't have a transaction context available here but need to
* gather all the buffers we modify for writeback so we pass the buffer_list
* instead for the operation to use.
*/
STATIC int
xfs_recover_inode_owner_change(
struct xfs_mount *mp,
struct xfs_dinode *dip,
struct xfs_inode_log_format *in_f,
struct list_head *buffer_list)
{
struct xfs_inode *ip;
int error;
ASSERT(in_f->ilf_fields & (XFS_ILOG_DOWNER|XFS_ILOG_AOWNER));
ip = xfs_inode_alloc(mp, in_f->ilf_ino);
if (!ip)
return -ENOMEM;
/* instantiate the inode */
xfs_inode_from_disk(ip, dip);
ASSERT(ip->i_d.di_version >= 3);
error = xfs_iformat_fork(ip, dip);
if (error)
goto out_free_ip;
if (in_f->ilf_fields & XFS_ILOG_DOWNER) {
ASSERT(in_f->ilf_fields & XFS_ILOG_DBROOT);
error = xfs_bmbt_change_owner(NULL, ip, XFS_DATA_FORK,
ip->i_ino, buffer_list);
if (error)
goto out_free_ip;
}
if (in_f->ilf_fields & XFS_ILOG_AOWNER) {
ASSERT(in_f->ilf_fields & XFS_ILOG_ABROOT);
error = xfs_bmbt_change_owner(NULL, ip, XFS_ATTR_FORK,
ip->i_ino, buffer_list);
if (error)
goto out_free_ip;
}
out_free_ip:
xfs_inode_free(ip);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 180 | 90.91% | 5 | 71.43% |
| Christoph Hellwig | 10 | 5.05% | 1 | 14.29% |
| David Chinner | 8 | 4.04% | 1 | 14.29% |
| Total | 198 | 100.00% | 7 | 100.00% |
STATIC int
xlog_recover_inode_pass2(
struct xlog *log,
struct list_head *buffer_list,
struct xlog_recover_item *item,
xfs_lsn_t current_lsn)
{
xfs_inode_log_format_t *in_f;
xfs_mount_t *mp = log->l_mp;
xfs_buf_t *bp;
xfs_dinode_t *dip;
int len;
char *src;
char *dest;
int error;
int attr_index;
uint fields;
struct xfs_log_dinode *ldip;
uint isize;
int need_free = 0;
if (item->ri_buf[0].i_len == sizeof(xfs_inode_log_format_t)) {
in_f = item->ri_buf[0].i_addr;
} else {
in_f = kmem_alloc(sizeof(xfs_inode_log_format_t), KM_SLEEP);
need_free = 1;
error = xfs_inode_item_format_convert(&item->ri_buf[0], in_f);
if (error)
goto error;
}
/*
* Inode buffers can be freed, look out for it,
* and do not replay the inode.
*/
if (xlog_check_buffer_cancelled(log, in_f->ilf_blkno,
in_f->ilf_len, 0)) {
error = 0;
trace_xfs_log_recover_inode_cancel(log, in_f);
goto error;
}
trace_xfs_log_recover_inode_recover(log, in_f);
bp = xfs_buf_read(mp->m_ddev_targp, in_f->ilf_blkno, in_f->ilf_len, 0,
&xfs_inode_buf_ops);
if (!bp) {
error = -ENOMEM;
goto error;
}
error = bp->b_error;
if (error) {
xfs_buf_ioerror_alert(bp, "xlog_recover_do..(read#2)");
goto out_release;
}
ASSERT(in_f->ilf_fields & XFS_ILOG_CORE);
dip = xfs_buf_offset(bp, in_f->ilf_boffset);
/*
* Make sure the place we're flushing out to really looks
* like an inode!
*/
if (unlikely(dip->di_magic != cpu_to_be16(XFS_DINODE_MAGIC))) {
xfs_alert(mp,
"%s: Bad inode magic number, dip = 0x%p, dino bp = 0x%p, ino = %Ld",
__func__, dip, bp, in_f->ilf_ino);
XFS_ERROR_REPORT("xlog_recover_inode_pass2(1)",
XFS_ERRLEVEL_LOW, mp);
error = -EFSCORRUPTED;
goto out_release;
}
ldip = item->ri_buf[1].i_addr;
if (unlikely(ldip->di_magic != XFS_DINODE_MAGIC)) {
xfs_alert(mp,
"%s: Bad inode log record, rec ptr 0x%p, ino %Ld",
__func__, item, in_f->ilf_ino);
XFS_ERROR_REPORT("xlog_recover_inode_pass2(2)",
XFS_ERRLEVEL_LOW, mp);
error = -EFSCORRUPTED;
goto out_release;
}
/*
* If the inode has an LSN in it, recover the inode only if it's less
* than the lsn of the transaction we are replaying. Note: we still
* need to replay an owner change even though the inode is more recent
* than the transaction as there is no guarantee that all the btree
* blocks are more recent than this transaction, too.
*/
if (dip->di_version >= 3) {
xfs_lsn_t lsn = be64_to_cpu(dip->di_lsn);
if (lsn && lsn != -1 && XFS_LSN_CMP(lsn, current_lsn) >= 0) {
trace_xfs_log_recover_inode_skip(log, in_f);
error = 0;
goto out_owner_change;
}
}
/*
* di_flushiter is only valid for v1/2 inodes. All changes for v3 inodes
* are transactional and if ordering is necessary we can determine that
* more accurately by the LSN field in the V3 inode core. Don't trust
* the inode versions we might be changing them here - use the
* superblock flag to determine whether we need to look at di_flushiter
* to skip replay when the on disk inode is newer than the log one
*/
if (!xfs_sb_version_hascrc(&mp->m_sb) &&
ldip->di_flushiter < be16_to_cpu(dip->di_flushiter)) {
/*
* Deal with the wrap case, DI_MAX_FLUSH is less
* than smaller numbers
*/
if (be16_to_cpu(dip->di_flushiter) == DI_MAX_FLUSH &&
ldip->di_flushiter < (DI_MAX_FLUSH >> 1)) {
/* do nothing */
} else {
trace_xfs_log_recover_inode_skip(log, in_f);
error = 0;
goto out_release;
}
}
/* Take the opportunity to reset the flush iteration count */
ldip->di_flushiter = 0;
if (unlikely(S_ISREG(ldip->di_mode))) {
if ((ldip->di_format != XFS_DINODE_FMT_EXTENTS) &&
(ldip->di_format != XFS_DINODE_FMT_BTREE)) {
XFS_CORRUPTION_ERROR("xlog_recover_inode_pass2(3)",
XFS_ERRLEVEL_LOW, mp, ldip);
xfs_alert(mp,
"%s: Bad regular inode log record, rec ptr 0x%p, "
"ino ptr = 0x%p, ino bp = 0x%p, ino %Ld",
__func__, item, dip, bp, in_f->ilf_ino);
error = -EFSCORRUPTED;
goto out_release;
}
} else if (unlikely(S_ISDIR(ldip->di_mode))) {
if ((ldip->di_format != XFS_DINODE_FMT_EXTENTS) &&
(ldip->di_format != XFS_DINODE_FMT_BTREE) &&
(ldip->di_format != XFS_DINODE_FMT_LOCAL)) {
XFS_CORRUPTION_ERROR("xlog_recover_inode_pass2(4)",
XFS_ERRLEVEL_LOW, mp, ldip);
xfs_alert(mp,
"%s: Bad dir inode log record, rec ptr 0x%p, "
"ino ptr = 0x%p, ino bp = 0x%p, ino %Ld",
__func__, item, dip, bp, in_f->ilf_ino);
error = -EFSCORRUPTED;
goto out_release;
}
}
if (unlikely(ldip->di_nextents + ldip->di_anextents > ldip->di_nblocks)){
XFS_CORRUPTION_ERROR("xlog_recover_inode_pass2(5)",
XFS_ERRLEVEL_LOW, mp, ldip);
xfs_alert(mp,
"%s: Bad inode log record, rec ptr 0x%p, dino ptr 0x%p, "
"dino bp 0x%p, ino %Ld, total extents = %d, nblocks = %Ld",
__func__, item, dip, bp, in_f->ilf_ino,
ldip->di_nextents + ldip->di_anextents,
ldip->di_nblocks);
error = -EFSCORRUPTED;
goto out_release;
}
if (unlikely(ldip->di_forkoff > mp->m_sb.sb_inodesize)) {
XFS_CORRUPTION_ERROR("xlog_recover_inode_pass2(6)",
XFS_ERRLEVEL_LOW, mp, ldip);
xfs_alert(mp,
"%s: Bad inode log record, rec ptr 0x%p, dino ptr 0x%p, "
"dino bp 0x%p, ino %Ld, forkoff 0x%x", __func__,
item, dip, bp, in_f->ilf_ino, ldip->di_forkoff);
error = -EFSCORRUPTED;
goto out_release;
}
isize = xfs_log_dinode_size(ldip->di_version);
if (unlikely(item->ri_buf[1].i_len > isize)) {
XFS_CORRUPTION_ERROR("xlog_recover_inode_pass2(7)",
XFS_ERRLEVEL_LOW, mp, ldip);
xfs_alert(mp,
"%s: Bad inode log record length %d, rec ptr 0x%p",
__func__, item->ri_buf[1].i_len, item);
error = -EFSCORRUPTED;
goto out_release;
}
/* recover the log dinode inode into the on disk inode */
xfs_log_dinode_to_disk(ldip, dip);
/* the rest is in on-disk format */
if (item->ri_buf[1].i_len > isize) {
memcpy((char *)dip + isize,
item->ri_buf[1].i_addr + isize,
item->ri_buf[1].i_len - isize);
}
fields = in_f->ilf_fields;
switch (fields & (XFS_ILOG_DEV | XFS_ILOG_UUID)) {
case XFS_ILOG_DEV:
xfs_dinode_put_rdev(dip, in_f->ilf_u.ilfu_rdev);
break;
case XFS_ILOG_UUID:
memcpy(XFS_DFORK_DPTR(dip),
&in_f->ilf_u.ilfu_uuid,
sizeof(uuid_t));
break;
}
if (in_f->ilf_size == 2)
goto out_owner_change;
len = item->ri_buf[2].i_len;
src = item->ri_buf[2].i_addr;
ASSERT(in_f->ilf_size <= 4);
ASSERT((in_f->ilf_size == 3) || (fields & XFS_ILOG_AFORK));
ASSERT(!(fields & XFS_ILOG_DFORK) ||
(len == in_f->ilf_dsize));
switch (fields & XFS_ILOG_DFORK) {
case XFS_ILOG_DDATA:
case XFS_ILOG_DEXT:
memcpy(XFS_DFORK_DPTR(dip), src, len);
break;
case XFS_ILOG_DBROOT:
xfs_bmbt_to_bmdr(mp, (struct xfs_btree_block *)src, len,
(xfs_bmdr_block_t *)XFS_DFORK_DPTR(dip),
XFS_DFORK_DSIZE(dip, mp));
break;
default:
/*
* There are no data fork flags set.
*/
ASSERT((fields & XFS_ILOG_DFORK) == 0);
break;
}
/*
* If we logged any attribute data, recover it. There may or
* may not have been any other non-core data logged in this
* transaction.
*/
if (in_f->ilf_fields & XFS_ILOG_AFORK) {
if (in_f->ilf_fields & XFS_ILOG_DFORK) {
attr_index = 3;
} else {
attr_index = 2;
}
len = item->ri_buf[attr_index].i_len;
src = item->ri_buf[attr_index].i_addr;
ASSERT(len == in_f->ilf_asize);
switch (in_f->ilf_fields & XFS_ILOG_AFORK) {
case XFS_ILOG_ADATA:
case XFS_ILOG_AEXT:
dest = XFS_DFORK_APTR(dip);
ASSERT(len <= XFS_DFORK_ASIZE(dip, mp));
memcpy(dest, src, len);
break;
case XFS_ILOG_ABROOT:
dest = XFS_DFORK_APTR(dip);
xfs_bmbt_to_bmdr(mp, (struct xfs_btree_block *)src,
len, (xfs_bmdr_block_t*)dest,
XFS_DFORK_ASIZE(dip, mp));
break;
default:
xfs_warn(log->l_mp, "%s: Invalid flag", __func__);
ASSERT(0);
error = -EIO;
goto out_release;
}
}
out_owner_change:
if (in_f->ilf_fields & (XFS_ILOG_DOWNER|XFS_ILOG_AOWNER))
error = xfs_recover_inode_owner_change(mp, dip, in_f,
buffer_list);
/* re-generate the checksum. */
xfs_dinode_calc_crc(log->l_mp, dip);
ASSERT(bp->b_target->bt_mount == mp);
bp->b_iodone = xlog_recover_iodone;
xfs_buf_delwri_queue(bp, buffer_list);
out_release:
xfs_buf_relse(bp);
error:
if (need_free)
kmem_free(in_f);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 663 | 48.29% | 17 | 39.53% |
| Dave Chinner | 473 | 34.45% | 15 | 34.88% |
| Timothy Shimmin | 82 | 5.97% | 1 | 2.33% |
| Glen Overby | 71 | 5.17% | 1 | 2.33% |
| Stephen Lord | 39 | 2.84% | 2 | 4.65% |
| Chandra Seetharaman | 25 | 1.82% | 3 | 6.98% |
| Nathan Scott | 10 | 0.73% | 2 | 4.65% |
| Al Viro | 6 | 0.44% | 1 | 2.33% |
| Mark Tinguely | 4 | 0.29% | 1 | 2.33% |
| Total | 1373 | 100.00% | 43 | 100.00% |
/*
* Recover QUOTAOFF records. We simply make a note of it in the xlog
* structure, so that we know not to do any dquot item or dquot buffer recovery,
* of that type.
*/
STATIC int
xlog_recover_quotaoff_pass1(
struct xlog *log,
struct xlog_recover_item *item)
{
xfs_qoff_logformat_t *qoff_f = item->ri_buf[0].i_addr;
ASSERT(qoff_f);
/*
* The logitem format's flag tells us if this was user quotaoff,
* group/project quotaoff or both.
