Release 4.12 drivers/gpio/gpio-exar.c
/*
* GPIO driver for Exar XR17V35X chip
*
* Copyright (C) 2015 Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/gpio/driver.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#define EXAR_OFFSET_MPIOLVL_LO 0x90
#define EXAR_OFFSET_MPIOSEL_LO 0x93
#define EXAR_OFFSET_MPIOLVL_HI 0x96
#define EXAR_OFFSET_MPIOSEL_HI 0x99
#define DRIVER_NAME "gpio_exar"
static DEFINE_IDA(ida_index);
struct exar_gpio_chip {
struct gpio_chip gpio_chip;
struct mutex lock;
int index;
void __iomem *regs;
char name[20];
};
static void exar_update(struct gpio_chip *chip, unsigned int reg, int val,
unsigned int offset)
{
struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
int temp;
mutex_lock(&exar_gpio->lock);
temp = readb(exar_gpio->regs + reg);
temp &= ~BIT(offset);
if (val)
temp |= BIT(offset);
writeb(temp, exar_gpio->regs + reg);
mutex_unlock(&exar_gpio->lock);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Sudip Mukherjee | 92 | 100.00% | 1 | 100.00% |
| Total | 92 | 100.00% | 1 | 100.00% |
static int exar_set_direction(struct gpio_chip *chip, int direction,
unsigned int offset)
{
unsigned int bank = offset / 8;
unsigned int addr;
addr = bank ? EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
exar_update(chip, addr, direction, offset % 8);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Sudip Mukherjee | 54 | 100.00% | 1 | 100.00% |
| Total | 54 | 100.00% | 1 | 100.00% |
static int exar_get(struct gpio_chip *chip, unsigned int reg)
{
struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
int value;
mutex_lock(&exar_gpio->lock);
value = readb(exar_gpio->regs + reg);
mutex_unlock(&exar_gpio->lock);
return !!value;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Sudip Mukherjee | 60 | 100.00% | 1 | 100.00% |
| Total | 60 | 100.00% | 1 | 100.00% |
static int exar_get_direction(struct gpio_chip *chip, unsigned int offset)
{
unsigned int bank = offset / 8;
unsigned int addr;
int val;
addr = bank ? EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
val = exar_get(chip, addr) >> (offset % 8);
return !!val;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Sudip Mukherjee | 58 | 100.00% | 1 | 100.00% |
| Total | 58 | 100.00% | 1 | 100.00% |
static int exar_get_value(struct gpio_chip *chip, unsigned int offset)
{
unsigned int bank = offset / 8;
unsigned int addr;
int val;
addr = bank ? EXAR_OFFSET_MPIOLVL_LO : EXAR_OFFSET_MPIOLVL_HI;
val = exar_get(chip, addr) >> (offset % 8);
return !!val;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Sudip Mukherjee | 58 | 100.00% | 1 | 100.00% |
| Total | 58 | 100.00% | 1 | 100.00% |
static void exar_set_value(struct gpio_chip *chip, unsigned int offset,
int value)
{
unsigned int bank = offset / 8;
unsigned int addr;
addr = bank ? EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO;
exar_update(chip, addr, value, offset % 8);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Sudip Mukherjee | 51 | 100.00% | 1 | 100.00% |
| Total | 51 | 100.00% | 1 | 100.00% |
static int exar_direction_output(struct gpio_chip *chip, unsigned int offset,
int value)
{
exar_set_value(chip, offset, value);
return exar_set_direction(chip, 0, offset);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Axel Lin | 37 | 100.00% | 1 | 100.00% |
| Total | 37 | 100.00% | 1 | 100.00% |
static int exar_direction_input(struct gpio_chip *chip, unsigned int offset)
{
return exar_set_direction(chip, 1, offset);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Axel Lin | 25 | 100.00% | 1 | 100.00% |
| Total | 25 | 100.00% | 1 | 100.00% |
static int gpio_exar_probe(struct platform_device *pdev)
{
struct pci_dev *pcidev = platform_get_drvdata(pdev);
struct exar_gpio_chip *exar_gpio;
void __iomem *p;
int index, ret;
if (pcidev->vendor != PCI_VENDOR_ID_EXAR)
return -ENODEV;
/*
* Map the pci device to get the register addresses.
* We will need to read and write those registers to control
* the GPIO pins.
* Using managed functions will save us from unmaping on exit.
* As the device is enabled using managed functions by the
* UART driver we can also use managed functions here.
*/
p = pcim_iomap(pcidev, 0, 0);
if (!p)
return -ENOMEM;
exar_gpio = devm_kzalloc(&pcidev->dev, sizeof(*exar_gpio), GFP_KERNEL);
if (!exar_gpio)
return -ENOMEM;
mutex_init(&exar_gpio->lock);
index = ida_simple_get(&ida_index, 0, 0, GFP_KERNEL);
sprintf(exar_gpio->name, "exar_gpio%d", index);
exar_gpio->gpio_chip.label = exar_gpio->name;
exar_gpio->gpio_chip.parent = &pcidev->dev;
exar_gpio->gpio_chip.direction_output = exar_direction_output;
exar_gpio->gpio_chip.direction_input = exar_direction_input;
exar_gpio->gpio_chip.get_direction = exar_get_direction;
exar_gpio->gpio_chip.get = exar_get_value;
exar_gpio->gpio_chip.set = exar_set_value;
exar_gpio->gpio_chip.base = -1;
exar_gpio->gpio_chip.ngpio = 16;
exar_gpio->regs = p;
exar_gpio->index = index;
ret = devm_gpiochip_add_data(&pcidev->dev,
&exar_gpio->gpio_chip, exar_gpio);
if (ret)
goto err_destroy;
platform_set_drvdata(pdev, exar_gpio);
return 0;
err_destroy:
ida_simple_remove(&ida_index, index);
mutex_destroy(&exar_gpio->lock);
return ret;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Sudip Mukherjee | 274 | 100.00% | 1 | 100.00% |
| Total | 274 | 100.00% | 1 | 100.00% |
static int gpio_exar_remove(struct platform_device *pdev)
{
struct exar_gpio_chip *exar_gpio = platform_get_drvdata(pdev);
ida_simple_remove(&ida_index, exar_gpio->index);
mutex_destroy(&exar_gpio->lock);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Sudip Mukherjee | 42 | 100.00% | 1 | 100.00% |
| Total | 42 | 100.00% | 1 | 100.00% |
static struct platform_driver gpio_exar_driver = {
.probe = gpio_exar_probe,
.remove = gpio_exar_remove,
.driver = {
.name = DRIVER_NAME,
},
};
module_platform_driver(gpio_exar_driver);
MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_DESCRIPTION("Exar GPIO driver");
MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>");
MODULE_LICENSE("GPL");
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Sudip Mukherjee | 820 | 92.97% | 1 | 50.00% |
| Axel Lin | 62 | 7.03% | 1 | 50.00% |
| Total | 882 | 100.00% | 2 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.