Release 4.12 drivers/hwmon/g760a.c
  
  
  
/*
 * g760a - Driver for the Global Mixed-mode Technology Inc. G760A
 *         fan speed PWM controller chip
 *
 * Copyright (C) 2007  Herbert Valerio Riedel <hvr@gnu.org>
 *
 * Complete datasheet is available at GMT's website:
 * http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
enum g760a_regs {
	
G760A_REG_SET_CNT = 0x00,
	
G760A_REG_ACT_CNT = 0x01,
	
G760A_REG_FAN_STA = 0x02
};
#define G760A_REG_FAN_STA_RPM_OFF 0x1 
/* +/-20% off */
#define G760A_REG_FAN_STA_RPM_LOW 0x2 
/* below 1920rpm */
/* register data is read (and cached) at most once per second */
#define G760A_UPDATE_INTERVAL (HZ)
struct g760a_data {
	
struct i2c_client *client;
	
struct mutex update_lock;
	/* board specific parameters */
	
u32 clk; /* default 32kHz */
	
u16 fan_div; /* default P=2 */
	/* g760a register cache */
	
unsigned int valid:1;
	
unsigned long last_updated; /* In jiffies */
	
u8 set_cnt; /* PWM (period) count number; 0xff stops fan */
	
u8 act_cnt; /*   formula: cnt = (CLK * 30)/(rpm * P) */
	
u8 fan_sta; /* bit 0: set when actual fan speed more than 20%
                     *   outside requested fan speed
                     * bit 1: set when fan speed below 1920 rpm
                     */
};
#define G760A_DEFAULT_CLK 32768
#define G760A_DEFAULT_FAN_DIV 2
#define PWM_FROM_CNT(cnt)	(0xff-(cnt))
#define PWM_TO_CNT(pwm)		(0xff-(pwm))
static inline unsigned int rpm_from_cnt(u8 val, u32 clk, u16 div)
{
	return ((val == 0x00) ? 0 : ((clk*30)/(val*div)));
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Herbert Valerio Riedel | 40 | 95.24% | 1 | 50.00% | 
| Jean Delvare | 2 | 4.76% | 1 | 50.00% | 
| Total | 42 | 100.00% | 2 | 100.00% | 
/* read/write wrappers */
static int g760a_read_value(struct i2c_client *client, enum g760a_regs reg)
{
	return i2c_smbus_read_byte_data(client, reg);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Herbert Valerio Riedel | 23 | 100.00% | 1 | 100.00% | 
| Total | 23 | 100.00% | 1 | 100.00% | 
static int g760a_write_value(struct i2c_client *client, enum g760a_regs reg,
			     u16 value)
{
	return i2c_smbus_write_byte_data(client, reg, value);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Herbert Valerio Riedel | 28 | 100.00% | 1 | 100.00% | 
| Total | 28 | 100.00% | 1 | 100.00% | 
/*
 * sysfs attributes
 */
static struct g760a_data *g760a_update_client(struct device *dev)
{
	struct g760a_data *data = dev_get_drvdata(dev);
	struct i2c_client *client = data->client;
	mutex_lock(&data->update_lock);
	if (time_after(jiffies, data->last_updated + G760A_UPDATE_INTERVAL)
	    || !data->valid) {
		dev_dbg(&client->dev, "Starting g760a update\n");
		data->set_cnt = g760a_read_value(client, G760A_REG_SET_CNT);
		data->act_cnt = g760a_read_value(client, G760A_REG_ACT_CNT);
		data->fan_sta = g760a_read_value(client, G760A_REG_FAN_STA);
		data->last_updated = jiffies;
		data->valid = 1;
	}
	mutex_unlock(&data->update_lock);
	return data;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Herbert Valerio Riedel | 119 | 94.44% | 1 | 50.00% | 
| Axel Lin | 7 | 5.56% | 1 | 50.00% | 
| Total | 126 | 100.00% | 2 | 100.00% | 
static ssize_t fan1_input_show(struct device *dev,
			       struct device_attribute *da, char *buf)
{
	struct g760a_data *data = g760a_update_client(dev);
	unsigned int rpm = 0;
	mutex_lock(&data->update_lock);
	if (!(data->fan_sta & G760A_REG_FAN_STA_RPM_LOW))
		rpm = rpm_from_cnt(data->act_cnt, data->clk, data->fan_div);
	mutex_unlock(&data->update_lock);
	return sprintf(buf, "%d\n", rpm);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Herbert Valerio Riedel | 89 | 98.89% | 1 | 50.00% | 
| Julia Lawall | 1 | 1.11% | 1 | 50.00% | 