*/
if (qoff_f->qf_flags & XFS_UQUOTA_ACCT)
log->l_quotaoffs_flag |= XFS_DQ_USER;
if (qoff_f->qf_flags & XFS_PQUOTA_ACCT)
log->l_quotaoffs_flag |= XFS_DQ_PROJ;
if (qoff_f->qf_flags & XFS_GQUOTA_ACCT)
log->l_quotaoffs_flag |= XFS_DQ_GROUP;
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 66 | 82.50% | 2 | 40.00% |
| Christoph Hellwig | 13 | 16.25% | 2 | 40.00% |
| Timothy Shimmin | 1 | 1.25% | 1 | 20.00% |
| Total | 80 | 100.00% | 5 | 100.00% |
/*
* Recover a dquot record
*/
STATIC int
xlog_recover_dquot_pass2(
struct xlog *log,
struct list_head *buffer_list,
struct xlog_recover_item *item,
xfs_lsn_t current_lsn)
{
xfs_mount_t *mp = log->l_mp;
xfs_buf_t *bp;
struct xfs_disk_dquot *ddq, *recddq;
int error;
xfs_dq_logformat_t *dq_f;
uint type;
/*
* Filesystems are required to send in quota flags at mount time.
*/
if (mp->m_qflags == 0)
return 0;
recddq = item->ri_buf[1].i_addr;
if (recddq == NULL) {
xfs_alert(log->l_mp, "NULL dquot in %s.", __func__);
return -EIO;
}
if (item->ri_buf[1].i_len < sizeof(xfs_disk_dquot_t)) {
xfs_alert(log->l_mp, "dquot too small (%d) in %s.",
item->ri_buf[1].i_len, __func__);
return -EIO;
}
/*
* This type of quotas was turned off, so ignore this record.
*/
type = recddq->d_flags & (XFS_DQ_USER | XFS_DQ_PROJ | XFS_DQ_GROUP);
ASSERT(type);
if (log->l_quotaoffs_flag & type)
return 0;
/*
* At this point we know that quota was _not_ turned off.
* Since the mount flags are not indicating to us otherwise, this
* must mean that quota is on, and the dquot needs to be replayed.
* Remember that we may not have fully recovered the superblock yet,
* so we can't do the usual trick of looking at the SB quota bits.
*
* The other possibility, of course, is that the quota subsystem was
* removed since the last mount - ENOSYS.
*/
dq_f = item->ri_buf[0].i_addr;
ASSERT(dq_f);
error = xfs_dqcheck(mp, recddq, dq_f->qlf_id, 0, XFS_QMOPT_DOWARN,
"xlog_recover_dquot_pass2 (log copy)");
if (error)
return -EIO;
ASSERT(dq_f->qlf_len == 1);
/*
* At this point we are assuming that the dquots have been allocated
* and hence the buffer has valid dquots stamped in it. It should,
* therefore, pass verifier validation. If the dquot is bad, then the
* we'll return an error here, so we don't need to specifically check
* the dquot in the buffer after the verifier has run.
*/
error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, dq_f->qlf_blkno,
XFS_FSB_TO_BB(mp, dq_f->qlf_len), 0, &bp,
&xfs_dquot_buf_ops);
if (error)
return error;
ASSERT(bp);
ddq = xfs_buf_offset(bp, dq_f->qlf_boffset);
/*
* If the dquot has an LSN in it, recover the dquot only if it's less
* than the lsn of the transaction we are replaying.
*/
if (xfs_sb_version_hascrc(&mp->m_sb)) {
struct xfs_dqblk *dqb = (struct xfs_dqblk *)ddq;
xfs_lsn_t lsn = be64_to_cpu(dqb->dd_lsn);
if (lsn && lsn != -1 && XFS_LSN_CMP(lsn, current_lsn) >= 0) {
goto out_release;
}
}
memcpy(ddq, recddq, item->ri_buf[1].i_len);
if (xfs_sb_version_hascrc(&mp->m_sb)) {
xfs_update_cksum((char *)ddq, sizeof(struct xfs_dqblk),
XFS_DQUOT_CRC_OFF);
}
ASSERT(dq_f->qlf_size == 2);
ASSERT(bp->b_target->bt_mount == mp);
bp->b_iodone = xlog_recover_iodone;
xfs_buf_delwri_queue(bp, buffer_list);
out_release:
xfs_buf_relse(bp);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 278 | 64.65% | 6 | 35.29% |
| Christoph Hellwig | 113 | 26.28% | 7 | 41.18% |
| Glen Overby | 21 | 4.88% | 1 | 5.88% |
| Stephen Lord | 14 | 3.26% | 1 | 5.88% |
| Al Viro | 2 | 0.47% | 1 | 5.88% |
| Timothy Shimmin | 2 | 0.47% | 1 | 5.88% |
| Total | 430 | 100.00% | 17 | 100.00% |
/*
* This routine is called to create an in-core extent free intent
* item from the efi format structure which was logged on disk.
* It allocates an in-core efi, copies the extents from the format
* structure into it, and adds the efi to the AIL with the given
* LSN.
*/
STATIC int
xlog_recover_efi_pass2(
struct xlog *log,
struct xlog_recover_item *item,
xfs_lsn_t lsn)
{
int error;
struct xfs_mount *mp = log->l_mp;
struct xfs_efi_log_item *efip;
struct xfs_efi_log_format *efi_formatp;
efi_formatp = item->ri_buf[0].i_addr;
efip = xfs_efi_init(mp, efi_formatp->efi_nextents);
error = xfs_efi_copy_format(&item->ri_buf[0], &efip->efi_format);
if (error) {
xfs_efi_item_free(efip);
return error;
}
atomic_set(&efip->efi_next_extent, efi_formatp->efi_nextents);
spin_lock(&log->l_ailp->xa_lock);
/*
* The EFI has two references. One for the EFD and one for EFI to ensure
* it makes it into the AIL. Insert the EFI into the AIL directly and
* drop the EFI reference. Note that xfs_trans_ail_update() drops the
* AIL lock.
*/
xfs_trans_ail_update(log->l_ailp, &efip->efi_item, lsn);
xfs_efi_release(efip);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 89 | 63.57% | 1 | 16.67% |
| Christoph Hellwig | 26 | 18.57% | 2 | 33.33% |
| Brian Foster | 16 | 11.43% | 1 | 16.67% |
| Glen Overby | 5 | 3.57% | 1 | 16.67% |
| Timothy Shimmin | 4 | 2.86% | 1 | 16.67% |
| Total | 140 | 100.00% | 6 | 100.00% |
/*
* This routine is called when an EFD format structure is found in a committed
* transaction in the log. Its purpose is to cancel the corresponding EFI if it
* was still in the log. To do this it searches the AIL for the EFI with an id
* equal to that in the EFD format structure. If we find it we drop the EFD
* reference, which removes the EFI from the AIL and frees it.
*/
STATIC int
xlog_recover_efd_pass2(
struct xlog *log,
struct xlog_recover_item *item)
{
xfs_efd_log_format_t *efd_formatp;
xfs_efi_log_item_t *efip = NULL;
xfs_log_item_t *lip;
__uint64_t efi_id;
struct xfs_ail_cursor cur;
struct xfs_ail *ailp = log->l_ailp;
efd_formatp = item->ri_buf[0].i_addr;
ASSERT((item->ri_buf[0].i_len == (sizeof(xfs_efd_log_format_32_t) +
((efd_formatp->efd_nextents - 1) * sizeof(xfs_extent_32_t)))) ||
(item->ri_buf[0].i_len == (sizeof(xfs_efd_log_format_64_t) +
((efd_formatp->efd_nextents - 1) * sizeof(xfs_extent_64_t)))));
efi_id = efd_formatp->efd_efi_id;
/*
* Search for the EFI with the id in the EFD format structure in the
* AIL.
*/
spin_lock(&ailp->xa_lock);
lip = xfs_trans_ail_cursor_first(ailp, &cur, 0);
while (lip != NULL) {
if (lip->li_type == XFS_LI_EFI) {
efip = (xfs_efi_log_item_t *)lip;
if (efip->efi_format.efi_id == efi_id) {
/*
* Drop the EFD reference to the EFI. This
* removes the EFI from the AIL and frees it.
*/
spin_unlock(&ailp->xa_lock);
xfs_efi_release(efip);
spin_lock(&ailp->xa_lock);
break;
}
}
lip = xfs_trans_ail_cursor_next(ailp, &cur);
}
xfs_trans_ail_cursor_done(&cur);
spin_unlock(&ailp->xa_lock);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 140 | 58.09% | 1 | 11.11% |
| Christoph Hellwig | 87 | 36.10% | 4 | 44.44% |
| Brian Foster | 7 | 2.90% | 1 | 11.11% |
| Mark Tinguely | 4 | 1.66% | 1 | 11.11% |
| Nathan Scott | 3 | 1.24% | 2 | 22.22% |
| Total | 241 | 100.00% | 9 | 100.00% |
/*
* This routine is called to create an in-core extent rmap update
* item from the rui format structure which was logged on disk.
* It allocates an in-core rui, copies the extents from the format
* structure into it, and adds the rui to the AIL with the given
* LSN.
*/
STATIC int
xlog_recover_rui_pass2(
struct xlog *log,
struct xlog_recover_item *item,
xfs_lsn_t lsn)
{
int error;
struct xfs_mount *mp = log->l_mp;
struct xfs_rui_log_item *ruip;
struct xfs_rui_log_format *rui_formatp;
rui_formatp = item->ri_buf[0].i_addr;
ruip = xfs_rui_init(mp, rui_formatp->rui_nextents);
error = xfs_rui_copy_format(&item->ri_buf[0], &ruip->rui_format);
if (error) {
xfs_rui_item_free(ruip);
return error;
}
atomic_set(&ruip->rui_next_extent, rui_formatp->rui_nextents);
spin_lock(&log->l_ailp->xa_lock);
/*
* The RUI has two references. One for the RUD and one for RUI to ensure
* it makes it into the AIL. Insert the RUI into the AIL directly and
* drop the RUI reference. Note that xfs_trans_ail_update() drops the
* AIL lock.
*/
xfs_trans_ail_update(log->l_ailp, &ruip->rui_item, lsn);
xfs_rui_release(ruip);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 140 | 100.00% | 1 | 100.00% |
| Total | 140 | 100.00% | 1 | 100.00% |
/*
* This routine is called when an RUD format structure is found in a committed
* transaction in the log. Its purpose is to cancel the corresponding RUI if it
* was still in the log. To do this it searches the AIL for the RUI with an id
* equal to that in the RUD format structure. If we find it we drop the RUD
* reference, which removes the RUI from the AIL and frees it.
*/
STATIC int
xlog_recover_rud_pass2(
struct xlog *log,
struct xlog_recover_item *item)
{
struct xfs_rud_log_format *rud_formatp;
struct xfs_rui_log_item *ruip = NULL;
struct xfs_log_item *lip;
__uint64_t rui_id;
struct xfs_ail_cursor cur;
struct xfs_ail *ailp = log->l_ailp;
rud_formatp = item->ri_buf[0].i_addr;
ASSERT(item->ri_buf[0].i_len == sizeof(struct xfs_rud_log_format));
rui_id = rud_formatp->rud_rui_id;
/*
* Search for the RUI with the id in the RUD format structure in the
* AIL.
*/
spin_lock(&ailp->xa_lock);
lip = xfs_trans_ail_cursor_first(ailp, &cur, 0);
while (lip != NULL) {
if (lip->li_type == XFS_LI_RUI) {
ruip = (struct xfs_rui_log_item *)lip;
if (ruip->rui_format.rui_id == rui_id) {
/*
* Drop the RUD reference to the RUI. This
* removes the RUI from the AIL and frees it.
*/
spin_unlock(&ailp->xa_lock);
xfs_rui_release(ruip);
spin_lock(&ailp->xa_lock);
break;
}
}
lip = xfs_trans_ail_cursor_next(ailp, &cur);
}
xfs_trans_ail_cursor_done(&cur);
spin_unlock(&ailp->xa_lock);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 194 | 100.00% | 1 | 100.00% |
| Total | 194 | 100.00% | 1 | 100.00% |
/*
* Copy an CUI format buffer from the given buf, and into the destination
* CUI format structure. The CUI/CUD items were designed not to need any
* special alignment handling.
*/
static int
xfs_cui_copy_format(
struct xfs_log_iovec *buf,
struct xfs_cui_log_format *dst_cui_fmt)
{
struct xfs_cui_log_format *src_cui_fmt;
uint len;
src_cui_fmt = buf->i_addr;
len = xfs_cui_log_format_sizeof(src_cui_fmt->cui_nextents);
if (buf->i_len == len) {
memcpy(dst_cui_fmt, src_cui_fmt, len);
return 0;
}
return -EFSCORRUPTED;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 65 | 100.00% | 1 | 100.00% |
| Total | 65 | 100.00% | 1 | 100.00% |
/*
* This routine is called to create an in-core extent refcount update
* item from the cui format structure which was logged on disk.
* It allocates an in-core cui, copies the extents from the format
* structure into it, and adds the cui to the AIL with the given
* LSN.
*/
STATIC int
xlog_recover_cui_pass2(
struct xlog *log,
struct xlog_recover_item *item,
xfs_lsn_t lsn)
{
int error;
struct xfs_mount *mp = log->l_mp;
struct xfs_cui_log_item *cuip;
struct xfs_cui_log_format *cui_formatp;
cui_formatp = item->ri_buf[0].i_addr;
cuip = xfs_cui_init(mp, cui_formatp->cui_nextents);
error = xfs_cui_copy_format(&item->ri_buf[0], &cuip->cui_format);
if (error) {
xfs_cui_item_free(cuip);
return error;
}
atomic_set(&cuip->cui_next_extent, cui_formatp->cui_nextents);
spin_lock(&log->l_ailp->xa_lock);
/*
* The CUI has two references. One for the CUD and one for CUI to ensure
* it makes it into the AIL. Insert the CUI into the AIL directly and
* drop the CUI reference. Note that xfs_trans_ail_update() drops the
* AIL lock.
*/
xfs_trans_ail_update(log->l_ailp, &cuip->cui_item, lsn);
xfs_cui_release(cuip);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 69 | 49.29% | 1 | 11.11% |
| Christoph Hellwig | 42 | 30.00% | 4 | 44.44% |
| Dave Chinner | 25 | 17.86% | 1 | 11.11% |
| Mark Tinguely | 2 | 1.43% | 1 | 11.11% |
| Brian Foster | 1 | 0.71% | 1 | 11.11% |
| Nathan Scott | 1 | 0.71% | 1 | 11.11% |
| Total | 140 | 100.00% | 9 | 100.00% |
/*
* This routine is called when an CUD format structure is found in a committed
* transaction in the log. Its purpose is to cancel the corresponding CUI if it
* was still in the log. To do this it searches the AIL for the CUI with an id
* equal to that in the CUD format structure. If we find it we drop the CUD
* reference, which removes the CUI from the AIL and frees it.
*/
STATIC int
xlog_recover_cud_pass2(
struct xlog *log,
struct xlog_recover_item *item)
{
struct xfs_cud_log_format *cud_formatp;
struct xfs_cui_log_item *cuip = NULL;
struct xfs_log_item *lip;
__uint64_t cui_id;
struct xfs_ail_cursor cur;
struct xfs_ail *ailp = log->l_ailp;
cud_formatp = item->ri_buf[0].i_addr;
if (item->ri_buf[0].i_len != sizeof(struct xfs_cud_log_format))
return -EFSCORRUPTED;
cui_id = cud_formatp->cud_cui_id;
/*
* Search for the CUI with the id in the CUD format structure in the
* AIL.
*/
spin_lock(&ailp->xa_lock);
lip = xfs_trans_ail_cursor_first(ailp, &cur, 0);
while (lip != NULL) {
if (lip->li_type == XFS_LI_CUI) {
cuip = (struct xfs_cui_log_item *)lip;
if (cuip->cui_format.cui_id == cui_id) {
/*
* Drop the CUD reference to the CUI. This
* removes the CUI from the AIL and frees it.
*/
spin_unlock(&ailp->xa_lock);
xfs_cui_release(cuip);
spin_lock(&ailp->xa_lock);
break;
}
}
lip = xfs_trans_ail_cursor_next(ailp, &cur);
}
xfs_trans_ail_cursor_done(&cur);
spin_unlock(&ailp->xa_lock);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 197 | 100.00% | 1 | 100.00% |
| Total | 197 | 100.00% | 1 | 100.00% |
/*
* Copy an BUI format buffer from the given buf, and into the destination
* BUI format structure. The BUI/BUD items were designed not to need any
* special alignment handling.
*/
static int
xfs_bui_copy_format(
struct xfs_log_iovec *buf,
struct xfs_bui_log_format *dst_bui_fmt)
{
struct xfs_bui_log_format *src_bui_fmt;
uint len;
src_bui_fmt = buf->i_addr;
len = xfs_bui_log_format_sizeof(src_bui_fmt->bui_nextents);
if (buf->i_len == len) {
memcpy(dst_bui_fmt, src_bui_fmt, len);
return 0;
}
return -EFSCORRUPTED;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 65 | 100.00% | 1 | 100.00% |
| Total | 65 | 100.00% | 1 | 100.00% |
/*
* This routine is called to create an in-core extent bmap update
* item from the bui format structure which was logged on disk.
* It allocates an in-core bui, copies the extents from the format
* structure into it, and adds the bui to the AIL with the given
* LSN.
*/
STATIC int
xlog_recover_bui_pass2(
struct xlog *log,
struct xlog_recover_item *item,
xfs_lsn_t lsn)
{
int error;
struct xfs_mount *mp = log->l_mp;
struct xfs_bui_log_item *buip;
struct xfs_bui_log_format *bui_formatp;
bui_formatp = item->ri_buf[0].i_addr;
if (bui_formatp->bui_nextents != XFS_BUI_MAX_FAST_EXTENTS)
return -EFSCORRUPTED;
buip = xfs_bui_init(mp);
error = xfs_bui_copy_format(&item->ri_buf[0], &buip->bui_format);
if (error) {
xfs_bui_item_free(buip);
return error;
}
atomic_set(&buip->bui_next_extent, bui_formatp->bui_nextents);
spin_lock(&log->l_ailp->xa_lock);
/*
* The RUI has two references. One for the RUD and one for RUI to ensure
* it makes it into the AIL. Insert the RUI into the AIL directly and
* drop the RUI reference. Note that xfs_trans_ail_update() drops the
* AIL lock.
*/
xfs_trans_ail_update(log->l_ailp, &buip->bui_item, lsn);
xfs_bui_release(buip);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 144 | 97.30% | 2 | 50.00% |
| Dave Chinner | 2 | 1.35% | 1 | 25.00% |
| Christoph Hellwig | 2 | 1.35% | 1 | 25.00% |
| Total | 148 | 100.00% | 4 | 100.00% |
/*
* This routine is called when an BUD format structure is found in a committed
* transaction in the log. Its purpose is to cancel the corresponding BUI if it
* was still in the log. To do this it searches the AIL for the BUI with an id
* equal to that in the BUD format structure. If we find it we drop the BUD
* reference, which removes the BUI from the AIL and frees it.
*/
STATIC int
xlog_recover_bud_pass2(
struct xlog *log,
struct xlog_recover_item *item)
{
struct xfs_bud_log_format *bud_formatp;
struct xfs_bui_log_item *buip = NULL;
struct xfs_log_item *lip;
__uint64_t bui_id;
struct xfs_ail_cursor cur;
struct xfs_ail *ailp = log->l_ailp;
bud_formatp = item->ri_buf[0].i_addr;
if (item->ri_buf[0].i_len != sizeof(struct xfs_bud_log_format))
return -EFSCORRUPTED;
bui_id = bud_formatp->bud_bui_id;
/*
* Search for the BUI with the id in the BUD format structure in the
* AIL.
*/
spin_lock(&ailp->xa_lock);
lip = xfs_trans_ail_cursor_first(ailp, &cur, 0);
while (lip != NULL) {
if (lip->li_type == XFS_LI_BUI) {
buip = (struct xfs_bui_log_item *)lip;
if (buip->bui_format.bui_id == bui_id) {
/*
* Drop the BUD reference to the BUI. This
* removes the BUI from the AIL and frees it.
*/
spin_unlock(&ailp->xa_lock);
xfs_bui_release(buip);
spin_lock(&ailp->xa_lock);
break;
}
}
lip = xfs_trans_ail_cursor_next(ailp, &cur);
}
xfs_trans_ail_cursor_done(&cur);
spin_unlock(&ailp->xa_lock);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 197 | 100.00% | 1 | 100.00% |
| Total | 197 | 100.00% | 1 | 100.00% |
/*
* This routine is called when an inode create format structure is found in a
* committed transaction in the log. It's purpose is to initialise the inodes
* being allocated on disk. This requires us to get inode cluster buffers that
* match the range to be intialised, stamped with inode templates and written
* by delayed write so that subsequent modifications will hit the cached buffer
* and only need writing out at the end of recovery.
*/
STATIC int
xlog_recover_do_icreate_pass2(
struct xlog *log,
struct list_head *buffer_list,
xlog_recover_item_t *item)
{
struct xfs_mount *mp = log->l_mp;
struct xfs_icreate_log *icl;
xfs_agnumber_t agno;
xfs_agblock_t agbno;
unsigned int count;
unsigned int isize;
xfs_agblock_t length;
int blks_per_cluster;
int bb_per_cluster;
int cancel_count;
int nbufs;
int i;
icl = (struct xfs_icreate_log *)item->ri_buf[0].i_addr;
if (icl->icl_type != XFS_LI_ICREATE) {
xfs_warn(log->l_mp, "xlog_recover_do_icreate_trans: bad type");
return -EINVAL;
}
if (icl->icl_size != 1) {
xfs_warn(log->l_mp, "xlog_recover_do_icreate_trans: bad icl size");
return -EINVAL;
}
agno = be32_to_cpu(icl->icl_ag);
if (agno >= mp->m_sb.sb_agcount) {
xfs_warn(log->l_mp, "xlog_recover_do_icreate_trans: bad agno");
return -EINVAL;
}
agbno = be32_to_cpu(icl->icl_agbno);
if (!agbno || agbno == NULLAGBLOCK || agbno >= mp->m_sb.sb_agblocks) {
xfs_warn(log->l_mp, "xlog_recover_do_icreate_trans: bad agbno");
return -EINVAL;
}
isize = be32_to_cpu(icl->icl_isize);
if (isize != mp->m_sb.sb_inodesize) {
xfs_warn(log->l_mp, "xlog_recover_do_icreate_trans: bad isize");
return -EINVAL;
}
count = be32_to_cpu(icl->icl_count);
if (!count) {
xfs_warn(log->l_mp, "xlog_recover_do_icreate_trans: bad count");
return -EINVAL;
}
length = be32_to_cpu(icl->icl_length);
if (!length || length >= mp->m_sb.sb_agblocks) {
xfs_warn(log->l_mp, "xlog_recover_do_icreate_trans: bad length");
return -EINVAL;
}
/*
* The inode chunk is either full or sparse and we only support
* m_ialloc_min_blks sized sparse allocations at this time.
*/
if (length != mp->m_ialloc_blks &&
length != mp->m_ialloc_min_blks) {
xfs_warn(log->l_mp,
"%s: unsupported chunk length", __FUNCTION__);
return -EINVAL;
}
/* verify inode count is consistent with extent length */
if ((count >> mp->m_sb.sb_inopblog) != length) {
xfs_warn(log->l_mp,
"%s: inconsistent inode count and chunk length",
__FUNCTION__);
return -EINVAL;
}
/*
* The icreate transaction can cover multiple cluster buffers and these
* buffers could have been freed and reused. Check the individual
* buffers for cancellation so we don't overwrite anything written after
* a cancellation.
*/
blks_per_cluster = xfs_icluster_size_fsb(mp);
bb_per_cluster = XFS_FSB_TO_BB(mp, blks_per_cluster);
nbufs = length / blks_per_cluster;
for (i = 0, cancel_count = 0; i < nbufs; i++) {
xfs_daddr_t daddr;
daddr = XFS_AGB_TO_DADDR(mp, agno,
agbno + i * blks_per_cluster);
if (xlog_check_buffer_cancelled(log, daddr, bb_per_cluster, 0))
cancel_count++;
}
/*
* We currently only use icreate for a single allocation at a time. This
* means we should expect either all or none of the buffers to be
* cancelled. Be conservative and skip replay if at least one buffer is
* cancelled, but warn the user that something is awry if the buffers
* are not consistent.
*
* XXX: This must be refined to only skip cancelled clusters once we use
* icreate for multiple chunk allocations.