| Total | 90 | 100.00% | 2 | 100.00% | 
static ssize_t fan1_alarm_show(struct device *dev,
			       struct device_attribute *da, char *buf)
{
	struct g760a_data *data = g760a_update_client(dev);
	int fan_alarm = (data->fan_sta & G760A_REG_FAN_STA_RPM_OFF) ? 1 : 0;
	return sprintf(buf, "%d\n", fan_alarm);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Herbert Valerio Riedel | 54 | 98.18% | 1 | 50.00% | 
| Julia Lawall | 1 | 1.82% | 1 | 50.00% | 
| Total | 55 | 100.00% | 2 | 100.00% | 
static ssize_t pwm1_show(struct device *dev, struct device_attribute *da,
			 char *buf)
{
	struct g760a_data *data = g760a_update_client(dev);
	return sprintf(buf, "%d\n", PWM_FROM_CNT(data->set_cnt));
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Herbert Valerio Riedel | 44 | 97.78% | 1 | 50.00% | 
| Julia Lawall | 1 | 2.22% | 1 | 50.00% | 
| Total | 45 | 100.00% | 2 | 100.00% | 
static ssize_t pwm1_store(struct device *dev, struct device_attribute *da,
			  const char *buf, size_t count)
{
	struct g760a_data *data = g760a_update_client(dev);
	struct i2c_client *client = data->client;
	unsigned long val;
	if (kstrtoul(buf, 10, &val))
		return -EINVAL;
	mutex_lock(&data->update_lock);
	data->set_cnt = PWM_TO_CNT(clamp_val(val, 0, 255));
	g760a_write_value(client, G760A_REG_SET_CNT, data->set_cnt);
	mutex_unlock(&data->update_lock);
	return count;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Herbert Valerio Riedel | 98 | 89.91% | 1 | 20.00% | 
| Axel Lin | 8 | 7.34% | 1 | 20.00% | 
| Guenter Roeck | 1 | 0.92% | 1 | 20.00% | 
| Julia Lawall | 1 | 0.92% | 1 | 20.00% | 
| Frans Meulenbroeks | 1 | 0.92% | 1 | 20.00% | 
| Total | 109 | 100.00% | 5 | 100.00% | 
static DEVICE_ATTR_RW(pwm1);
static DEVICE_ATTR_RO(fan1_input);
static DEVICE_ATTR_RO(fan1_alarm);
static struct attribute *g760a_attrs[] = {
	&dev_attr_pwm1.attr,
	&dev_attr_fan1_input.attr,
	&dev_attr_fan1_alarm.attr,
	NULL
};
ATTRIBUTE_GROUPS(g760a);
/*
 * new-style driver model code
 */
static int g760a_probe(struct i2c_client *client,
			const struct i2c_device_id *id)
{
	struct device *dev = &client->dev;
	struct g760a_data *data;
	struct device *hwmon_dev;
	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
		return -EIO;
	data = devm_kzalloc(dev, sizeof(struct g760a_data), GFP_KERNEL);
	if (!data)
		return -ENOMEM;
	data->client = client;
	mutex_init(&data->update_lock);
	/* setup default configuration for now */
	data->fan_div = G760A_DEFAULT_FAN_DIV;
	data->clk = G760A_DEFAULT_CLK;
	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
							   data,
							   g760a_groups);
	return PTR_ERR_OR_ZERO(hwmon_dev);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Herbert Valerio Riedel | 102 | 81.60% | 1 | 33.33% | 
| Axel Lin | 20 | 16.00% | 1 | 33.33% | 
| Guenter Roeck | 3 | 2.40% | 1 | 33.33% | 
| Total | 125 | 100.00% | 3 | 100.00% | 
static const struct i2c_device_id g760a_id[] = {
	{ "g760a", 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, g760a_id);
static struct i2c_driver g760a_driver = {
	.driver = {
		.name	= "g760a",
        },
	.probe	  = g760a_probe,
	.id_table = g760a_id,
};
module_i2c_driver(g760a_driver);
MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
MODULE_DESCRIPTION("GMT G760A driver");
MODULE_LICENSE("GPL");
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Herbert Valerio Riedel | 786 | 87.63% | 1 | 10.00% | 
| Axel Lin | 93 | 10.37% | 3 | 30.00% | 
| Guenter Roeck | 8 | 0.89% | 3 | 30.00% | 
| Julia Lawall | 7 | 0.78% | 1 | 10.00% | 
| Jean Delvare | 2 | 0.22% | 1 | 10.00% | 
| Frans Meulenbroeks | 1 | 0.11% | 1 | 10.00% | 
| Total | 897 | 100.00% | 10 | 100.00% | 
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.