*/
ASSERT(!cancel_count || cancel_count == nbufs);
if (cancel_count) {
if (cancel_count != nbufs)
xfs_warn(mp,
"WARNING: partial inode chunk cancellation, skipped icreate.");
trace_xfs_log_recover_icreate_cancel(log, icl);
return 0;
}
trace_xfs_log_recover_icreate_recover(log, icl);
return xfs_ialloc_inode_init(mp, NULL, buffer_list, count, agno, agbno,
length, be32_to_cpu(icl->icl_gen));
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 229 | 44.47% | 1 | 6.25% |
| Brian Foster | 144 | 27.96% | 4 | 25.00% |
| Dave Chinner | 83 | 16.12% | 5 | 31.25% |
| Christoph Hellwig | 59 | 11.46% | 6 | 37.50% |
| Total | 515 | 100.00% | 16 | 100.00% |
STATIC void
xlog_recover_buffer_ra_pass2(
struct xlog *log,
struct xlog_recover_item *item)
{
struct xfs_buf_log_format *buf_f = item->ri_buf[0].i_addr;
struct xfs_mount *mp = log->l_mp;
if (xlog_peek_buffer_cancelled(log, buf_f->blf_blkno,
buf_f->blf_len, buf_f->blf_flags)) {
return;
}
xfs_buf_readahead(mp->m_ddev_targp, buf_f->blf_blkno,
buf_f->blf_len, NULL);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 63 | 80.77% | 3 | 33.33% |
| Christoph Hellwig | 8 | 10.26% | 4 | 44.44% |
| Timothy Shimmin | 6 | 7.69% | 1 | 11.11% |
| Nathan Scott | 1 | 1.28% | 1 | 11.11% |
| Total | 78 | 100.00% | 9 | 100.00% |
STATIC void
xlog_recover_inode_ra_pass2(
struct xlog *log,
struct xlog_recover_item *item)
{
struct xfs_inode_log_format ilf_buf;
struct xfs_inode_log_format *ilfp;
struct xfs_mount *mp = log->l_mp;
int error;
if (item->ri_buf[0].i_len == sizeof(struct xfs_inode_log_format)) {
ilfp = item->ri_buf[0].i_addr;
} else {
ilfp = &ilf_buf;
memset(ilfp, 0, sizeof(*ilfp));
error = xfs_inode_item_format_convert(&item->ri_buf[0], ilfp);
if (error)
return;
}
if (xlog_peek_buffer_cancelled(log, ilfp->ilf_blkno, ilfp->ilf_len, 0))
return;
xfs_buf_readahead(mp->m_ddev_targp, ilfp->ilf_blkno,
ilfp->ilf_len, &xfs_inode_buf_ra_ops);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 77 | 53.47% | 3 | 30.00% |
| Christoph Hellwig | 53 | 36.81% | 2 | 20.00% |
| Timothy Shimmin | 4 | 2.78% | 1 | 10.00% |
| Nathan Scott | 4 | 2.78% | 1 | 10.00% |
| Mark Tinguely | 4 | 2.78% | 1 | 10.00% |
| David Chinner | 2 | 1.39% | 2 | 20.00% |
| Total | 144 | 100.00% | 10 | 100.00% |
STATIC void
xlog_recover_dquot_ra_pass2(
struct xlog *log,
struct xlog_recover_item *item)
{
struct xfs_mount *mp = log->l_mp;
struct xfs_disk_dquot *recddq;
struct xfs_dq_logformat *dq_f;
uint type;
int len;
if (mp->m_qflags == 0)
return;
recddq = item->ri_buf[1].i_addr;
if (recddq == NULL)
return;
if (item->ri_buf[1].i_len < sizeof(struct xfs_disk_dquot))
return;
type = recddq->d_flags & (XFS_DQ_USER | XFS_DQ_PROJ | XFS_DQ_GROUP);
ASSERT(type);
if (log->l_quotaoffs_flag & type)
return;
dq_f = item->ri_buf[0].i_addr;
ASSERT(dq_f);
ASSERT(dq_f->qlf_len == 1);
len = XFS_FSB_TO_BB(mp, dq_f->qlf_len);
if (xlog_peek_buffer_cancelled(log, dq_f->qlf_blkno, len, 0))
return;
xfs_buf_readahead(mp->m_ddev_targp, dq_f->qlf_blkno, len,
&xfs_dquot_buf_ra_ops);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 124 | 68.13% | 4 | 40.00% |
| Dave Chinner | 50 | 27.47% | 2 | 20.00% |
| Mark Tinguely | 3 | 1.65% | 1 | 10.00% |
| Timothy Shimmin | 2 | 1.10% | 1 | 10.00% |
| Nathan Scott | 2 | 1.10% | 1 | 10.00% |
| David Chinner | 1 | 0.55% | 1 | 10.00% |
| Total | 182 | 100.00% | 10 | 100.00% |
STATIC void
xlog_recover_ra_pass2(
struct xlog *log,
struct xlog_recover_item *item)
{
switch (ITEM_TYPE(item)) {
case XFS_LI_BUF:
xlog_recover_buffer_ra_pass2(log, item);
break;
case XFS_LI_INODE:
xlog_recover_inode_ra_pass2(log, item);
break;
case XFS_LI_DQUOT:
xlog_recover_dquot_ra_pass2(log, item);
break;
case XFS_LI_EFI:
case XFS_LI_EFD:
case XFS_LI_QUOTAOFF:
case XFS_LI_RUI:
case XFS_LI_RUD:
case XFS_LI_CUI:
case XFS_LI_CUD:
case XFS_LI_BUI:
case XFS_LI_BUD:
default:
break;
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 37 | 42.53% | 2 | 18.18% |
| Christoph Hellwig | 19 | 21.84% | 1 | 9.09% |
| Darrick J. Wong | 18 | 20.69% | 3 | 27.27% |
| David Chinner | 5 | 5.75% | 3 | 27.27% |
| Timothy Shimmin | 4 | 4.60% | 1 | 9.09% |
| Mark Tinguely | 4 | 4.60% | 1 | 9.09% |
| Total | 87 | 100.00% | 11 | 100.00% |
STATIC int
xlog_recover_commit_pass1(
struct xlog *log,
struct xlog_recover *trans,
struct xlog_recover_item *item)
{
trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS1);
switch (ITEM_TYPE(item)) {
case XFS_LI_BUF:
return xlog_recover_buffer_pass1(log, item);
case XFS_LI_QUOTAOFF:
return xlog_recover_quotaoff_pass1(log, item);
case XFS_LI_INODE:
case XFS_LI_EFI:
case XFS_LI_EFD:
case XFS_LI_DQUOT:
case XFS_LI_ICREATE:
case XFS_LI_RUI:
case XFS_LI_RUD:
case XFS_LI_CUI:
case XFS_LI_CUD:
case XFS_LI_BUI:
case XFS_LI_BUD:
/* nothing to do in pass 1 */
return 0;
default:
xfs_warn(log->l_mp, "%s: invalid item type (%d)",
__func__, ITEM_TYPE(item));
ASSERT(0);
return -EIO;
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 55 | 43.65% | 2 | 18.18% |
| David Chinner | 22 | 17.46% | 2 | 18.18% |
| Christoph Hellwig | 21 | 16.67% | 2 | 18.18% |
| Darrick J. Wong | 18 | 14.29% | 3 | 27.27% |
| Timothy Shimmin | 6 | 4.76% | 1 | 9.09% |
| Mark Tinguely | 4 | 3.17% | 1 | 9.09% |
| Total | 126 | 100.00% | 11 | 100.00% |
STATIC int
xlog_recover_commit_pass2(
struct xlog *log,
struct xlog_recover *trans,
struct list_head *buffer_list,
struct xlog_recover_item *item)
{
trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS2);
switch (ITEM_TYPE(item)) {
case XFS_LI_BUF:
return xlog_recover_buffer_pass2(log, buffer_list, item,
trans->r_lsn);
case XFS_LI_INODE:
return xlog_recover_inode_pass2(log, buffer_list, item,
trans->r_lsn);
case XFS_LI_EFI:
return xlog_recover_efi_pass2(log, item, trans->r_lsn);
case XFS_LI_EFD:
return xlog_recover_efd_pass2(log, item);
case XFS_LI_RUI:
return xlog_recover_rui_pass2(log, item, trans->r_lsn);
case XFS_LI_RUD:
return xlog_recover_rud_pass2(log, item);
case XFS_LI_CUI:
return xlog_recover_cui_pass2(log, item, trans->r_lsn);
case XFS_LI_CUD:
return xlog_recover_cud_pass2(log, item);
case XFS_LI_BUI:
return xlog_recover_bui_pass2(log, item, trans->r_lsn);
case XFS_LI_BUD:
return xlog_recover_bud_pass2(log, item);
case XFS_LI_DQUOT:
return xlog_recover_dquot_pass2(log, buffer_list, item,
trans->r_lsn);
case XFS_LI_ICREATE:
return xlog_recover_do_icreate_pass2(log, buffer_list, item);
case XFS_LI_QUOTAOFF:
/* nothing to do in pass2 */
return 0;
default:
xfs_warn(log->l_mp, "%s: invalid item type (%d)",
__func__, ITEM_TYPE(item));
ASSERT(0);
return -EIO;
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 110 | 44.53% | 2 | 15.38% |
| Darrick J. Wong | 78 | 31.58% | 3 | 23.08% |
| David Chinner | 32 | 12.96% | 5 | 38.46% |
| Christoph Hellwig | 27 | 10.93% | 3 | 23.08% |
| Total | 247 | 100.00% | 13 | 100.00% |
STATIC int
xlog_recover_items_pass2(
struct xlog *log,
struct xlog_recover *trans,
struct list_head *buffer_list,
struct list_head *item_list)
{
struct xlog_recover_item *item;
int error = 0;
list_for_each_entry(item, item_list, ri_list) {
error = xlog_recover_commit_pass2(log, trans,
buffer_list, item);
if (error)
return error;
}
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| David Chinner | 39 | 56.52% | 1 | 33.33% |
| Dave Chinner | 23 | 33.33% | 1 | 33.33% |
| Zhi Yong Wu | 7 | 10.14% | 1 | 33.33% |
| Total | 69 | 100.00% | 3 | 100.00% |
/*
* Perform the transaction.
*
* If the transaction modifies a buffer or inode, do it now. Otherwise,
* EFIs and EFDs get queued up by adding entries into the AIL for them.
*/
STATIC int
xlog_recover_commit_trans(
struct xlog *log,
struct xlog_recover *trans,
int pass,
struct list_head *buffer_list)
{
int error = 0;
int items_queued = 0;
struct xlog_recover_item *item;
struct xlog_recover_item *next;
LIST_HEAD (ra_list);
LIST_HEAD (done_list);
#define XLOG_RECOVER_COMMIT_QUEUE_MAX 100
hlist_del(&trans->r_list);
error = xlog_recover_reorder_trans(log, trans, pass);
if (error)
return error;
list_for_each_entry_safe(item, next, &trans->r_itemq, ri_list) {
switch (pass) {
case XLOG_RECOVER_PASS1:
error = xlog_recover_commit_pass1(log, trans, item);
break;
case XLOG_RECOVER_PASS2:
xlog_recover_ra_pass2(log, item);
list_move_tail(&item->ri_list, &ra_list);
items_queued++;
if (items_queued >= XLOG_RECOVER_COMMIT_QUEUE_MAX) {
error = xlog_recover_items_pass2(log, trans,
buffer_list, &ra_list);
list_splice_tail_init(&ra_list, &done_list);
items_queued = 0;
}
break;
default:
ASSERT(0);
}
if (error)
goto out;
}
out:
if (!list_empty(&ra_list)) {
if (!error)
error = xlog_recover_items_pass2(log, trans,
buffer_list, &ra_list);
list_splice_tail_init(&ra_list, &done_list);
}
if (!list_empty(&done_list))
list_splice_init(&done_list, &trans->r_itemq);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 144 | 56.69% | 1 | 14.29% |
| Zhi Yong Wu | 49 | 19.29% | 1 | 14.29% |
| David Chinner | 41 | 16.14% | 2 | 28.57% |
| Christoph Hellwig | 15 | 5.91% | 2 | 28.57% |
| Brian Foster | 5 | 1.97% | 1 | 14.29% |
| Total | 254 | 100.00% | 7 | 100.00% |
STATIC void
xlog_recover_add_item(
struct list_head *head)
{
xlog_recover_item_t *item;
item = kmem_zalloc(sizeof(xlog_recover_item_t), KM_SLEEP);
INIT_LIST_HEAD(&item->ri_list);
list_add_tail(&item->ri_list, head);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 24 | 53.33% | 1 | 50.00% |
| Zhi Yong Wu | 21 | 46.67% | 1 | 50.00% |
| Total | 45 | 100.00% | 2 | 100.00% |
STATIC int
xlog_recover_add_to_cont_trans(
struct xlog *log,
struct xlog_recover *trans,
char *dp,
int len)
{
xlog_recover_item_t *item;
char *ptr, *old_ptr;
int old_len;
/*
* If the transaction is empty, the header was split across this and the
* previous record. Copy the rest of the header.
*/
if (list_empty(&trans->r_itemq)) {
ASSERT(len <= sizeof(struct xfs_trans_header));
if (len > sizeof(struct xfs_trans_header)) {
xfs_warn(log->l_mp, "%s: bad header length", __func__);
return -EIO;
}
xlog_recover_add_item(&trans->r_itemq);
ptr = (char *)&trans->r_theader +
sizeof(struct xfs_trans_header) - len;
memcpy(ptr, dp, len);
return 0;
}
/* take the tail entry */
item = list_entry(trans->r_itemq.prev, xlog_recover_item_t, ri_list);
old_ptr = item->ri_buf[item->ri_cnt-1].i_addr;
old_len = item->ri_buf[item->ri_cnt-1].i_len;
ptr = kmem_realloc(old_ptr, len + old_len, KM_SLEEP);
memcpy(&ptr[old_len], dp, len);
item->ri_buf[item->ri_cnt-1].i_len += len;
item->ri_buf[item->ri_cnt-1].i_addr = ptr;
trace_xfs_log_recover_item_add_cont(log, trans, item, 0);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 124 | 51.03% | 2 | 33.33% |
| Zhi Yong Wu | 71 | 29.22% | 1 | 16.67% |
| Brian Foster | 41 | 16.87% | 2 | 33.33% |
| Christoph Hellwig | 7 | 2.88% | 1 | 16.67% |
| Total | 243 | 100.00% | 6 | 100.00% |
/*
* The next region to add is the start of a new region. It could be
* a whole region or it could be the first part of a new region. Because
* of this, the assumption here is that the type and size fields of all
* format structures fit into the first 32 bits of the structure.
*
* This works because all regions must be 32 bit aligned. Therefore, we
* either have both fields or we have neither field. In the case we have
* neither field, the data part of the region is zero length. We only have
* a log_op_header and can throw away the header since a new one will appear
* later. If we have at least 4 bytes, then we can determine how many regions
* will appear in the current log item.
*/
STATIC int
xlog_recover_add_to_trans(
struct xlog *log,
struct xlog_recover *trans,
char *dp,
int len)
{
xfs_inode_log_format_t *in_f; /* any will do */
xlog_recover_item_t *item;
char *ptr;
if (!len)
return 0;
if (list_empty(&trans->r_itemq)) {
/* we need to catch log corruptions here */
if (*(uint *)dp != XFS_TRANS_HEADER_MAGIC) {
xfs_warn(log->l_mp, "%s: bad header magic number",
__func__);
ASSERT(0);
return -EIO;
}
if (len > sizeof(struct xfs_trans_header)) {
xfs_warn(log->l_mp, "%s: bad header length", __func__);
ASSERT(0);
return -EIO;
}
/*
* The transaction header can be arbitrarily split across op
* records. If we don't have the whole thing here, copy what we
* do have and handle the rest in the next record.
*/
if (len == sizeof(struct xfs_trans_header))
xlog_recover_add_item(&trans->r_itemq);
memcpy(&trans->r_theader, dp, len);
return 0;
}
ptr = kmem_alloc(len, KM_SLEEP);
memcpy(ptr, dp, len);
in_f = (xfs_inode_log_format_t *)ptr;
/* take the tail entry */
item = list_entry(trans->r_itemq.prev, xlog_recover_item_t, ri_list);
if (item->ri_total != 0 &&
item->ri_total == item->ri_cnt) {
/* tail item is in use, get a new one */
xlog_recover_add_item(&trans->r_itemq);
item = list_entry(trans->r_itemq.prev,
xlog_recover_item_t, ri_list);
}
if (item->ri_total == 0) { /* first region to be added */
if (in_f->ilf_size == 0 ||
in_f->ilf_size > XLOG_MAX_REGIONS_IN_ITEM) {
xfs_warn(log->l_mp,
"bad number of regions (%d) in inode log format",
in_f->ilf_size);
ASSERT(0);
kmem_free(ptr);
return -EIO;
}
item->ri_total = in_f->ilf_size;
item->ri_buf =
kmem_zalloc(item->ri_total * sizeof(xfs_log_iovec_t),
KM_SLEEP);
}
ASSERT(item->ri_total > item->ri_cnt);
/* Description region is ri_buf[0] */
item->ri_buf[item->ri_cnt].i_addr = ptr;
item->ri_buf[item->ri_cnt].i_len = len;
item->ri_cnt++;
trace_xfs_log_recover_item_add(log, trans, item, 0);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 228 | 60.48% | 5 | 33.33% |
| Christoph Hellwig | 76 | 20.16% | 6 | 40.00% |
| Brian Foster | 35 | 9.28% | 1 | 6.67% |
| Zhi Yong Wu | 34 | 9.02% | 1 | 6.67% |
| David Chinner | 4 | 1.06% | 2 | 13.33% |
| Total | 377 | 100.00% | 15 | 100.00% |
/*
* Free up any resources allocated by the transaction
*
* Remember that EFIs, EFDs, and IUNLINKs are handled later.
*/
STATIC void
xlog_recover_free_trans(
struct xlog_recover *trans)
{
xlog_recover_item_t *item, *n;
int i;
list_for_each_entry_safe(item, n, &trans->r_itemq, ri_list) {
/* Free the regions in the item. */
list_del(&item->ri_list);
for (i = 0; i < item->ri_cnt; i++)
kmem_free(item->ri_buf[i].i_addr);
/* Free the item itself */
kmem_free(item->ri_buf);
kmem_free(item);
}
/* Free the transaction recover structure */
kmem_free(trans);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Zhi Yong Wu | 40 | 45.45% | 1 | 20.00% |
| Dave Chinner | 40 | 45.45% | 1 | 20.00% |
| Christoph Hellwig | 8 | 9.09% | 3 | 60.00% |
| Total | 88 | 100.00% | 5 | 100.00% |
/*
* On error or completion, trans is freed.
*/
STATIC int
xlog_recovery_process_trans(
struct xlog *log,
struct xlog_recover *trans,
char *dp,
unsigned int len,
unsigned int flags,
int pass,
struct list_head *buffer_list)
{
int error = 0;
bool freeit = false;
/* mask off ophdr transaction container flags */
flags &= ~XLOG_END_TRANS;
if (flags & XLOG_WAS_CONT_TRANS)
flags &= ~XLOG_CONTINUE_TRANS;
/*
* Callees must not free the trans structure. We'll decide if we need to
* free it or not based on the operation being done and it's result.
*/
switch (flags) {
/* expected flag values */
case 0:
case XLOG_CONTINUE_TRANS:
error = xlog_recover_add_to_trans(log, trans, dp, len);
break;
case XLOG_WAS_CONT_TRANS:
error = xlog_recover_add_to_cont_trans(log, trans, dp, len);
break;
case XLOG_COMMIT_TRANS:
error = xlog_recover_commit_trans(log, trans, pass,
buffer_list);
/* success or fail, we are now done with this transaction. */
freeit = true;
break;
/* unexpected flag values */
case XLOG_UNMOUNT_TRANS:
/* just skip trans */
xfs_warn(log->l_mp, "%s: Unmount LR", __func__);
freeit = true;
break;
case XLOG_START_TRANS:
default:
xfs_warn(log->l_mp, "%s: bad flag 0x%x", __func__, flags);
ASSERT(0);
error = -EIO;
break;
}
if (error || freeit)
xlog_recover_free_trans(trans);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 94 | 48.70% | 4 | 30.77% |
| Christoph Hellwig | 78 | 40.41% | 5 | 38.46% |
| Zhi Yong Wu | 12 | 6.22% | 1 | 7.69% |
| Brian Foster | 7 | 3.63% | 1 | 7.69% |
| Nathan Scott | 1 | 0.52% | 1 | 7.69% |
| Mark Tinguely | 1 | 0.52% | 1 | 7.69% |
| Total | 193 | 100.00% | 13 | 100.00% |
/*
* Lookup the transaction recovery structure associated with the ID in the
* current ophdr. If the transaction doesn't exist and the start flag is set in
* the ophdr, then allocate a new transaction for future ID matches to find.
* Either way, return what we found during the lookup - an existing transaction
* or nothing.
*/
STATIC struct xlog_recover *
xlog_recover_ophdr_to_trans(
struct hlist_head rhash[],
struct xlog_rec_header *rhead,
struct xlog_op_header *ohead)
{
struct xlog_recover *trans;
xlog_tid_t tid;
struct hlist_head *rhp;
tid = be32_to_cpu(ohead->oh_tid);
rhp = &rhash[XLOG_RHASH(tid)];
hlist_for_each_entry(trans, rhp, r_list) {
if (trans->r_log_tid == tid)
return trans;
}
/*
* skip over non-start transaction headers - we could be
* processing slack space before the next transaction starts
*/
if (!(ohead->oh_flags & XLOG_START_TRANS))
return NULL;
ASSERT(be32_to_cpu(ohead->oh_len) == 0);
/*
* This is a new transaction so allocate a new recovery container to
* hold the recovery ops that will follow.
*/
trans = kmem_zalloc(sizeof(struct xlog_recover), KM_SLEEP);
trans->r_log_tid = tid;
trans->r_lsn = be64_to_cpu(rhead->h_lsn);
INIT_LIST_HEAD(&trans->r_itemq);
INIT_HLIST_NODE(&trans->r_list);
hlist_add_head(&trans->r_list, rhp);
/*
* Nothing more to do for this ophdr. Items to be added to this new
* transaction will be in subsequent ophdr containers.
*/
return NULL;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 101 | 61.21% | 3 | 37.50% |
| Christoph Hellwig | 40 | 24.24% | 4 | 50.00% |
| Zhi Yong Wu | 24 | 14.55% | 1 | 12.50% |
| Total | 165 | 100.00% | 8 | 100.00% |
STATIC int
xlog_recover_process_ophdr(
struct xlog *log,
struct hlist_head rhash[],
struct xlog_rec_header *rhead,
struct xlog_op_header *ohead,
char *dp,
char *end,
int pass,
struct list_head *buffer_list)
{
struct xlog_recover *trans;
unsigned int len;
int error;
/* Do we understand who wrote this op? */
if (ohead->oh_clientid != XFS_TRANSACTION &&
ohead->oh_clientid != XFS_LOG) {
xfs_warn(log->l_mp, "%s: bad clientid 0x%x",
__func__, ohead->oh_clientid);
ASSERT(0);
return -EIO;
}
/*
* Check the ophdr contains all the data it is supposed to contain.
*/
len = be32_to_cpu(ohead->oh_len);
if (dp + len > end) {
xfs_warn(log->l_mp, "%s: bad length 0x%x", __func__, len);
WARN_ON(1);
return -EIO;
}
trans = xlog_recover_ophdr_to_trans(rhash, rhead, ohead);
if (!trans) {
/* nothing to do, so skip over this ophdr */
return 0;
}
/*
* The recovered buffer queue is drained only once we know that all
* recovery items for the current LSN have been processed. This is
* required because:
*
* - Buffer write submission updates the metadata LSN of the buffer.
* - Log recovery skips items with a metadata LSN >= the current LSN of
* the recovery item.
* - Separate recovery items against the same metadata buffer can share
* a current LSN. I.e., consider that the LSN of a recovery item is
* defined as the starting LSN of the first record in which its
* transaction appears, that a record can hold multiple transactions,
* and/or that a transaction can span multiple records.
*
* In other words, we are allowed to submit a buffer from log recovery
* once per current LSN. Otherwise, we may incorrectly skip recovery
* items and cause corruption.
*
* We don't know up front whether buffers are updated multiple times per
* LSN. Therefore, track the current LSN of each commit log record as it
* is processed and drain the queue when it changes. Use commit records
* because they are ordered correctly by the logging code.
*/
if (log->l_recovery_lsn != trans->r_lsn &&
ohead->oh_flags & XLOG_COMMIT_TRANS) {
error = xfs_buf_delwri_submit(buffer_list);
if (error)
return error;
log->l_recovery_lsn = trans->r_lsn;
}
return xlog_recovery_process_trans(log, trans, dp, len,
ohead->oh_flags, pass, buffer_list);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 81 | 36.82% | 4 | 36.36% |
| Christoph Hellwig | 70 | 31.82% | 3 | 27.27% |
| Brian Foster | 51 | 23.18% | 1 | 9.09% |
| Lachlan McIlroy | 12 | 5.45% | 1 | 9.09% |
| Mark Tinguely | 4 | 1.82% | 1 | 9.09% |
| David Chinner | 2 | 0.91% | 1 | 9.09% |
| Total | 220 | 100.00% | 11 | 100.00% |
/*
* There are two valid states of the r_state field. 0 indicates that the
* transaction structure is in a normal state. We have either seen the
* start of the transaction or the last operation we added was not a partial
* operation. If the last operation we added to the transaction was a
* partial operation, we need to mark r_state with XLOG_WAS_CONT_TRANS.
*
* NOTE: skip LRs with 0 data length.
*/
STATIC int
xlog_recover_process_data(
struct xlog *log,
struct hlist_head rhash[],
struct xlog_rec_header *rhead,
char *dp,
int pass,
struct list_head *buffer_list)
{
struct xlog_op_header *ohead;
char *end;
int num_logops;
int error;
end = dp + be32_to_cpu(rhead->h_len);
num_logops = be32_to_cpu(rhead->h_num_logops);
/* check the log format matches our own - else we can't recover */
if (xlog_header_check_recover(log->l_mp, rhead))
return -EIO;
trace_xfs_log_recover_record(log, rhead, pass);
while ((dp < end) && num_logops) {
ohead = (struct xlog_op_header *)dp;
dp += sizeof(*ohead);
ASSERT(dp <= end);
/* errors will abort recovery */
error = xlog_recover_process_ophdr(log, rhash, rhead, ohead,
dp, end, pass, buffer_list);
if (error)
return error;
dp += be32_to_cpu(ohead->oh_len);
num_logops--;
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dave Chinner | 100 | 57.80% | 3 | 37.50% |
| Christoph Hellwig | 57 | 32.95% | 3 | 37.50% |
| Brian Foster | 16 | 9.25% | 2 | 25.00% |
| Total | 173 | 100.00% | 8 | 100.00% |
/* Recover the EFI if necessary. */
STATIC int
xlog_recover_process_efi(
struct xfs_mount *mp,
struct xfs_ail *ailp,
struct xfs_log_item *lip)
{
struct xfs_efi_log_item *efip;
int error;
/*
* Skip EFIs that we've already processed.
*/
efip = container_of(lip, struct xfs_efi_log_item, efi_item);
if (test_bit(XFS_EFI_RECOVERED, &efip->efi_flags))
return 0;
spin_unlock(&ailp->xa_lock);
error = xfs_efi_recover(mp, efip);
spin_lock(&ailp->xa_lock);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 35 | 41.18% | 1 | 16.67% |
| Christoph Hellwig | 32 | 37.65% | 1 | 16.67% |
| Dave Chinner | 8 | 9.41% | 1 | 16.67% |
| David Chinner | 8 | 9.41% | 2 | 33.33% |
| Jie Liu | 2 | 2.35% | 1 | 16.67% |
| Total | 85 | 100.00% | 6 | 100.00% |
/* Release the EFI since we're cancelling everything. */
STATIC void
xlog_recover_cancel_efi(
struct xfs_mount *mp,
struct xfs_ail *ailp,
struct xfs_log_item *lip)
{
struct xfs_efi_log_item *efip;
efip = container_of(lip, struct xfs_efi_log_item, efi_item);
spin_unlock(&ailp->xa_lock);
xfs_efi_release(efip);
spin_lock(&ailp->xa_lock);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 42 | 71.19% | 1 | 20.00% |
| Christoph Hellwig | 9 | 15.25% | 1 | 20.00% |
| David Chinner | 4 | 6.78% | 1 | 20.00% |
| Dave Chinner | 3 | 5.08% | 1 | 20.00% |
| Brian Foster | 1 | 1.69% | 1 | 20.00% |
| Total | 59 | 100.00% | 5 | 100.00% |
/* Recover the RUI if necessary. */
STATIC int
xlog_recover_process_rui(
struct xfs_mount *mp,
struct xfs_ail *ailp,
struct xfs_log_item *lip)
{
struct xfs_rui_log_item *ruip;
int error;
/*
* Skip RUIs that we've already processed.
*/
ruip = container_of(lip, struct xfs_rui_log_item, rui_item);
if (test_bit(XFS_RUI_RECOVERED, &ruip->rui_flags))
return 0;
spin_unlock(&ailp->xa_lock);
error = xfs_rui_recover(mp, ruip);
spin_lock(&ailp->xa_lock);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 85 | 100.00% | 1 | 100.00% |
| Total | 85 | 100.00% | 1 | 100.00% |
/* Release the RUI since we're cancelling everything. */
STATIC void
xlog_recover_cancel_rui(
struct xfs_mount *mp,
struct xfs_ail *ailp,
struct xfs_log_item *lip)
{
struct xfs_rui_log_item *ruip;
ruip = container_of(lip, struct xfs_rui_log_item, rui_item);
spin_unlock(&ailp->xa_lock);
xfs_rui_release(ruip);
spin_lock(&ailp->xa_lock);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 59 | 100.00% | 1 | 100.00% |
| Total | 59 | 100.00% | 1 | 100.00% |
/* Recover the CUI if necessary. */
STATIC int
xlog_recover_process_cui(
struct xfs_mount *mp,
struct xfs_ail *ailp,
struct xfs_log_item *lip)
{
struct xfs_cui_log_item *cuip;
int error;
/*
* Skip CUIs that we've already processed.
*/
cuip = container_of(lip, struct xfs_cui_log_item, cui_item);
if (test_bit(XFS_CUI_RECOVERED, &cuip->cui_flags))
return 0;
spin_unlock(&ailp->xa_lock);
error = xfs_cui_recover(mp, cuip);
spin_lock(&ailp->xa_lock);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 85 | 100.00% | 1 | 100.00% |
| Total | 85 | 100.00% | 1 | 100.00% |
/* Release the CUI since we're cancelling everything. */
STATIC void
xlog_recover_cancel_cui(
struct xfs_mount *mp,
struct xfs_ail *ailp,
struct xfs_log_item *lip)
{
struct xfs_cui_log_item *cuip;
cuip = container_of(lip, struct xfs_cui_log_item, cui_item);
spin_unlock(&ailp->xa_lock);
xfs_cui_release(cuip);
spin_lock(&ailp->xa_lock);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 59 | 100.00% | 1 | 100.00% |
| Total | 59 | 100.00% | 1 | 100.00% |
/* Recover the BUI if necessary. */
STATIC int
xlog_recover_process_bui(
struct xfs_mount *mp,
struct xfs_ail *ailp,
struct xfs_log_item *lip)
{
struct xfs_bui_log_item *buip;
int error;
/*
* Skip BUIs that we've already processed.
*/
buip = container_of(lip, struct xfs_bui_log_item, bui_item);
if (test_bit(XFS_BUI_RECOVERED, &buip->bui_flags))
return 0;
spin_unlock(&ailp->xa_lock);
error = xfs_bui_recover(mp, buip);
spin_lock(&ailp->xa_lock);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 85 | 100.00% | 1 | 100.00% |
| Total | 85 | 100.00% | 1 | 100.00% |
/* Release the BUI since we're cancelling everything. */
STATIC void
xlog_recover_cancel_bui(
struct xfs_mount *mp,
struct xfs_ail *ailp,
struct xfs_log_item *lip)
{
struct xfs_bui_log_item *buip;
buip = container_of(lip, struct xfs_bui_log_item, bui_item);
spin_unlock(&ailp->xa_lock);
xfs_bui_release(buip);
spin_lock(&ailp->xa_lock);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 59 | 100.00% | 1 | 100.00% |
| Total | 59 | 100.00% | 1 | 100.00% |
/* Is this log item a deferred action intent? */
static inline bool xlog_item_is_intent(struct xfs_log_item *lip)
{
switch (lip->li_type) {
case XFS_LI_EFI:
case XFS_LI_RUI:
case XFS_LI_CUI:
case XFS_LI_BUI:
return true;
default:
return false;
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 36 | 92.31% | 4 | 66.67% |
| David Chinner | 2 | 5.13% | 1 | 16.67% |
| Christoph Hellwig | 1 | 2.56% | 1 | 16.67% |
| Total | 39 | 100.00% | 6 | 100.00% |
/*
* When this is called, all of the log intent items which did not have
* corresponding log done items should be in the AIL. What we do now
* is update the data structures associated with each one.
*
* Since we process the log intent items in normal transactions, they
* will be removed at some point after the commit. This prevents us
* from just walking down the list processing each one. We'll use a
* flag in the intent item to skip those that we've already processed
* and use the AIL iteration mechanism's generation count to try to
* speed this up at least a bit.
*
* When we start, we know that the intents are the only things in the
* AIL. As we process them, however, other items are added to the
* AIL.
*/
STATIC int
xlog_recover_process_intents(
struct xlog *log)
{
struct xfs_log_item *lip;
int error = 0;
struct xfs_ail_cursor cur;
struct xfs_ail *ailp;
xfs_lsn_t last_lsn;
ailp = log->l_ailp;
spin_lock(&ailp->xa_lock);
lip = xfs_trans_ail_cursor_first(ailp, &cur, 0);
last_lsn = xlog_assign_lsn(log->l_curr_cycle, log->l_curr_block);
while (lip != NULL) {
/*
* We're done when we see something other than an intent.
* There should be no intents left in the AIL now.
*/
if (!xlog_item_is_intent(lip)) {
#ifdef DEBUG
for (; lip; lip = xfs_trans_ail_cursor_next(ailp, &cur))
ASSERT(!xlog_item_is_intent(lip));
#endif
break;
}
/*
* We should never see a redo item with a LSN higher than
* the last transaction we found in the log at the start
* of recovery.
*/
ASSERT(XFS_LSN_CMP(last_lsn, lip->li_lsn) >= 0);
switch (lip->li_type) {
case XFS_LI_EFI:
error = xlog_recover_process_efi(log->l_mp, ailp, lip);
break;
case XFS_LI_RUI:
error = xlog_recover_process_rui(log->l_mp, ailp, lip);
break;
case XFS_LI_CUI:
error = xlog_recover_process_cui(log->l_mp, ailp, lip);
break;
case XFS_LI_BUI:
error = xlog_recover_process_bui(log->l_mp, ailp, lip);
break;
}
if (error)
goto out;
lip = xfs_trans_ail_cursor_next(ailp, &cur);
}
out:
xfs_trans_ail_cursor_done(&cur);
spin_unlock(&ailp->xa_lock);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Darrick J. Wong | 98 | 39.52% | 4 | 28.57% |
| David Chinner | 80 | 32.26% | 5 | 35.71% |
| Christoph Hellwig | 58 | 23.39% | 1 | 7.14% |
| Donald Douwsma | 4 | 1.61% | 1 | 7.14% |
| Dave Chinner | 3 | 1.21% | 1 | 7.14% |
| Brian Foster | 3 | 1.21% | 1 | 7.14% |
| Mark Tinguely | 2 | 0.81% | 1 | 7.14% |
| Total | 248 | 100.00% | 14 | 100.00% |
/*
* A cancel occurs when the mount has failed and we're bailing out.
* Release all pending log intent items so they don't pin the AIL.
*/
STATIC int
xlog_recover_cancel_intents(
struct xlog *log)
{
struct xfs_log_item *lip;
int error = 0;
struct xfs_ail_cursor cur;
struct xfs_ail *ailp;
ailp = log->l_ailp;
spin_lock(&ailp->xa_lock);
lip = xfs_trans_ail_cursor_first(ailp, &cur, 0);
while (lip != NULL) {
/*
* We're done when we see something other than an intent.
* There should be no intents left in the AIL now.
*/
if (!xlog_item_is_intent(lip)) {
#ifdef DEBUG
for (; lip; lip = xfs_trans_ail_cursor_next(ailp, &cur))
ASSERT(!xlog_item_is_intent(lip));
#endif
break;
}
switch (lip->li_type) {
case XFS_LI_EFI:
xlog_recover_cancel_efi(log->l_mp, ailp, lip);
break;
case XFS_LI_RUI:
xlog_recover_cancel_rui(log->l_mp, ailp, lip);
break;
case XFS_LI_CUI:
xlog_recover_cancel_cui(log->l_mp, ailp, lip);
break;
case XFS_LI_BUI:
xlog_recover_cancel_bui(log->l_mp, ailp, lip);
break;
}
lip = xfs_trans_ail_cursor_next(ailp, &cur);
}
xfs_trans_ail_cursor_done(&cur);
spin_unlock(&ailp->xa_lock);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Brian Foster | 128 | 64.00% | 1 | 20.00% |
| Darrick J. Wong | 72 | 36.00% | 4 | 80.00% |
| Total | 200 | 100.00% | 5 | 100.00% |
/*
* This routine performs a transaction to null out a bad inode pointer
* in an agi unlinked inode hash bucket.
*/
STATIC void
xlog_recover_clear_agi_bucket(
xfs_mount_t *mp,
xfs_agnumber_t agno,
int bucket)
{
xfs_trans_t *tp;
xfs_agi_t *agi;
xfs_buf_t *agibp;
int offset;
int error;
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_clearagi, 0, 0, 0, &tp);
if (error)
goto out_error;
error = xfs_read_agi(mp, tp, agno, &agibp);
if (error)
goto out_abort;
agi = XFS_BUF_TO_AGI(agibp);
agi->agi_unlinked[bucket] = cpu_to_be32(NULLAGINO);
offset = offsetof(xfs_agi_t, agi_unlinked) +
(sizeof(xfs_agino_t) * bucket);
xfs_trans_log_buf(tp, agibp, offset,
(offset + sizeof(xfs_agino_t) - 1));
error = xfs_trans_commit(tp);
if (error)
goto out_error;
return;
out_abort:
xfs_trans_cancel(tp);
out_error:
xfs_warn(mp, "%s: failed to clear agi %d. Continuing.", __func__, agno);
return;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 135 | 75.42% | 4 | 44.44% |
| David Chinner | 34 | 18.99% | 2 | 22.22% |
| Dave Chinner | 4 | 2.23% | 1 | 11.11% |
| Jie Liu | 4 | 2.23% | 1 | 11.11% |
| Nathan Scott | 2 | 1.12% | 1 | 11.11% |
| Total | 179 | 100.00% | 9 | 100.00% |
STATIC xfs_agino_t
xlog_recover_process_one_iunlink(
struct xfs_mount *mp,
xfs_agnumber_t agno,
xfs_agino_t agino,
int bucket)
{
struct xfs_buf *ibp;
struct xfs_dinode *dip;
struct xfs_inode *ip;
xfs_ino_t ino;
int error;
ino = XFS_AGINO_TO_INO(mp, agno, agino);
error = xfs_iget(mp, NULL, ino, 0, 0, &ip);
if (error)
goto fail;
/*
* Get the on disk inode to find the next inode in the bucket.
*/
error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &ibp, 0, 0);
if (error)
goto fail_iput;
xfs_iflags_clear(ip, XFS_IRECOVERY);
ASSERT(VFS_I(ip)->i_nlink == 0);
ASSERT(VFS_I(ip)->i_mode != 0);
/* setup for the next pass */
agino = be32_to_cpu(dip->di_next_unlinked);
xfs_buf_relse(ibp);
/*
* Prevent any DMAPI event from being sent when the reference on
* the inode is dropped.
*/
ip->i_d.di_dmevmask = 0;
IRELE(ip);
return agino;
fail_iput:
IRELE(ip);
fail:
/*
* We can't read in the inode this bucket points to, or this inode
* is messed up. Just ditch this bucket of inodes. We will lose
* some inodes and space, but at least we won't hang.
*
* Call xlog_recover_clear_agi_bucket() to perform a transaction to
* clear the inode pointer in the bucket.
*/
xlog_recover_clear_agi_bucket(mp, agno, bucket);
return NULLAGINO;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 174 | 89.69% | 7 | 58.33% |
| Dave Chinner | 9 | 4.64% | 3 | 25.00% |
| Darrick J. Wong | 7 | 3.61% | 1 | 8.33% |
| Eric Sandeen | 4 | 2.06% | 1 | 8.33% |
| Total | 194 | 100.00% | 12 | 100.00% |
/*
* xlog_iunlink_recover
*
* This is called during recovery to process any inodes which
* we unlinked but not freed when the system crashed. These
* inodes will be on the lists in the AGI blocks. What we do
* here is scan all the AGIs and fully truncate and free any
* inodes found on the lists. Each inode is removed from the
* lists when it has been fully truncated and is freed. The
* freeing of the inode and its removal from the list must be
* atomic.
*/
STATIC void
xlog_recover_process_iunlinks(
struct xlog *log)
{
xfs_mount_t *mp;
xfs_agnumber_t agno;
xfs_agi_t *agi;
xfs_buf_t *agibp;
xfs_agino_t agino;
int bucket;
int error;
uint mp_dmevmask;
mp = log->l_mp;
/*
* Prevent any DMAPI event from being sent while in this function.
*/
mp_dmevmask = mp->m_dmevmask;
mp->m_dmevmask = 0;
for (agno = 0; agno < mp->m_sb.sb_agcount; agno++) {
/*
* Find the agi for this ag.
*/
error = xfs_read_agi(mp, NULL, agno, &agibp);
if (error) {
/*
* AGI is b0rked. Don't process it.
*
* We should probably mark the filesystem as corrupt
* after we've recovered all the ag's we can....
*/
continue;
}
/*
* Unlock the buffer so that it can be acquired in the normal
* course of the transaction to truncate and free each inode.
* Because we are not racing with anyone else here for the AGI
* buffer, we don't even need to hold it locked to read the
* initial unlinked bucket entries out of the buffer. We keep
* buffer reference though, so that it stays pinned in memory
* while we need the buffer.
*/
agi = XFS_BUF_TO_AGI(agibp);
xfs_buf_unlock(agibp);
for (bucket = 0; bucket < XFS_AGI_UNLINKED_BUCKETS; bucket++) {
agino = be32_to_cpu(agi->agi_unlinked[bucket]);
while (agino != NULLAGINO) {
agino = xlog_recover_process_one_iunlink(mp,
agno, agino, bucket);
}
}
xfs_buf_rele(agibp);
}
mp->m_dmevmask = mp_dmevmask;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 161 | 94.15% | 2 | 40.00% |
| Jan Kara | 7 | 4.09% | 1 | 20.00% |
| Mark Tinguely | 2 | 1.17% | 1 | 20.00% |
| Eric Sandeen | 1 | 0.58% | 1 | 20.00% |
| Total | 171 | 100.00% | 5 | 100.00% |
STATIC int
xlog_unpack_data(
struct xlog_rec_header *rhead,
char *dp,
struct xlog *log)
{
int i, j, k;
for (i = 0; i < BTOBB(be32_to_cpu(rhead->h_len)) &&
i < (XLOG_HEADER_CYCLE_SIZE / BBSIZE); i++) {
*(__be32 *)dp = *(__be32 *)&rhead->h_cycle_data[i];
dp += BBSIZE;
}
if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
xlog_in_core_2_t *xhdr = (xlog_in_core_2_t *)rhead;
for ( ; i < BTOBB(be32_to_cpu(rhead->h_len)); i++) {
j = i / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
k = i % (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
*(__be32 *)dp = xhdr[j].hic_xheader.xh_cycle_data[k];
dp += BBSIZE;
}
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Nathan Scott | 151 | 87.79% | 1 | 12.50% |
| Christoph Hellwig | 16 | 9.30% | 5 | 62.50% |
| Mark Tinguely | 4 | 2.33% | 1 | 12.50% |
| Eric Sandeen | 1 | 0.58% | 1 | 12.50% |
| Total | 172 | 100.00% | 8 | 100.00% |
/*
* CRC check, unpack and process a log record.
*/
STATIC int
xlog_recover_process(
struct xlog *log,
struct hlist_head rhash[],
struct xlog_rec_header *rhead,
char *dp,
int pass,
struct list_head *buffer_list)
{
int error;
__le32 old_crc = rhead->h_crc;
__le32 crc;
crc = xlog_cksum(log, rhead, dp, be32_to_cpu(rhead->h_len));
/*
* Nothing else to do if this is a CRC verification pass. Just return
* if this a record with a non-zero crc. Unfortunately, mkfs always
* sets old_crc to 0 so we must consider this valid even on v5 supers.
* Otherwise, return EFSBADCRC on failure so the callers up the stack
* know precisely what failed.
*/
if (pass == XLOG_RECOVER_CRCPASS) {
if (old_crc && crc != old_crc)
return -EFSBADCRC;
return 0;
}
/*
* We're in the normal recovery path. Issue a warning if and only if the
* CRC in the header is non-zero. This is an advisory warning and the
* zero CRC check prevents warnings from being emitted when upgrading
* the kernel from one that does not add CRCs by default.
*/
if (crc != old_crc) {
if (old_crc || xfs_sb_version_hascrc(&log->l_mp->m_sb)) {
xfs_alert(log->l_mp,
"log record CRC mismatch: found 0x%x, expected 0x%x.",
le32_to_cpu(old_crc),
le32_to_cpu(crc));
xfs_hex_dump(dp, 32);
}
/*
* If the filesystem is CRC enabled, this mismatch becomes a
* fatal log corruption failure.
*/
if (xfs_sb_version_hascrc(&log->l_mp->m_sb))
return -EFSCORRUPTED;
}
error = xlog_unpack_data(rhead, dp, log);
if (error)
return error;
return xlog_recover_process_data(log, rhash, rhead, dp, pass,
buffer_list);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Brian Foster | 177 | 93.16% | 4 | 80.00% |
| Dave Chinner | 13 | 6.84% | 1 | 20.00% |
| Total | 190 | 100.00% | 5 | 100.00% |
STATIC int
xlog_valid_rec_header(
struct xlog *log,
struct xlog_rec_header *rhead,
xfs_daddr_t blkno)
{
int hlen;
if (unlikely(rhead->h_magicno != cpu_to_be32(XLOG_HEADER_MAGIC_NUM))) {
XFS_ERROR_REPORT("xlog_valid_rec_header(1)",
XFS_ERRLEVEL_LOW, log->l_mp);
return -EFSCORRUPTED;
}
if (unlikely(
(!rhead->h_version ||
(be32_to_cpu(rhead->h_version) & (~XLOG_VERSION_OKBITS))))) {
xfs_warn(log->l_mp, "%s: unrecognised log version (%d).",
__func__, be32_to_cpu(rhead->h_version));
return -EIO;
}
/* LR body must have data or it wouldn't have been written */
hlen = be32_to_cpu(rhead->h_len);
if (unlikely( hlen <= 0 || hlen > INT_MAX )) {
XFS_ERROR_REPORT("xlog_valid_rec_header(2)",
XFS_ERRLEVEL_LOW, log->l_mp);
return -EFSCORRUPTED;
}
if (unlikely( blkno > log->l_logBBsize || blkno > INT_MAX )) {
XFS_ERROR_REPORT("xlog_valid_rec_header(3)",
XFS_ERRLEVEL_LOW, log->l_mp);
return -EFSCORRUPTED;
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Nathan Scott | 152 | 85.39% | 1 | 11.11% |
| Dave Chinner | 10 | 5.62% | 2 | 22.22% |
| Christoph Hellwig | 7 | 3.93% | 3 | 33.33% |
| Mark Tinguely | 4 | 2.25% | 1 | 11.11% |
| Timothy Shimmin | 4 | 2.25% | 1 | 11.11% |
| Harvey Harrison | 1 | 0.56% | 1 | 11.11% |
| Total | 178 | 100.00% | 9 | 100.00% |
/*
* Read the log from tail to head and process the log records found.
* Handle the two cases where the tail and head are in the same cycle
* and where the active portion of the log wraps around the end of
* the physical log separately. The pass parameter is passed through
* to the routines called to process the data and is not looked at
* here.
*/
STATIC int
xlog_do_recovery_pass(
struct xlog *log,
xfs_daddr_t head_blk,
xfs_daddr_t tail_blk,
int pass,
xfs_daddr_t *first_bad) /* out: first bad log rec */
{
xlog_rec_header_t *rhead;
xfs_daddr_t blk_no;
xfs_daddr_t rhead_blk;
char *offset;
xfs_buf_t *hbp, *dbp;
int error = 0, h_size, h_len;
int error2 = 0;
int bblks, split_bblks;
int hblks, split_hblks, wrapped_hblks;
struct hlist_head rhash[XLOG_RHASH_SIZE];
LIST_HEAD (buffer_list);
ASSERT(head_blk != tail_blk);
rhead_blk = 0;
/*
* Read the header of the tail block and get the iclog buffer size from
* h_size. Use this to tell how many sectors make up the log header.
*/
if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
/*
* When using variable length iclogs, read first sector of
* iclog header and extract the header size from it. Get a
* new hbp that is the correct size.
*/
hbp = xlog_get_bp(log, 1);
if (!hbp)
return -ENOMEM;
error = xlog_bread(log, tail_blk, 1, hbp, &offset);
if (error)
goto bread_err1;
rhead = (xlog_rec_header_t *)offset;
error = xlog_valid_rec_header(log, rhead, tail_blk);
if (error)
goto bread_err1;
/*
* xfsprogs has a bug where record length is based on lsunit but
* h_size (iclog size) is hardcoded to 32k. Now that we
* unconditionally CRC verify the unmount record, this means the
* log buffer can be too small for the record and cause an
* overrun.
*
* Detect this condition here. Use lsunit for the buffer size as
* long as this looks like the mkfs case. Otherwise, return an
* error to avoid a buffer overrun.
*/
h_size = be32_to_cpu(rhead->h_size);
h_len = be32_to_cpu(rhead->h_len);
if (h_len > h_size) {
if (h_len <= log->l_mp->m_logbsize &&
be32_to_cpu(rhead->h_num_logops) == 1) {
xfs_warn(log->l_mp,
"invalid iclog size (%d bytes), using lsunit (%d bytes)",
h_size, log->l_mp->m_logbsize);
h_size = log->l_mp->m_logbsize;
} else
return -EFSCORRUPTED;
}
if ((be32_to_cpu(rhead->h_version) & XLOG_VERSION_2) &&
(h_size > XLOG_HEADER_CYCLE_SIZE)) {
hblks = h_size / XLOG_HEADER_CYCLE_SIZE;
if (h_size % XLOG_HEADER_CYCLE_SIZE)
hblks++;
xlog_put_bp(hbp);
hbp = xlog_get_bp(log, hblks);
} else {
hblks = 1;
}
} else {
ASSERT(log->l_sectBBsize == 1);
hblks = 1;
hbp = xlog_get_bp(log, 1);
h_size = XLOG_BIG_RECORD_BSIZE;
}
if (!hbp)
return -ENOMEM;
dbp = xlog_get_bp(log, BTOBB(h_size));
if (!dbp) {
xlog_put_bp(hbp);
return -ENOMEM;
}
memset(rhash, 0, sizeof(rhash));
blk_no = rhead_blk = tail_blk;
if (tail_blk > head_blk) {
/*
* Perform recovery around the end of the physical log.
* When the head is not on the same cycle number as the tail,
* we can't do a sequential recovery.
*/
while (blk_no < log->l_logBBsize) {
/*
* Check for header wrapping around physical end-of-log
*/
offset = hbp->b_addr;
split_hblks = 0;
wrapped_hblks = 0;
if (blk_no + hblks <= log->l_logBBsize) {
/* Read header in one read */
error = xlog_bread(log, blk_no, hblks, hbp,
&offset);
if (error)
goto bread_err2;
} else {
/* This LR is split across physical log end */
if (blk_no != log->l_logBBsize) {
/* some data before physical log end */
ASSERT(blk_no <= INT_MAX);
split_hblks = log->l_logBBsize - (int)blk_no;
ASSERT(split_hblks > 0);
error = xlog_bread(log, blk_no,
split_hblks, hbp,
&offset);
if (error)
goto bread_err2;
}
/*
* Note: this black magic still works with
* large sector sizes (non-512) only because:
* - we increased the buffer size originally
* by 1 sector giving us enough extra space
* for the second read;
* - the log start is guaranteed to be sector
* aligned;
* - we read the log end (LR header start)
* _first_, then the log start (LR header end)
* - order is important.
*/
wrapped_hblks = hblks - split_hblks;
error = xlog_bread_offset(log, 0,
wrapped_hblks, hbp,
offset + BBTOB(split_hblks));
if (error)
goto bread_err2;
}
rhead = (xlog_rec_header_t *)offset;
error = xlog_valid_rec_header(log, rhead,
split_hblks ? blk_no : 0);
if (error)
goto bread_err2;
bblks = (int)BTOBB(be32_to_cpu(rhead->h_len));
blk_no += hblks;
/* Read in data for log record */
if (blk_no + bblks <= log->l_logBBsize) {
error = xlog_bread(log, blk_no, bblks, dbp,
&offset);
if (error)
goto bread_err2;
} else {
/* This log record is split across the
* physical end of log */
offset = dbp->b_addr;
split_bblks = 0;
if (blk_no != log->l_logBBsize) {
/* some data is before the physical
* end of log */
ASSERT(!wrapped_hblks);
ASSERT(blk_no <= INT_MAX);
split_bblks =
log->l_logBBsize - (int)blk_no;
ASSERT(split_bblks > 0);
error = xlog_bread(log, blk_no,
split_bblks, dbp,
&offset);
if (error)
goto bread_err2;
}
/*
* Note: this black magic still works with
* large sector sizes (non-512) only because:
* - we increased the buffer size originally
* by 1 sector giving us enough extra space
* for the second read;
* - the log start is guaranteed to be sector
* aligned;
* - we read the log end (LR header start)
* _first_, then the log start (LR header end)
* - order is important.
*/
error = xlog_bread_offset(log, 0,
bblks - split_bblks, dbp,
offset + BBTOB(split_bblks));
if (error)
goto bread_err2;
}
error = xlog_recover_process(log, rhash, rhead, offset,
pass, &buffer_list);
if (error)
goto bread_err2;
blk_no += bblks;
rhead_blk = blk_no;
}
ASSERT(blk_no >= log->l_logBBsize);
blk_no -= log->l_logBBsize;
rhead_blk = blk_no;
}
/* read first part of physical log */
while (blk_no < head_blk) {
error = xlog_bread(log, blk_no, hblks, hbp, &offset);
if (error)
goto bread_err2;
rhead = (xlog_rec_header_t *)offset;
error = xlog_valid_rec_header(log, rhead, blk_no);
if (error)
goto bread_err2;
/* blocks in data section */
bblks = (int)BTOBB(be32_to_cpu(rhead->h_len));
error = xlog_bread(log, blk_no+hblks, bblks, dbp,
&offset);
if (error)
goto bread_err2;
error = xlog_recover_process(log, rhash, rhead, offset, pass,
&buffer_list);
if (error)
goto bread_err2;
blk_no += bblks + hblks;
rhead_blk = blk_no;
}
bread_err2:
xlog_put_bp(dbp);
bread_err1:
xlog_put_bp(hbp);
/*
* Submit buffers that have been added from the last record processed,
* regardless of error status.
*/
if (!list_empty(&buffer_list))
error2 = xfs_buf_delwri_submit(&buffer_list);
if (error && first_bad)
*first_bad = rhead_blk;
return error ? error : error2;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 677 | 68.11% | 5 | 19.23% |
| Brian Foster | 148 | 14.89% | 4 | 15.38% |
| Nathan Scott | 111 | 11.17% | 5 | 19.23% |
| David Chinner | 22 | 2.21% | 2 | 7.69% |
| Dave Chinner | 14 | 1.41% | 3 | 11.54% |
| Eric Sandeen | 7 | 0.70% | 2 | 7.69% |
| Andy Poling | 4 | 0.40% | 1 | 3.85% |
| Chandra Seetharaman | 4 | 0.40% | 1 | 3.85% |
| Timothy Shimmin | 3 | 0.30% | 1 | 3.85% |
| Alex Elder | 2 | 0.20% | 1 | 3.85% |
| Mark Tinguely | 2 | 0.20% | 1 | 3.85% |
| Total | 994 | 100.00% | 26 | 100.00% |
/*
* Do the recovery of the log. We actually do this in two phases.
* The two passes are necessary in order to implement the function
* of cancelling a record written into the log. The first pass
* determines those things which have been cancelled, and the
* second pass replays log items normally except for those which
* have been cancelled. The handling of the replay and cancellations
* takes place in the log item type specific routines.
*
* The table of items which have cancel records in the log is allocated
* and freed at this level, since only here do we know when all of
* the log recovery has been completed.
*/
STATIC int
xlog_do_log_recovery(
struct xlog *log,
xfs_daddr_t head_blk,
xfs_daddr_t tail_blk)
{
int error, i;
ASSERT(head_blk != tail_blk);
/*
* First do a pass to find all of the cancelled buf log items.
* Store them in the buf_cancel_table for use in the second pass.
*/
log->l_buf_cancel_table = kmem_zalloc(XLOG_BC_TABLE_SIZE *
sizeof(struct list_head),
KM_SLEEP);
for (i = 0; i < XLOG_BC_TABLE_SIZE; i++)
INIT_LIST_HEAD(&log->l_buf_cancel_table[i]);
error = xlog_do_recovery_pass(log, head_blk, tail_blk,
XLOG_RECOVER_PASS1, NULL);
if (error != 0) {
kmem_free(log->l_buf_cancel_table);
log->l_buf_cancel_table = NULL;
return error;
}
/*
* Then do a second pass to actually recover the items in the log.
* When it is complete free the table of buf cancel items.
*/
error = xlog_do_recovery_pass(log, head_blk, tail_blk,
XLOG_RECOVER_PASS2, NULL);
#ifdef DEBUG
if (!error) {
int i;
for (i = 0; i < XLOG_BC_TABLE_SIZE; i++)
ASSERT(list_empty(&log->l_buf_cancel_table[i]));
}
#endif /* DEBUG */
kmem_free(log->l_buf_cancel_table);
log->l_buf_cancel_table = NULL;
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 163 | 88.11% | 2 | 28.57% |
| Nathan Scott | 11 | 5.95% | 2 | 28.57% |
| Timothy Shimmin | 5 | 2.70% | 1 | 14.29% |
| Brian Foster | 4 | 2.16% | 1 | 14.29% |
| Mark Tinguely | 2 | 1.08% | 1 | 14.29% |
| Total | 185 | 100.00% | 7 | 100.00% |
/*
* Do the actual recovery
*/
STATIC int
xlog_do_recover(
struct xlog *log,
xfs_daddr_t head_blk,
xfs_daddr_t tail_blk)
{
struct xfs_mount *mp = log->l_mp;
int error;
xfs_buf_t *bp;
xfs_sb_t *sbp;
/*
* First replay the images in the log.
*/
error = xlog_do_log_recovery(log, head_blk, tail_blk);
if (error)
return error;
/*
* If IO errors happened during recovery, bail out.
*/
if (XFS_FORCED_SHUTDOWN(mp)) {
return -EIO;
}
/*
* We now update the tail_lsn since much of the recovery has completed
* and there may be space available to use. If there were no extent
* or iunlinks, we can free up the entire log and set the tail_lsn to
* be the last_sync_lsn. This was set in xlog_find_tail to be the
* lsn of the last known good LR on disk. If there are extent frees
* or iunlinks they will have some entries in the AIL; so we look at
* the AIL to determine how to set the tail_lsn.
*/
xlog_assign_tail_lsn(mp);
/*
* Now that we've finished replaying all buffer and inode
* updates, re-read in the superblock and reverify it.
*/
bp = xfs_getsb(mp, 0);
bp->b_flags &= ~(XBF_DONE | XBF_ASYNC);
ASSERT(!(bp->b_flags & XBF_WRITE));
bp->b_flags |= XBF_READ;
bp->b_ops = &xfs_sb_buf_ops;
error = xfs_buf_submit_wait(bp);
if (error) {
if (!XFS_FORCED_SHUTDOWN(mp)) {
xfs_buf_ioerror_alert(bp, __func__);
ASSERT(0);
}
xfs_buf_relse(bp);
return error;
}
/* Convert superblock from on-disk format */
sbp = &mp->m_sb;
xfs_sb_from_disk(sbp, XFS_BUF_TO_SBP(bp));
xfs_buf_relse(bp);
/* re-initialise in-core superblock and geometry structures */
xfs_reinit_percpu_counters(mp);
error = xfs_initialize_perag(mp, sbp->sb_agcount, &mp->m_maxagi);
if (error) {
xfs_warn(mp, "Failed post-recovery per-ag init: %d", error);
return error;
}
mp->m_alloc_set_aside = xfs_alloc_set_aside(mp);
xlog_recover_check_summary(log);
/* Normal transactions can now occur */
log->l_flags &= ~XLOG_ACTIVE_RECOVERY;
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 139 | 54.94% | 3 | 15.79% |
| Dave Chinner | 86 | 33.99% | 10 | 52.63% |
| Lachlan McIlroy | 12 | 4.74% | 2 | 10.53% |
| Darrick J. Wong | 9 | 3.56% | 1 | 5.26% |
| David Chinner | 4 | 1.58% | 1 | 5.26% |
| Mark Tinguely | 2 | 0.79% | 1 | 5.26% |
| Nathan Scott | 1 | 0.40% | 1 | 5.26% |
| Total | 253 | 100.00% | 19 | 100.00% |
/*
* Perform recovery and re-initialize some log variables in xlog_find_tail.
*
* Return error or zero.
*/
int
xlog_recover(
struct xlog *log)
{
xfs_daddr_t head_blk, tail_blk;
int error;
/* find the tail of the log */
error = xlog_find_tail(log, &head_blk, &tail_blk);
if (error)
return error;
/*
* The superblock was read before the log was available and thus the LSN
* could not be verified. Check the superblock LSN against the current
* LSN now that it's known.
*/
if (xfs_sb_version_hascrc(&log->l_mp->m_sb) &&
!xfs_log_check_lsn(log->l_mp, log->l_mp->m_sb.sb_lsn))
return -EINVAL;
if (tail_blk != head_blk) {
/* There used to be a comment here:
*
* disallow recovery on read-only mounts. note -- mount
* checks for ENOSPC and turns it into an intelligent
* error message.
* ...but this is no longer true. Now, unless you specify
* NORECOVERY (in which case this function would never be
* called), we just go ahead and recover. We do this all
* under the vfs layer, so we can get away with it unless
* the device itself is read-only, in which case we fail.
*/
if ((error = xfs_dev_is_read_only(log->l_mp, "recovery"))) {
return error;
}
/*
* Version 5 superblock log feature mask validation. We know the
* log is dirty so check if there are any unknown log features
* in what we need to recover. If there are unknown features
* (e.g. unsupported transactions, then simply reject the
* attempt at recovery before touching anything.
*/
if (XFS_SB_VERSION_NUM(&log->l_mp->m_sb) == XFS_SB_VERSION_5 &&
xfs_sb_has_incompat_log_feature(&log->l_mp->m_sb,
XFS_SB_FEAT_INCOMPAT_LOG_UNKNOWN)) {
xfs_warn(log->l_mp,
"Superblock has unknown incompatible log features (0x%x) enabled.",
(log->l_mp->m_sb.sb_features_log_incompat &
XFS_SB_FEAT_INCOMPAT_LOG_UNKNOWN));
xfs_warn(log->l_mp,
"The log can not be fully and/or safely recovered by this kernel.");
xfs_warn(log->l_mp,
"Please recover the log on a kernel that supports the unknown features.");
return -EINVAL;
}
/*
* Delay log recovery if the debug hook is set. This is debug
* instrumention to coordinate simulation of I/O failures with
* log recovery.
*/
if (xfs_globals.log_recovery_delay) {
xfs_notice(log->l_mp,
"Delaying log recovery for %d seconds.",
xfs_globals.log_recovery_delay);
msleep(xfs_globals.log_recovery_delay * 1000);
}
xfs_notice(log->l_mp, "Starting recovery (logdev: %s)",
log->l_mp->m_logname ? log->l_mp->m_logname
: "internal");
error = xlog_do_recover(log, head_blk, tail_blk);
log->l_flags |= XLOG_RECOVERY_NEEDED;
}
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 83 | 33.60% | 1 | 9.09% |
| Brian Foster | 68 | 27.53% | 2 | 18.18% |
| Dave Chinner | 56 | 22.67% | 3 | 27.27% |
| Joe Perches | 19 | 7.69% | 1 | 9.09% |
| Nathan Scott | 11 | 4.45% | 1 | 9.09% |
| Eric Sandeen | 7 | 2.83% | 1 | 9.09% |
| Mark Tinguely | 2 | 0.81% | 1 | 9.09% |
| Utako Kusaka | 1 | 0.40% | 1 | 9.09% |
| Total | 247 | 100.00% | 11 | 100.00% |
/*
* In the first part of recovery we replay inodes and buffers and build
* up the list of extent free items which need to be processed. Here
* we process the extent free items and clean up the on disk unlinked
* inode lists. This is separated from the first part of recovery so
* that the root and real-time bitmap inodes can be read in from disk in
* between the two stages. This is necessary so that we can free space
* in the real-time portion of the file system.
*/
int
xlog_recover_finish(
struct xlog *log)
{
/*
* Now we're ready to do the transactions needed for the
* rest of recovery. Start with completing all the extent
* free intent records and then process the unlinked inode
* lists. At this point, we essentially run in normal mode
* except that we're still performing recovery actions
* rather than accepting new requests.
*/
if (log->l_flags & XLOG_RECOVERY_NEEDED) {
int error;
error = xlog_recover_process_intents(log);
if (error) {
xfs_alert(log->l_mp, "Failed to recover intents");
return error;
}
/*
* Sync the log to get all the intents out of the AIL.
* This isn't absolutely necessary, but it helps in
* case the unlink transactions would have problems
* pushing the intents out of the way.
*/
xfs_log_force(log->l_mp, XFS_LOG_SYNC);
xlog_recover_process_iunlinks(log);
xlog_recover_check_summary(log);
xfs_notice(log->l_mp, "Ending recovery (logdev: %s)",
log->l_mp->m_logname ? log->l_mp->m_logname
: "internal");
log->l_flags &= ~XLOG_RECOVERY_NEEDED;
} else {
xfs_info(log->l_mp, "Ending clean mount");
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 70 | 61.40% | 1 | 16.67% |
| David Chinner | 20 | 17.54% | 1 | 16.67% |
| Nathan Scott | 11 | 9.65% | 1 | 16.67% |
| Dave Chinner | 8 | 7.02% | 1 | 16.67% |
| Darrick J. Wong | 3 | 2.63% | 1 | 16.67% |
| Mark Tinguely | 2 | 1.75% | 1 | 16.67% |
| Total | 114 | 100.00% | 6 | 100.00% |
int
xlog_recover_cancel(
struct xlog *log)
{
int error = 0;
if (log->l_flags & XLOG_RECOVERY_NEEDED)
error = xlog_recover_cancel_intents(log);
return error;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Brian Foster | 32 | 96.97% | 1 | 50.00% |
| Darrick J. Wong | 1 | 3.03% | 1 | 50.00% |
| Total | 33 | 100.00% | 2 | 100.00% |
#if defined(DEBUG)
/*
* Read all of the agf and agi counters and check that they
* are consistent with the superblock counters.
*/
void
xlog_recover_check_summary(
struct xlog *log)
{
xfs_mount_t *mp;
xfs_agf_t *agfp;
xfs_buf_t *agfbp;
xfs_buf_t *agibp;
xfs_agnumber_t agno;
__uint64_t freeblks;
__uint64_t itotal;
__uint64_t ifree;
int error;
mp = log->l_mp;
freeblks = 0LL;
itotal = 0LL;
ifree = 0LL;
for (agno = 0; agno < mp->m_sb.sb_agcount; agno++) {
error = xfs_read_agf(mp, NULL, agno, 0, &agfbp);
if (error) {
xfs_alert(mp, "%s agf read failed agno %d error %d",
__func__, agno, error);
} else {
agfp = XFS_BUF_TO_AGF(agfbp);
freeblks += be32_to_cpu(agfp->agf_freeblks) +
be32_to_cpu(agfp->agf_flcount);
xfs_buf_relse(agfbp);
}
error = xfs_read_agi(mp, NULL, agno, &agibp);
if (error) {
xfs_alert(mp, "%s agi read failed agno %d error %d",
__func__, agno, error);
} else {
struct xfs_agi *agi = XFS_BUF_TO_AGI(agibp);
itotal += be32_to_cpu(agi->agi_count);
ifree += be32_to_cpu(agi->agi_freecount);
xfs_buf_relse(agibp);
}
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 189 | 88.73% | 4 | 57.14% |
| Dave Chinner | 20 | 9.39% | 1 | 14.29% |
| Nathan Scott | 2 | 0.94% | 1 | 14.29% |
| Mark Tinguely | 2 | 0.94% | 1 | 14.29% |
| Total | 213 | 100.00% | 7 | 100.00% |
#endif /* DEBUG */
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Hellwig | 7146 | 35.55% | 53 | 20.15% |
| Dave Chinner | 5566 | 27.69% | 77 | 29.28% |
| Brian Foster | 2560 | 12.73% | 28 | 10.65% |
| Darrick J. Wong | 2228 | 11.08% | 9 | 3.42% |
| Nathan Scott | 928 | 4.62% | 21 | 7.98% |
| David Chinner | 539 | 2.68% | 19 | 7.22% |
| Zhi Yong Wu | 260 | 1.29% | 3 | 1.14% |
| Glen Overby | 163 | 0.81% | 1 | 0.38% |
| Alex Elder | 153 | 0.76% | 9 | 3.42% |
| Mark Tinguely | 135 | 0.67% | 4 | 1.52% |
| Timothy Shimmin | 127 | 0.63% | 5 | 1.90% |
| Stephen Lord | 76 | 0.38% | 3 | 1.14% |
| Chandra Seetharaman | 51 | 0.25% | 6 | 2.28% |
| Eric Sandeen | 47 | 0.23% | 10 | 3.80% |
| Russell Cattelan | 46 | 0.23% | 2 | 0.76% |
| Lachlan McIlroy | 24 | 0.12% | 3 | 1.14% |
| Joe Perches | 19 | 0.09% | 1 | 0.38% |
| Jie Liu | 9 | 0.04% | 2 | 0.76% |
| Al Viro | 8 | 0.04% | 1 | 0.38% |
| Jan Kara | 7 | 0.03% | 1 | 0.38% |
| Andy Poling | 4 | 0.02% | 1 | 0.38% |
| Donald Douwsma | 4 | 0.02% | 1 | 0.38% |
| Harvey Harrison | 2 | 0.01% | 1 | 0.38% |
| Utako Kusaka | 1 | 0.00% | 1 | 0.38% |
| Lucas De Marchi | 1 | 0.00% | 1 | 0.38% |
| Total | 20104 | 100.00% | 263 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.